Channel with no read interest closing

So say I'm using NIO, and I have a SocketChannel. On the channel's key I've temporarily set no interest in OP_READ, because I don't yet have the correct object to deal with de-serializating the byte stream. Now say that, while I've disabled OP_READ, the remote end of the channel closes the channel, ending the connection. Will I receive the close signal (through reading -1 bytes on the channel) only when I again set interest in OP_READ? (Assume that, on the channel's key, no interest is set on any other operation such as OP_WRITE.)
Thanks,
shadowmatter

You will receive the -1 whenever you call read() regardless of OP_READ. However your own program logic may determine that you only call read() when you get OP_READ - this is up to you.

Similar Messages

  • As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

    As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

    Hello Claus,
    you could have a look here: http://helpx.adobe.com/security/products/flash-player/apsb14-13.html  and in german language http://www.chip.de/downloads/Adobe-Reader_12998358.html
    In all These cases Google could be "your friend".
    Hans-Günter

  • [svn:bz-trunk] 13716: since include-read-only is a server global setting, we can't have two channels with different value.

    Revision: 13716
    Revision: 13716
    Author:   [email protected]
    Date:     2010-01-22 09:26:12 -0800 (Fri, 22 Jan 2010)
    Log Message:
    since include-read-only is a server global setting, we can't have two channels with different value.  remove the test for the include-read-only false.  update the service-config.xml as well.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml
        blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ReadOn lyTest.mxml

    You can give this a try on your Ultimate machine.  While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having.  Hope it works for you.
    The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
    The other problem is the Minimum Session Security for NTVLM SSP based Clients.
    To get around this:
    1.     In Vista, open the Control Panel
    2.     Switch to "Classic" view
    3.     Double-click Administration Tools
    4.     Double-click Local Security Policy
    5.     Or Secpol.msc
    6.     Expand "Local Policies" and select "Security Options"
    7.     Alternate : Type secpol.msc to get editor up then
    8.     Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
    9.     Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
    10.     Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
    11.     Change the setting from "require 128 bit" to unchecked (No Minimum)
    12.     Click OK
    the real difference between vista and windows 7 procedure is 10 and 11

  • I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

    I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

    My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
    Next, run Disk Utility and ask it to repair the hard drive.

  • How can I read two channels with fieldpoint and labview

    I'm trying to read two or more channels with the TC 120, and I follow the examples of sopport page, but doesn't work.
    What can I do?

    For more information about reading or writing to or from multiple channels in Fieldpoint, please refer to:
    How Do I Read or Write to Multiple Channels on a Fieldpoint Module in LabVIEW?
    This should enable you to read multiple channels. The only other option available is to use one fp open.vi, multiple Create Tag.vi's and multiple FP Tag Read.vi's.

  • Several DAQmx Channels with Start and Clear Task VI's

    Hi,
    I'm trying to read in several DAQmx channels in a while loop. When I just place the channels within the while loop and connect them directly to the read VI's, everything is fine. But I read in the help, that this will slow down my system, because it's opening and closing the task each cycle. So I used Start Task and Clear Task VI's to open and clear them before and after the loop. But now it's only reading one of my channels in, although I wired all of them in exactly the same manner. Anyone has an idea, what I did wrong?
    Thanks,
    Miclas
    Attachments:
    Save&Stop DAQ.JPG ‏87 KB

    You would have seen the error if you had wired up and error indicator.
    You cannot run multiple tasks of the same type (i.e. an analog input) at the same time. What you read about stopping and closing tasks is correct but it was the only way your program could work. What you don't realize is that you can have multiple channels with a single task. If you used a physical channel constant, it would be something like 'dev1/ai0:2' if you had consecutive channels or 'dev1/ai0, dev1/ai2' for non-consecutive. Global channels are done in a similar fashion. You would have 'FSR1, FSR2, Knee Angle', etc.

  • Could not establish trust relationship for the SSL/TLS secure channel with authority SharePoint ssis connectors

    Hi All,
    I am using SharePoint List Connectors to load the data from Sharepoint list to  Sql server.
    I have created an ssis package and attached to the SQL agent job in works fine
    SharePoint Source dev url : http://company.dev.com (working fine)(http)
    DB server:(server\instance)
    I thought all i good and can test with the uat sharepoint url.
    I have changed the configuration url yo point to uat.(https)
    SharePoint Source dev url : https://companyuat.dev.com (working fine)
    DB server:(server\instance)
    Suddently it fails when  with the following error:
    In both the cases i am running the agent job from the same db server
    DB server:(server\instance)
    Error Message:
    Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. --->  System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
    ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
    Source: Data Flow Task SharePoint List Source [1] Description: System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException:
    The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.  
    Is there is workaround to reslove this?Any inputs highly appreciated as it is time to move to production :(.
    Thanks
    Ravi
    Ravi

    This is the important error: The remote certificate is invalid according to the validation procedure.
    Your SharePoint server certificate is invalid. You have to either correct your certificate or make your SSIS client machine explicitly trust the server certificate.
    SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

  • My ipad2 has gone haywire with apps opening and closing pictures flashing on safari history messages, key board etc. I have tried rebooting it to no avail.

    My Ipad 2 is possessed. I was reading a book when the pages started flipping on hteir own, with apps opening and closing. I did a cold boot, but it was no help. No, it has not gotten wet.

    Sounds like a hardware problem. Contact Apple Support.

  • Question on text message notifications with imessage open vs closed with  iOS7

    Before the upgrade to iOS7.1 when I received a text message my phone would vibrate both when the application was closed to nofify me of the message and when the application is open (I am looking at the text message) and then when another text would come through with the application still open the phone would vibrate again. Now that I have upgraded to iOS7.1 when the application for text messages is open and someone continues to text me while I am reading the other texts the phone barely (hardly able to feel it at all) vibrates. The problem is that if I leave the application open and am not looking at the phone then I don't realize texts are coming through. Anyway to fix this? I have power cycled the phone, checked all settings (that I can find) and turned off notifications and then back on again and still nothing.
    Ideas?
    Didn't have this issue before the upgrade.. Phone would vibrate the same with application open or closed. Would like that again.

    I have the same thing happening. Any help would be appreciated!

  • Open PDF Attachment with Adobe Reader put GW to background

    Hello all,
    We have problems with opening pdf attachments from GroupWise client 12.02 with Adobe Reader 11.0.06. The attachment opens fine, but when opening the attachment, the mail and GroupWise client immediately are placed to the background in Windows. So when closing Adobe Reader, the user won't come back in the mail but in another application that was open and the user have to click on groupwise in the taskbar to go back to the mail.
    There is no problem with opening other attachments from other applications (like Word or Excel) or when opening the pdf with Adobe Standard. It happens with every user.
    They are working in a Citrix Xenapp 6.5 environment on Windows 2008R2 (it also happens if working in a RDS session)
    Any thoughts?
    Regards,
    Jaap

    In article <[email protected]>, Jhpoot wrote:
    > They are working in a Citrix Xenapp 6.5 environment on Windows 2008R2
    > (it also happens if working in a RDS session)
    >
    Are you trying to say that all of the apps mentioned are running as
    XENapps? If not please specify which are local vs remote.
    What is the client OS being run as that may also factor in.
    Worth trying another PDF reader such as FoxIT reader to better see
    which side is driving that behaviour.
    Andy of
    KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

  • US & Canada's Reader Store closed. Migrate to Kobo-

    Reader Store: Your Transition to Kobo
    This is the last email received from Reader Store on how to migrate with a personal link:
    "Dear Reader Store Customer,
    On March 20, 2014, Sony's Reader Store closed and we are now transferring customers to Kobo, where you can continue to access and read the eBooks you purchased from Reader Store.
    We are fully committed to helping you through this exciting transition to Kobo. With the Kobo Store, you'll have more than 4 million of the world's best eBooks, magazines, comics, and kids' titles at your fingertips.
    You can transfer your library to Kobo by following these 2 simple steps:
    1. Click on the personalized, unique link below. Please note that this link is for your library only and should not be shared with anyone else.
       Account Name XXXXXXX
       h t t p s://kobobooks.com/SonyMigrate?token=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    2. Click "Get Started," and then sign in with an existing Kobo account or create a new Kobo account.
    You'll then see a list of all of your eBooks that transferred from Sony to Kobo.
    Remember, as long as you complete this process by May 31, 2014, any remaining Reader Store credits you have in your account will also transfer to your Kobo account. Sony's Reader for PC/MAC software has been updated to link directly to the Kobo Store. You will now be able to purchase, download, read and transfer Kobo eBooks to your Sony Reader via USB. An initial update for the PRS-T1, PRS-T2 and PRS-T3 Reader devices is expected in April, with additional purchase functionality coming in late May.
    This will be the last communication from Sony regarding the transfer to Kobo. In the future, you may receive reminder notices from Kobo to transfer your library if you haven't completed the process. You may opt out of the Kobo service messages at any time.
    Should you encounter any issues with this process or have any additional questions, please see Kobo's FAQ here http://it.kobo.com/sony?utm_source=sonyNA  or contact Kobo's customer support department.Click here for  http://www.kobo.com/help their contact information.
    Thank you for reading with us! It has been our pleasure to have you in our reading community.
    Sincerely,
    The Reader Store Team"
    Jannis
    PS
    Sony's Reader Store and Support on how to migrate:
    https://ebookstore.sony.com/
    https://us.en.kb.sony.com/app/answers/detail/a_id/45014
    Solved!
    Go to Solution.

    Hi “dawnseymour87”
    If you read carefully all my previous posts and “links”, I think, perhaps, you could find an answer!
    Anyway…
    Read carefully Sony’s Support info: https://us.en.kb.sony.com/app/answers/detail/a_id/45014  
    “…Will I still be able to re-download my previous purchases?
    Yes. Whether or not you transfer to Kobo, you can download eBooks you previously purchased at Reader Store until April 30, 2014. However, if you transfer your eBook library to Kobo via the transfer link, you will continue to have access to your eBooks after this date.
    In a few rare cases, eBooks purchased at Reader Store may not be available at Kobo for re-download. In these situations, it is recommended that you download a copy of these titles from Reader Store before April 30, 2014…”
    “…How can I download a previously purchased eBook?
    http://ebooks.custhelp.com/app/answers/detail/a_id/80  ...”
    Read this post of mine (previous post in this thread)
    http://community.sony.com/t5/Reader-Electronic-Reader/US-amp-Canada-s-Reader-Store-closed-Migrate-to...  
    On https://ebookstore.sony.com/  (in your account) you can find on which “email address” they have sent the email (If they had sent one!).
    On “Ebook Customer Support” http://ebooks.custhelp.com/ ,
    on Reader’s Store Blog  http://blog.sony.com/2014/02/the-future-of-reader-store/ and
    on Kobo http://www.kobo.com/sony?utm_source=sonyNA
    more help and answers.
    On “Ebook Customer Support” ’s  “Contact us” link
    http://ebooks.custhelp.com/app/answers/detail/a_id/93 ,
    you can find email address - phone number - chat in order to get in contact with Reader’s Store Staff. They must answer on your questions!
    “The below information pertains to U.S. and Canada support queries…
    …If you still need assistance, you can contact us by https://s01.esupport.sony.com/US/perl/contact-email.pl (email), http://www.docs.sony.com/startchat.asp?modelnum=&chat=1 (chat), or phone at 877-263-2863.
    Chat and phone support are available during the hours of:
    Monday – Friday           8:00 am - Midnight ET
    Saturday and Sunday   9:00 am - 8:00 pm ET
    We look forward to helping you!...”
    Jannis

  • When on internet my iMac keeps going to gray screen with message reading 'You are not connected to the internet'. My wireless connection is fine for my other devices, why does my iMac keep losing connection with network?

    I have read other post about this and one of them said to uncheck "enable auto channel scan" in my router settings and chang from chanel 6 to 5.  I was able to change the channel to 5 but i can't find anywhere on their page where it has the option to uncheck "enable auto channel scan".  I have a Netgear router WGT624 v3.  Can anyone recomend anything?

    I've had this problem for months and finally called Apple support and paid the one time support fee to get a solution.  I purchased a 21.5" iMac in the summer of 2011 and am currently running OS X 10.7.3.  After confirming all my wifi settings were correct (already suspected this, since every other wireless device in the house works great), the Apple support tech recommended changing channels on my router from "Enable Auto Channel Scan" to one channel out of the 11 available.  I currently have a D-Link DIR-655 router, but the tech said the same structure exists on all wireless routers.  In other words, my situation would not improve if I bought an Apple router (Airport Extreme, Time Capsule, etc).  I logged into my router (here are common IP addresses for routers...  http://compnetworking.about.com/od/workingwithipaddresses/f/getrouteripaddr.htm , and made the channel preference change (in my case, unchecked "enable auto channel scan" and changed from channel 6 to channel 5).  It's been a few days since applying this change and so far, I haven't lost my connectivity. Even though I live in a residential subdivision (not an apartment / condo), my iMac is detecting up to 21 other local networks and this was causing interference (some of my neighbors using the same channel).   Sure enough, when I check the channels of nearby networks, I find many are using channel 6 and no one is using channel 5.  To find out what nearby network channels are being used, go to Apple icon in top left, "about this Mac", "more info", "system report", under network choose "wifi", scroll down and see other wifi network info.  Changing the router channel from auto enable to a specific channel has improved both my internet connectivity and speed (not sharing same channel with neighbors).  Hope this helps!

  • Continued problems with Adobe Reader 9.3.1

    Adobe Reader stops at the half-way mark in the progress block when loading a form to print.  Cannot get this fixed. Does anyone out there have a fix for this.  Is Adobe even recognizing that there is a problem with this.  Error message keeps telling me that there is a problem with Adobe Reader, exit and try again.

    I haven't been able to print any .pdf files since I downloaded 9.3.
    My message says Internet Explorer has closed it down because of data executable files.  I've changed my DEF settings to allow
    Adobe Reader but it still doesn't work.  I never had any problems before with newer versions.

  • VIEW won't display channels with same names

    Hello,
    We have recently installed DIAdem 2010 and are beginning to find channel name problems that we didn't have before with 9.1.
    Traditionally we have always set the name-oriented channel references to 'only channel name' and we have never had any problems when displaying multiple traces in VIEW. Now, we find that when we display more than one trace in VIEW with channel names that are repeated we get problems with the axis system display dialogue box. This dialogue box tells me that the X and Y channel names AND NUMBERS are the same for all three traces when in fact the data displayed is different. If I try and change one of the channels it immediately reverts back to the first channel with that name.
    I have attached a screen dump to help explain. The image shows a VIEW window with three speed time histories from three separate data files that have been loaded together. The three X channels will all be named 'time' but will be channel numbers 1, 4 and 7. The Y channnels are all 'speed km\h' and are numbered 2, 5 and 8. However, the dialogue box shows that all three traces are made from channels 1 and 2 despite the three traces appearing different. If I change one of the 'time' channels from number 1 to, say, number 4, then it reverts back to number 1 as soon as I move the focus to somewhere else in the box. Version 9.1 never had this problem.
    If I swith the name-oriented channel references to '[group index]/channel name' then the problem goes away - even thought the data displayed in the graph is the same!
    I'm not entirely clear on the reasons for settling on 'name only' references - probably historical - but I am even less clear on the effect of switching to '[group index]/channel name', particularly with the many autosequences that we use.
    Is this a bug that can be fixed?
    Regards, Si.
    Attachments:
    VIEW.jpg ‏236 KB

    Simon,
    The DataFinder is a database that DIAdem installs that integrates directly into the NAVIGATOR, so that you can easily query data files/groups/channels or compile properties from multiple files into correlated curves on a graph, etc.  You might be interested in the ability to look inside your data files in the NAVIGATOR to see the group/channel structure and their properties.  This is particularly interesting if you wan to load selected groups/channels from one or more files.
    Here are the feature description files,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    New Features from DIAdem 9.1 to 2010.zip ‏69 KB

  • RpcOut: couldn't open channel with RPCI protocol

    callservicesd and soagent using very CPU and memory.
    in console, I get the error message as "RpcOut: couldn't open channel with RPCI protocol"
    Lots of these error messages logged
    (com.apple.imdmessageservices.IMDMessageServicesAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    Some issue with messages app and Skype app - when I launch them - they get to hung state.
    PRAM reset, reboot in safe mode, restore from back up before this started and ran check disk using utilities - all tried.
    Still the problem continues.
    Fan spins and continues till the laptop is shutdown.
    Hardware Overview:
      Model Name: MacBook Air
      Model Identifier: MacBookAir5,2
      Processor Name: Intel Core i7
      Processor Speed: 2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 8 GB
      Boot ROM Version: MBA51.00EF.B02
      SMC Version (system): 2.5f9
      Serial Number (system): C02J74FPDRVG
      Hardware UUID: 6A4E07EC-B46D-5AF8-BD8F-F6554AAF7AC0
    Hardware Overview:

    I don't get anything with mccon in the search
    Below is all the logs in the console. Let me know if this helps.
    4/18/15 9:00:15.956 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:00:27.640 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:00:28.265 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:00:32.159 PM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[1912]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
    4/18/15 9:00:39.621 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:00:51.772 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:00:52.378 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 9:01:00.555 PM com.apple.xpc.launchd[1]: (com.apple.AddressBook.abd) Service only ran for 3 seconds. Pushing respawn out by 7 seconds.
    4/18/15 9:01:17.583 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:44.006 PM com.apple.xpc.launchd[1]: assertion failed: 14D136: launchd + 163781 [7F885D63-B284-3471-B6E3-172489232C37]: 0xe
    4/18/15 10:01:44.006 PM com.apple.xpc.launchd[1]: assertion failed: 14D136: launchd + 163781 [7F885D63-B284-3471-B6E3-172489232C37]: 0xe
    4/18/15 10:01:49.896 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:55.400 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:55.949 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:59.350 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:59.389 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:01:59.871 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:00.360 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:08.803 PM com.apple.xpc.launchd[1]: (com.apple.AddressBook.abd) Service only ran for 3 seconds. Pushing respawn out by 7 seconds.
    4/18/15 10:02:15.418 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:32.070 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:44.786 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:45.537 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:02:56.379 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:03:07.791 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:03:08.501 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:03:18.117 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:03:39.431 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:01.349 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:15.925 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:16.437 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:24.106 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:37.842 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:38.326 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:04:46.050 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:05:07.269 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:05:28.475 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:05:42.116 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:05:42.588 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:05:50.333 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:11.496 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:33.236 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:40.766 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:46.857 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:47.325 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:06:55.009 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:07:08.683 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:07:09.171 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:07:17.058 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:07:38.272 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:07:59.502 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:08:13.195 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:08:13.725 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    4/18/15 10:08:28.088 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.

Maybe you are looking for