Chase Bank download difficulties resulting in a blank screen

Tonight I have had a problem with Chase Bank giving me a blank screen when I tried to download my credit card statement. The file Chase downloaded was always 'statementPdf' (with a total of 6 downloads) and windows always stated that it had no program to open this file. I read another Firefox posting that had the same problem. I was trying to get back to that posting to add my temporary solution which works with Foxit: I just went to a DOS command line and used the old DOS rename command. By renaming it 'statement.pdf', I could open the file. This does not explain why Chase is consistently downloading a mis-named file. I first tried calling Chase but got a girl on their tech desk, apparently from India who was not very much help.

Thank you for contacting Chase.
We apologize for any inconvenience this issue may have
caused.
We have been receiving calls and e-mails regarding a blank
screen while trying to access statements online. This is
currently a known issue and our technical department is
working on a solution. We appreciate your patience and
understanding.
If you have any questions or require further assistance,
please e-mail us via the Secure Message Center or contact
our Internet Service Center at 1-877-242-7372.
Thank you,
Erika R Miciano
Internet Service Center
This was my reply from Chase. I have not received any other communication. At least they appear to have received word from others re the problem. Thanks for your recommendation to contact them directly. Bob

Similar Messages

  • When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?

    When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
    I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.

    Thanks so much for your reply fanboy20. 
    Yes, just made sure of that.  I do have the latest version of Flash player.  But I have just staggered upon the answer.  Chalk it up to being a newbi.  I was not putting my apple tv to sleep and it would not allow me to see
    you tube on my computer while it was still operating on my TV.  When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine.   Thanks again for your response.

  • Is anyone else having a problem using "search" in the store. Everything else seems find but selected search results produce a blank screen.

    Every time I try to use 'search' in iTunes, it will bring up available related results, but when you click one the results screen is blank. Plus I'm continuing to notice since downloading iOS 6 this phone seems a little glitchey and slow at times

    Same here. Searching iTunes Store and touching a result often results in blank screen. Hopeless isn't it. Can't select and download a film because of it. Stuff in the featured/category/chart sections selects ok, it's just searched items for me. Surely others have noticed same with ios6. This only happens on my iPhone 4. On iPad 3 search is fine but I think it's different because iPad 3 tends to bring a kind of pop out window when selecting.

  • Safari will not open PDF files. Attempts to do so result in a Blank screen.

    Safari will no longer open PDF fies.
    Attempts to open a PDF file from SAFARI resut in a Blank screen.
    Firefox and Chrome open such files.
    Any solutions?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • Updated mac book from 10.4 to 10.6, downloaded updates, now just have blank screen

    Updated Mac Book (intel) from 10.4 to 10.6.3 using Mac Box set.  This worked.  Downloaded software updates from "software update", installation failed, restarted computer and now have only the 1st white screen with the wheel going round - cant do anything!

    You could try some basic troubleshooting, and if that doesn't work, you could always do a complete uninstall / reinstall.
    For basic troubleshooting, try throwing out *all* GB preference files from the preference folder. Also, I'd try tossing any GB files in the cache folder. Then, rebuild disk permissions using disk utility.

  • HT204266 Download to update all apps, but I see blank screen?

    I have five updates on iPad to download, but I see a blank screen. I could not update them.  How do I fix this?

    If you are getting the blank app update screen, many people are having this problem over the last couple of days.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    Only Apple can fix it now.

  • How to correctly load an external swf file into iosAir app? I'm getting blank screen.

    So this code works flawlesly on Air for Android, it even works fine when I test the movie in Flash, but once I export it, I'm getting a blank screen. I made an swf with a square and withotu any code, and flash still fails to load it. It's weird cause everything works fine when I use the interpreter debugging option, but when I switch to standard debugging the blank screen appears on my ipad. I've read somewhere that it's caused by the way flash saves the link to external files. Thus after the file is compiled Flash fails to find the prefiously added files, which results in a blank screen. There's clearly something wrong with how the process of compiling the application.
    Tried this:
    var Xpos:Number = 0;
    var Ypos:Number = 0;
    var loader:Loader = new Loader();
    var link:URLRequest = new URLRequest("Untitled-1.swf");
    loader.load(link);
    addChild(loader);
    And this:
    var ldr:Loader = new Loader();
    ldr.load(new URLRequest("Untitled-1.swf"));
    ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, loaded, false, 0, true);
    function loaded(event:Event):void {
    addChild(event.target.content);
    But nothing works. I'm still getting a blank screen. Is there any way to add the swf file manually into the descriptor file cause flash most likely messes it up? I don't really want to use through command line.

    Read this article, especially the bit about loadercontext and currentdomain:
    http://blogs.adobe.com/airodynamics/2012/11/09/packaging-and-loading-multiple-swfs-in-air- apps-on-ios/

  • Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!

    I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal is digital or analog. This dialog box is on for a few seconds and then the monitor goes to sleep. The monitor realizes that there is a signal coming in; As soon as I disconnect the DVI cable I get the standard "Check Signal Cable" on the monitor's screen. I don't even get the initial white screen on the Mac boot up. nothing. just the monitor's confused signal identifying dialog.
    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable and a DVI to VGA to DVI connection, with the same result.
    I've also tried the monitor with an older PowerPC based Mac mini with the same result.
    Both Macmini's work with out a problem when connected to my 32" LCD TV with a DVI to HDMI cable.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm; I think that fact has been the most painful part of the process up to now.
    The windows machine's screen set up that worked was 1280x800 at 40Hz. I can't get a resolution like that on the Mac's display settings. I've only been able to hook it up to the LCD TV, and the display settings when hooked up to the TV are limited to LCD TV settings; i.e. 1080i. I've also tried setting the mac mini to 800x600 but still get no picture.
    Resetting PRAM etc. didn't help either.
    I'm stuck... any ideas people?

    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable...
    That should work.
    and a DVI to VGA to DVI connection...
    That won't work. Once you go from DVI to VGA from the mini, you need to stay VGA. There is no going back to digital. So try DVI to VGA and then a VGA cable to the Samsung.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm;...The windows machine's screen set up that worked was 1280x800 at 40Hz.
    I wouldn't call that working like a charm. 1280 x 800 at 40Hz is a completely bizarre resolution for a 23" monitor, or any monitor. I would begin wondering if you got a bad monitor if that's the best it can do.

  • CertView Authentication - blank screen

    After sitting an exam today I received an email from Oracle saying my results are ready. I clicked the link in the email, logged into my Oracle account and was presented with a screen asking me to Authenticate CertView.
    Pressing the "Authenticate Now" button results in a blank screen. I did not receive an error message. Just a blank screen. The result is the same on IE and Chrome.
    I double checked that my oracle testing ID and email are correct. The details are correct. My PearsonVue account was created months ago.
    Right now I don't know whether I've passed or failed, which royally sucks.
    Recent posts on https://www.facebook.com/OracleCertification show that I'm not the only one suffering from this problem.
    Any ideas?

                Hi am also having the same problem I took exam two days back, Facing same empty page while Authenticating.Oracle is hurting us lot,
    My Manager wants to check my Score but Oracle sucks in the name of Security.I took OCWCD exam.
                If you have any improvements please inform me to [email protected]

  • SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

    Hello-
    I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
    When I Select the site that I want to download the test result file for, The results pane shows the following error:
    "The share does not seem to be configured in the Alert Attachment Management Pack"
    When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
    the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
    My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
    to.
    My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

    Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

  • Chase Banking app not supported on Windows Phone

    I used to check my bank account on my Nokia Lumia 925 smartphone, but it is no longer available. I asked at my local Chase Bank and was told that Microsoft no longer wanted to support this app. This is a major inconvenience for me, enough for me to consider
    getting rid of my phone and getting an Android or Apple phone instead.
    TwidaleM

    Hi,
    Probably you have to try with Sencha support as well.
    As you mentioned two of your apps are working, problem must be with the APIs which you used on third platform.
    Generally, your app should work on WP8.1 also with out changes. But it is difficult to analyze the problem with out knowing what you have written.
    -Malleswar

  • Quiz results page appears blank

    I have built a module consisting of 122 slides and is 10.8mb in filesize.
    Everything appears fine and work perfectly my end however when I have sent it out for review the past couple of times, my colleauge revewing it can see "a blank screen after the quiz so I eventually had to close the module to exit. In addition I've noticed that when you submit some of the first aid quiz questions a yellow appears around the text at the bottom of the screen."
    Can anyone shed some light onto this please?

    Uploading files so that other people can download them is often the cause of playback issues because people don't always download all the required files for a Captivate movie to work.  Also, people often just double click a zip archive and try to launch the HTM file, not realising that playing something from within an archive is not the same as unzipping the entire package to a folder and THEN playing the same HTM.
    For more consistent testing results, I encourage you to gain access to a web server where you can place your files and then just send people a link to the HTM file on that server via http://mycourselocation.mycourse.htm or similar.  That way, they just get access to the file required to launch all the others and you can eliminate many of the silly little issues that people fall into.

  • I downloaded Firefox to my PC and olny get a blank screen when I click on the Icon, Why?

    I only had Internet Explorer on this new( to me) PC and wanted to download FireFox. I downloaded it to my PC and when I click on the Firefox Icon, all I get is a blank screen with a small menu bar at the top left. I DO NOT get the icons that show on the sample input screen at the top right. All I get is the History icon which does nothing when I press it. I deleted the Firefox app from my PC and downloaded it a second time and it does the same thing. My son gave me this used PC, but it did NOT have firefox on it. What do I do now?

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    Its possible the App is not available in the Canadian store if the link doesn't work for you.
    https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

  • Just downloaded 10.5.  It gives me a blank screen for the itunes store.  No error message.  Internet connection fine.  Have checked firewall.  Any ideas?

    I have just downloaded 10.5.  it gives me a blank screen for the itunes store.  No error message.  Internet connection fine and I have checked my firewall settings.  Any ideas?  Or is the store blocked because of ios 5 release today?

    I've had the exact same issue since late last night since I downloaded 10.5
    I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
    I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
    I will try japiohelp's solution and see if that does anything.

Maybe you are looking for