Charm implementation: No maintenance cycle is open for the current system

Gurus,
I'm in implementation project to use charm.
I've created SDCR using charm_create, and choose transaction type subject "Development (implementation)"
After approving the change request, so that the status become "Approved", I re-open the request to set into "in development", but there's error:
"No maintenance cycle is open for the current system"
I've checked notes and search the forum but not relevant to my subject.
Please help.
Regards,

Hi Cesar,
I'm facing this issue now. I have followed Dolores blog
- The IBase is wrong: The IBase/component must represent the production system in the project landscape. RP1 is my production
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request. I have updated all roles and given the users SAP_ALL
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand. Refreshed it many times without errors
I'm on the latest level of Solman 7.1 SP8, I have implemented all the new notes as well.
I have attached a screenshot
To me it seems like a bug, but haven't found anything on marketplace. Any help is much appreciated.
Cheers
Jimmy

Similar Messages

  • ChaRM Error - "No maintenance cycle is open for the current system"

    Hello All,
    I am setting up ChaRM in development system after EGI session with SAP support. I have copied standard transactions to custom ones and created Maintenance and Implementation project to run test of all scenarios.
    I now come across error of "No maintenance cycle is open for the current system" after I create a change request and in the change document, I cannot see it link with task list and the error message is displayed. I tried it with custom transaction as well as standard SAP transaction (SDCR) and get the same error.
    What links a document to a maintenance cycle? Where can I see the config of this setup? I am trying to see where it is broken. I am using the correct IBASE number (production client in logical component), I tried to create a new logical component, new projects with correct settings but it still gives this error message. Please advice.
    Thanks and regards,
    Nischal

    Hi
    did you also unlock the maintenance cycle and open for changes in solar_project_admin by right click
    do check this blog
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples-final-points-and-appendix
    Question no 17
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    Hope it solves
    Regards
    Prakhar

  • No maintenance cycle is open for the current system

    Hello!
    I have problems to use CharM functionality due to following error:
    <b>No maintenance cycle is open for the current system</b>
    The error arises when I try to set a urgent correction in status "In Development" I get the following error, menwhile I have an valid maintenance cycle active.
    I use CharM functionality for the solution consisting of an single system with two clients:
    SRM:000 (as DEV-system) (system role: source system)
    SRM:100 (as PRD-system) (system role: target system)
    - No maintenance cycle is open for the current system (meanwhile I have a valid maintenance cycle created and activated).
    Futhermore I get the additional warning:
    IBase component is not a productive system in system lanscape
    Can some help me with this issue?
    Thank you very much!
    regards
    Thom

    Hello Kriti,
    thank you very much for your response.
    Unfortunately I also thought about it.
    Basically my CharM procedure looks as follows.
    I send the message from productive client (I have only one system with client 000 and 100)  to Service Desk in SOLMAN.
    There I can see the IBase of the productive client.
    Then I create a urgent correction by assigning IBase to this IBase of productive client. It is also possible to change the IBase in change mode, so I have tried all the possible values of IBase and get the same error.
    My problem also is that I have multiple values of IBase assigmenets, it means one system has multiple assigments to IBase components.
    I do not know how to delete/cut these settings....
    Thank you for your further help!
    regards
    Thom

  • Error "No maintenance cycle is open for the current system"

    Hi,
    I'm setting up the ChaRM for test purposes.
    I have done everything according to SAP Expert Guided session requirements (like Basic configuration, Landscape and TSMS set-up) and also was reading and checking the following Blog " Change Request Management scenario: Working examples"
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
    Everything seems to be ok:
    1) Landscape ok, IBase created and active, Partners assigned to each component
    2) Maintenance project created and Maintenance cycle set to "Development with release"
    3) I can easily create Change request (I tried Normal correction), approve it.
    4) When I open Change Document for approved change reques - it gives error "No maintenance cycle is open for the current system" and I can't proceed with setting Change document status to "In development".
    In Change Request I indicate the only IBase (1) and as Component - SolMan clent 803, whish is set-up like PRD.
    What could be wrong?
    I tried reading all threads but did not get solution - there were suggestions to activate maintenance cycle (in my case it active), to check if business partners are assigned to IBase components (in my case done),
    What else?
    Thanks in advance,
    Ausra Gustainiene

    Hi Ausra,
    Please, take a look at this topic:
    Change Request Management scenario: Usual questions and known errors
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    17. Error: "No maintenance cycle is opened for the current system"
    Best Regards,
    Fernando Rocha

  • No Maintenance Cycle is open for current system

    Hi Experts,
    We are facing a peculiar problem in ChaRM implementation.
    We have successfully created the maintenance cycle .But when we try to create change transaction & get it approved then it is showing an error : " No Maintenance cycle is open for current system".
    We have checked all the configuration like STMS & system landscape too. All are working fine.
    Any help will be appreciated.
    Pooja Mittal.

    Hi,
    you might have different reasons why it is not working
    1 check the status of the tasklist (or cycle) and of your project (service desk document) (via SOLAR_PROJECT_ADMIN)
    2. check your authorisation for project
    3. check the subject code of the change request (Implementation or Maintenance project ?) check
    CRMD_ORDER on your change request
    4. check the type of project you have activated (should match the above subject code) via SOLAR_PROJECT_ADMIN
    5. check the target system of your change request : it should be a  productive environment
    I hope it helps
    br Xavier

  • Should OKP1 being all closed and only be opened for the current period ?

    Guyz,
    In OB52 (Financial closing period) , only "open period" being input on it. So, basically the closing period in OB52 is by opening the period provided to be posting.
    Then how about OKP1?
    It's provided to lock the actual period , actual transactions, or to lock the plan period or plan transactions..but the question is:
    a. Should it be all closed (ticked mark all transactions & all periods) except for the current period that is provided to be posting as period determined in OB52...For example, it is now June, then all periods & transactions other than June is being ticked mark.
    OR
    b. Should it be all opened except for the period that is being closed? For example, it is now June, so periods & transactions of period January to May are being ticked mark (closed).
    Which of the options is the best practice?
    Need your answers asap plz.... Thanking you ..

    Hello,
    For example in OB52, if you have opened for June, i.e.,
    06 of 2009 to 06 of 2009 (1st Period)
    In such case,
    In OKP1, you need to only untick June for all the months and close all remaining months (Untick June and tick all other months and transactions).
    Note that your planning activities for all the year must have been completed. Otherwise, you cannot enter the plan values.
    Regards,
    Ravi

  • Details of open invoices for the current year/ material price analysis

    Hi,
    I'm very new to SAP SD,MM modules. Can any one help me in the following of my requirements?
    1. How to get the details of open invoices for the current year? Which table should I look into?
    2. I have to create a report to display material price analysis. How should I do that?
    3. How to develope a report to list out all the Open Sales Order with earliest ship date and requested ship date
    4.How to create an interactive report for displaying plant status to know the status of a particular material
    5. How to develope a report on Sales Order displaying Sales order Number, Sales order date, Material, PO Date and Customer requested date
    Thanks in advance!!
    Uma.
    Message was edited by:
            Uma Ravi

    Hi Ravi,
    for 3, 4, 5 --> u can go through the code ...
    REPORT ZEX2  MESSAGE-ID arc NO STANDARD PAGE HEADING.
    Tables :kna1,vbak.
    SELECT-OPTIONS : so_vkorg FOR  vbak-vkorg OBLIGATORY,
                     so_vtweg FOR  vbak-vtweg OBLIGATORY,
                     so_spart FOR  vbak-spart,
                     so_kunnr FOR  kna1-kunnr.
    DATA : BEGIN OF sales_open OCCURS 0 ,
           vbeln LIKE vbak-vbeln,
           auart LIKE vbak-auart,
           kunnr LIKE kna1-kunnr,
           bstnk LIKE vbak-bstnk,
           lfstk LIKE vbuk-lfstk,
           fkstk LIKE vbuk-fkstk,
           gbstk LIKE vbuk-gbstk,
           END OF sales_open.
    DATA : BEGIN OF itm_sales OCCURS 0,
           vbeln LIKE vbap-vbeln,
           posnr LIKE vbap-posnr,
           matnr LIKE vbap-matnr,
           kwmeng like vbap-kwmeng,
           lfsta LIKE vbup-lfsta,
           lfgsa LIKE vbup-lfgsa,
           fksta LIKE vbup-fksta,
           fksaa LIKE vbup-fksaa,
           gbsta LIKE vbup-gbsta,
           END OF itm_sales.
    DATA : l_kunnr LIKE kna1-kunnr,
           l_vkorg LIKE vbak-vkorg,
           l_vtweg LIKE vbak-vtweg,
           l_spart LIKE vbak-spart.
    DATA: v_statusl(20) TYPE c,
          v_statusb(20) TYPE c,
          v_statusf(20) TYPE c,
          v_statusg(20) TYPE c,
          v_status(20) TYPE c,
          v_field(1) TYPE c.
    data : v_openqty like vbap-kwmeng.
    **Selection Screen Validations.
    AT SELECTION-SCREEN.
      PERFORM validations.
    *&      Form  Validations
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM validations.
    **Customer
      IF NOT so_kunnr[] IS INITIAL.
        SELECT SINGLE kunnr INTO l_kunnr
               FROM kna1
               WHERE kunnr IN so_kunnr.
        IF sy-subrc NE 0.
          MESSAGE e002 WITH text-005.
        ENDIF.
      ENDIF.
    **Sales Organization
      IF NOT so_vkorg[] IS INITIAL.
        SELECT SINGLE vkorg INTO l_vkorg
               FROM tvko
               WHERE vkorg IN so_vkorg.
        IF sy-subrc NE 0.
          MESSAGE e003 WITH text-006.
        ENDIF.
      ENDIF.
    **Distribution Channel
      IF NOT so_vtweg[] IS INITIAL.
        SELECT SINGLE vtweg INTO l_vtweg
                FROM tvkov
                WHERE   vkorg IN so_vkorg
                 AND    vtweg IN so_vtweg.
        IF sy-subrc NE 0.
          MESSAGE e004 WITH text-007.
        ENDIF.
      ENDIF.
    **Division
      IF NOT so_spart[] IS INITIAL.
        SELECT SINGLE spart INTO l_spart
                FROM tvta
                WHERE   vkorg IN so_vkorg
                AND     vtweg IN so_vtweg
                AND     spart IN so_spart.
        IF sy-subrc NE 0.
          MESSAGE e005 WITH text-008.
        ENDIF.
      ENDIF.
    ENDFORM.                    " Validations
    Top-of-page.
    PERFORM sales_top_of_page.
    Start-of-selection.
    PERFORM sales_sel.
    *&      Form  sales_sel
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM sales_sel.
    SELECT vbeln auart kunnr bstnk
         lfstk fkstk gbstk
         INTO TABLE sales_open
         FROM vbakuk
         WHERE vkorg IN so_vkorg
         AND   vtweg IN so_vtweg
         AND   spart IN so_spart
         AND   kunnr IN so_kunnr
         AND gbstk NE 'C'.
      LOOP AT sales_open.
        WRITE:/4 sy-vline,
               5 sales_open-vbeln HOTSPOT ON COLOR 2 INTENSIFIED OFF,
               16 sy-vline,
               17 sales_open-auart COLOR 2 INTENSIFIED OFF,
               27 sy-vline,
               28 sales_open-kunnr COLOR 2 INTENSIFIED OFF,
               40 sy-vline,
               41 sales_open-bstnk COLOR 2 INTENSIFIED OFF,
               55 sy-vline,
               56 sales_open-lfstk,
               76 sy-vline,
               77 sales_open-fkstk,
               96 sy-vline,
               97 sales_open-gbstk ,
               117 sy-vline.
        HIDE sales_open-vbeln .
      ENDLOOP.
    ENDFORM.                    " sales_sel
    *&      Form  sales_top_of_page
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM sales_top_of_page.
      WRITE:/4 sy-uline(114),
         50 'OPEN SALES ORDERS' COLOR 7 INTENSIFIED ON .
      WRITE: /4 sy-vline,
              5 'SalesOrder' COLOR 1 ,
              16 sy-vline,
             17  'OrderType' COLOR 1,
             27  sy-vline,
             28  'Customer' COLOR 1,
             40  sy-vline,
             41  'PoNumber' COLOR 1,
             55  sy-vline,
             56  'Delivery Status' COLOR 1,
             76  sy-vline,
             77  'Billing Status' COLOR 1,
             96  sy-vline,
             97  'Processing Status' COLOR 1,
             117  sy-vline .
      WRITE:/4 sy-uline(114).
    ENDFORM.                    " sales_top_of_page
    AT LINE-SELECTION.
      SELECT       a~vbeln
                   a~posnr
                   a~matnr
                   a~kwmeng
                   b~lfsta
                   b~lfgsa
                   b~fksta
                   b~fksaa
                   b~gbsta
                   INTO TABLE itm_sales
                   FROM vbap AS a JOIN vbup AS b
                   ON a~vbeln EQ b~vbeln
                   AND a~posnr EQ b~posnr
                   AND b~gbsta NE 'C'
                   WHERE a~vbeln EQ sales_open-vbeln.
      IF NOT sales_open IS INITIAL.
        LOOP AT itm_sales.
          at end of vbeln .
          sum.
          v_openqty = itm_sales-kwmeng.
          endat.
          WRITE:/5  itm_sales-vbeln,
                    itm_sales-posnr,
                    itm_sales-matnr,
                    itm_sales-kwmeng,
                    itm_sales-lfsta,
                    itm_sales-lfgsa,
                    itm_sales-fksta,
                    itm_sales-fksaa,
                    itm_sales-gbsta.
        ENDLOOP.
      ENDIF.
    skip 2.
      write:/  'open Quantity for the order is ', v_openqty .
    for 1.
    open invoices..
    SELECT vbeln
             fkart
             kunag
             gbstk
             INTO TABLE it_billing_h
             FROM vbrkuk
             WHERE vkorg IN so_vkorg
             AND vtweg IN so_vtweg
    *        AND spart IN so_spart
             AND kunag IN so_kunnr
            and   year in p_year                  ---->"parameter for year..
             AND gbstk NE 'C'.                   "----> open invoices
    for 2..
    2. refer TABLES mara, EINA ..
    regards,
    VIjay

  • Scroller not appearing in the popup when opened for the second time

    Hi,
    I have a popup window which has three tabs A, B, and C. My tab A has BorderContainer > Scroller > Vgroup
    When opened for the first time, I can see the scroller. But , when opened for the second time, the scroller does not appear and the content in th Border container seems truncated.
    Please help.

    No answers, but I may be seeing something similar.
    I'm converting a project from Flex 3 to 4. In a popup (Spark TitleWindow) I have a some TabNavigators. On subsequent openings of the popup, the contents of the navigator children don't always render. After some changing of various Halo components to their Spark equivalents, I thought the problem had gone away. But the problem seems to have come back.
    In my case, I'm not sure if the "subsequent opening" is the key issue. Sometimes, the contents of nested TabNaviagtor children don't render on the first opening. although the first child content always renders. But the problem seems to increase in subsequent openings. (I.e. more children of TabNavigators don't render.)
    Perhaps not connected, but I notice when this happens, the outside borders of dataGrid components don't render in components outside of TabNavigators. I suspect there's a simple thing I need to to do to fix this, but I haven't found it. Any hints or insights would be welcomed.

  • I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this since yesterday. Is this right??

    I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??

    No. Quit and try again. If that fails again,
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • When Webdynpro popup is opened for the 2nd time, image is not shown

    Hi Experts,
    We have created a WebDynpro with a popup window.
    This is shown in an iView in the portal.
    If the popup is opened for the first time it looks good.
    If the popup is opened for the 2nd time the image is not shown and the title is shown with a different font.
    If we do a preview of the iView in PCD content area, the title and image is shown and the right font is used: also when you open this for the second time.
    If the iView is in a role the problem appears.
    How can this be solved?
    Thanks in advance,
    Joeri

    Sounds like a wrong reference to a stylesheet.
    Use IE Developer Toolbar or Firefox to debug the code. Or view source (of the popup) and search for .css. Do the same for the popup that doesn't work. Check if there are differences.
    Good luck!
    Noel

  • How can I make iCal in Lion open to the current date?

    I just updated from Snow Leopard to Lion and have had all of the frustrations with changes to iCal that are well-documented here and elsewhere.  One issue I haven't seen addressed, however, is a new behavior after quitting and re-starting.
    Previously, no matter what month/day/week I was viewing when I quit iCal, it would open the next time to the current (month/day/week).  Now, it opens to whatever date(s) I was last viewing when I quit.
    This is highly annoying - 99% of the time, if I quit iCal while looking at (some date 6 months into the future), that is NOT the date I'm looking for when I re-launch.  It's much more consistent behavior to always re-open to the current date, in whatever view (month/day/week) I previously used.  So if today I launch iCal and I'm thinking about adding an event a month in the future, I open iCal, change to month view if needed, and go forward one month.  This is the way iCal always worked previously.  Instead, the version in Lion might leave me on any random month, depending on what I was doing when I closed the program the last time, and so I have to figure out "what month/week am I looking at?" before I know how to navigate.  Very irritating.  (As is the move of the forward/back buttons away from the month/day/week buttons, necessitating that I move the cursor to two different areas of the screen in order to navigate.  Whose idea was THAT?)
    I haven't found a preference to resolve this bizarre behavior change.  Can anyone help?

    Hi,
    I don't know of a preference, but have you used ⌘-T in iCal?
    Best wishes
    John M

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • How can I get a digital WDT that includes all samples, not just the one for the current time step...?

    See block labeled ''digital data'' in my attachment for reference. Currently, only the digital data point for the current time step can be seen (it is deleted before the next one appears). However, I would like it display all the samples in the table like in the example found at this link under ''Digital Waveform Control'':
    http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/fp_controls_indicators/ 
    Many thanks for any suggestions! I am new to Labview, so I appreciate your help.
    Solved!
    Go to Solution.
    Attachments:
    myproject.vi ‏220 KB

    Hey westerman111,
    If you're looking to produce have your display include the solution information from previous solver steps, you will need to buffer the previous data. The way to implement this in a Control Design & Simulation Loop is using the Memory.vi found under Control Design & Simulation > Simulation > Utilities > Memory.vi. It will allow you to save previous information generated in the simulation environment for letter solution steps.
    I've attached an example that should get you started in using the Memory.vi.
    I would also make sure that what you're looking to accomplish is suitable for the Control & Simulation Loop. I know you mentioned you were new to LabVIEW so I wanted to make sure you were heading off in the right direction. Is there a particular reason why you are using the Control & Simulation Loop instead of a standard While or For Loop? The Control Design & Simulation loop is unique in that it calculates the solution of a dynamic system at a prescribed time step and ODE solver. It also provides the tools to interact with the model you are solving during execution. However, if you are simply looking to perform data acquisition and measurements (instead of dynamic model simulation) I would recommend using standard LabVIEW functions.
    Here are some useful references for getting start with both LabVIEW and the Control Design and Simulation Module.
    Tutorial: Getting Started with Simulation (Control Design and Simulation Module)
    http://zone.ni.com/reference/en-XX/help/371894G-01/lvsimhowto/sim_h_gs/
    Getting Started with LabVIEW
    http://digital.ni.com/manuals.nsf/websearch/ba2fb433a7940e7a862579d40070cc2c
    Tim A.
    National Instruments
    Attachments:
    myproject_edit.vi ‏249 KB

  • Node id does not exist for the current application server id  on forms

    Hi,
    We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
    We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
    while opening oracle forms we are getting" Node id does not exist for the current application server id "
    on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
    Fnd_nodes... which matches ( there is no mismatch of application server id) .
    We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
    Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
    Can some one guide as to which file has this message "Node id does not exist for the current application server id "
    and what could be the reason for this.
    Help is appreciated.
    Regards,
    Milan

    I already tried the mentioned metalink note id but it did not work.What did you try exactly?
    Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
    i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
    Thanks,
    Hussein

Maybe you are looking for