Changing VISA Synchronous state

Trying to change VISA read/write synchronous state.
LabVIEW Help says to right click on the node and select the mode you want (Synchronous I/O Mode).
I right click on it, See that "Synchronous" is checked, and because it is easier or built into my mouse memory I just re-assert the click on and choose "Synchronous", except that when I do that, it changes it to Asynchronous. It behaves as if any choosing of the Synchronous I/O Mode just toggles the state, instead of actually setting the state to what you chose.
This does not seem logical to me. Am I doing this right, or is there some other problem going on here?

I see what you're saying. Any click on either of the two pull-rights toggles the current selection.
I will agree that the semantics of the menu could be better, but as a practical matter it's below my threshold
The icon changes to include the watchface glyph when the node is set to asynch, so I only right-click on it when I want to change it. And it's waaay better than back in the days of yore, when it was a global app preference (syncVISA=TRUE, IIRC).
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

Similar Messages

Problem changing VISA synchronous state

This seems to be a bug. Can I get a CAR number for this?
http://forums.ni.com/t5/LabVIEW/Changing-VISA-Synchronous-state/m-p/2358338#M735511
Trying to change VISA read/write synchronous state.
LabVIEW Help says to right click on the node and select the mode you want (Synchronous I/O Mode).
I right click on it, See that "Synchronous" is checked, and because it is easier or built into my mouse memory I just re-assert the click on and choose "Synchronous", except that when I do that, it changes it to Asynchronous. It behaves as if any choosing of the Synchronous I/O Mode just toggles the state, instead of actually setting the state to what you chose.
This does not seem logical to me. Am I doing this right, or is there some other problem going on here?

Hi Warren,
I looked at the issue you have described and filed a CAR. The CAR number is 399613.
Regards,
Arham H
Applications Engineer
National Instruments

Synchronized statements and deadlock

I've been reading on the tutorial about synchronized statements:
http://java.sun.com/docs/books/tutorial/essential/concurrency/locksync.html
...and I don't understand when it says, about the following example:
    public void addName(String name) {
        synchronized(this) {
            lastName = name;
            nameCount++;
        nameList.add(name);
    }"In this example, the addName method needs to synchronize changes to lastName and nameCount, but also needs to avoid synchronizing invocations of other objects' methods. (Invoking other objects' methods from synchronized code can create problems that are described in the section on Liveness.) "
Why do I need to avoid synchronizing invocations of nameList object? When thread1 gets an instrinsic lock to the instance of this class, does it also get a lock on the nameList object?
I suppose they're saying that I should avoid synchronizing invocations of nameList object to avoid deadlock, but I can't see how a deadlock would occur here.
I've read about deadlock but the example on the tutorial seams a different case to me because that example puts to objects crossing data between each other.
Another doubt is: in the deadlock example, which is found here
http://java.sun.com/docs/books/tutorial/essential/concurrency/deadlock.html
thread1 invokes synchronized method "bow" on object alphonse, while thread2 invokes that same method on object gaston. Does this garantee that the methods will not interleave? Doesn't it have to be the same object being used on both threads?
Quoting the same tutorial: "It is not possible for two invocations of synchronized methods on the same object to interleave."
Help appreciated on clarifying this.

>
If you use the first bit of code and make another block to synchronize on nameList then you could have another method that synchronizes inside on nameList and that could deadlock if it also needs to synchronize on this.
I'm still confused. If I had in MyClass
public void addName(String name) {
    synchronized(this) {
        lastName = name;
        nameCount++;
        nameList.add(name);
}which I understand is equivalent to
public void synchronize addName(String name) {
        lastName = name;
        nameCount++;
        nameList.add(name);
}and then I had
public void removeName(String name) {
    synchronized(this) {
        lastName = null;
        nameCount--;
        nameList.remove(name);
}then when thread1 invoked myClass.addName(someString) would acquire a lock on myClass and thread2, invoking myClass.removeName(someString) would have to wait for thread1 to conclude. It doesn't seam to be nothing wrong on this to me...
Please help.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

How can I create a navigation bar in the template so I can change the down state of a button on a page made from the template in DW3?

We're creating pages from a template in DW3. The template includes a header, footer and a navigation bar. We've made the navigation bar an editable region so that we can change the down state of the buttons on pages where it is required. However, when we make a new page from the template and try to change the behaviors of the buttons in the navigation bar it will not allow us to make those changes.

Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Can a button change to another state and remain there, and also go to a URL?

Hi --
I've been wracking my brain and scouring the internet since yesterday to find a solution to this...It seems easy enough, but I'm at a loss...maybe I'm over thinking it and it's simply not possible?
We have a button that we want to, when clicked, change to another state, remain there, and also use a navto to go to another page within the publication...is this possible?
We've tried doubling up the actions of the button, using fake buttons, etc. all without success. What we have it at now is...you can tap to navto, and the button does change, but it reverts back to it's previous state in that moment between releasing the button and actually jumping to the page we want it to go to.
The only explanation I've come up with is based on the information on this page: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html -- that because the two actions I want to accomplish fall into the two different categories: Supported actions for hyperlink buttons and Supported actions for slideshow buttons, that this simply isn't possible?
Your help is greatly appreciated!
Thanks,
Kristina

No, that's not supported with multiple actions. You can't switch a state and then jump to another document.

Change base view state from a custom component

I'm pretty new to flex and I'm having a small issue in change the view state from a component.
My Application have 2 custom components called userlogin and main menu. In the main application page I have userlogin component in one state and the main menu component in another. I'm trying to change the state if the login in successful from user login to main menu. I have the following function written inside the login component.
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
This code worked when I had all the controls in the main page. But then I created components and included them in to components and now when the login is success, its giving the following error.
ArgumentError: Undefined state 'MainMenu'.
    at mx.core::UIComponent/getState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UI Component.as:9908]
    at mx.core::UIComponent/findCommonBaseState()[E:\dev\4.0.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9928]
    at mx.core::UIComponent/commitCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:9750]
    at mx.core::UIComponent/setCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\ core\UIComponent.as:9701]
    at mx.core::UIComponent/set currentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UIComponent.as:6087 ]
    at components::UserLoginForm/__btnSubmit_click()[C:\Projects\WarrantyAutomation\src\componen ts\UserLoginForm.mxml:60]
I'm sure this has something to do with accessing the states from a custom component, but I do not know how to change the state to the main menu. Please help me with this. Any help is greatly appriciated.

Hi dasun1981,
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
If I am right the above function is in your userlogin component and the two components "userlogincomponent" and "maincomponent" are in main application file and the states were also defined in main application file.
But in the function above the currentState refers to the state of the userlogin component and not the main application ...but the states are defined in main application file...that's the reason why the exception was thrown...
Instead you replace the line in the above function with the below line:
Application.application.currentState = "MainMenu";
Please mark it as answer if it helped you.
Thanks,
Bhasker Chari

Invalid request for a change in window state

Ok...
Creating a JSR168 portlet and it works fine in Pluto, but I get the following when I deploy to P7:
ERROR: Content not available. REASONE: Invalid request for a change in window state
Here is what the portlet is supposed to do:
* Display a form
* User clicks find
* Lookup is performed
* Window state in processAction() method of portlet is changed to MAXIMIZED
* I'm guessing this is where the error is occuring
I also think that for the TableContainer, I have some sort of attribute incorrect having to do with one of the channelsIs values.
I tried toggling them one way or another without any effect.
Suggestions?

Ive run into this issue also. I need a way for a portlet to change to its maximized state for the purposes of user registration. Is there anyway this can be done? I know that sun jsp "Providers" which are shown on their example desktop, have some sort of maximized state that they can go into, but im not sure how to use this in a portlet.
There seems to be very inconsistent support between the proprietary sun provider api, and the portlet api.

Documents remain in "To be synchronized" state

Hi All,
I have created an index and attached a data source to it. This datasource consists of 5 text documents.
When I re-index the datasource, all 5 documents always remain in "To be synchronized" state. Repeated re-indexing is also of no use.
I have flushed the queue a number of times, restarted the portal and trex instance and performed re-indexing. Yet, all these documents do not move from "To be synchronized" state at all.
I am not able to figure out where the problem is.
Any suggestions on this?
Thanks in advance,
Pavithra

Hi All,
We have found the solution. In the Queue parameters, the parameter "Initial Indexing Mode" was set to ON. On resetting it to Off, the documents were optimized and all of them are in OK state.
Hope this answer helps those who might face the same problem.
Regards,
Pavithra

Portal not synchronized statements of BW

Hi
Portal integration with BW after the completion of, SAP portal not synchronized statements of BW, as BW update a report after the display of the portal not timely
I think the problem is due to JCO parameter ,The current parameter settings is
Maximal Pool Size:25
Maximum Connections:50
Connection Timeout(msec):60
Maximum Waiting Time(msec):50
How to solve this problem？ Thank you!

Hi,
Can you please explain in detail about the question "Synchronized statement of BW".
Thanks
Nishant

Post install problem. Changes to the state or options of DB SUSDB can't be made at this time. DB Is in single-user mode.

Hi,
Have you ever come across this problem before.
Changes to the state or options of DB SUSDB can't be made at this time. DB Is in single-user mode and a user is currently connected to it.
It's preventing the post WSUS installation task from completing.
I opted to use the WID Database option and it created the SUSDB.
How can I resolve it?
Thanks

this sounds similar to some issues that occurred when KB2720211 was first release (the update does put the DB into single-user mode, to perform some tasks, then switches it back into multi-user mode. sometimes, that switch-back was not performed, and the
DB was left in single-user mode).
You can refer to this thread, the steps are buried in there.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/531d576b-eeaf-40dc-9057-b3adbde6186f/kb2720211-debacle-is-this-acceptable-microsoft-quality?forum=winserverwsus
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Disk health state dont change OS health state

Hi,
Scenario: SCOM 2012 R2 UR4.
The health state of a disk in a given server dont change the health state at OS.
The health state at disk is warning, but the health state at OS is OK.
The questions are:
Is this behavior normal?
How to configure health state at OS to be the same at disk?
Thanks in advance!

As of i have seen even i have seen such situations in my SCOM 2007 R2 where it shows Healthy event if there are multiple Monitors in a critical state.
Based on my understanding SCOM calculates based on the Dependency monitor.
Example: Best state and worst state.
1.So may be even though that disk related issue is there but that totally does not affect the Health of the Agent.
2.In case if there is any specific service named Service 1 which is in a critical state and there is Service 2 and if Service 2 has also become critical because it depends on Service 1. So because of 1 service multiple services are in a non healthy state,
Then if this is the case at that time the agent may change to a critical state in the dashboard.
May be your current situation is like example 1 and not like example 2 so you are still getting the state as Healthy in the Dashboard.
=============================
Any one please correct me if i am wrong.
Gautam.75801

Locale Input changes on Mac OS X Lion when changing the view state

On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
        <![CDATA[
            protected function gototest2(event:MouseEvent):void
                this.currentState = "test2";
            protected function gototest(event:MouseEvent):void
                this.currentState = "test";
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="test" />
        <s:State name="test2" />
    </s:states>
    <s:Button label="go to test" includeIn="test2" click="gototest(event)" />
    <s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
    <s:TextInput includeIn="test2" />
</s:WindowedApplication>

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.

My id not change visa to none?

My id not change visa to none

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
None is not an option in all Countries and/or Regions.

Changing VISA Synchronous state

Similar Messages

Maybe you are looking for