Characteristic /CCM/PICTURE not found

SAP_BASIS 640 SAPKB64019
SRM_SERVER 500 SPAKIBKS10
CCM 200_640 SAPK-26406INCCM
I cannot upload /ccm/picture to supplier catalog through CSV 2.0.
I'm pretty sure I have the CSV file format correctly, when I do the upload, I get an error: Value for catalog item XXXX (supplier part no.) of supplier XX is incorrect. Detailed error says: Characteristic /CCM/PICTURE not found.
There is a SAP note: 878316 that addresses this issue, for SAPK-26402INCCM, but we're pass that release.
I'm currently using the work-around of a custom picture characteristic, but I'd much rather use the pre-defined one if i can.

Hi
MIME stands for MIME ( Multipurpose Internet Mail Extensions ) Types
Refer to this links
<b>http://help.sap.com/saphelp_erp2005vp/helpdata/en/19/14dfeed7b67a4d9b8406b0a56ebe37/frameset.htm
http://help.sap.com/saphelp_srm40/helpdata/en/42/1aae270f261608e10000000a114e5d/frameset.htm
http://help.sap.com/saphelp_srm40/helpdata/en/48/35d4fa4abf11d18a0f0000e816ae6e/frameset.htm
http://help.sap.com/saphelp_srm40/helpdata/en/fb/75d33980155556e10000000a11402f/frameset.htm
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D5D93BB73ADE10000000A114B54/content.htm</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Similar Messages

If Picture not found then show blank

SELECT '*'||a.Employee_code||'*' AS "BARCODE", a.Employee_code,
'D:\Pictures\'||a.employee_code||'.bmp' as pict,a.job_status,
a.Employee_name, a.Designation_desc,a.new_nic_no,
a.COMPANY_CODE, b.company_name,b.ADDRESS,
a.location_code, c.location_name,
a.department_code, d.department_name,
e.division_code, division_name
FROM Employees a,
company b,
locations c,
departments d,
divisions e
where a.company_code = b.company_code
and a.location_code = c.location_code
and a.department_code = d.department_code
and a.employee_code between :eno and :sno
and e.division_name = :div
and a.division_code = e.division_code
and a.department_head = 'N'
I used this query for print ID card it is working fine but one problem is here that if I dont have picture of any employee then report gives the error that "Picture not found" I want that if picture not found in d:\pictures then only show the blank space instead of message.

You are right Dmill
I used Formula column and write there these code
function CF_1Formula return Char is
l_filename text_io.file_type;
BEGIN
l_filename := text_io.fopen ('.\D:\Pictures\' || :pict, 'r');
text_io.fclose (l_filename);
RETURN :pict;
EXCEPTION
-- the report photo doesn't exist
WHEN OTHERS THEN
BEGIN
l_filename := text_io.fopen ('.\D:\Pictures\default_image.jpg', 'r');
text_io.fclose (l_filename);
RETURN 'default_image.jpg';
EXCEPTION
-- the report photo 'default_image.jpg' doesn't exist
WHEN OTHERS THEN RETURN NULL;
END;
END;
but here every picture is showing its default picture although I have some picture in said folder.

W25 The Characteristic %NV% is not found in data provider ...

Hi Gurus,
we are currently starting to use the BI Portal. I want to publish a Query, which really works fine in BEx Analyzer, in the Portal using a Web Template.
So I used the BEx Web Application Designer to create a Template where I just inserted the Analysis Item with my data provider.
In BEx Web Application Designer I get the warning "W25 The Characteristic %NV% is not found in data provider XXX" - and when I open my Query in the Portal I get the dump message
"ERROR RS_EXCEPTION (000): SQL0104N An unexpected token """" was found following "'1' AND "I"."SVER" =". Expected tokens may include: "<space>". SQLSTATE=42601
MSGV1: SQL0104N An unexpected token """" was found
MSGV2: following "'1' AND "I"."SVER" =". Expected tokens
MSGV3: may include: "<space>". SQLSTATE=42601
ABEND RSBOLAP (000): Programmfehler in Klasse SAPMSSY1 Methode : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION".
Does anybody have an idea what's the problem? Please?
Thank in advance!

Sandra,
If you are not on SPS-14 try applying this note
1122372.
Please assign points if helpful.
Thanks,
Bobby

Folder for pictures not found...

Hi!
The homepage for my company (actualy just a placeholder) has been run for a long time on a leopard server.
I now updated to OS X Server and the logo is not found, though I believe it is on the right place (/Library/WebServer/Documents/BLUM/)
I manualy put the /pictures folder in there, but cannot find the index.html.
Can anyone help me locate and fix this?

The HTML Code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Unbenanntes Dokument</title>
<style type="text/css">

</style></head>
<body>
<div align="center"><img src="pictures/blumlogo.png" width="320" height="480" alt="BLUM Informatik GmbH" longdesc="http://www.bluminformatik.ch/" /></div>
</body>
</html>
i tried changing to BLUMLogo.png to no avail...

Pictures not found-got new macbook

I got a new macbook and was using time machine to transfer everything over. I didn't transfer movies and pictures because I had enough pictures alone to fill up the entire new computer's harddrive (I am a photographer.) So now, in the finder, there is the picture and movies under places, but when I click on it, it just says the volume can't be found...this is a PROBLEM.
I edit my pictures in photoshop and there is now no way to get to my imported photos because there is no pictures folder anywhere....I know it's because I didn't import it from the old one, but there was no way I could because of space...What can I do?

Do you mean your only copies of those photos are on your TM drive?
If so, stop using TM immediately. Turn it off via TM Preferences.
TM will, eventually, delete it's copies of items that no longer exist on your internal HD. In fact, it may have done so already.
The backups for your old Mac won't be visible via +Enter Time Machine+ on your new Mac. To see them, you may need the (badly named) +Browse Other Time Machine Disks+ option. To use it, either hold down the Option key while selecting the TM icon in your Menubar, or control-click (right-click) the TM icon in your Dock. This option will take you into the TM interface in a way that you should see all backups on the disk you select.
You need to find somewhere else for the originals of your photos. Your best bet is probably another external drive. Restore your photos to it from TM, then figure out how to "point" Photoshop to them. This should be simple; there should be a setting in Photoshop, or you could probably make an alias on your internal HD.
TM will back-up that other drive along with your internal HD, unless you tell it not to.
And, if these are really important, you should consider also having some sort of off-site backup as well. External drives are great, but they may not protect you from fire, flood, theft, or direct lightning strike on your power lines. There are many ways to do this, such as a portable external drive, or even DVDs, but do something you can take to your safe deposit box, relative's house, workplace, etc.

IPhoto '11 source picture not found

trying to work on a picture which I used for a book. Although the picture is present in the album and has been again added from the harddisk I cannot work on the picture, comment is "source picture is not online". I tried repairing the database but to no effect. Any suggestions?

In the iPhoto preferences is the preference to copy imported items to the iPhoto library checked or have you unchecked it?
LN

If pic not found then show blank space

SELECT '*'||a.Employee_code||'*' AS "BARCODE", a.Employee_code,
'D:\Pictures\'||a.employee_code||'.bmp' as pict,a.job_status,
a.Employee_name, a.Designation_desc,a.new_nic_no,
a.COMPANY_CODE, b.company_name,b.ADDRESS,
a.location_code, c.location_name,
a.department_code, d.department_name,
e.division_code, division_name
FROM Employees a,
company b,
locations c,
departments d,
divisions e
where a.company_code = b.company_code
and a.location_code = c.location_code
and a.department_code = d.department_code
and a.employee_code between :eno and :sno
and e.division_name = :div
and a.division_code = e.division_code
and a.department_head = 'N'
I used this query for print ID card it is working fine but one problem is here that if I dont have picture of any employee then report gives the error that "Picture not found" I want that if picture not found in d:\pictures then only show the blank space instead of message.

Query is working fine see in query there is a field PIC that is representing to picture from D:\pictures folder
if I have 20 records in employee table from 1 to 20 and pictures exist in D:\pictures folder only 1 to 5 then report shows the error that D:\pictures\6.jpg is not found
I want that if I dont have picture in said folder then it does not return error only show the white rectangle.
I know that here i can use Pl/Sql but there is not any logic to define there.

When i choose a picture in Lightroom 5, a popup says file not found. What am i doing wrong?

When I choose a picture in Lightroom 5, and click on Develop, it was file not found. What am I doing wrong?

It means the photo has been moved, renamed or deleted outside of Lightroom (Hint: don't do that)
To fix the problem, either move the photo back to where it was (using your operating system), or re-connect in Lightroom following these instructions: Adobe Lightroom - Find moved or missing files and folders

Have had ELPH100HS for 2 years. I can't transfer pictures because "support devise not found." Also c

I've had ELPH100HS for 2 years. Up until now, everytime I transferred pictures to my computer, a camera icon would appear when I connected the camera via USB to the PCU. But, recently, the icon is missing, but I hear the bleep (connecting sound) I always have. However, I am unable to transfer pictures to the computer. The message that keeps popping up is "support device not found." I can't find my discs or my manufacturer's book that came with the camera. What should I do? Thanks. RAY

Here's the hosting that gives you a personal support person...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
As for your problem, try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Also check the files you are trying to upload - especially image files - for spaces or special characters in the file name.

Find Object.vi function of 3D picture control - when object not found

I am using Labview 8.2, and this post is regarding the 3D Picture Control.
I am wanting to make use of the "Find Object" VI to either return a reference to a named object, or otherwise determine that it does not exist yet. However, if I call it with the name of an object that doesn't exist yet (i.e. just any random string), it returns an error message that arises from the attempt to release a queue (the reference to which gets lost when crossing a zero-iteration For Loop's tunnels), instead of an error message that says "Object not found" which I would find much more useful. With a simple modification of the "Find Object.vi" function, this behaviour can be changed, by replacing the For Loop's tunnels with shift registers.
The problem with the current function is that the error is not an intentionally thrown error, rather just the result of the queue's refnum being set to the default 0 as it "exits" the For Loop, since in the situation that an object is not found, the code passes a 0 to the N terminal.
The attached images show the problematic code and the simple modification
Attachments:
Find Object.png ‏2 KB
Find Object_modified.png ‏2 KB

pauldavey,
I agree with you - the current way of handling the case of an object not being found does not appear to be ideal.
This was reported to R&D (# 43D8GSVQ) for further investigation.
Thanks for the feedback!
Regards,
Simon H
Applications Engineer
National Instruments

All pictures say file not found..

all my pictures say File Not Found. I cant edit any at all.. what do i do at this point?

Don't import again yet, it is usually the last thing to do as you will lose many settings and work you have done already.
Can you tell us your OS please and Lightroom version...
Also please upload a screen shot like this:

Export of pictures - original raw data not found

Hello everyone,
I have been trying to export a few pictures. But I always get the error, that the orginal folder could not be found. So Lightroom just creates an empty folder without exporting any of the pictures.
I have attached a sreenshot of the txt file with the error and the location of the not found folder, which is exactly the same as the stated location in the error code.
ANd I have already worked with Lightroom where I didn't have any problems exporting the files. So I am left without any clue..
I really appreciate any help
Best regards

Yes there were exclamation marks and I just had to click on them and give in the directory again.
Now it isworking perfectly fine.
Thanks a lot

Installation of CCM 6.1.2 on IBM MCS-7825-I4 V03 'drivers not found'

Hi all,
Wondering if anyone can help me resolving the issues that I'm experiencing while performing the installation of CCM BE 6.1.2 on the MCS server, receives an error that 'driver not found'.
the media iso image of ccm has no issues, thinking firmware is not compatible so have upgraded firmware twice to FWUCD-221-1 and FWUCD-3-6-5-1 while installing ccm still the same error.
Collected DSA and TAC has provided to IBM, they think no issues with hardware and CD/DVD drive may not be compatible, not convinced with their findings, so decided to post the case in this form, as I know real guru's are here :)
Much apprecited.

Hello, I ran into the same thing this evening but had no idea about this bug! I wish I was subscribed to the right email group!
But I went to that site you mention, got FWUCD-2.4.1-I.iso (550MB) from Cisco's software page, burned it and ran it on the server in bootup.
It updated the BIOS to 1.45 and also the Broadcom NIC cards.
Everything is up and dandy on our Unity Connexion 1.2, soon to be Version 7.x.

TS2830 When my computer truns on it says Apple Sync notifer.exe entry point not found. I can not stream my pictures through icloud are these related and what should I do to fix it?

When I turn on my computer an error message comes up that says Apple Sync Notifer.exe Entry point not found. The procedure entry point XMItextreadername could not be located in dynamic link library libxm12.dll
What should I do to fix this?

When I turn on my computer an error message comes up that says Apple Sync Notifer.exe Entry point not found. The procedure entry point XMItextreadername could not be located in dynamic link library libxm12.dll
With that one, I'd try uninstalling your MobileMe control panel.

Recorded Videos after Sync: The requested URL was not found on this server.

A few days ago, i recorded a couple of videos. They were saved properly and i could watch them after it in the Camera Roll of my iPhone. Because my memory was almost full, i connected my iPhone to my MacBook and synchronized about 900 old pictures with iPhoto and selected to delete the pictures after the sync. I did not select the recently recorded videos.
After the sync, i opened the Camera Roll on my iPhone and tried to watch the videos again. But now, they all have a grey icon and it says the duration is 0:00 minutes. When i click on a video, it shows me the following error message:
The requested URL was not found on this server.
When i connect my iPhone to iTunes, it says that there is about 350 MB of "Documents and Data" on my phone that I have no idea where it is coming from. Do you think it is possible that the videos are still saved on my phone but my phone doesn't recognize it as videos and can't assign it to the icons in the Camera Roll? Do you have any tips how I can access the videos in case they are still saved somewhere on my iPhone?
Thank you very much in advance for your help and tips!

I have the same problem too!! I was deleting some photos and videos in my phone when the next picture I swiped to was a blank picture with JPG in the middle~ after I closed camera roll and reopened it my photos and videos after that picture are all gone~ and I'm left with 3 videos I took about 30 mins before with 0:00 and when I tried to play them the message popped up saying "requested URL cannot be found on this server" T^T does anyone have a solution to this problem?

Characteristic /CCM/PICTURE not found

Similar Messages

Maybe you are looking for