ChaRM and satellite refresh
Hello Gurus,
We have implemented and use ChaRM for our landscape : DEV->QAS->INT->PROD since 10 days.
We are making 1 time/month a copy refresh from our PROD to the INT system.
I wonder what's going on ChaRM for all the current transport requests before the refresh on the INT system !
HI Mikee ,
We had raised this question with SAP support and got to know that link between all the transports in quality (satellite target system which is getting refreshed) & Solution Manager ChaRM gets lost. Even if you load all those transports after refresh, this link does not gets stabilished.
This is known problem at least till support pack 15.
Please let us know your observation as we have not tried this yet. Thnx
Best regards,
Vithal
Similar Messages
-
Satellite A100-153: What are verical and horizontal refresh rates for my display
How can I found out what are verical and horizontal refresh rates for my display?
Hi
Do you mean the vertical and horizontal display resolution???
Anyway all informations should be listed in the user manual.
I dont know exactly what appendix is it but it must be placed somewhere at the end of the user manual.
Such infos are listed also in my user manual which was delivered and preinstalled on my Satellite notebook. -
We have implement CHARM on our ECC landscape. And now the test system is going to be refreshed from production 1 month older.
From CHARM perspective - how do we accomplish this task ?
What the list of things that we need to do before and after refresh ?
Also, how will the transports be synced up?
What are the implication of a refresh or restore activity on CHARM ?Hi,
I will do what was instructed by you.After doing so, what are the steps to check whether all the 3 system(dev,qty,prod) are having build with same objects.
Thanks,
Suresh. -
ChaRm and CTS+ configuration
Hello Experts,
Can anyone forward ChaRm and CTS+ configuration document to me, I have received Business requirments and trying to configure the same. I would appreciate step by step configuration guide for both.
Thanks in advance.
Regards,
Swapnil Lakhe
lakhess<at>gmailHi,
Please find the below steps for Charm confirguration :
1.SAP Solution Manager Implementation Guide SAP Solution Manager Basic Settings SAP Solution Manager System Activate Integration with Change Request Management
Click on the Execute icon with the text Activate Integration with Change Request Management
Double click the Activate Change Request Management and set up client
It will show the following window type your Change Request Management Client Number
Click on the Integration Solution Manager
If you have different system for Change Request Management gives the RFC destination for that System.
Click back button
Double click on the Integration Change Request Management
You have to maintain the following data here
Column 1: Application: CHARM
Column 2: + : W
Column 3: RFC Destination: NONE
Column 4: + : CUST620
Column 5: + : 1.0
2.SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Standard Configuration
General activities
Click on the Execute button with the text u201CActivate BC Sets u201C
It will take us to SCPR20 Transaction which is used to Activate the BC sets
Select the BC set SOLMAN40_CHARM_BASICFUNC_001 , it is for solution manager version 4.0
Click on the Activate Button
Create a Request for Activating the BC Set
Click Save button to assign with a TP .Other wise Create a new Transport Request (TP).
In Overwrite Data Box, select the Overwrite data, and in Activation Mode box select Expert Mode Option , Click on OK Button to activate this BC set.
3.SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Standard Configuration
Transport Management System.
In Order to do all the Settings under the Transport Management System do follow the steps.
All the below settings has to be done in satellite system not solution manager
1. Define Transport Routes for System Landscape
Go to Transaction STMS
Choose Overview -> Systems.
Double-click each system.
The Display TMS Configuration: System <system ID> screen appears.
Select the Transport Tool tab page.
If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
Save your entries.
Configure Transport Strategy
Go to Stms Transaction
Go to Menu Overview Transport Route
Doubt click on Each System . In the Transport strategy group box, select Single transports
(since only Import Single and Import Project All are used).
In the Quality assurance group box, deselect Delivery after confirmation
1. Choose Continue.
Activate TMS Trusted Services
Choose Overview -> Systems.
Choose Goto -> Transport domain.
In Management Tab
In Security Options group box
Click on Trusted Services Active
Go to QA Approval Procedure
You should not assign any QA approval system there
Save your Entries
Call Transaction STMS.
Choose Overview Systems. The system overview appears.
Choose SAP System Create Domain link.
The dialog box Request for Linking 2 Domains appears.
Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
Your SAP System performs the following actions automatically:
o Generates the required RFC destinations.
o Sends the address data of the controller to the controller in the other domain.
You can now see that you have requested the domain link to the other domain in the system overview.
Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
After that Go to SAP System Check Connection Test, transport directory and transport tool
Check all once whether it is having inconsistency.
4.Check Configuration of Transport Domain
Log on to every domain controller that is connected to your transport landscape.
Call transaction STMS
Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
Generate RFC Destinations to Client 000
Call Transaction SMSY.
Go To Landscape Components
Go to your Satellite System
Click on the Domain Controller System
In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
Give the User name for Read Access and Change Manager
Click the OK Button to Continue
Add Import Authorization to Operator/Administrator
Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager system.
Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
5.Set Project Assignment of Requests as Mandatory
If you want to enable your change request project is mandatory while creating a request for workbench or customization object, follow the steps
Go to Transaction
/N/TMWFLOW/CMSCONF
Select the Change Request Management System
Double click on the Project Assignment column
A new windows opened as follows
In the Attribute Required for Requests Box , Select Mandatory on the Default for all clients List
In the Client u2013Specific Setting Activate the tick mark of the Right side of the Table Control
6.Change Transport Request Option
Requirements
u2022 Repository changes are permitted in the system where you want to change the transport request option. (If they are not, proceed as described in SAP Note 327351.)
u2022 You do NOT use template projects.
Go to Transaction SE38
Enter the following Program SAPLSCMA
Click on the Display Button
Click the Find icon and type the following keyword,
G_ACTIVATE_CORRECTION_SYSTEM
Click on the OK Button to search
Using Modification, Edit the Program in Change Mode
Delete the following lines ,
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
And Insert the following lines ,
no_automatic_recording = 'X'.
Call Transaction SCC4
Select the Change Request Management Client and Click the Display ICON.
Go to Transaction SE 11
Enter the table SCMATREED
Choose Display
In Menu Click on Goto -> Indexes,
Choose Yes in the dialog box, and enter the index name 001, and the following short description: Index for Node in SCMATREE.
Maintain Number Ranges
Go to Transaction SNRO
Enter Object Name /tmwflow/M
Click on Number Range Button on the Application Toolbar
Click on the Change Intervals Button
For the new interval, enter 01, and use the F4 Help function to select a value for the From Number field.
The system returns 000000001 to 999999999.
Save the Entries
Come to the SNRO First Screen again; follow the same procedure for the following objects
/tmwflow/d and /tmwflow/v.
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Extended Configuration Schedule Manager
( Note in HLL We have using the Standard SAP Variants )
Create Customer-Specific Variant for Task Lists
Click on the Execute button
To Create a New Entries, Click on the Create New Entries Button
Type the Variant Name in the Variant Column Starts with the name space of u2018Zu2019, and in the Description Column you can maintain the description
Define Additional Tasks for Task Lists
Create Customer-Specific Header and Footer Tasks
Install Template Report
For all the above Refer IMG Node, follow the Steps
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Change Transaction
Check Installation Activities
Make sure that you have performed the iBase IMG acitivities before you proceed with the Change Transaction IMG activities: SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> Service Desk -> iBase.
Check the all the following settings has been done .
Initially Create and Assign the Component Systems as iBase Components
Manually Create and Assign the Component Systems as iBase Components
Assign Business Partners to iBase Components
In the following Link all the Settings comes with BC Set.
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Change Transaction
USER Authorization
Administrator
SAP_CM_SMAN_ADMINISTRATOR
Change Manager
SAP_CM_SMAN_CHANGE_MANAGER
IT Operator
SAP_CM_SMAN_OPERATOR
Developer
SAP_SOCM_DEVELOPER
Regards
Sreedhar Reddy.A -
Qosmio G30-126: how to connect analog TV and satellite TV simultaneously
Hi, I have a Qosmio G30-126 and have a problem with simultaneous receiving analog TV (by TV-in port in built-in TV tuner) and satellite channels from satellite set-top-box (by AV-in ports).
I can programm Windows Media Center for analog TV (but without satellite STB) by antenna TV-in port and it works perfectly.
I can programm Windows Media Center for digital channels from satellite STB (but without analog TV) by AV-in ports and it works perfectly.
But i can't program Windows Media Center for both analog TV i satellite STB, because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
For me it is a big problem, because I have cable TV (analog) and satellite STB with digital channels. And I want to watch on my Qosmio all channels.
Could anyone help me?>... because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
I think in this statement you answered your question. I had Qosmio G30 long time ago and i also know that WMC cannot handle with two signal sources at the same time.
To confirm this contact Microsoft and ask them. I mean they have designed WMC and know how it works exactly.
Toshiba has just offered proper hardware (TV tuner) to offer TV option on this notebook. -
Animated gif and page refresh problem
Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
//setTimeout("refresh()", 1000);
setTimeout("location='status.jsf'", 1000);
<% }else{%>
window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
<script LANGUAGE="JavaScript">
refresh();
</script>
</head>
<body>
<img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
//setTimeout("refresh()", 1000);
setTimeout("location='status.jsf'", 1000);
<% }else{%>
window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
<script LANGUAGE="JavaScript">
refresh();
</script>
</head>
<body>
<img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html> -
Error in INTEGRATION_DIRECTORY_HMI and CACHE REFRESH
Hi guys, well after checking the forum and several blogs i can't get rid of my problem!
I have a problem concerning INTEGRATION_DIRECTORY_HMI and CACHE REFRESH.
i wanted to get a file from a FTP-Server via CC and i got error:
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Because of this i tried to update my cache (SXI_CACHE). When i do a Delta Cache Refresh i get:
Prefix Number: entry missing for system SSID client 100.
When i do a complete Cache Refresh nothing happens at all. I also checked the cache notification in IB - Integration Directory where i fin dout that only the Integration Server (ABAP Cache) won't refresh. Well status is started but nothing else is happening.
Then i checked the RFC INTEGRATION_DIRECTORY_HMI, did a connection test where i get an Internal Server error.
Let me tell u that the systems runs very well in the last days but now i have no clue what might be wrong.
Can somebody please advice me? I already read all blogs concerning this and also did a complete system-restart....
br Jenswhen you check INTEGRATION_DIRECTORY_HMI with SM59 it is normal to get
HTTP Response 500 - Internal Server Error. In this case it meens everything OK
see the rediness check, that is attached to SAP note 817920
when you start the complete cache refresh, you can see
the function module SAI_CACHE3_REFRESH_BACKGROUND in SM58. As long as you can see this entry, the cache
refresh is ongoing. If the refresh takes too long and runs on an error, try to specify another timeout in INTEGRATION_DIRECTORY_HMI or in the ICM
Best Regards
Alexander
Message was edited by:
Alexander Wrobel
Message was edited by:
Alexander Wrobel
Message was edited by:
Alexander Wrobel -
Problems in SLD and Cache refresh (SXI_CACHE).
Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current clientHello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz -
ChaRM and CTS+ for EP 7.0 in SolMan
Hi,
I've been trying to get CHaRM working for EP 7.0 in our SolMan systems for a while, but have not been able to get it working. I've read through and followed all the documentation on the resources page here, the Solution Manager documentation on help.sap.com and service.sap.com and all the notes I can find. We are running SolMan 7.0 SPS 17, and the Portal is on NW7.0 SPS 15.
I have configured SMSY, populated from SLD and assigned to a system (I've tried NETWEAVER 7.0 - Enterprise Portal main instance, and ERP 6.0 - SAP XSS main instance) and assigned the dev and prod systems to a locical component.
I have configured STMS, a single client independant consolidation route from dev to prod. The dev system is defined as a Non-ABAP "source system" in TMS, and I've set the communication system to be the solman system/client.
The CTS+ config all seems to work, I can create/release transports and add objects to transports from the EP dev system.
When I try to implement ChaRM, I create a new maintenance project. I add the portal landscape component to it, and activate change management. This works. When I try to create the task list, it fails trying to create the project IMG for the system. It gives me the error -
IMG project creation error -> see long text
Message no. /TMWFLOW/TASKLIST164
Diagnosis
You want to create a new maintenance cycle. An error has occurred.
When you create a maintenance cycle for a maintenance project in the Solution Manager (SMI project), a project is created in the Central Transport System (CTS project), per logical development system. This CTS project is required as an attribute for the transport requests.
A CTS project is always assigned to an implementation project (IMG project) in the physical system. There must be an IMG project in all physical systems in an SMI project, in which a system change (development/maintenance) can be made.
If there is no IMG project in a system, one is created automatically. The generated IMG project has the same name TEST as the SMI project, but there cannot be an SMI project and an IMG project with the same name in one system, for system-internal reasons.
In SMI project TEST there is a development system in the same physical system SMU as the Solution Manager.
System Response
If one of the development systems is in the same physical system as the Solution Manager, the IMG project cannot be created automatically.
Procedure
Create an IMG project manually in system SMU. In the path: SAP Menu -> Tools -> Solution Manager -> Project Administration.
Choose the SMI project TEST, go to the 'System Landscape' tab, and then the 'IMG Projects' tab.
Select an entry for the system SMU and try to create the IMG project. The system tells you that a system of the same name already exists, and asks you whether you want to choose another project name. Answer 'Yes', and change the project name.
You should then be able to create the task plan.
SMU (solution Manager) is not in the system landscape of this project, I expect that it is trying to create the IMG in this system since this is the communication system for portal dev. However, since it's not in the landscape, it isn't in the IMG tab to be able to create manually as described.
If I try to create the IMG project for the Portal Dev system directly in the project, I get the error -
Error getting RFC destination for logical system EPU
Message no. SMSY_PPMS_API044
Diagnosis
No RFC destination was found for the logical system 'EPU' .
System Response
The RFC connection to the system 'EPU' cannot be created.
Procedure
Create the required RFC connection in the Solution Manger System Landscape Maintenance.
Any advise would be appreciated.
Thanks,
James BlairHi James (and others),
I trust you have resolved your issues with ChaRM and CTS+.
If you are running a partuicularly extensive landscape you may want to consider a third party alternative to ChaRM.
Particularly one that integrates with CTS+ (to include non ABAP such as Portal, NWDI Java and so on).
There are several available, the one I am most falimiar with (Note: I do work with Revelation Software Concepts) is Rev-Trac and you can read user reviews at http://www.sdn.sap.com/irj/ecohub/solutions/revtrac
If you run an EcoHub search on Change and Request Management or similar the other alternatives should be returned.
Regards, Rick -
Problem reopening and/or refreshing PDF files using Acrobat Reader V. 8.0
I upgraded to Adobe Acrobat Reader V. 8.0 and have encountered problems refreshing PDF files in the Safari 2.0.4 browser when I am logged into the secure area for Value Line Publishing. Some of the PDF Files in this area can be opened and/or refreshed multiple times. Other PDF files in this area allow me to open them once. I cannot reopen those previously viewed files (or refresh the screen) -- after refreshing, the window changes to a blank white screen, and the files do not reopen.
I am perplexed because I do not have difficulty refreshing the PDF files (within Safari) using the native PDF viewer, I did not have problems refreshing files using Acrobat Reader V. 7.0 and I do not appear to have problems refreshing PDF files using Acrobat Reader V. 8.0 when I am outside the secure area or on other web sites.
I have replaced the Acrobat Reader plug-in, manually removed all remnants of previous versions of Acrobat Reader and reinstalled V. 8.0. and I also upgraded from Mac OS 10.4.8 to 10.4 9, all to no avail.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
I can also download the PDF files to my hard drive and refresh them multiple times within Safari and also using Acrobat Reader V. 8.0
The software personnel at Value Line Publishing have investigated their system and have referred me back to Apple. Has anyone heard of similar problems associated with Adobe Acrobat Reader V. 8.0 used in conjunction with Safari 2.0.4?
PowerBook G4 Mac OS X (10.3.9)Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back -
Apple 30 Inch Vertical Sync and Hoeiz Refresh Rates
I am trying to figure out the exact Vertical Sync and Horizontal Refresh Rates.
I have a dual boot setup with OS X and Ubuntu Linux on my G5 PpwerMac
I know that the Dell 30" is pretty close ( which I am using now ) but I don't want to damage my Display by using the wrong specs.
So If anyone knows the sync and refresh rates it would really be appreciated.Here is a section from the 30" Cinema's EDID data that has the info you want:
Descriptor #1 is Timing definition:
Mode = 2560 x 1600 @ 60Hz
H. Active...............2560 pixels
H. Blanking.............160 pixels
V. Active...............1600 lines
V. Blanking.............46 lines
HSync Offset............48 pixels
HSync Pulse Width.......32 pixels
VSync Offset............3 lines
VSync Pulse Width.......6 lines
Pixel Clock.............268.00MHz
Horizontal freq.........98.53kHz
Vertical freq...........59.86Hz
H Image Size............641mm
V Image Size............401mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Positive vertical polarity
* Negative horizontal polarity -
The back and forward arrows are missing, as are the house icon and the refresh icon. All that goes in that area. Can you tell me how to find them? Thanks
This article will help you restore them - [[Back and forward or other toolbar items are missing]]
-
Oracle 9i Lite and Satellite Forms on the Palm
I would like to use Oracle 9i Lite 5.0.1with Satellite Forms EE 4.1 on the Palm
The docmentation from each company refers to the other company's documentation and no instructions seem to
exist. I am begining to suspect that to abilty to use Satellite Forms and Oracle Lite on the Palm does not actually
exist and that one must develop applications in C using Code Warrior or other tools.
I would like to use a Satellite Forms application on the Palm running with the RDK to access and store tables
stored in an Oracle Lite database on the Palm. I would then use the MSYNC to move data from the palm to
my Oracle 8.1.7 database server
Satellite Forms appears to store each of its tables as a separate pdb but oracle uses a single pdb for a database
containing multiple tables. There is a check box for Oracle compatible tables but not method to associate
satellite forms tables with an Oracle Lite database except for a link to an ODBC database. The Oracle ODBC drivers
point either to the Oracle database server or to an Oracle Lite database on a PC but not on a Palm.
I can move Satelittle Forms tables from the Palm to Oracle 8.1.7 using ODBC on the PC when I do a Palm Hot Sync
using the Satellite Form conduit
I can move Oracle tables from the Palm to 8.1.7 using MSYNC, the Oracle Mobile Server, and the Oracle Lite
http conduit
I do not know how to move Satellite Forms tables on the Palm to Oracle Lite tables on the Palm.
The only way to use Satellite Forms appears to be to move Satellite Forms tables on the Palm to Oracle Lite tables
on the PC and then use Oracle Lite Msync on the PC to move the data to the Oracle server. This seems to have no
advantage over going from Satellite Forms directly to the Oracle Server via ODBC
Does anyone have any additional information about current or future capabilities. There may have been something that
worked with older versions of Oracle 8iLite 4.0 and Satellite Forms 3.5, but I do not see anything that works nowAccording to Metalink Note:207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions you shouldn't have problems, as long as your 9i Clients are at least 9.2.0.4.
-
Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Generic searches in Solman 7.1 Charm and Incident Management
Hi,
I would like to configure some GENERIC searches in the web UI for ChaRM
and incident Managment.
Something like:
Show all my Incidents
or
Show all my Change Reqeust
or
Show all tickets where I am a Change Manager.
Like it is possible in crm_dno_monitor or in the Workcenter.
Afterwards I´d like to share that with the global Sharing tool.
Does anyone know if that is possible?
thanks and Best RegardsHi thanks for your answers,
If I define a query in the workcenter, how do I get it usable in CRM WEB UI.
In CRM WEB UI I can define a search which shows every Change for a specific BP, but that does´t help me if I want to share this query. I need something which shows for every users his/her Changes.
I do not understand what you mean with 'How do I connect to CRM UI'. Via Internet Explorer.
Thanks and Best Regards
Alex
Maybe you are looking for
-
Songs I've purchased from iTunes recently aren't complete. Even though iTunes says the songs have been downloaded, the songs will abruptly cut off while being played like it's missing the rest of it. Why is this happening?
-
Remote Delta Link vs Direct Link - Federated Portal
Hi, We couldn't get our Remote Delta Links to work on our Enterprise Portal so we just built a direct link to our IViews. This link goes through the Enterprise Portal and to the IView on the BI Portal. (Points to the Producer on the Consumer) This w
-
Hey I have been searching for a way to keep the quality of my video as crisp as possible. I have a Canon Vixia HF10. When I get the media for it and play it on PE7 it is very choppy. I have tried opening a new project and changing the setting to AVCH
-
Not a 4.x or earlier version of Crystal reports error
To all: I'm using Crystal 8.5 (CR) to report on data stored in a SQL 2005 database through a Prolog Manager 2007R2 (PM) interface. CR is not connected to SQL in a native fashion. It gets to the data via .ttx files through PM that define the data ty
-
Two ongoing problems with Mail: (1) PDF's (2) Mail crashing
Greetings, Two ongoing problems with Mail: (1) When I receive PDF's in email (sender is using the Apple version of Eudora), the PDF fails to open; it shows there is 0 KB. When my co-workers with PC's receive the same email; they have no problem openi