SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

Similar Messages

Visual Studio Ultimate is required to execute test.

I'm trying to run a Load Test using VS2013 Ultimate but VS keeps telling me I'm not :) Snip is attached. I try to run a fairly simple Load Test, GET call against a single web page. Using Constant Load, 5 users, 20 iterations. The individual
Web Test runs fine. I'm running from my dev box so Admin, Controller and Agent all on same machine. Machine is Windows Server 2012 R2
Exact error is "Visual Studio Ultimate is required to execute test."
I'm signed in, my profile looks right and my subscriptions are good. What am I missing? Whats going on here?

Hi rlakin，
Thanks for your posting in the MSDN forum.
As you said that the Test Controller and Agent are in the same machine, I think you run your load test with them, am I right? If so, how about run your test locally wihtout using the Test Controller and Test Agent. For example, just disable the
.testsettings file, run it again.
If it still has this issue, how about running it in other VS machine? If the same test works well in other VS, I doubt that it is your VS IDE issue.
In addition, Where did you get this VS2013 version? Maybe you could re-download it from the official site, test it again.
http://www.visualstudio.com/downloads/download-visual-studio-vs
If possible, please also install the VS2013 update 4.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Visual studio web express 2013 with update 4 downloading stuck

I am downloading Visual studio web express 2013 with update 4 and when acquiring KB2829760 it stuck. Then prompts that "Unable to locate package source".Please give your kind attention as this is highly important to fix and install.

Hi,
You could try downloading ISO file for visual studio express 2013 for web with update 4.
http://www.visualstudio.com/downloads/download-visual-studio-vs
Before install, please try verify the supplied DVD ISO checksum use this tool
http://support.microsoft.com/kb/841290/en-us It will tell us the ISO's checksum number, you can use it to compare with the one listed on download page.
If the errors also occur, please use http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here. I will help you check your installation logs to know the reason of your issue.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

SCOM 2012 Sp1 Cu4 Web Console issue logging

Hi I am having an Issue with the SCOM 2012 sp1 Cu4 Web console,
When logon to the web console its Says Singing IN,
And the loops on Initializing....
after a while I get this error,
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
System.TimeoutException: [HttpRequestTimedOutWithoutDetail]
Arguments:
http://localhost/OperationsManager/Services/DataAccessService.svc
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem.
See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.ServiceModel.dll&Key=HttpRequestTimedOutWithoutDetail ---> System.Net.WebException ---> System.Net.WebException
   at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
   --- End of inner exception stack trace ---
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String methodName, Object[] args, IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result)
   at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)
I found that the only way to fix it previously was to completely remove IIS from the server and reinstall everything connecting to the Web Console, so far its not the best way to go as I keep getting this error after 2 days,
Can anyone tell me how I would even go about diagnosing this?
Kind Regards

Got the same issue again with Update Release 2 for R2,
then found this blog, but it did not help me, only guided me in a direction
http://thoughtsonopsmgr.blogspot.com/2013/12/quick-fix-register-aspnet-40-with-iis.html
What help me was to re-add the svc-integrated-4.0 by copying and pasting the info it, same with the ScriptModule-4.0.
Don't know why that worked for me but this is a funny issue,
I also don't recommend doing this, as it only worked for me.

Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

"cannot retrieve download information please connect to itunes" ? problem,

what does "cannot retrieve download information please connect to itunes" mean?
lately, my ipod has been acting weird, about 3 days ago, it wasn't able to access the 'Updates" section of the mobile store. Now it can, so I downloaded the Tap Tap update, it tells me to go hook it up to my computer and now this message pops up on my ipod every 5 min.

I had this same problem with the message cannot retrieve download information please connect to itunes. Everything else on the ipod works fine, but you might notice that the ipod is displaying the wrong time, or the time keeps changing. the time thing sometimes occures with this problem just something esle I noticed wrong. The good news is that the problem is not with the ipod or your connection, It is a problem with Itunes, if your computer hibernates while itunes is open and you wake it up and plug your ipod in it screws up stuff with the itunes store and also messes with your time, to solve this problem all you need to do is to is to close itunes, reopen it plug your ipod in and hit sync. pluging your ipod into your computer after it has hibernated and itunes was open causes this problem, so just always restart Itunes before you plug in your ipod after hibernating. hope this helps

Song cannot be downloaded because it was not purchased with your Apple ID.

The song that I tried to buy is not on my computer, it is in the list of purchased songs to download, but I get this error message when I try to download it to my computer. My computer has been authorized for iTunes purchases- so that is not the issue. It is an issue with iCloud that needs to be fixed.
My first experience with re-downloading purchased music involved missing titles- which were not in my list to download.
I contacted Apple- and they gave me the ability to download it.
Now, things that were not available before are available now. Some of them download, some of them present you with the error message above.
This system is not quite ready, it seems.

Just to add, it seems as though this happens in a strange circumstance (at least for me and one other user that I've encountered thus far).
Individual songs seem to download fine, but for albums I have purchased that I have not yet downloaded to my PC (for example, purchased on my iPad), iTunes keeps telling me 'SONG XXX' cannot be downloaded because it was not purchased with (my) Apple ID. This is technically a valid messge - I didnt' buy song xxx, I bought Album XXX... but it also happens when I click on the cloud below the album itself.

Error states: "Song title" cannot be downloaded becuase it was not purchased with your apple ID, when in fact it was!! What is going on?

Hello I am trying to use the "Download Perviously Purchased" feature on iTunes. When I go to download the songs that are not in my library that I downloaded on a different computer with my same apple ID is states ""Song title" cannot be downloaded becuase it was not purchased with your apple ID"
I did purchase it with my exact apple ID and it even asked to make sure that my account info was correct which it was. How do i solve this problem??

There are a lot of reports of people having this problem (including me). The Apple iTunes store has been having other issues as well (some speculate it might be related to the recent Lion release).
You could open a case with Apple, or you could just wait it out. I'm sure Apple is in the process of fixing it since this seems to be hitting a lot of users.

Hidden, Dynamic parameters in Visual Studio web test - debugging

Hello! I am trying to debug a web test in Visual Studio and I'm running into the issue of incorrectly bound dynamic parameters.
Here is the error I am getting:
Request failed: Context parameter '$HIDDEN1.j_id71:_link_hidden_' not found in test context
I have looked at many blogs and websites that tell you how to fix this bug. (http://blogs.msdn.com/b/edglas/archive/2010/03/24/web-test-authoring-and-debugging-techniques-for-visual-studio-2010.aspx) However the websites haven't helped, my error is slightly
different from the one they outline.
This website in particular tells me how to find the place where the parameter is defined earlier in the code, but in my case this parameter never seems to have been defined. I can't figure out what extraction rule to use (if any).
Let me know if you have any suggestions/useful websites I can look at! Also let me know if you need more information. Thanks in advance!
-Danielle

Hello Jack,
Thank you for your detailed response. I had already gone through the first blog you recommended to no avail, but the second one seems to be leading me more in the right direction.
I have a few more questions for you after looking through this advice.
I added a validation rule like that second blog (http://blogs.msdn.com/b/slumley/archive/2007/11/19/debugging-errors-in-load-test.aspx) says to, and I am seeing that my form parameter "j_id71:_link_hidden_" doesn't exist.
However, I noticed when I right clicked on this parameter name in Response tab of the request that is failing, and selected "Quick Find", it searched for the value that the parameter has been assigned. It found this value in a QueryString parameter
named "_" in the previous request.
After studying my web test, I noticed also that this variable "_" is in many QueryStrings, and it always seems to match these hidden parameters that are not being found in the test context. I believe this query string parameter is the main source
of my issue.
The validation rule I added from that blog post is trying to validate the existence of a Form Post Parameter, however the value I want to extract is in a QueryString parameter. Is there a way to extract a value from Query Strings? I only have found ways
to extract from Form Post Parameters.
What do you recommend? Here are some things I've tried that have failed:
1. I tried renaming the parameter "_" to match the hidden one, that didn't work.
2. I tried creating a new Form Post parameter that matched the Query String parameter in name and value. Furthermore, I tried to use the Validation FormFieldExists rule from the blog to validate that the Form Post Parameter "_" exists, and that
failed. Why isn't it seeing the form field I create?
3. I tried to set the value of j_id71:_link_hidden_ Form Post Parameter in the failing request to {{_}}, so that it finds the value from the correct variable. This didn't work either.
Any other options you can suggest? I know this is a lot of information, I figured the deeper context may help you to help me debug this issue. Thanks again!!
-Danielle
[UPDATE] -- I tried to validate existence of a form post parameter that is obviously there and was there from the beginning, that also failed. Maybe a bug in the validation rule code...
[UPDATE 2] -- I have started to solve my issues by changing the value of these Form Post Parameters to certain QueryStringParam values. By looking in the Properties panel when I've selected a form post parameter that wasn't working, I can change the value
to one of these values using the dropdown. The dropdown menu has about 7 different options named "QueryStringParam11810.ct", for ex. Each param has a different number and ending associated with it, and by trial and error I've been finding matching
QueryStringParams to go with each hidden parameter. So far this is working... Not sure how to choose which value matches in a more specific way besides trial and error.
So I guess this is resolved, although if you have an explanation for all of this that would be very appreciated!

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Groupwise.wsdl in Visual Studio Web Developer 2010 Express

Hello,
I'm trying to add a "Service Reference" in VS Web Developer 2010 Express by importing the groupwise.wsdl file.
Everything looks fine when importing the file/adding the reference but when using it several things are missing (e.g. there is no GroupWiseBinding)
I tried with the groupwise.wsdl file of GW 8 and GW 7 SP3.
Should I use another .wsdl file or is this just not supported by VS Web Developer? (it works fine in Visual Studio 2010 Express)
Tx, vha

Originally Posted by vha001
Hello,
I'm trying to add a "Service Reference" in VS Web Developer 2010 Express by importing the groupwise.wsdl file.
Everything looks fine when importing the file/adding the reference but when using it several things are missing (e.g. there is no GroupWiseBinding)
I tried with the groupwise.wsdl file of GW 8 and GW 7 SP3.
Should I use another .wsdl file or is this just not supported by VS Web Developer? (it works fine in Visual Studio 2010 Express)
Tx, vha
Replying to an old thread, but since i walked into this problem myself and google could not not help me, maybe this is usefull for others.
In Visual Studio 2010 (and 2008) you will need to add a Web Reference, not a Service Reference.
This is done by right clicking on References, selecting "Add Service Reference", clicking Advanced, and then "Add Web Reference".
Ray

Query - Cannot Retrieve the Data / Result Set

Hello,
I'm trying to query a cube through the OLAP connection using Java and every time I try to execute a query an exception is thrown stating "Cannot retrieve the data set" or "Cannot retrieve the result set" depending on how I'm doing the query. I've tried to execute the query both through the use of an IBIQuery and IBICommandProcessor object as well as directly through the IBIOlap connection via an MDX statement and both methods produce the same exception. If anyone can shed some light on why exception is being thrown it would be greatly appreciated.

please help me ... The question has nothing to do with 'getting' data from excel and certainly not with putting it into MySQL.
The stack trace specifically tells you that your connection string is wrong.
It also tells you which connection string is wrong.
Which you can use to determine specifically which one is wrong. And which you did not provide that info to us.

DSGETDCNAME advertising test failing. SYSVOL and NETLOGON shares not replicating. Please help!!!

Hello all. We are currently running a Windows Server 2003 ADDC as a virtual machine on a Windows Server 2012 host using Hyper-V. We have recently added a second Windows Server 2012 ADDC also as a Hyper-V VM. I promoted the 2k12 to a DC, transferred all FMOS
roles, and tested AD replication. All AD data was replicated fine. However a DCDIAG (the results of which I have attached to this post) show a few errors.
First off, it is failing the advertising test. This is more than likely due to a DNS error. Unfortunately, I can not seem to find the error within the DNS to resolve it.
Secondly, it is failing the KccEvent test; also seeming as a DNS related error.
Thirdly, both SYSVOL and NETLOGON shares were not successfully replicated. This is likely the basis for the other issues. Without these successfully replicated, I can not demote the 2K3 server; which is the goal in the end, to replace the old server with
the new.
I am willing to try just about anything, so any suggestions would be greatly appreciated. As for what I have tried, I have tried a non-authoritative restore using burr flags with no success. I CAN ping both DCs from each other ensuring connectivity. All
users can currently log on to the server (due to the fact that the 2K3 server is still running and still holds the SYSVOL and NETLOGON shares).
Once again, any help would be greatly appreciated! Thank you in advance!
DCDIAG Output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RETIRED2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\RETIRED2012
Starting test: Connectivity
......................... RETIRED2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site\RETIRED2012
Starting test: Advertising
Warning: DsGetDcName returned information for
\\retired1.RetireFirst.local, when we were trying to reach
RETIRED2012.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... RETIRED2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RETIRED2012 passed test FrsEvent
Starting test: DFSREvent
......................... RETIRED2012 passed test DFSREvent
Starting test: SysVolCheck
......................... RETIRED2012 passed test SysVolCheck
Starting test: KccEvent
An error event occurred. EventID: 0xC0000827
Time Generated: 08/09/2013 22:08:34
Event String:
Active Directory Domain Services could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory Domain Services from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.
A warning event occurred. EventID: 0x80000677
Time Generated: 08/09/2013 22:10:02
Event String:
Active Directory Domain Services attempted to communicate with the following global catalog and the attempts were unsuccessful.
An error event occurred. EventID: 0xC0000466
Time Generated: 08/09/2013 22:10:06
Event String:
Active Directory Domain Services was unable to establish a connection with the global catalog.
......................... RETIRED2012 failed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RETIRED2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RETIRED2012 passed test MachineAccount
Starting test: NCSecDesc
......................... RETIRED2012 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\RETIRED2012\netlogon)
[RETIRED2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... RETIRED2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... RETIRED2012 passed test ObjectsReplicated
Starting test: Replications
......................... RETIRED2012 passed test Replications
Starting test: RidManager
......................... RETIRED2012 passed test RidManager
Starting test: Services
......................... RETIRED2012 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:06:48
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:06:49
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site._sites.dc._msdcs.RetireFirst.local. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x00001696
Time Generated: 08/09/2013 22:07:44
Event String:
Dynamic registration or deregistration of one or more DNS records failed with the following error:
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:07:51
Event String:
Name resolution for the name retired1.RetireFirst.local timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:08:23
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:08:35
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
An error event occurred. EventID: 0x0000041E
Time Generated: 08/09/2013 22:08:45
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000423
Time Generated: 08/09/2013 22:08:53
Event String:
The DHCP service failed to see a directory server for authorization.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:04
Event String:
Name resolution for the name isatap timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:08
Event String:
Name resolution for the name e45ad288-70ff-4d9e-adf9-3035e459e126._msdcs.RetireFirst.local timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:21
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site._sites.dc._msdcs.RetireFirst.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x00000423
Time Generated: 08/09/2013 22:11:14
Event String:
The DHCP service failed to see a directory server for authorization.
An error event occurred. EventID: 0x0000041E
Time Generated: 08/09/2013 22:13:45
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... RETIRED2012 failed test SystemLog
Starting test: VerifyReferences
......................... RETIRED2012 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : RetireFirst
Starting test: CheckSDRefDom
......................... RetireFirst passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... RetireFirst passed test CrossRefValidation
Running enterprise tests on : RetireFirst.local
Starting test: LocatorCheck
......................... RetireFirst.local passed test LocatorCheck
Starting test: Intersite
......................... RetireFirst.local passed test Intersite

Thank you for your response first of all! And in response:
1. "Retired1" is the 2k3 ADDC / DNS Server. It currently has a different IP than the 2K12 Server. Verified with ipconfig/all.
2. I set 2K12 to only 2K3 for DNS; no external ISP servers or itself listed. Registered DNS, restarted netlogon; no success.
3. ipconfig/all for 2K12 server here:
Windows IP Configuration
Host Name . . . . . . . . . . . . : RETIRED2012
Primary Dns Suffix . . . . . . . : RetireFirst.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : RetireFirst.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-01-33-0A
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8159:4f0c:4071:d780%12(Preferred)
IPv4 Address. . . . . . . . . . . : 172.21.69.246(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 172.21.69.250
DHCPv6 IAID . . . . . . . . . . . : 251663709
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-74-BE-C0-00-15-5D-01-33-0A
DNS Servers . . . . . . . . . . . : 172.21.69.240
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{8317BEC2-079A-4846-B6B2-1AE3E2784691}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
4. The 2K12 is a GC; yes.
Thanks again and hopefully we can work this out!
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882

I get error message when I try to open PDF's that I have downloaded from the web- document cannot be opened it is either not a supported file type or the file has been damaged. Need help

Is this how I start my new thread?

Thanks.
"Can you right-click, save the pdf file to your desktop (or wherever) then open it using File>Open in Reader?" I tried and was not successful.
I do not know ow to access the PDF viewer of Safari, and BTW the problem may lie in the fact that i have not upgraded from 10.8.5.
And I do not know where the "open with" box might be or if it is a global or app-attached box.

Cannot retrieve download information.. please connect to iTunes.

Getting this after syncing my iPhone after installing iTunes 8.1....
Never had a problem with this before...

I think it's happening to everybody.
I wouldn't recommend doing anything, it seems as if it's Apple's problem
Restoring would be a waste of time..
I haven't updated to 8.1, so it probably isn't related to that.

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Similar Messages

Maybe you are looking for