Chart series should display center of the x-axis lines

Hi,
I am using StackedColumn chart in my application and i want the series should be display center of the x-axis. Currently its displaying on the x-axis line.
Thanks

hide the axis and make your own using one single row table for the x-axis and a single column table for the y-axis

Similar Messages

HP PSC 1300 Series printer does not print the entire last line on page

Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

Pie chart legend should display values and percents

Hi All,
Can any body suggest me how to display values and percent in pie chart legend.Thanks in advance.
Edited by: 997414 on Apr 1, 2013 11:25 PM

Hi,
I used this tag : <SliceLabel textType="LD_TEXT_PERCENT"/>
My full graph;
chart:
<Graph depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_AUTO_GRADIENT" graphType="PIE"><LegendArea visible="false" automaticPlacement="AP_NEVER" position="LAP_BOTTOM" /><LocalGridData colCount="1" rowCount="{count(.//DSYATIRIMDAGILIMANA_ROW)}"><RowLabels><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="RAPORAD" /></Label></xsl:for-each></RowLabels><DataValues><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><RowData><Cell><xsl:value-of select="ORAN" /></Cell></RowData></xsl:for-each></DataValues></LocalGridData>
<SliceLabel textType="LD_TEXT_PERCENT"/>
</Graph>
I hope, It helps you since I figure it out in very very hard way.
This is the main reference : http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html

Gantt Chart Series bar display problem

Dear colleague
Am looking for your help¡K
I developed Gantt Chart business graphics exactly as explained in the tutorial, but the result I got just display points instead of displaying bar as shown the graphic pasted in the tutorial.
Can you tell what is the option or the property that I supposed to modify to display that bar.
This is my be easy for you, but for me it¡¦s difficult since I don¡¦t know it. º
Regards,
Husain..

Thanks Erin for your immediate reply...
I set the Marker shape to None, but still I see only points, is there any property, my effect that.
Regards'
Husain

JPanel to be displayed center of the screen - GlassPane and JFrame

Hi,
I have a JFrame whereby I display a JPanel which has two buttons. When the JPanel is displayed, focus must be on the JPanel and user must select something on the JPanel before focus goes back to the JFrame. I've used a glassPane to do
which works correctly however, my JPanel is coming up at the top of the JFrame rather than in the middle. I've tried panel.setLocation but this doesn't seem to be working.
Hope you can help,
Thanks
some of the code:
JFrame myFrame = new JFrame();
JPanel glassPanel = new JPanel();
glassPanel.setOpaque(false);
JPanel confirmPanel = createNewConfirmPanel();
glassPanel.add(confirmPanel);
myFrame.setGlassPane(myFrame);
glassPanel.setVisible(true);
in createNewConfrimPanel() I call setLocation(x,y)

Thanks db.
Just doing some more debugging and my problem is in this class -
public class RoundedPanel extends JPanel {
public RoundedPanel(){
super();
public boolean isOpaque() {
return false;
public void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g;
Shape rect = new RoundRectangle2D.Float(0,0,getWidth()-5,getHeight()-5, 50,50);
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
Paint paint = new GradientPaint(0,0,Color.white, 0,getHeight(), Color.lightGray);
g2.setPaint(paint);
g2.fill(rect);
g2.setColor(Color.black);
g2.draw(rect);
My panel extends RoundedPanel above. My problem is in paintComponent..I can't see where it is setting location.
Thanks

Which macbook pro configuration should i buy for the non retina line?

i can't deside if it is worth it to upgrade to the 2.9GHz dual-core intel core i7 or stick with the stock one. Also im not sure if 8gbs of ram is going to be enough even though it is the max the cpu will allow. I am planning to use my Macbook pro for highschool,photo editing in Lightroom, Photoshop, and the usual like web browsing,email,etc (I'm not using Photoshop/Lightroom for my job btw just for a hobby). also i might be playing Minecraft and might be using Adobe Premiere pro for video editing. Please leave your options i'm getting it for christmas so the faster the better.

Someone please check my math. The data I see places the rMBP with higher performance and lower cost than the MBP.
I looked at the MaBook Air (MBA), MacBook Pro (MBP), and Retina MBP (rMBP) price and performance and the 13” rMBP appears to take the cake with the MBA in second place and the MBP a distant third. The MBP has the slowest graphics and slowest standard processor for a higher price than either the rMBP or the MBA. The MBP also weights more (4.5 lbs.) and has the worst battery life (7 hours). An option in the MBP’s favor is it can have a slower but larger disk while the MBA and rMBP must use the smaller SSDs.
All the processor configurations below are (±10%) in speed compared to the MBA so processor speed is not a major differentiator. However the graphics speeds differ significantly with the MBP at the bottom with an HD 4000, the MBA in the middle with an HD 5000, and the rMBP at the top with Intel Iris Graphics.
For lower price I would choose a 1.3 GHz i5 MBA with 8 GB of RAM and a 256 GB SSD for $1,400. For higher performance I would choose the 2.4 GHz i5 rMBP with 16 GB of RAM and 256 GB SSD for $1,700. If I needed more than 256 GB of storage then I might consider the MBP with a 500 GB or 1 TB disk, but that would sacrifice performance both in graphics and I/O speed.   Instead of a larger system disk one could consider placing some of the storage on the 256 GB SSD and some on an external 1 TB hard disk.
Similar configurations:
MBA 1.7 GHz i7, 8 GB RAM, 256 GB SSD: $1,550 <— 2nd place
          Mactracker 7284 system benchmark plus HD 5000 graphics
          3 lbs. 12 hours of battery life
MBP 2.5 GHz i5, 8 GB RAM, 256 GB SSD: $1,700 <— 3rd place
          Mactracker 6690 system benchmark plus HD 4000 graphics
          4.5 lbs. 7 hours of battery life
          8% slower CPU performance on Mactracker benchmarks
          compared to the MBA
MBP 2.9 GHz i7, 8 GB RAM, 256 GB SSD: $1,850 <— 3rd place
          Mactracker 7841 system benchmark plus HD 4000 graphics
          4.5 lbs. 7 hours of battery life
          8% faster CPU performance on Mactracker benchmarks
          compared to the MBA
rMBP 2.4 Ghz i5, 8 GB RAM, 256 GB SSD: $1,500. <— 1st place
          Mactracker 7136 system benchmark plus Intel Iris Graphics
          3.5 lbs. 9 hours of battery life
          2% slower CPU performance on Mactracker benchmarks
          compared to the MBA
rMBP 2.4 Ghz i5, 16 GB RAM, 256 GB SSD: $1,700. <— 1st place
          Mactracker 7136 system benchmark plus Intel Iris Graphics
          3.5 lbs. 9 hours of battery life
          2% slower CPU performance on Mactracker benchmarks
          compared to the MBA

Displaying legends on the bar in chart

Hi,
In webi report, can we display the value of the legend directly on the bar instead of displaying it on the x- axis or y-axis
Requirement is highlighted in the attached image.Is it possible in webi reports? Any work around?
Thanks,
Divya

Hi Divya,
Please try following steps to achieve desire output :
1. Right click on chart -> Go to “Format Chart”.
2. In Global Tab > Area Tab > Select “Area Display” > Check the option called “Data Label Displaying Mode” in “Data Values.
3. Next Step > Go to “Data Values” > Set Data type to “Label”.
4. Output:
Regards,
Veer S.

Charts: how do I determine when the mouse is in the plot area

I'm trying to implement logic that will do the following:
Panning plot within plot display area by clicking and dragging mouse
If the user clicks and drags in the chart plot area (the region where the chart plot actually displays, not including the axes, legends, titles, etc.), I want to be able to provide the effect of panning the plot (e.g. similar to grabbing and dragging a map in Google maps) within the plot display. This makes the most sense, of course, if the user has zoomed in to some level and the entire plot is no longer fully visible within the display.
Zooming on a plot
If the user places the mouse somewhere in the chart plot area and uses their mouse wheel, I want to be able to provide the effect of zooming in and out of the plot. The plot area itself must remain at its original size, just the representation of the plot needs to simulate the effect of being zoomed in or out on.
Thoughts, suggestions, ...
To make the zoom and pan effect, my thought was to adjust the axes bounds as appropriate to simulate these effects. The trick for some of what I'm planning on doing is finding out where the mouse is in the plot area (not the whole chart) so that I can find the x,y offsets from the plot origin (which appears to be in the upper left - at the chart level anyway). For panning, I don't think I care what the offset is, just that it's within the plot. For zooming, I may need to know where the mouse is in the plot so that the zooming could be centered on that location in the plot. This makes me think that it would also be helpful to find out how to translate the mouse x,y pixel position to a corresponding x,y value in the plot data domain.
I've been experimenting with attaching event handlers to detect various mouse actions and what information can be gleaned from these events. So far I have not found anything that allows me to determine the bounds of the plot region in the overall chart. I can get the mouse x,y position, but I don't know where it is in relation to the plot area bounds. I don't want to initiate a pan of a plot if the user happens to drag their mouse somewhere outside the plot area (i.e. over an axis, legend, etc.). Also, it would not make sense to start a zoom on the chart unless the mouse is over the plot.
Please let me know if this seems to be a reasonable approach, and if not, please suggest any ideas for alternatives. Any help, ideas and suggestions regarding how to solve these issues and/or determine this information would be welcome.

I experimented a bit and it seems the plot-content is the Group containing, well, the content of the plot. So in a line chart it's the smallest rectangle containing all the lines and the graphic at the data point (little circles, by default). What you probably need instead is the chart-plot-background.
Here's a quick example of a panning chart. There are probably better ways to manage the mouse dragging (it behaves somewhat badly if you drag out of the plot area and then back in, for example) but it gives you the basic idea. My original idea of adding a mouse directly to the plot area failed as the event doesn't get propagated to the plot region if you click on part of the plot content (a line, for example).
import java.util.Random;
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart.Data;
import javafx.scene.chart.XYChart.Series;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.Region;
import javafx.stage.Stage;
public class PanningChart extends Application {
@Override
public void start(Stage primaryStage) {
    final NumberAxis xaxis = new NumberAxis("x", 0, 10, 1);
    final NumberAxis yaxis = new NumberAxis("y", 0, 100, 10);
    final LineChart<Number, Number> chart = new LineChart<>(xaxis, yaxis);
    chart.setAnimated(false);
    chart.setData(createData());
    final Region plotArea = (Region) chart.lookup(".chart-plot-background");
    final DoubleProperty lastMouseX = new SimpleDoubleProperty();
    final DoubleProperty lastMouseY = new SimpleDoubleProperty();
    chart.setOnMousePressed(new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        final double x = event.getX();
        final double y = event.getY();
        if (plotArea.getBoundsInParent().contains(new Point2D(x, y))) {
          lastMouseX.set(x);
          lastMouseY.set(y);
    chart.setOnMouseDragged(new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        final double x = event.getX();
        final double y = event.getY();
        if (plotArea.getBoundsInParent().contains(new Point2D(x, y))) {
          moveAxis(xaxis, x, lastMouseX);
          moveAxis(yaxis, y, lastMouseY);
    final BorderPane root = new BorderPane();
    root.setCenter(chart);
    primaryStage.setScene(new Scene(root, 600, 400));
    primaryStage.show();
private void moveAxis(NumberAxis axis, double mouseLocation,
      DoubleProperty lastMouseLocation) {
    double scale = axis.getScale();
    double delta = (mouseLocation - lastMouseLocation.get()) / scale;
    axis.setLowerBound(axis.getLowerBound() - delta);
    axis.setUpperBound(axis.getUpperBound() - delta);
    lastMouseLocation.set(mouseLocation);
private ObservableList<Series<Number, Number>> createData() {
    final ObservableList<Data<Number, Number>> data = FXCollections
        .observableArrayList();
    final Random rng = new Random();
    for (int x = 0; x <= 10; x++) {
      data.add(new Data<Number, Number>(x, rng.nextDouble() * 100));
    return FXCollections.singletonObservableList(new Series<Number, Number>(data));
public static void main(String[] args) {
    launch(args);
998038 wrote:On a slightly different (but related) subject, where can I find an up-to-date source of information that describes the IDs and class names that JavaFX uses? I assume the ".plot-content" is pertaining to the ID of the chart plot area (or plot "child" of the chart?). Where can I find the names of the various objects that can be "looked up"?I generally try to avoid lookups as they feel a bit fragile. However occasionally there seems to be no other way, as in this case. The [url http://docs.oracle.com/javafx/2/api/javafx/scene/doc-files/cssref.html]CSS reference guide documents the css class substructure of each Node type.

Add chart series on demand

Hi all,
I'm running Apex 4.2.1
I have requirement to create a chart where at the top I'll have a list of departments, every time a user click on a Department a new series should be added to the chart with information about that department.
Can that be done in Apex?
Thank you,
Edited by: gsirvas on Feb 25, 2013 1:33 PM

So how do you add departments? Are they store in a table? If so then you could have a method for the user to select the required departments, and build your query for your chart as a function returning query. In the function you can determine what departments have been selected..
here is a blog with an example: http://ruepprich.wordpress.com/2011/03/31/apex-4-charts-dynamically-adding-a-series-2/
Thank you,
Tony Miller
Ruckersville, VA

Need EXPERT's suggestion for APEX CHART SERIES

Hello Everyone,
I have been trying to solve an issue with my apex line chart. The scenario is as follows:
I have a table called revenue. revenues per year are saved in it. and revenues are generated from three sources which are also saved in the same table.
I have made a line chart on it. works well.
Now I have to show that if the value of one of the sources had fallen, how must have it affected the total. I made a number field that takes an estimated change value, and build my sql query with it. it works but the problem is that it changes the non-affected source too. it must change the value of the affected source only and hence the total value.
I hope I make sense and anybody can suggest something.
bold or I will put it this way, how can I write a select statement for a chart series so that one of the rows value does not change and the other two change. ... ?
Edited by: Samooray92 on May 30, 2013 2:41 PM

Samooray,
Let's work with this question since there is more detail here than in the other one. {thread:id=2543702}
First it's always help to know:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
And sometimes this information as well.
Theme
Template(s)
Region/item type(s)
When a question goes unanswered for a while, there is no need to reply to it or to start a new question. You can edit the original question and just add "Bump" at the bottom and save the changes. This will bump it back to the top of the question list. And by that time, you might think of additional information you can add to the question.
Say, why would a question go unanswered? Well, easy questions and frequently asked questions with well-known answers can be answered right away. Your question seems more complicated and I don't think we have all the information we need to understand exactly what the question is.
You are doing a "series" chart. What kind of series chart: bar, column, line? What is each series? For example, components of revenue might be 1) sales, 2) licensing revenue and 3) other. Then you might have one series for sales, a second for licensing revenue and a third for other.
Could you mock up a trivial example on apex.oracle.com http://apex.oracle.com/pls/apex/f?p=4700:1:0::::: ?
Regards,
Howard

Single Chart Series with multiple color data points

I am developing an application using the flex chart component
and I am binding data to 3 different chart series which is pretty
intense processing. I was wondering can I use only one chart series
and when I bind the data points just to change the color per data
point which meet certain criteria?
Here one method from my application where I am dynamically
binding data to my series.
private function loadSeries(data:XMLList, yAxis:String):void
seriesAdd.yField = yAxis;
seriesAdd.xField = "Date";
//seriesDelete.yField = yAxis;
//seriesDelete.xField = "Date";
//seriesChange.yField = yAxis;
//seriesChange.xField = "Date";
seriesAdd.dataProvider = data.Trade.(A == 'Add');
seriesAdd.//Can I change the color per each data point if I
have multiple data sets?
//seriesDelete.dataProvider = data.Trade.(A == 'Delete');
//seriesChange.dataProvider = data.Trade.(A == 'Change');
Thank you

I think I found something to get me started:
http://livedocs.adobe.com/flex/3/html/help.html?content=charts_displayingdata_09.html
My next question is if I have the following function to fill
my data points:\
private function myFillFunction(element:ChartItem,
index:Number):IFill {
var c:SolidColor = new SolidColor(0x00CC00);
var item:ColumnSeriesItem = ColumnSeriesItem(element);
var sales:Number = Number(item.yValue);
if (sales >= 50000) {
return c;
} else {
// They have not met their goal.
c.color = 0xFF0000;
return c;
How can I access values that pertain to the specific chart
item, but are not plotted on the x and y axis. Something similar to
the checking on the above function, but check if value that is not
plotted but still exists on the data provider.
Thanks in advance.

Change color in chart series (Chart Controls)?

Does anyone know if it's possible to change the color within a series in Microsoft Chart Controls? My data is X = test time and Y = response time using a column graph. Currently when the test to collect response time fails it does not
record a numerical value and when graphed it appears as though the response time was minimal. I want to make it stand out when a failure occurs, for example to draw a large column and change the color to red (other values are in blue).
I don't have much experience using Chart Controls yet. I know you can use an alternate color with a different series of data but it doesn't appear you can change it from within.
This is my chart series (when a test fails, the response matches "" and not $NULL):
[void]$chart1.Series.Add("ResponseTime")
$chart1.Series["ResponseTime"].ChartType = "Line"
$chart1.Series["ResponseTime"].BorderWidth = 1
$chart1.Series["ResponseTime"].IsVisibleInLegend = $true
$chart1.Series["ResponseTime"].chartarea = "ChartArea1"
$chart1.Series["ResponseTime"].color = "#0404B4"
$DATA | ForEach-Object {
If ($_.RESPONSE_MS -eq "") {
$chart1.Series["ResponseTime"].Points.addxy("FAIL",9999)
Else {
$chart1.Series["ResponseTime"].Points.addxy( $_.TIME.Remove(5) , ($_.RESPONSE_MS)) }
I tried changing the color within the if/else but the first .color value it picks up will be used throughout.

Hi Tickermcse76,
To create a new line chart, please refer to this script:
function New-Chart
param ([int]$width,[int]$height,[int]$left,[int]$top,$chartTitle)
# create chart object
$global:Chart = New-object System.Windows.Forms.DataVisualization.Charting.Chart
$global:Chart.Width = $width
$global:Chart.Height = $height
$global:Chart.Left = $left
$global:Chart.Top = $top
# create a chartarea to draw on and add to chart
$chartArea = New-Object System.Windows.Forms.DataVisualization.Charting.ChartArea
$global:chart.ChartAreas.Add($chartArea)
[void]$global:Chart.Titles.Add($chartTitle)
# change chart area colour
$global:Chart.BackColor = [System.Drawing.Color]::Transparent
} #New-Chart
New-Chart -width $width -height $height -left $left -top $top -chartTile $chartTitle
[void]$global:Chart.Series.Add("Data")
# $global:Chart.Series["Data"].Points.AddXY($(get-date), $($ht.Values))
$global:Chart.Series["Data"].Points.DataBindXY($ht.Keys,$ht.Values)
#$global:Chart.Series["Data"].XValueType = [System.Windows.Forms.DataVisualization.Charting.ChartValueType]::Time
#$global:Chart.chartAreas[0].AxisX.LabelStyle.Format = "hh:mm:ss"
#$global:Chart.chartAreas[0].AxisX.LabelStyle.Interval = 1
#$global:Chart.chartAreas[0].AxisX.LabelStyle.IntervalType = [System.Windows.Forms.DataVisualization.Charting.DateTimeIntervalType]::Seconds
$global:Chart.Series["Data"].ChartType = [System.Windows.Forms.DataVisualization.Charting.SeriesChartType]::Line
#$global:chart.Series["Data"].IsValueShownAsLabel = $false
Reference from:
http://poshcode.org/1205
To change the chart color, please refer to this script:
Charting with PowerShell
I hope this helps.

Dynamic Chart Series (or equivalent)

Hi Folks.
I am looking to dynamically create chart series queries at runtime.
The data that I am presenting in my chart is stored in APEX collections populated at runtime. The series I need to generate at runtime will effectively pivot the data stored in the collections using the sequence number as the key.
For example, if my page generates two collections at runtime like this...
collection1
Sequence C001 C002 C003
    1    AAA 200 300
    2    AAA 300 400
    3    AAA 400 500
collection2
Sequence C001 C002 C003
    1    BBB 500 600
    2    BBB 600 700
    3    BBB 700 800I would need three series to be generated.
The first series would pick up the C001, C002 & C003 from both collections for sequence 1
The second series for sequence 2
The third series for sequence 3.
Does anyone have an opinion on how I could achieve this dynamically? Some pages may need 10 series, some only two.
Any suggestions appreciated.
Many thanks
Kind regards
Simon Gadd

Simon,
I think this can help:
http://apex.oracle.com/pls/otn/f?p=31517:222
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Date Axis Line/bar Chart not working properly when rendering through SDK

Hi all,
When i render a existing Crystal report 2011 through java SDK code(Eclipse) bar chart is working fine, But the Date Axis line chart is not displaying properly. the properties are getting changed.. Any clue how to handle this? Do we have particular jar for Chart?
Thanks in Advance!
Regards,
Mirthu

Hi Mirthu
I moved your post to the SAP Crystal Reports, version for Eclipse SCN Space. Unfortunately, all I know about Java is that it's in the cup in front of me . But I will get someone to have a look that should be able to help you ASAP.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Making the x-axis intersect y-axis at zero

Hi,
I think this is probably a simple question but couldn't find it answered anywhere. Basically I have some data I want to plot on a graph which has some of the 'y values' as negative. I have tried to make a scatter chart which works, but it puts the x-axis at the bottom, rather than it still intersecting the y-axis at zero which is what I want. Seems like it should be simple as I guess this is a common request but I couldn't work out how to do it.
Thanks in advance,
Pierce

The closest I've been able to come is to not show the X-axis, show Y-axis grid lines, then choose 1 step for the Y-axis increments. The X-scale still remains at the bottom of the chart, though.

Chart series should display center of the x-axis lines

Similar Messages

Maybe you are looking for