Characteristic KNDNR is no longer in the field catalog and will be deleted
Hi ,
we are doing System Landscape optimisation project and the issue is as follows
In account based copa when i run the KE30 report , i am getting the message in the target system
'Characteristic KNDNR is no longer in the field catalog and will be deleted'
In the source system (production system), the customer characteristic is available as a variable in the characteristic list as an option and can be selected in the KE32 t code.
the customer is available in the KE30 report (source system) and it can be drilled down on the basis of the customer but it is not possible in the target system
in the Target system (to be production system) the customer characteristic is not available as a variable for selection in the KE32 report under the characteristic list.
i checked the ke3e t code in both the source and the target system and the characteristic KNDNR is not available as a variable
I checked the KEA5 and KEA0 t code in both the source and the target system , the customer characteristic is not available
thanks in advance
kind regards
sap student
Hi,
Are you trying to create a report from a Form? When are you getting this information? At the time of creating the form (KE34) or report (KE31)?
I have not seen this message though, can suggest to check if the required characteristic is there in KEA0, KEA5 and also if adding that in KEQ3 helps.
Regards,
R C Sabat
Similar Messages
-
How do I define Field-Catalog and Event-Catalog in OOPs ALV
Hi All,
This is the piece of the code on which I'm working upon. This program is giving an exception "No Field-Catalog Found".
I'm new to OOPs ALV. Could anybody please tell me how to define the field-catalog and event-catalog in this.
module PBO output.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container EXPORTING CONTAINER_NAME = 'CCCONTAINER'.
CREATE OBJECT g_grid EXPORTING I_PARENT = g_custom_container.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING I_STRUCTURE_NAME = 'IT_MATERIAL'
is_layout = layout
CHANGING IT_OUTTAB = gt_it_material.
ENDIF.
endmodule.
Regards,
Saurabhhi,
chk this sampl ceode.
TYPE-POOLS: slis.
CLASS lcl_event_receiver DEFINITION DEFERRED.
TABLES : zmpets_shipactiv, zmpets_chargebk, zmpets_shiphdr.
DATA : BEGIN OF int_crb OCCURS 0,
sel TYPE char1,
icon TYPE icon_d,
pernr LIKE zmpets_cil-pernr,
vorna LIKE pa0002-vorna,
movreason LIKE zmpets_shiphdr-movreason,
shipdocnum LIKE zmpets_chargebk-shipdocnum,
createdon LIKE zmpets_chargebk-createdon,
chargeamount LIKE zmpets_chargebk-chargeamount,
version LIKE zmpets_shipactiv-version,
activity LIKE zmpets_shipactiv-activity,
vendor LIKE zmpets_shiphdr-vendor,
smtp_addr LIKE adr6-smtp_addr,
empperid LIKE zmpets_167doc-empperid,
celltab TYPE lvc_t_styl,
END OF int_crb.
DATA : int_crb_ver LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_crb_mail LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_shipactiv LIKE zmpets_shipactiv OCCURS 0 WITH HEADER LINE.
DATA: gt_fieldcatalog TYPE lvc_t_fcat.
DATA : wf_flag TYPE i.
DATA : wf_res TYPE c.
DATA : wf_tabix TYPE sy-tabix.
DATA: BEGIN OF int_sin OCCURS 0,
shipdocnum LIKE zmpets_chargebk-shipdocnum,
shipdocnum LIKE zmpets_shipactiv-petsdocnumber,
END OF int_sin.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA l_num(3).
DATA: ok_code LIKE sy-ucomm,
w_repid LIKE sy-repid,
wl_sno TYPE i VALUE 0,
w_max TYPE i VALUE 100,
wf_layout TYPE lvc_s_layo,
cont_on_main TYPE scrfname VALUE 'GRID_CONTROL',
cont_on_dialog TYPE scrfname VALUE 'GRID_CONTROL',
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
custom_container1 TYPE REF TO cl_gui_custom_container,
custom_container2 TYPE REF TO cl_gui_custom_container,
event_receiver TYPE REF TO lcl_event_receiver,
lt_exclude TYPE ui_functions,
ls_celltab TYPE lvc_s_styl,
lt_celltab TYPE lvc_t_styl.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-001.
PARAMETERS : p_cash AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b3.
PERFORM fieldcatalog_init USING gt_fieldcatalog[].
Selection-Screen----
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
SELECT-OPTIONS:s_chdate FOR zmpets_chargebk-createdon,
s_pernr FOR zmpets_shiphdr-pernr,
s_mvrsn FOR zmpets_shiphdr-movreason,
s_sin FOR zmpets_chargebk-shipdocnum NO INTERVALS
NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM f_clear_fields.
CALL SCREEN 100.
CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
§ 2.In event handler method for event TOOLBAR: Append own functions
by using event parameter E_OBJECT.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
new button -
MOVE 'PROCESSED' TO ls_toolbar-function.
MOVE icon_execute_object TO ls_toolbar-icon.
MOVE 'Process the Record'(110) TO ls_toolbar-quickinfo.
MOVE ' Process '(200) TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
§ 3.In event handler method for event USER_COMMAND: Query your
function codes defined in step 2 and react accordingly.
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'PROCESSED'.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
defaultoption = 'N'
textline1 = 'Do you want to process the selected documents?'
TEXTLINE2 = ' '
titel = 'Process Documents'
START_COLUMN = 25
START_ROW = 6
CANCEL_DISPLAY = 'X'
IMPORTING
answer = wf_res.
*--IF THE USER CONFIRMS 'YES',
IF wf_res = 'J'.
PERFORM f_modify_activity.
CALL METHOD grid1->refresh_table_display.
PERFORM SENDINGMAIL.
ENDIF.
ENDCASE.
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
MODULE pbo_100 OUTPUT
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
w_repid = sy-repid.
IF custom_container1 IS INITIAL.
*get the data from charge back table
PERFORM select_table_chb.
create a custom container control for our ALV Control
CREATE OBJECT custom_container1
EXPORTING
container_name = cont_on_main
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = w_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT grid1
EXPORTING i_parent = custom_container1.
Set a titlebar for the grid control
wf_layout-grid_title = 'Charge Back'(100).
allow to select multiple lines
wf_layout-sel_mode = 'C'.
wf_layout-stylefname = 'CELLTAB'.
Exclude all edit functions in this example since we do not need them:
PERFORM exclude_tb_functions CHANGING lt_exclude.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = wf_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = lt_exclude
IT_HYPERLINK =
IT_ALV_GRAPHICS =
CHANGING
it_outtab = int_crb[]
it_fieldcatalog = gt_fieldcatalog.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF. "IF grid1 IS INITIAL
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. "pbo_100 OUTPUT
MODULE pai_100 INPUT
MODULE pai_100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
PERFORM f_clear_fields.
LEAVE PROGRAM.
WHEN 'CANCEL'.
PERFORM f_clear_fields.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
PERFORM f_clear_fields.
LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE. "pai_100 INPUT
**& Form select_table_chb
text
FORM select_table_chb.
IF p_cash = 'X'.
*Consider the pending documents also.
*get the documents which are not processed yet,
*Doctype -> 06 = Charge Back document type.
SELECT zmpets_shiphdrpernr pa0002vorna
zmpets_shiphdrmovreason zmpets_chargebkshipdocnum
zmpets_chargebkcreatedon zmpets_chargebkchargeamount
zmpets_shipactivversion zmpets_shipactivactivity
zmpets_shiphdr~vendor
adr6~smtp_addr
zmpets_167doc~empperid
INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
FROM zmpets_chargebk
JOIN zmpets_shiphdr
ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
JOIN zmpets_shipactiv
ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
JOIN pa0002
ON zmpets_shiphdrpernr = pa0002pernr
JOIN lfa1
ON lfa1lifnr = zmpets_shiphdrvendor
JOIN adr6
ON adr6addrnumber = lfa1adrnr
JOIN zmpets_167doc
ON zmpets_167docpernr = pa0002pernr
WHERE zmpets_shipactiv~doctype = '06'
zmpets_shipactiv~activity NE '30'
ZMPETS_CHARGEBK~CREATEDON IN s_chdate
AND ZMPETS_SHIPHDR~pernr IN s_pernr
AND ZMPETS_SHIPHDR~MOVREASON IN s_mvrsn
AND ZMPETS_CHARGEBK~SHIPDOCNUM IN s_sin
AND zmpets_chargebk~loekz NE 'X'
AND zmpets_shipactiv~loekz NE 'X'
AND zmpets_shiphdr~loekz NE 'X'.
IF sy-subrc <> 0.
*Message is 'No Pending Documents Available.'.
MESSAGE s196(zm050).
ELSE.
LOOP AT int_crb_ver.
*Not yet processed. set to red
int_crb_ver-icon = '@0A@'.
MODIFY int_crb_ver.
ENDLOOP.
PERFORM f_filter_data_pending.
ENDIF.
ELSE.
*Get the document details from pa0002,zmpets_shipactiv,ZMPETS_CHARGEBK
*table.
*Consider document type as '01' during the selection.
*Doctype -> 06 = Charge Back document type.
SELECT zmpets_shiphdrpernr pa0002vorna zmpets_shiphdr~movreason
zmpets_chargebkshipdocnum zmpets_chargebkcreatedon
zmpets_chargebkchargeamount zmpets_shipactivversion
zmpets_shipactivactivity zmpets_shiphdrvendor
*adr6~smtp_addr
zmpets_167doc~empperid
INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
FROM zmpets_chargebk
JOIN zmpets_shiphdr
ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
JOIN zmpets_shipactiv
ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
JOIN pa0002
ON zmpets_shiphdrpernr = pa0002pernr
JOIN lfa1
ON lfa1lifnr = zmpets_shiphdrvendor
JOIN adr6
ON adr6addrnumber = lfa1adrnr
JOIN zmpets_167doc
ON zmpets_167docpernr = pa0002pernr
WHERE zmpets_chargebk~createdon IN s_chdate
AND zmpets_shiphdr~pernr IN s_pernr
AND zmpets_shiphdr~movreason IN s_mvrsn
AND zmpets_chargebk~shipdocnum IN s_sin
AND zmpets_shipactiv~activity NE '30'
AND zmpets_shipactiv~doctype = '06'
AND zmpets_chargebk~loekz NE 'X'
AND zmpets_shipactiv~loekz NE 'X'
AND zmpets_shiphdr~loekz NE 'X'.
IF sy-subrc <> 0.
*Message is 'No Charge Back Documents Available.'.
MESSAGE s201(zm050).
ELSE.
PERFORM f_filter_data.
ENDIF.
ENDIF.
ENDFORM. "select_table_chb
*& Form UPDATE_RECORDS
text
--> p1 text
<-- p2 text
FORM update_records TABLES p_et_index_rows
STRUCTURE lvc_s_row.
DATA: ls_selected_line LIKE lvc_s_row,
lf_row_index TYPE lvc_index.
LOOP AT p_et_index_rows INTO ls_selected_line.
lf_row_index = ls_selected_line-index.
ENDLOOP.
ENDFORM. " UPDATE_RECORDS
**& Form fieldcatalog_init
text
-->P_GT_FIELDCATALOG[] text
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat.
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SEL'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'C'.
ls_fieldcatalog-col_pos = 1.
ls_fieldcatalog-edit = 'X'.
ls_fieldcatalog-reptext = 'Select for Processing'.
ls_fieldcatalog-coltext = 'Select for Processing'.
ls_fieldcatalog-seltext = 'Select for Processing'.
ls_fieldcatalog-tooltip = 'Select for Processing'.
ls_fieldcatalog-checkbox = 'X'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ICON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'CHAR'.
ls_fieldcatalog-col_pos = 2.
ls_fieldcatalog-intlen = '4'.
ls_fieldcatalog-reptext = 'Status'.
ls_fieldcatalog-coltext = 'Status'.
ls_fieldcatalog-seltext = 'Status'.
ls_fieldcatalog-tooltip = 'Status'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'PERNR'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-col_pos = 2.
ls_fieldcatalog-intlen = '8'.
ls_fieldcatalog-reptext = 'Employee Number'.
ls_fieldcatalog-coltext = 'Employee Number'.
ls_fieldcatalog-seltext = 'Employee Number'.
ls_fieldcatalog-tooltip = 'Employee Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'VORNA'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 3 .
ls_fieldcatalog-datatype = 'CHAR'.
ls_fieldcatalog-outputlen = '20'.
ls_fieldcatalog-reptext = 'Employee Name'.
ls_fieldcatalog-coltext = 'Employee Name'.
ls_fieldcatalog-seltext = 'Employee Name'.
ls_fieldcatalog-tooltip = 'Employee Name'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MOVREASON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 4.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-reptext = 'Move Reason'.
ls_fieldcatalog-coltext = 'Move Reason'.
ls_fieldcatalog-seltext = 'Move Reason'.
ls_fieldcatalog-tooltip = 'Move Reason'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SHIPDOCNUM'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-col_pos = 5.
ls_fieldcatalog-reptext = 'Shipping Document Number'.
ls_fieldcatalog-coltext = 'Shipping Document Number'.
ls_fieldcatalog-seltext = 'Shipping Document Number'.
ls_fieldcatalog-tooltip = 'Shipping Document Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CREATEDON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 6.
ls_fieldcatalog-datatype = 'DATS'.
ls_fieldcatalog-outputlen = '8'.
ls_fieldcatalog-reptext = 'Created On'.
ls_fieldcatalog-coltext = 'Created On'.
ls_fieldcatalog-seltext = 'Created On'.
ls_fieldcatalog-tooltip = 'Created On'.
ls_fieldcatalog-DO_sum = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CHARGEAMOUNT'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 7.
ls_fieldcatalog-datatype = 'CURR'.
ls_fieldcatalog-outputlen = '13'.
ls_fieldcatalog-reptext = 'Charge Back Amount'.
ls_fieldcatalog-coltext = 'Charge Back Amount'.
ls_fieldcatalog-seltext = 'Charge Back Amount'.
ls_fieldcatalog-tooltip = 'Charge Back Amount'.
ls_fieldcatalog-DO_sum = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form f_modify_activity
Modify the activity to 79 in zmpets_shipaciv table.
--> p1 text
<-- p2 text
FORM f_modify_activity .
REFRESH int_crb_mail.
int_crb_mail[] = int_crb[].
*All the document number which is to be processed is stored in
*the internel table 'INT_SIN'.
LOOP AT int_crb INTO int_crb.
IF int_crb-sel ='X'.
MOVE int_crb-shipdocnum TO int_sin.
APPEND int_sin.
CLEAR int_sin.
*Removing the processed documents.
DELETE int_crb.
ENDIF.
CLEAR int_crb.
ENDLOOP.
*Get the details from shipactiv table.
IF int_sin[] IS NOT INITIAL.
SELECT * FROM zmpets_shipactiv
INTO TABLE int_shipactiv
FOR ALL ENTRIES IN int_sin
WHERE petsdocnumber = int_sin-shipdocnum.
*Modify the activity code, version, actual date and last changed date.
SORT int_shipactiv BY petsdocnumber version DESCENDING.
CLEAR wf_tabix.
LOOP AT int_shipactiv.
wf_tabix = sy-tabix.
AT NEW petsdocnumber.
READ TABLE int_shipactiv INDEX wf_tabix.
int_shipactiv-activity = '030'.
int_shipactiv-version = int_shipactiv-version + 1.
int_shipactiv-actdate = sy-datum.
int_shipactiv-lastchangedby = sy-uname.
int_shipactiv-lastchangedt = sy-datum.
*Modify the data base table
MODIFY zmpets_shipactiv FROM int_shipactiv.
ENDAT.
CLEAR int_shipactiv.
AT LAST.
*Message is 'Data Processed Successfully.'.
MESSAGE s203(zm050).
ENDAT.
ENDLOOP.
*-send mail to the vendor and employee that the shipment is cleared for
LOOP AT int_crb_mail WHERE sel = 'X'.
PERFORM f_send_mail.
ENDLOOP.
REFRESH int_crb_mail.
CALL SELECTION-SCREEN 1000.
ELSE.
*Message is 'No Data Selected for Processing.'.
MESSAGE s200(zm050).
ENDIF.
ENDFORM. " f_modify_activity
*& Form f_clear_fields
text
--> p1 text
<-- p2 text
FORM f_clear_fields .
CLEAR int_crb.
CLEAR int_crb_ver.
CLEAR int_sin.
REFRESH int_crb.
REFRESH int_crb_ver.
REFRESH int_sin.
CLEAR int_shipactiv.
REFRESH int_shipactiv.
CLEAR wf_flag.
CLEAR wf_tabix.
ENDFORM. " f_clear_fields
*& Form f_filter_data
text
--> p1 text
<-- p2 text
FORM f_filter_data .
*Take the latest Version Data.
*take all the activities, including the activity '30'.
then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
wf_tabix = sy-tabix.
AT NEW shipdocnum.
READ TABLE int_crb_ver INDEX wf_tabix.
MOVE-CORRESPONDING int_crb_ver TO int_crb.
APPEND int_crb.
CLEAR int_crb.
ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
MESSAGE s202(zm050).
ELSE.
CLEAR wf_tabix.
LOOP AT int_crb.
wf_tabix = sy-tabix.
REFRESH lt_celltab.
ls_celltab-fieldname = 'SEL'.
IF int_crb-activity = '030'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
*status becomes green. ie processed
int_crb-icon = '@08@'. "Green
ELSE.
ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
*status set to red. ie not yet processed
int_crb-icon = '@0A@'. "Red
ENDIF.
INSERT ls_celltab INTO TABLE lt_celltab.
INSERT LINES OF lt_celltab INTO TABLE int_crb-celltab.
MODIFY int_crb INDEX wf_tabix.
ENDLOOP.
ENDIF.
ENDFORM. " f_filter_data
*& Form f_filter_data
text
--> p1 text
<-- p2 text
FORM f_filter_data_pending.
*Take the latest Version Data.
*take all the activities, including the activity '30'.
*then filter it with out the activities '30' and having the lastest
*version. then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
wf_tabix = sy-tabix.
AT NEW shipdocnum.
READ TABLE int_crb_ver INDEX wf_tabix.
IF int_crb_ver-activity NE '030'.
MOVE-CORRESPONDING int_crb_ver TO int_crb.
APPEND int_crb.
CLEAR int_crb.
ENDIF.
ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
MESSAGE s202(zm050).
ENDIF.
ENDFORM. " f_filter_data_pending
*& Form EXCLUDE_TB_FUNCTIONS
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = 'anversha.shahul@'."int_crb_mail-smtp_addr
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
rgds
anver
pls mark hlpful answers -
Field not present in the Field Catalog also getting displayed in the ALV
Hi Experts,
I am trying to display some to an ALV grid. But since i don't need all the fields from the internal table, i have deleted those fields from the field catalog. But in-spite of doing this the field heading is still getting displayed. I am not able to figure out the reason for this. Also note that the i have not deleted that field from my internal table which contains the actual data.
Regards,
KushHi,
If your giving your internal table to the below field then ALV try to disply those many coloumn.
wa_fcat-tabname = 'IT_OUTPUT'.
You can add for that field name.
wa_fcat--NO_OUT = 'X'.
Please check the field name on the output will be same as before column name . -
How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?
You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html -
ALV report using the field catalog
which is the quickest way to generate an ALV report using the field catalog merge. without needing to build the field catalog manually .
is it easier to create a structure and passe it in the field catalog merge . if yes can i have an example plzzzzhI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
Data declaration
Data retrieval
Build fieldcatalog
Build layout setup
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL -
My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?
I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee -
Recently Got a Mac Book and was wondering if there is any software that Apple recommends to import my music/pics/video from my Iphone onto my computer. I no longer have the previous computer and if I sync my Iphone I'll lose everything.
This is the iTunes for Windows forum...
You should be able to:
Backup the device to the new windows installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup! (Windows tip). For a Mac use Time Machine or Carbon Copy Cloner.
tt2 -
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
-
after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod. It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Otherwise you are out of luck. Apple is not making any more update for the 4G.
Also check with Phillips. Maybe they have an firmware update available -
Table AGR_1251: Search between a range of the field "LOW" and "HIGH
Hello Experts,
i've got a problem by searching all users who have the authority for a transaction.
The transaction was written in a parameter, called p_trans.
I've the Tables AGR_1251, AGR_AGRS and AGR_USERS.
I know what I've to do.
Here is my Join.
SELECT agru~uname
INTO CORRESPONDING FIELDS OF TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
ON agrs~agr_name = agru~agr_name
INNER JOIN usr01 as us
ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
ag12~field = 'TCD' AND
???? parameter p_trans between ag~low and ag~high????
SELECT agru~uname
APPENDING TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
ON agrs~child_agr = agru~agr_name
INNER JOIN usr01 as us
ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
ag12~field = 'TCD' AND
???? parameter p_trans between ag~low and ag~high????
SORT gt_users BY uname ASCENDING.
DELETE ADJACENT DUPLICATES FROM gt_users COMPARING uname.
Here is my question:
In my code are question marks...here i want to say, that my transaction lays between the fields LOW and HIGH.
But how can i say, that in WHERE.
I have to say... Search that agr_name, where object = s_tcode, field=tcd and where my transaction lies between.
For example: low is T and high is X and i have the transaction va21.
So i must find out, in which range lays ma transaction.
I hope somebody understands me
Thanks!
Regards,
MarcelHi Marcel,
You are mentioning it as a parameter between having low & high values. Is it a parameter or select option.
If its a parameter, then anyway it will have only single value at any point of time.
If its a select option, then you need to use
select * from
and tcode in s_tcode.
Thanks,
Best regards,
Prashant -
Function Module that will retrieve the Field Catalogs of a Display Variant
Hello Experts,
Are there any function modules that I can use to retrieve the field catalogs (fields to be displayed in ALV report) by passing the display variant name?
An RFC needs to apply this to determine which field(data) to be passed to XI (calling system) depending on user login.
Thanks in advance!These are the various FM available for Variants (field Layout)
REUSE_ALV_VARIANT_ALL_MAINTAIN Maintain all display variants for one object
REUSE_ALV_VARIANT_DEFAULT_GET Read default display variant (description only, w/o field catalog)
REUSE_ALV_VARIANT_EXISTENCE Checks whether a display variant exists
REUSE_ALV_VARIANT_F4 Display variant selection dialog box
REUSE_ALV_VARIANT_MAINTAIN Definition of a display variant outside the list context
REUSE_ALV_VARIANT_SAVE Save a display variant
REUSE_ALV_VARIANT_SELECT Read a display variant
Regards,
Amit -
KOMK Field is not showing up in the field catalog for creating cond. tab
Hi Guys,
I add a new field in KOMK table.
Its showing up in the Field catalog but when I create a condition table, its not showing up in that catalog to choose.
Thank U for Ur time.
Cheers
S KumarHi,
Perhaps you have checked it. Do you check if in SM30 for view VV_T681F_VA you have this field?
Regards,
Eduardo -
Difference between the Field Group and Internal Table.
Hi all,
Can anybody tell me the difference between the Field group and Internal table and when they will used?
Thanks,
Sriram.Hi
Internal Tables: They are used to store record type data in tabular form temporarily in ABAP programming. Or we can say, it stores multiple lines of records for temporary use in ABAP programming.
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Regards
Ashish -
Newly-added field missing in the field catalog for NR00
I am about to creat condition record for condition type NR00 free goods . I need to make some customizing to meet our requirement .So I changed the field catalog for the condition table by adding a new field BWAST (purchasing document type) . After that I am going to creat a new condition table 501 with this newly-added field ,but I can't find the field in the right part for field catalog .
Can you give me some advice ? Thank you in advance.I 've got the answers ,
Note 21040 - Allowed Fields not appearing for condition table
thaks -
Need to set default values for the fields plant and location in ME21N
Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advancehi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam
Maybe you are looking for
-
How to connect my MBP at my TV ?
Hi, I would like to connect my MBP at my TV via HDMI, peritel would be best , how do I do that ?
-
ICloud & back to my mac - is this a screen share issue?
Since installing Lion a few weeks ago on my Macmini (to help me fully upgrade / migrate from MobileMe to iCloud) I've have a couple of issues which are bugging (no pun intended) the life out of me. I'm almost at the point of doing a complete erase a
-
Spry Menubar in table -problem in IE
I'm a newbie to web design and this software...having said that here is my issue: I inserted a horizontal Spry menu bar in a cell of a table. When viewed in Firefox, all is well. When viewed in IE, the Spry menubar is no longer in the cell but droppe
-
Why am I getting a warning that an unknown computer is trying to access thru firefox? This is very disturbing. I have been a trusted user since you came out. This is concerning!
-
Can you edit/change an image to show depth in pages and or keynote?
does anyone know how to make an image have depth ? for a better explanation of what i mean.... look at the image here (safe link) http://www.xtorrentp2p.com/ on the right side of the screen the image of the application is rotated to show depth, anyon