Changing to power-saving results in losing picture on the screeen

Hi,
Product name: HP Pavilion dv6-6093ex Entertainment Notebook PC support.
Product number: LM610EA#A2N
When changing to power-saving GPU, then Radeon got disabled and no picture on the screeen is shown.
I really had been facing a problem with my Windows 7 Home premium 64Bit, then I have only done a repair install, which
didn't delete all the drivers and programs. However, before doing the repair install, I was recommended to uninstall AMD
Readon and Intel(R) Management Engine Interface.(AS shown below). Thus, I have uninstalled the AMD Readon, and Intel(R)Management Engine Interface.
Upgrading Windows will affect the following devices and/or programs: 
These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these
devices. Cancel the upgrade, open Control Panel and search for "update device drivers", or go to the device manufacturer's
website to search for updated drivers.
System devices: Intel(R) Management Engine Interface
These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.)
ATI Catalyst Control Center *
When the repair install got completed, then I found that Grphics adapter is still functining well since there are no ! mark in front of the adapters: Intel(R) HD Graphics Family and Radeon(TM) HD 6770M in the device manager.
Once I changed the GUP from High-performance GPU to Power-saving GPU, then I lost the pircuter on the Screen.
When I lost the picuter on the screen while on Windows in normal mode, I booted to the safe mode, then opened the device manager, and I saw that Radeon(TM) HD 6770M was disabled
To get picture again,  I enabled Radeon(TM) HD 6770M (screen shot below) while in Safe mode: 
When restarting my PC and started Windows in the noraml mode,  the picture returned on the screeen.
Whenever changing to power-saving GPU, then the same problem happens.
Will I need to reinstall the AMD High-Definition Graphics Driver, although there are no ! mark in front of the Intel(R) HD Graphics Family and Radeon(TM) HD 6770M  in the device manager?

Thank you so much indeed,
Could you please take some of your precious time out to really answer these questions below of mine?
Firstly:: I really have run this Utility(amdcleanuputility) to remove all components of the prvious installation of AMD Radeon and Mobile Inte Graphics.
I was propmted that  tool will do as it is shown below in the screen shot.
I agreed. Then, it completed. Is 'AMD cleanup utility' recommended by you?
Then, the graphics adapters in the device manager became as follows:
Secondly: I think that it is now the point to reinstall AMD High-Definition Graphics Driver_Software Packaging Numbr(SP55092)_Driver Version 8.882.2.3000.
Thirdly: Moreover, I would be saying that I lost the audio on my System once the (amdcleanuputility) has completed, although its icon is still intact(screen shot below)
Must I need to reinstall IDT High-Definition (HD) Audio Driver_Sp55094_Version6.10.6345.0????
Finally::  in your link about downloading the drivers for my product name. I found Driver-Graphics (5) . However, all what I need is the finall one which is an already-downloaded file with me. Could you please let me know what about the other four graphics drivers????????

Similar Messages

  • "Saved Result Sets" message when using the raplace wizard in the Admin Tool

    Hi,
    I'm just trying to replace an existing Essbase source with a new one in my Business Model using the replace wizard. )It's a cube with > 1.5k account members so I'm really not looking forward to doing that manually).
    So far all migrations have worked fine, but somehow this time after specifying which tables to use for the replace, instead of showing me a list of columns which will be changed, the wizard throws a "Saved Result Sets" message and just hangs. Every time I hit "Finish" the message appears again.
    Here's a screenshot .
    Anyone ever came across this?
    PS: what's up with the links these days? Jive acting up again?
    Edited by: Christian Berg on Feb 10, 2010 2:57 PM

    Update: looks like the wizard is really overwhelmed with big cubes (1.5k accounts, 20 dims @ approx 10 generations each) and just breaks.
    I haven't figured out the exact limit, but I'm able to migrate pack of about 8 dims at a time as long as I leave the accounts dim out and do that on itself.
    Cheers,
    C.

  • Power based Profile or Losing sight of the Memory Card

    When my Blackberry 8310 is plugged into its USB cable and I've put the password in to enable the 'memory stick' it operates a different sound profile. ie, the ringtone used for phone and text notification changes.
    I think it is something to do with whether the Balckberry OS can or cannot see the memory card but I've not been able to determine the exact rules. It seems to lose site of the ring tones on the memory card when enabled so uses a ring tone other than the one I've set.
    I've looked for user instructions or further guidance without any luck so thought I would post on this forum to see what expereince others had.
    Regards

    when your device is used as a memory card reader, the memory card is accessible by your PC only.
    => your device can't access what is on the card.
    if you want to keep the ringtones while connected as USB, copy them to the internal memory of your device.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Book Module---I have spent 3 days trying to edit the book I am in the process of making. None of the changes are ever saved even after I go to the Preview area and create book. IHow do I save the changes in my editing ?

    I have been trying to edit my Book and have worked three days trying to save the edits. Every time I leave the LR Program, and return to it, my edits are unchanged. The Adobe instructions say to Save the Book by clicking on the Preview, then Create Book dialog box, then name the Book, and click Create. Every time I do this I have a new name in the left panel with nothing in it for photos. I am frustrated...please help. I am sure I am doing something stupid.

    I am having the EXACT same problem and am so frustrated I am about to go to one of the web services to create my book!!!  Help!!!

  • Using both power saving mode and offline mode caus...

    So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
    Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
    I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
    I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
    I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
    Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
    This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
    If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
    Any help?
    Rob
    PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

    I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
    I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
    http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
    I believe it is a firmware bug that causes this problem.

  • Power saving mode / and broadband disconnecting pe...

    I have recently started using the power saving mode and noticed that our BB speed has gone down to 2.4 from 2.9.  While I know this is not a big reduction we had a lot of problems earlier in the year with V04 messages cos our speed dropped to around 2 and it took a lot of engineers visits to get it back up to 2.9.  Also I noticed that our HH keeps disconnecting (at the moment it says it's been connected for 2 days) although this has been happening since we signed up to BT and not since using the power save mode..   
    Do you think it is the power saving mode or the fact that the HH keeps disconnecting periodically that is resulting in our speed reducing?  I would really appreciate your help as I desperately want to avoid getting the dreaded V04 error messages!
    Thanks
    Debbie

    Hi the variations in your speed are being caused by the restarts of your hub nothing toowith power saving mode you need to find the causes of thedisconections
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Symbain Anna N8 is slower w/ the power saving mode...

    For some reason, the N8 seems a bit slower with the powersaving mode disabled
    For example, it takes a bit more extra time to open an app with the rotating dial at the center, whereas if I were to open the same app with the powersaving mode turned on, the same app would open right away without any delays.
    I am mostly okay with leaving the phone on the power saving mode, except that I use the "always on clock" function on my N8. And there is no way to enable the always on clock without turning off the battery saving mode..
    And of course it goes without saying, but I have formatted my device multiple times and with the same result. There is currently 40gb of free space on my N8 w/ the micro sd slot filled, so it is not like the phone has storage issue either.
    All the latest upgrade to the phone have been installed (Symbian Belle is not avaiable in Canada, where I live in)
    My mother also has a Nokia N8 and she also has this issue, although she prefers the powersaving mode anyways.
    Any help with this issue? I just want to have a "always on clock" while keeping my phone in the battery saving mode
    or somehow make the the N8  w/ the power saving mode disabled, as fast as the same phone w/ the powersaving mode enabled".
    I do not care about battery life, since I can already get enough battery w/ the powersaving mode disabled.

    Nokia Situations, which you can get at http://betalabs.nokia.com/apps/nokia-situations will give you the functionality you desire. I'v attached a screenshot showing that both Power saving and Vibratating alert can be selected together.
    The idea of the app is to automatically switch profiles according to preselected conditions, so if you can predict when you need your phone to be in power saving mode (eg during work hours) you can set it up accordingly, but if not you can also select the profile in the normal way from the first homescreen.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5
    Attachments:
    Scr000096.jpg ‏30 KB

  • MSI X79A-GD45 8D overclocking 3930k question about Power Saving Features

    hi guys
    i could do the oc for my 3930k.Now i am on 4.3ghz.Here are the settings i made ;
    i didnt change the cpu multiplier left it on auto.
    EIST and Turbo features are on.I just change the multpliers of the core limits for every core.I made core limit 43 for all cores.
    Also i set the vcore offset feature to %12.5 and it made the voltage under load 1.280 which can hold system stable @ 4.3ghz.
    when cpu is idle multiplier and voltage decreasing and when the cpu is under load voltages and multipliers increase.
    thats what i want.  But;
    i tested the vcore offset as %100 the auto voltage under load increases to max 1.344.If i go for 4.8ghz probably i would need more than 1.344 on this situation what will happen?because i will need more than 1.344 but the auto voltage will give me just 1.344.How can we arrange this?
    then i tried to enter voltage manually but the voltage didnt decrease even all the power saving features on.I haven't change any settings  i mentioned above for the 4.3ghz oc.I just changed the vcore voltage to manuel. Everything stayed the same like decreasing multiplier under idle and increasing multipliers under load except the voltage.It stayed the same as i gave in the bios.
    from here
    I read from somewhere that on msi boards if you put the cpu multipler manually you loose power saving features.Everytime under load or idle cpu will be stay at the same ghz.Is that true?
    if i give the cpu multiplier manuel or vcore voltage can i benefit from the power saving features like  decreasing voltages and multiplier under idle and  and incresing them under load ?
    or when i enter the cpu multiplier and voltage manually ,does the power saving features go away?

    Quote from: Froggy Gremlin on 29-November-12, 19:15:02
    VDroop set to 100% is all you are going to get. 1.344v's should get you about 44-46X on the cores on 'Auto'. The voltage goes down from there with the lower VDroop settings. With CPU V. set to 'Auto', you get power saving, soon as the CPU V. is taken out of 'Auto', you lose it. No, the CPU speed may lower, but the voltage going to it will not.
    VDroop is not a true offset feature like can be found on other brands of boards. https://forum-en.msi.com/index.php?topic=162779.0
    Most folks around the industry recognize 1.350v's as the recommended limit for socket 2011 CPU's, so 1.344v's is fairly close to that anyway.
    So when i set the voltage and the cpu multiplier i loose power saving features right?
    Thanks for the reply

  • Changes are not saved

    After making changes to my iWeb site, I have re-published as well as saved all to .mac. However, the changes are not saved. How can I save the changes?

    KHCrowley,
    Welcome to Apple's discussions.
    Try clearing your browser cache, and then take another look. The changes are most likely there.
    Mark

  • I have a new MacBook Pro with iPhoto installed.  I edit photos, mainly photo orientation via rotating, but when I go back to run a slideshow the changes weren't saved and the photo is back to vertical...please help...thanks

    I have a new MacBook Pro with Iphoto installed when purchased.  When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation.  However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved.  Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM

    what version of iPhoto and of the OS?
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • Bootcamp 5.1.5621 - power saving not working

    I've this mac: iMac 27 - mid 2010 - 11.3 : S/N CK0390HUDNR - Boot Rom IM112.0057.B01 - EFI 1.8 SMC 1.59F2
    With latest bootcamp, power saving not working !
    I enable the display power off after 10 minuts
    Display power off BUT there's no way to power on !
    Apple... any help ?? (hoping some apple tech looking discussions..)
    Regards
    Mauro

    look on the page
    it list which macs the zip support
    if yours in not on the list use
    is it on the list? Boot Camp Support Software 5.1.5621
    or is it on this list Boot Camp Support Software 5.1.5640

  • Is there any settings for motorola bc4 bluetooth power saving on Presario CQ56?

    I bought a Gigabyte Bloetooth mouse (M7700B) and it is work fine, but If I stop to move the mouse for a while (2-5s), than at the next movement the cursor wont start for a few seconds. Like the cursor stucks.
    I have read an article, about this problem, and there was writen, this is because the bluetooth device power saving. In tis article was suggested, to turn off power saving on bluetotth device, but on the controll panel, thre is nothing to set.
    If anybody has some information about this, tel me.
    Thanks and sorry for my English
    Sandor

    It's an idea, Scott, but I haven't heard that anyone has implemented it.
    There are a number of other options that various people have noted would be handy to have "on" when running on AC and "off" when running on battery, or vice versa. We can all think of some of them. Send feedback to Apple:
    http://www.apple.com/feedback/macosx.html

  • N85: 'Unable to Deactivate Power Saving Mode'

    Hi,
    My N85 currently shows power saving mode (the battery icon has a moon symbol overlaid), and when I plug in any charger, i get the message 'Charging' followed by a message 'Unable to Deactivate Power Saving Mode'.
    The same message appears if I press the power button and select 'Deactivate power saving'. The message remains even though the battery is 100% charged.
    The phone appears to be working normally with full 3G connection, Wireless, Bluetooth etc all able to be controlled manually or via the profile.
    So...
    Did I do something to force the phone to stay in power saving mode? How do I remove this message? What effect does Power Saving mode have?
    Thanks for any clues!
    Solved!
    Go to Solution.

    deep power saving mode is basically the mode when you battery runs low in order to preserve power, the phone shuts down all possible applications, reduces power to the screen in power saving mode you can still use the basic functions, but it should only go into the power saving mode when the battery is actually near empty its an awesome feature, but must be a bug in this case since you state that the battery is full, glad you found a solution
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • MOVED: MSI X79A-GD45 8D overclocking 3930k question about Power Saving Features

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=163826.0

    Quote from: Froggy Gremlin on 29-November-12, 19:15:02
    VDroop set to 100% is all you are going to get. 1.344v's should get you about 44-46X on the cores on 'Auto'. The voltage goes down from there with the lower VDroop settings. With CPU V. set to 'Auto', you get power saving, soon as the CPU V. is taken out of 'Auto', you lose it. No, the CPU speed may lower, but the voltage going to it will not.
    VDroop is not a true offset feature like can be found on other brands of boards. https://forum-en.msi.com/index.php?topic=162779.0
    Most folks around the industry recognize 1.350v's as the recommended limit for socket 2011 CPU's, so 1.344v's is fairly close to that anyway.
    So when i set the voltage and the cpu multiplier i loose power saving features right?
    Thanks for the reply

  • NASA's Astronomy Picture of the Day & iCal

    I have set up an automator workflow to have NASA's Astronomy Picture of the Day (APOD) as my desktop image. It would automatically change each day via iCal. AWSOME PICTURES, by the way.
    I have a snag . . . iCal isn't running the workflow . . . I had to use spotlight & click on the application to start the workflow today.
    To originally set this up, I selected "iCal Alarm" from the plug-in list so that Automator can create an appointment for this workflow as a daily event. I chose 3:00 AM as the start time.
    I checked iCal preferences, and found the "day" start & end times where 8 AM & 6 PM. Could this be the reason why the workflow didn't start when I turned my computer at 5 AM today?
    Also, I'm Wireless, & connect to the internet manually each time . . . I'm wondering if the workflow gets snagged because I don't have an internet connection automatically with start-up?
    KenMackay
    1.25 GHz Power Mac G4; 1.33 GHz G4 iBook   Mac OS X (10.4.3)  

    The Automator, as plug in, and iCal works perfectly at the alotted time. The only snag is that I have to be internet connected at the time the program is sheduled to run. I am wireless, & opt to manually "click in" to the internet at each start up. So, if I start up the computer
    ii after the scheduled workflow start
    , the Automator kicks in immediately to play catch up, but quites as soon as it can't connect to the URL . I can't connect to the internet fast enough, manually, to accommodate the Automator workflow.
    I'm wondering if I have my wireless connection
    ii connect
    at start up, Automator won't be interupted & the APOD will appear at start up, even if I start my computer a little
    ii after
    the iCal workflow start.
    Kenmackay
    1.25 GHz Power Mac G4; 1.33 GHz G4 iBook   Mac OS X (10.4.2)  

Maybe you are looking for