RpcOut: couldn't open channel with RPCI protocol

callservicesd and soagent using very CPU and memory.
in console, I get the error message as "RpcOut: couldn't open channel with RPCI protocol"
Lots of these error messages logged
(com.apple.imdmessageservices.IMDMessageServicesAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
Some issue with messages app and Skype app - when I launch them - they get to hung state.
PRAM reset, reboot in safe mode, restore from back up before this started and ran check disk using utilities - all tried.
Still the problem continues.
Fan spins and continues till the laptop is shutdown.
Hardware Overview:
  Model Name: MacBook Air
  Model Identifier: MacBookAir5,2
  Processor Name: Intel Core i7
  Processor Speed: 2 GHz
  Number of Processors: 1
  Total Number of Cores: 2
  L2 Cache (per Core): 256 KB
  L3 Cache: 4 MB
  Memory: 8 GB
  Boot ROM Version: MBA51.00EF.B02
  SMC Version (system): 2.5f9
  Serial Number (system): C02J74FPDRVG
  Hardware UUID: 6A4E07EC-B46D-5AF8-BD8F-F6554AAF7AC0
Hardware Overview:

I don't get anything with mccon in the search
Below is all the logs in the console. Let me know if this helps.
4/18/15 9:00:15.956 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:00:27.640 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:00:28.265 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:00:32.159 PM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[1912]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
4/18/15 9:00:39.621 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:00:51.772 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:00:52.378 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 9:01:00.555 PM com.apple.xpc.launchd[1]: (com.apple.AddressBook.abd) Service only ran for 3 seconds. Pushing respawn out by 7 seconds.
4/18/15 9:01:17.583 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:44.006 PM com.apple.xpc.launchd[1]: assertion failed: 14D136: launchd + 163781 [7F885D63-B284-3471-B6E3-172489232C37]: 0xe
4/18/15 10:01:44.006 PM com.apple.xpc.launchd[1]: assertion failed: 14D136: launchd + 163781 [7F885D63-B284-3471-B6E3-172489232C37]: 0xe
4/18/15 10:01:49.896 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:55.400 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:55.949 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:59.350 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:59.389 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:01:59.871 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:00.360 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:08.803 PM com.apple.xpc.launchd[1]: (com.apple.AddressBook.abd) Service only ran for 3 seconds. Pushing respawn out by 7 seconds.
4/18/15 10:02:15.418 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:32.070 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:44.786 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:45.537 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:02:56.379 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:03:07.791 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:03:08.501 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:03:18.117 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:03:39.431 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:01.349 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:15.925 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:16.437 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:24.106 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:37.842 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:38.326 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:04:46.050 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:05:07.269 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:05:28.475 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:05:42.116 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:05:42.588 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:05:50.333 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:11.496 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:33.236 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:40.766 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:46.857 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:47.325 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:06:55.009 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:07:08.683 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:07:09.171 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:07:17.058 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:07:38.272 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:07:59.502 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:08:13.195 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:08:13.725 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
4/18/15 10:08:28.088 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.

Similar Messages

  • HT4623 I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

    I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • HT2506 Hello I'm unable to open any pdf's with preview window opens up with message file couldn't be opened because you don't have permission to view it (none of the pdf's have any security thanks if you can assist

    Hello this week I'm unable to open any pdf's with preview, when I select to open a window opens up with message "file couldn't be opened because you don't have permission to view it" none of the pdf's have any security thanks if you can assist

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Couldn't open module bitmap and pcidata

    hi all! i just finished to install, updating and configuring ARCH 0.7.1.
    I installed fluxbox, nvidia drivers but when i type startx comes up an xorg error log which says me that cannot find bitmap and pcidata modules..
    Xorg is at 7.0 version and i tried remove-reinstall but nothing solved..
    Here is the log
    Thanks a lot for your precious help!!
    X Window System Version 7.0.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 7.0
    Build Operating System:Linux 2.6.15-ARCH i686
    Current Operating System: Linux myhost 2.6.16-ARCH #1 SMP PREEMPT Mon Apr 24 23:11:22 CEST 2006 i686
    Build Date: 20 March 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 30 21:12:24 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "XkbRules" "xorg"
    (**) XKB: rules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (WW) Option "XkbLayout" requires an string value
    (**) Option "XkbVariant" "nodeadkeys"
    (**) XKB: variant: "nodeadkeys"
    (==) Keyboard: CustomKeycode disabled
    (**) |-->Input Device "USB Mouse"
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
    (WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic").
    (WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (WW) FontPath is completely invalid. Using compiled-in default.
    (==) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (**) ModulePath set to "/usr/X11R6/lib/modules"
    (**) Option "AllowMouseOpenFail" "true"
    Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.8
    X.Org XInput driver : 0.5
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (WW) Warning, couldn't open module bitmap
    (II) UnloadModule: "bitmap"
    (EE) Failed to load module "bitmap" (module does not exist, 0)
    (II) LoadModule: "pcidata"
    (WW) Warning, couldn't open module pcidata
    (II) UnloadModule: "pcidata"
    (EE) Failed to load module "pcidata" (module does not exist, 0)
    Fatal server error:
    Unable to load required base modules, Exiting...
    (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
    (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

    stonecrest wrote:Does your /etc/X11/xorg.conf have the right path for the modules directory? Since it looks like your fonts path is wrong, I'm guessing your modules path is wrong as well. If you upgraded to xorg7 from 6.*, you have to make some changes.
    yes i upgraded from 6.8 to 7.0! i solved with a
    xorgconfig
    just now but..in the future..what i have to change if i upgrade from 6 to 7? is not enough run again
    hwd -x
    to create a new xorg.conf for the new xorrg 7.0?

  • Open Channel in Campaign execution

    dear experts,
    i want to used the open channel in campagin execution for sending message to the other system. basicly it will generate the xml file in the server.
    in order to do that, i made a badi implementation of CRM_MKT_EXP_CAMP_DAT and made some code in its method EXPORT_CAMPAIGN_DATA.
    beside that i also add a new communication channel in campaign execution.
    and for the form, i made a form with general usage and plain text type.
    i test the badi in campaign by selecting 'Target Group to Channel' in the menus after select the target segment.
    in the testing, i faced an error and if i trace the error using tx SLG1 there is 2 messages found, that is:
    1. <number> partners in the target group is not contacted
    2. error determining call times for open channel for target group
    is there any clue why i face this error ?
    is there any documentation for implementing the open channel in campaign ?
    please help
    many thanks in advance
    eddhie

    Hi.
    Go to SPRO: CRM > Marketing > Marketing Planning and Campaign Management > Campaign Execution > Define Communication Medium
    Here if you are on CRM 7.0 release you already have a communication medium of example: ACTV, that generates documents of type 0010.
    You must create your own communication medium, with communication method "Generate contact" and indicate which transaction type should be generated. In your case, set here your visit document type.
    Then you create a campaign for this communication method, assign a target group and execute campaign.
    After job execution if you check the last documents created on CRMD_ORDERADM_H table, you will see the generated visits.
    Regards.
    Susana Messias

  • I couldn't open my iTunes and now I can't install iTunes

    Hi, I couldn't open my iTunes last week. I kept getting an error message and a note saying it would send a report to apple. My friends suggested uninstalling iTunes and reinstalling it so, I followed the steps from this link (http://support.apple.com/kb/HT1224) to uninstall iTunes. When I tried installing iTunes I got the following message "There were errors with the installation. You may want to try installing again. (Huge exclamation point) The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." I have tried a few times to reinstall and have had gotten this message every single time. Also, when I tried backing up my iTunes library incase I had to reboot my computer, everything that was purchased from the iTunes store had an error message behind it. My Amazon music was fine and copied over problem free, but my iTune music was very wishy-washy. I'm at a loss about what to do now. Does anyone know what to do?

    There is a knowledge base article devoted to this already. Do you still have a technical issue you need help with?
    iOS: Troubleshooting Wi-Fi networks and connections

  • (JE 3.2.44) Couldn't open file

    Hello!
    We recently upgraded to newer version of BDB JE, and failed with random, but weird issue:
    17/Oct/2007 04:49:38 ERROR [pool-97-thread-2] - com.sleepycat.je.DatabaseException: (JE 3.2.44) Database r
    elations_database14269 id=26 rootLsn=0xffffffff/0xffffffff  IN type=DBIN/2 id=29976291 not expected on INL
    ist
    com.sleepycat.je.DatabaseException: (JE 3.2.44) Database relations_database14269 id=26 rootLsn=0xffffffff/
    0xffffffff  IN type=DBIN/2 id=29976291 not expected on INList
            at com.sleepycat.je.evictor.Evictor.selectIN(Evictor.java:511)
            at com.sleepycat.je.evictor.Evictor.evictBatch(Evictor.java:354)
            at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:249)
            at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:274)
            at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:684)
            at com.sleepycat.je.Cursor.close(Cursor.java:262)
            at com.sleepycat.je.Cursor.close(Cursor.java:250)
            at com.sleepycat.je.Database.putInternal(Database.java:667)
            at com.sleepycat.je.Database.put(Database.java:609)
            at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.saveRelations(BDBJEStorage.java:361)
            at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.update(BDBJEStorage.java:396)
            at com.redwerk.webcrawler.storage.url.RetryHandlingStorageDecorator.update(RetryHandlingStorageDec
    orator.java:159)
            at com.redwerk.webcrawler.storage.url.CountHandlingStorageDecorator.update(CountHandlingStorageDec
    orator.java:86)
            at com.redwerk.webcrawler.filter.record.UrlProcessedFilter._accept(UrlProcessedFilter.java:34)
            at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:23)
            at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
            at com.redwerk.webcrawler.Crawler.addRecord(Crawler.java:731)
            at com.redwerk.webcrawler.ConsumerThread.run(ConsumerThread.java:301)
            at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:44
    2)
            at edu.emory.mathcs.backport.java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
            at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:135)
            at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.
    java:990)
            at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:531)
            at java.lang.Thread.run(Thread.java:595)
    17/Oct/2007 04:49:38 ERROR [pool-97-thread-4] - com.sleepycat.je.DatabaseException: (JE 3.2.44) fetchTarge
    t of 0x1d3/0x472b30 parent IN=32738188 lastFullVersion=0x1d3/0x479cdc parent.getDirty()=true state=2 com.s
    leepycat.je.log.LogFileNotFoundException: (JE 3.2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't open file db/000
    001d3.jdb: db/000001d3.jdb (No such file or directory)
    com.sleepycat.je.DatabaseException: (JE 3.2.44) fetchTarget of 0x1d3/0x472b30 parent IN=32738188 lastFullV
    ersion=0x1d3/0x479cdc parent.getDirty()=true state=2 com.sleepycat.je.log.LogFileNotFoundException: (JE 3.
    2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't open file db/000001d3.jdb: db/000001d3.jdb (No such file or dire
    ctory)
            at com.sleepycat.je.tree.ChildReference.fetchTarget(ChildReference.java:143)
            at com.sleepycat.je.tree.DIN.getDupCountLN(DIN.java:147)
            at com.sleepycat.je.dbi.CursorImpl.lockDupCountLN(CursorImpl.java:2409)
            at com.sleepycat.je.tree.Tree.insertDuplicate(Tree.java:2703)
            at com.sleepycat.je.tree.Tree.insert(Tree.java:2652)
            at com.sleepycat.je.dbi.CursorImpl.putLN(CursorImpl.java:1004)
            at com.sleepycat.je.dbi.CursorImpl.put(CursorImpl.java:1027)
            at com.sleepycat.je.Cursor.putAllowPhantoms(Cursor.java:871)
            at com.sleepycat.je.Cursor.putNoNotify(Cursor.java:808)
            at com.sleepycat.je.Cursor.putInternal(Cursor.java:762)
            at com.sleepycat.je.Database.putInternal(Database.java:663)
            at com.sleepycat.je.Database.put(Database.java:609)
            at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.saveRelations(BDBJEStorage.java:361)
            at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.update(BDBJEStorage.java:396)
            at com.redwerk.webcrawler.storage.url.RetryHandlingStorageDecorator.update(RetryHandlingStorageDec
    orator.java:159)
            at com.redwerk.webcrawler.storage.url.CountHandlingStorageDecorator.update(CountHandlingStorageDec
    orator.java:86)
            at com.redwerk.webcrawler.filter.record.UrlProcessedFilter._accept(UrlProcessedFilter.java:34)
            at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:23)
            at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
            at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
            at com.redwerk.webcrawler.Crawler.addRecord(Crawler.java:731)
            at com.redwerk.webcrawler.ConsumerThread.run(ConsumerThread.java:301)
            at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:44
    2)
            at edu.emory.mathcs.backport.java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
            at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:135)
            at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.
    java:990)
            at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:531)
            at java.lang.Thread.run(Thread.java:595)
    Caused by: com.sleepycat.je.log.LogFileNotFoundException: (JE 3.2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't
    open file db/000001d3.jdb: db/000001d3.jdb (No such file or directory)
            at com.sleepycat.je.log.LogManager.getLogSource(LogManager.java:760)
            at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:594)
            at com.sleepycat.je.log.LogManager.get(LogManager.java:735)
            at com.sleepycat.je.tree.ChildReference.fetchTarget(ChildReference.java:135)
            ... 27 moreWe checked our code and found we are not doing any removal of JE files at this stage (we had to implement removal of JE files BEFORE thread start to avoid cases when corrupted environment causes current task to not start, probably there's a better way? However this is definitely not a cause of the error, because removal is performed before environment is created)
    The je.properties we're using is:
    je.cleaner.threads=7
    je.maxMemoryPercent=40
    je.cleaner.deadlockRetry=7
    #je.cleaner.minFileUtilization=20
    je.cleaner.readSize=1048576
    je.cleaner.lookAheadCacheSize=262144
    #je.evictor.lruOnly=false
    #je.evictor.nodesPerScan=100
    je.log.faultReadSize=102400So the question is - is this is some bug in BDB JE, or we just missed things?

    Hi Eugene,
    We recently upgraded to newer version of BDB JE, and
    failed with random, but weird issue:Were any of the log files for this environment created with an earlier version of JE? If so, what version?
    Are you using DeferredWrite? There were bugs in earlier JE releases involving DeferredWrite and database removal/truncation and duplicates. I see from the information in your post that you are using database removal/truncation and duplicates.
    We checked our code and found we are not doing any removal
    of JE files at this stage (we had to implement
    removal of JE files BEFORE thread start to avoid
    cases when corrupted environment causes current task
    to not start, probably there's a better way? However
    this is definitely not a cause of the error, because
    removal is performed before environment is created)I'm not sure I understand. Before opening an environment, if you wish to clear out all data in the environment directory and start from scratch, then the right thing to do is delete all the log files. If that's what you're doing, that's fine.
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications

    Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications        
    One of our Managers encounters the error 'A problem occurred while accessing the Office document cache.  Do you want to repair this problem?'
    Then When he says yes it give a warning that the cache will be backed up and replaced
    Then it says 'A new office document Cache has been created...'
    Then it loads this cache with an error
    Then After all that the next time he tries to open the document it says  is encountered "Sorry, we couldn't open 'URL."
    We have Reinstalled office 2013 on the users PC repaired the cache numerous times
    Followed -  http://office.microsoft.com/en-gb/word-help/manually-rename-the-office-document-cache-HA101848838.aspx
    Updated Lync to 2013 leaving Access as the only office 2010 application (required for legacy systems access)
    Repair installed office 2010 and office 2013 again
    The SharePoint site has been added to the trusted sites list and the set up assistant run from office 365
    And the issue remains the Same all other users including some who also have Access 2010 for legacy systems access have no Issues OS is windows 7 32 Bit browser is IE 9
    Office 365 said
    Reply by Rachel Zhang MSFT Support
    Hi Alex,
    From your description, I notice that the issue is related to Office client. We would like to help you, but I’m sorry that our forum does not focus on this scenario and has limited resources regarding it. However, we have a dedicated support forum where
    the support engineers will help you with the issues about Office client:
    Microsoft Office Community:
    http://answers.microsoft.com/en-us/office/forum/office_2013_release?tm=1365567547805
    Feel free to sign in to the Office community and click Participate->Ask a Question to post the question with the relevant information.
    Microsoft Office Community:  
    Feel free to sign in to the Office community and click to post the question with the relevant information.
    Office team said
    Hello Alex,
    Thank you for posting your query in Microsoft Office Community.

    Check if other excel works fine
    Do you have any script\macro in excel file
    Check if all application pool on all servers are running
    both office and IE should be same build (64 or 32 bit)
    what is the error message in ULS log and Event viewer
    If this helped you resolve your issue, please mark it Answered

  • PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

    Hi,
    I'm trying to convert a book into PDF and I get the error message Couldn't open a file (... <filename>.fm) and the unavailable Fonts dialog box also appears. The tricky thing is I've converted the same book into PDF just a couple of days ago. Now when I tried to do it again, I get the above mentioned error message. I tried unselecting the File > Prefrences > General > Remember Missing Fonts checkbox too. However, it didn't help in generating the PDF. I will be thankful if anyone suggests a suitable workaround for this issue. Thanks in advance.

    Usually, deselecting Remember missing fonts works.
    The missing fonts message displays when you or FrameMaker opens the file. The workaround is to open all the files in the book, or at least those with the "missing" font, clearing the message for each file. Now print the book to PDF, while keeping the files open. This usually works because you have already cleared any missing fonts messages.

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • Several DAQmx Channels with Start and Clear Task VI's

    Hi,
    I'm trying to read in several DAQmx channels in a while loop. When I just place the channels within the while loop and connect them directly to the read VI's, everything is fine. But I read in the help, that this will slow down my system, because it's opening and closing the task each cycle. So I used Start Task and Clear Task VI's to open and clear them before and after the loop. But now it's only reading one of my channels in, although I wired all of them in exactly the same manner. Anyone has an idea, what I did wrong?
    Thanks,
    Miclas
    Attachments:
    Save&Stop DAQ.JPG ‏87 KB

    You would have seen the error if you had wired up and error indicator.
    You cannot run multiple tasks of the same type (i.e. an analog input) at the same time. What you read about stopping and closing tasks is correct but it was the only way your program could work. What you don't realize is that you can have multiple channels with a single task. If you used a physical channel constant, it would be something like 'dev1/ai0:2' if you had consecutive channels or 'dev1/ai0, dev1/ai2' for non-consecutive. Global channels are done in a similar fashion. You would have 'FSR1, FSR2, Knee Angle', etc.

  • Getting Error message couldn't open XPCOM and can't open ANY pages

    After load of updates were completed, I keep getting this Error 'COULDN'T OPEN XCOM' I can't open any programs or emails, Firefox won't open or IE. Have tried System Restore a number of times without any luck, even that doesn't complete successfully, starting to tear my hair out now.

    This is usually a problem with a failed update that caused a corrupted installation that still has older files.
    Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • File Sender Adapter with FTP protocol

    Hi,
    I implementet a file sender adapter with FTP protocol. There is a problem: the sender processes the files even if they're in use by another application.
    I.E. If another application put files (via ftp) in the sender work directory (that is on ftp), the sender processes those files before their transfer is completed.
    I don't want that this sender in a communication channel in PI 7.1, imports files in the system when they aren't completed yet.
    There are some ways to block sender before it processes incompleted files (in an ftp)?
    Thanks
    Matteo

    Hi,
    File sender adapter provides a check for NFS mode
    +Check this
    To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
    ●      Msecs to Wait Before Modification Check
    Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
    This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
    This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.+
    Other approach can be to apply OS level checks
    Regards
    Suraj

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

  • I couldn't open swf files

    Flash Player is installed but I couldn't open swf files

    Hi Susana,  I thought I couldn't open swf files too until I got one with sound.  I minimized my windows on top and found it playing on the bottom window.  This happens with both videos and Jpegs sent to me from a Mac;  I am using a PC with Windows Live Mail.  Therefore I think this problem is due to Shock Wave Format files (swf).
    I haven't found the solution to this yet, but I have isolated it. 
    Sam

Maybe you are looking for