Charset Problems when sending to database

Hi everyone,
I have a form connected to a mysql database (via a php file). People fill out the form and send the values via a button to the database. Works just fine, but when it comes to special characters like German ÖÄÜ it saves values like Ã¼ in the database. I have no idea what charset livecycle is using by standard (utf_8?) and how to change that.
any ideas?
Thanks for helping out

Found the solution:
In the php script that processes the data I had to insert this line:
mysql_query("SET NAMES 'UTF8'");
now it works like charm...

Similar Messages

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

You have either entered the wrong SMTP server info or they have blocked the sending of e-mails from outside their network. That message indicates that you are not permitted to send through that server from the network you are using to connect.
Contact them again. There is no magic that will allow you to bypass this.

After updating to the new ios5 with my 4S , no wifi connection (at home), problem when sending or receiving email

After updating to the new ios5 with my 4S, no wifi connection and problem when sending or receiving email. I had no issue before the update... I am very disappointed

Did you already try to reset your network settings in Settings/General/Reset?

Text/html processing error with Acrobat Reader when sending to database

Hi everyone,
I have a problem that occurs in certain versions of the Acrobat Reader, with Acrobat Professional the error message does not pop up.
In Acrobat Reader however, when sending the form to a php file to fill a database an error pops up
"Content type text/html couldn´t be processed"
Nevertheless it works fine, except the fact that the confirmation "successfully sent" that should pop up (and does in Acrobat Professional) does not appear due to this processing error. What can I do?
Thanks for supporting!

Hi,
I'll only attempt the first part:
See this discussion where event.target.path.toString().substring(0, 4); was used to get the first four letters of the path. If that equalled "http", then the form was opened in a browser.
http://forums.adobe.com/message/2840942#2840942
I can't contribute on the other issues.
Niall

I face problem when i run database in my computer

dear all,
I face one problem when i want run oracle 9i in my computer, when i open enterprise and i want open my database their one massage it come it return ( your database curnntly is down try to connect with sysdba and change the status to open ), if i enter with sqlplus it will come (ora01034: oracle not availble ).
this is my problem .
for your information i see all services it is running no any problem i thing with service
so, pls hlep me
thanks......

user12175789 wrote:
dear all,
I face one problem when i want run oracle 9i in my computer, when i open enterprise and i want open my database their one massage it come it return ( your database curnntly is down try to connect with sysdba and change the status to open ), if i enter with sqlplus it will come (ora01034: oracle not availble ).
this is my problem .
for your information i see all services it is running no any problem i thing with service
so, pls hlep me
thanks......Try to open your database from sqlplus and post the output of SQL*Plus
sqlplus "/ as sysdba"
select status from v$instance;If it's not open, try to open it
startupPlease post all result from SQL*Plus output

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

Textarea problem when sending mail (only Firefox)

When sending mail using textarea item with multiple lines, carriage returns are taken away in resulting mail when sent in Firefox, but not in IE.
To send mail, I call Javascript function that gets textarea value ($v or $x.innerHTML give the same result) and calls then on-demand process that calls in turn APEX_MAIL function.
Igor

Thank you, Jari!
"pre" did the trick. Line breaks are OK now.
There is one small inconvenience, though: font becomes Courrier instead of sans-serif type. But this is less disturbing than missing line breaks.
Igor

Problem when send an email with mail client!

Hi!
My mail server have MTA front end and Message Store back end with version:
./imsimta version
Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)
libimta.so 7u2-7.02 64bit (built 02:28:03, Apr 16 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
SunOS SMSG 5.10 Generic_139556-08 i86pc i386 i86pcMy users and I are having problem following: Send an email very slow, mail client is connected to front end but mail is not delivered, after that, I stop and resend this email several times then it is can delivered. While the mail was not send, i can telnet to front end with port 25. My users and I are using Thunderbird and Microsoft Outlook. What is problem on my mail server ?
I see time on MTA front end and Message Store are not synchronized, maybe this could be the problem?
Thanks!

NguyenPhuc wrote:
Are you using any kind of MTA spam filter plugin?I removed plugin spam filter, now on MTA server don't have plugin spam or virus !Are you saying you did have a spam filter plugin enabled (if so which one(s)) and you have just disabled it?
Are you receiving an excessive number of emails?No, total of number messages in my mailbox is about 1000 emails.I meant is the MTA receiving a large number of emails -- i.e. do you see a lot of emails coming in (mail.log_current)?
Also try the following and see where the delay in accepting emails occurs:
telnet <mta> 25
mail from: [email protected]
rcpt to: [email protected]
data
Subject: test email
To: [email protected]
From: [email protected]
body
.e.g.
-bash-3.00# telnet server 25
Trying 10.15.10.33...
Connected to server.aus.sun.com.
Escape character is '^]'.
220 server.aus.sun.com -- Server ESMTP (Sun Java(tm) System Messaging Server 7u3-16.01 64bit (built Apr 6 2010))
mail from: [email protected]
250-2.5.0 No HELO/EHLO seen; continuing anyway, [10.15.10.33].
250 2.5.0 Address Ok.
rcpt to: [email protected]
250 2.1.5 [email protected] OK.
data
354 Enter mail, end with a single ".".
To: [email protected]
From: [email protected]
body
250 2.5.0 Ok, envelope id [email protected]
quit
221 2.3.0 Bye received. Goodbye.
Connection to server.aus.sun.com closed by foreign host.Regards,
Shane.

Problem when sending mails with excel attached

Hi
I'm tryin to send mails via SAPOffice with attached excel documents. I'm using FM SO_NEW_DOCUMENT_ATT_SEND_API1. I have a problem with the code. Here I post it:
DATA: ti_objbin    LIKE solisti1   OCCURS 150 WITH HEADER LINE,
ti_objhex    LIKE solix      OCCURS 150 WITH HEADER LINE.
DATA: BEGIN OF i_excel,
sobid(8) TYPE c,
tab1 TYPE X VALUE 09, "tab code
name(80) TYPE c,
tab2 TYPE X VALUE 09, "tab code
city(40) TYPE c,
tab3 TYPE X VALUE 09, "tab code
kostl(10) TYPE c,
tab4 TYPE X VALUE 09, "tab code
ktext(20) TYPE c,
tab5 TYPE X VALUE 09, "tab code
fasig(10) TYPE c,
tab6 TYPE X VALUE 09, "tab code
ruta(255) TYPE c,
fin TYPE X VALUE 13, "carriage return
END OF i_excel.
i_excel-sobid        = wa_datos-sobid.
i_excel-name         = wa_datos-name.
i_excel-city         = wa_datos-city.
i_excel-kostl        = wa_datos-kostl.
i_excel-ktext        = wa_datos-ktext.
i_excel-fasig        = wa_datos-fasig.
i_excel-ruta         = wa_datos-ruta.
WRITE i_excel TO ti_objbin-line.
APPEND ti_objbin.
CLEAR ti_objbin.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data              = docdata
put_in_outbox              = 'X'
TABLES
packing_list               = ti_objpack
object_header              = ti_objhead
contents_bin               = ti_objbin
contents_txt               = ti_objtxt
*      contents_hex               = ti_objhex
receivers                  = ti_reclist
EXCEPTIONS
too_many_receivers         = 1
document_not_sent          = 2
document_type_not_exist    = 3
operation_no_authorization = 4
parameter_error            = 5
x_error                    = 6
enqueue_error              = 7
OTHERS                     = 8.
I have used this code before, in 4.6C release and it works fine, but now I'm on ECC5.0 and when i check the code, the next error message is generated: ""I_EXCEL" cannot be converted to a character-type field." If i try using MOVE i_excel TO i_objbin-line instead of WRITE, the error message changes to: ""TI_OBJBIN-LINE" and "I_EXCEL" are not mutually convertible in a Unicode program. program.". I have tried using ti_objhex table instead of ti_objbin in order to use 'context_hex' parameter (instead of 'context_bin') on FM, but i get the same result.
I've been searching any other FM to do this, and i've found more FM of SOI1 function group but i didn´t get the expected result. So i need to send the message with the excel attached, using this FM or any other, but I need some help. Anyone can help me?
Thanks and Regards

hi this is a simple example to send the excel sheet as a mail
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
             con_tab(5) TYPE c VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat.

Transparency problems when sending artwork

Hello, I have a strange problem with one of the packaging artworks I am trying to send to China for printing. I have sent other packaging files with the exact same design and flashes (but different products) and they have all been proofed back fine, but for some reason the printers in China are saying this particular file is opening up as below, but when I open it - it looks as is should do to me.
Is there something I need to do my end for it to open properly at their end? I will be sending hundreds of these packaging files, so would like to not keep running into this problem.
thanks
As you can see where I have subtle "flashes" on the correct one, they have changed to massive 100% ones on the China one.
Also the Banner at the top has subtle 20% lines whereas they have gone to 100% on the China one.
Confused!!!
*click on the image to enlarge it

They are opening it in illustrator. They supply me a cutter guide in illustrator and I send it back with artwork. Other files have opened ok at their end with the exact same design. But having problems with others as the above example, which doesnt make sense as its the same flashes and banners.
I was wondering if there was something I can do my end, to ensure artwork is recieved exactly as I send it. I've been looking into transparency flattening. But was wondering if someone knew of something obvious I was missing.
cheers.

Is anyone else having a problem when sending the first email of the day from iCloud?

For the past week I startup my iMac and send an email via my iCloud account. I finish typing it out, it says the whole time that it is saving the message. I hit send, the task bar comes up and shows that the meessage has been sent. I look in the 'sent' box and nothing! It didn't send and there is no trace of it in the 'outbox' or junk or drafts, not sure if it something that iCloud has had fixed in the 'Drafts' section but my very first email is lost to cyberspace every morning.
Very irritating when you have just typed a huge email and forgot to copy it to the clipboard (in case) it dissapears. Just happened asgain so I thought I'd post it here and see who else is experiencing it.
Any help would be

Anyone? I was hoping my problem would just 'fix itself'... but I still have some clients telling me they're not receiving any email from me. I've since deleted that account on my computers and re-added it. But still having the same issue.

Sync problems when sending to soundtrack pro

I am currently having a problem with a mono track audio/video clip sliding out of sync when I send it to soundtrack pro as referenced file only with 10 sec handles. When I send the entire clip the sync problem doesn't occur.
I have used soundtrack pro before and never encountered this problem.
I'm on FCP 6.0.3.
Thanks.

Turns out the audio needed to be linked to the .motn sequence.

Mail encoding problem when sending from Iphone

Hello,
I'm a new user with iPhone.
I have my iphone and on my computer, i have outlook 2010.
The problem is when i read a message sent by my iPhone in my Outlook 2010 , all accent carators(àéîû...) disapears and ere replaced by a strank caractor.
The fact is, when someone else send me email in my Outlook account, i see all accent caractor, but not from my iphone...
So the problem is it in my iphone or my Outlook?
Do you have an idea for the solution?
Thanks a lot
Pascal

new String(content.getBytes("iso-8859-1"))That code does this:
1. Encode content from chars to bytes using ISO-8859-1.
2. Decode those bytes to chars using the system's default encoding. (i.e. assuming they were encoded using the system's default encoding, which they weren't necessarily.)
Now, if the system's default encoding is ISO-8859-1 then that results in you getting back the original string unchanged. This at least is benign. If the system's default encoding is something else then that may result in you getting back a damaged version of the original string.
So, that construct is at best pointless and potentially harmful. Don't bother with it. And note that since the default encoding may differ from one operating system to another, that would explain why you see different results from different operating systems.

HTMLDB_MAIL.SEND problem when sending HTML

We had a test application running off of the Oracle hosted site. We used HTMLDB_MAIL.SEND and P_BODY_HTML successfully. However, now we are running on our own hosted site of the production release of 1.6 (no code changes whatsoever, just an export/import). When we send the P_BODY_HTML it is not converted to html, it is sent as text with the html tags embedded.
In the meantime we have written our own mail procedure, but we were hoping the version of 1.6 that is available was the same as the hosted version.
Is there something else we should be aware of?
Thanks!

Joel,
I have the following with P_EMAIL_BODY my text body:
create or replace PROCEDURE "MR_SEND_MAIL"
( P_TO_EMAIL IN VARCHAR2,
P_EMAIL_BODY IN VARCHAR2,
P_EMAIL_SUBJ IN VARCHAR2 ) is
L_ERRMSG VARCHAR2(200);
L_BODY VARCHAR2(4000):='';
begin
l_ERRMSG := 'HTMLDB_MAIL.SEND()';
L_BODY:= L_BODY||'<HTML><HEAD><META http-equiv=Content-Type content="text/html; charset=iso-8859-1">'||chr(10);
L_BODY:= L_BODY||'<META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD>'||chr(10);
L_BODY:= L_BODY||'<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">'||chr(10);
L_BODY:= L_BODY||replace(P_EMAIL_BODY,chr(10),'<BR>')||'</BODY></HTML>'||chr(10);
HTMLDB_MAIL.SEND(
P_TO => P_TO_EMAIL,
P_FROM => '[email protected]',
P_BODY => 'this must be viewed by an html enabled client',
P_BODY_HTML => L_BODY,
P_SUBJ => P_EMAIL_SUBJ);
l_ERRMSG := 'PUSH_QUEUE.';
BEGIN
wwv_flow_mail.push_queue(
P_SMTP_HOSTNAME => 'gilbert.esc.net',
P_SMTP_PORTNO => '25');
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20080,'MR_SEND_MAIL: '||l_ERRMSG);
END;
end;
It does not work properly. I'm using Groupwise and have my client set for HTML.
Should I have mult-part somewhere?
Any help be appreciated, Bill
Message was edited by:
Bill Carlisle

Problems when sending e-mails to a large number of...

Hello, I've noticed that I have a problem sending e-mails to multiple users, such as when I choose a group to send to instead of single users.
Also, when I reply to all, I can see all the recipients and the subject (everything is still intact when I check my sent messages after it's sent as well), but when I log onto my Gmail and check, the sent e-mail has no subject and is only sent to a few of the recipients.
Anyone have any idea what's wrong?

Bump

Charset Problems when sending to database

Similar Messages

Maybe you are looking for