Check CRM Error Flag of Workflow Condition in own Code Condition
Hi everybody,
I am creating an own condition with the help of a badi.
Can any body tell me how to check if a ticket has an error message like the CRM Error Flag in the Work Flow Condition`?
Regards
Ali
> should I use the statement "EC C1_NOFIRST to remove the error?
you can not really ask this question in this forum. This check gives you hints to the most serious problems in database accesses, if you want to override it, then you should better forget about performance.
If you are not familiar how databases use indexes, then check resources in the net or in books, in
short they use indexes and the indexes are absolutly necessary with large tables, if you want to get
good performance.
But indexes can only be used in the order of their field, until a field is not used in the WHERE-condition, (gap). If the gap is already the first field, then the index can not be used at all.
In your case there is not first field of any index specified in the WHERE condition, so the SELECT might be slow. Either you can add a condition on a first index field or you have to live with a poor performance.
Siegfried
Similar Messages
-
How to check for errors in starting workflow from plsql?
Hi All,
I am using the below code to start a custom workflow.
DECLARE
l_itemtype VARCHAR2(30) := 'XXPWA';
l_itemkey VARCHAR2(30) := '1116410C';
error_code VARCHAR2(2000);
error_msg VARCHAR2(2000);
BEGIN
wf_engine.createprocess(l_itemtype, l_itemkey, 'XX_WEBADI_APPROVAL');
wf_engine.setitemuserkey(itemtype => l_itemtype
,itemkey => l_itemkey
,userkey => 'USERKEY: ' || '1116410C');
wf_engine.setitemowner(itemtype => l_itemtype
,itemkey => l_itemkey
,owner => 'SYSADMIN');
wf_engine.setitemattrnumber(itemtype => l_itemtype
,itemkey => l_itemkey
,aname => 'BATCH_ID'
,avalue => 1116410);
wf_engine.startprocess(l_itemtype, l_itemkey);
EXCEPTION
WHEN OTHERS THEN
error_code := SQLCODE;
error_msg := SQLERRM(SQLCODE);
dbms_output.put_line(error_code||error_msg);
END ;
The script completes successfully without errors.
I am sending a notification from this workflow. I can see the records getting created in tables like WF_NOTIFICATIONS and WF_ITEM_ATTRIBUTE_VALUES. But i cannot see any thing if i query from Status Monitor. Also I am not getting the said notifications. How can i find what is the issue?Hi Manu,
Thanks for sharing the information, If you think of speeding up finding were exactly your notification is struck, You can use the below query (Input parameter would be your notification id), Hope this information is good, I liked this very much, the way it was narrated.
SELECT n.begin_date,
n.status,
n.mail_status,
n.recipient_role,
de.def_enq_time,
de.def_deq_time,
de.def_state,
ou.out_enq_time,
ou.out_deq_time,
ou.out_state
FROM applsys.wf_notifications n,
(SELECT d.enq_time def_enq_time,
d.deq_time def_deq_time,
TO_NUMBER((SELECT VALUE
FROM TABLE(d.user_data.parameter_list)
WHERE NAME = 'NOTIFICATION_ID')) d_notification_id,
msg_state def_state
FROM applsys.aq$wf_deferred d
WHERE d.corr_id = 'APPS:oracle.apps.wf.notification.send') de,
(SELECT o.deq_time out_deq_time,
o.enq_time out_enq_time,
TO_NUMBER((SELECT str_value
FROM TABLE(o.user_data.header.properties)
WHERE NAME = 'NOTIFICATION_ID')) o_notification_id,
msg_state out_state
FROM applsys.aq$wf_notification_out o) ou
WHERE n.notification_id = &NOTIFICATION_ID
AND n.notification_id = de.d_notification_id(+)
AND n.notification_id = ou.o_notification_id(+)
This single query links all together and shows you the current state of the message.
Column 5 & 6 shows the enqueue & dequeue time of WF_DEFFERRED queue.
Column 7 shows the message status in WF_DEFFERRED
Column 8 & 9 shows the enqueue & dequeue time of WF_NOTIFICATIONS_OUT queue.
Column 10 shows the message status in WF_NOTIFICATION_OUT.
Below is the sequence of activities going on between the PL/SQL trigger of the business event and the e-mail received from notification mailer in the tail -end
1. EBS user sends email – To send an email EBS modules use standard API. Email API is implemented in PL/SQL package WF_NOTIFICATION (I will cover it in the next article).
1.1. Provides application data – First of all user’s session inserts business data (recipient, message type, message text etc.) into WF_NOTIFICATIONS table (do not mix up with PL/SQL package mentioned above);
1.2. Defers processing Generates event – a user or process leaves EBS to run further email processing steps. It is done using a Business Events System (BES). Session raises an event k“oracle.apps.wf.notification.send” via the WF_EVENT PL/SQL package (BES processing to be covered in the next articles). Each deferred event is put in one of the two Advanced Queues WF_DEFERRED or WF_JAVA_DEFERRED for further processing. All email sending events go through the WF_DEFERRED queue.
2. Deferred Agent Listener – is a process responsible for ALL BES events processing. It executes all deferred events calling subscriptions’ functions defined for each business event. There are several more things to explain about Agent Listeners and subscription processing (e.g. there are several differed agents, subscriptions groups etc.) This is one more subject for further articles.
2.1. Reads event and starts subscriptions processing – Strictly speaking there is no any enabled subscription for the “oracle.apps.wf.notification.send” event (submitted during the first step). This event is a part of “oracle.apps.wf.notification.send.group” event group. The Deferred Agent executes subscriptions for that group rather than for the stand alone event. At this stage the Agent knows that it should process the notification with given notification id (it is a part of the event data passed via the event).
2.2. Reads application data – in order to generate the email/notification the Agent reads business data from the WF_NOTIFICATIONS table and a few related tables and during the next step builds up the email’s text in XML format.
2.3. Generates data for outbound interface – This is the last step executed by the Deferred Agent Listener. It generates XML representation of email to be sent and together with other important bits of information posts it to the Notification Mailer outbound queue WF_NOTIFICATION_OUT.
3. Notification Mailer – As you see it was a long journey even before we started to talk about the Notification Mailer. There are a lot of things which may go wrong and this is why it is important to know the whole flow of the events to troubleshoot the mail sending functionality in EBS. We’ve come to the last processing step before the message leaves EBS boundaries.
3.1. Reads message – the Notification Mailer dequeues messages fromWF_NOTIFICATION_OUT queue on regular basis. In fact this is the only place where it looks for the new messages to be sent. This means if a notification doesn’t has a corresponding event ready for dequeuing in the WF_NOTIFICATION_OUT queue it will never be send. As soon as a new message arrives Notification Mailer dequeues it and gets prepared for sending;
3.2. Sends email via SMTP – This is the step when the message leaves EBS. The Notification Mailer sends the email using text retrieved from the advanced queue during previous step;
3.3. Updates status – as the last step in the notification sending process the Notification Mailer updates a MAIL_STATUS column in WF_NOTIFICATION table. -
CcBPM - can't activate workflow when using expression in Condition editor
Hi,
My workflow (generated by ccBPM) won't be activated when I try to do an IDOC comparison (on DOCNUM), using an index (count), in the ccBPM Condition Editor.
The condition looks like this:
(msgs_receive[count]./HRTRPR01/IDOC/EDI_DC40/DOCNUM = msg_receive./HRTRPR01/IDOC/EDI_DC40/DOCNUM)
There seem to be no errors when activating the Integration Process in the Integration Repository, however when looking into the SXI_CACHE, XI Directory cache, my integration process gets return code '99', even after reactivation.
I get this error:
Syntax error in expression Line1 Ext. IDE63443806B4211DBC393F1DE0ACE61FE
The exception occurred (program: CL_SAI_SWF_RULE
Symbol 'CE/KO' expected at position 1 in expression 'count{XSDSIMPLE::xsd:string;}'
The only interpretation I make out of this is that it doesn't like my index (count) variable.
Can anything be done to fix this?
I use XI 3.0 SP14
Thanks
Olof TrönnbergHi,
Return code - 99
1) Export parameter might be wrong.
2) Check Oss Notes 901366 & 708338.
3) 99 occurs when there is a mismatch in the mapping
4) 99 occur if all the active correlations are not used.
5) Try this SXI_CACHE select your business process and
click on activate. change the the return code to 02
and upon activating again.
This will help you :
http://help.sap.com/saphelp_bw31/helpdata/en/c6/893bca449311d1893e0000e8323c4f/content.htm
Regards
Agasthuri Doss -
Is it possible to update a checked out record in a workflow?
Hi All,
I want to join a checked out records in a workflow with a updated record.. I am getting the following error:
Import failed. Cannot import record because it is already in a workflow or is already checked out by another user
Import action: Update (All Mapped Fields)Source record no: 2
I have created a workflow with validations in it.. and they are failed and the records are held in that workflow.. Now I want to update those records with another import.. I am unable to join that check out records in the workflow..
Any inputs.
Thanks
Rajeev
Regards.
RajeevHi Rajeev,
Yes we can not import the records which are in an Workflow your import fails.
As ravi suggested Auto join checked out records will work only when the user who checked out and the importing user are same.. but if you are trying to update the record which is checked out by another user you can not be able to update that record.
Why are the records which are failed in the other workflow are checked out? any reason.
when you design the worflow for validating a record are you using validation step or branch step ?
You should use branch step on default condition you should have an assginment(for stating some field in the repository as Error so that you can trace how many records failed) and another stop step which will check in\rollback those values.
So your records will be in check in after the first workflow is processed..... and you can proceed with your import then.
Let me know whether i understand your problem or not, if i am wrong please let me know the complete scenario which you want to achieve.
regards
Sowseel -
Hi,my experts:
SRM5.0 ,ECS,
In my case ,I want implement the spending limit workflow to replace the one-step and two-step approval workflows. I want my worflow like this:Output limit not exceeded - start 0-step-approval workflow;Output limit exceeded - start 1-step-approval workflow;
I config the workflow like this:
1、Deactivate the event linkage for the workflowsWS10000129 (one-step approval)、 WS10000031 (two-step approval)、 WS10000060 (0-step approval).
2、Activate the event linkage for the workflow WS10000276 (spending limit)；
3、condition for workflow ：
WS10000276：ReqtCovRequest.TotalValue>ReqtCovRequest.SpendingLimitofRequester
WS10000060：ReqtCovRequest.TotalValue <= ReqtCovRequest.SpendingLimitofRequester
4、PPOMA_BBP ：EMPLOYEE －output limit：100 usd.
－ SLAPPROVER ：USMANAGER
Now,When I one shopping cart with value 80 usd，But the SC still need to be approvaled by MANAGER.I want to know why?
BR!Thanx!
AlexHi,
I think it is not an error.
Go to BBP_PD and check which workflow template is started.
Go to SWO1 transaction, and enter Business Object BUS2121 and select test.
Select create instance and give SC number. You can check the value of ReqtCovRequest.TotalValue and ReqtCovRequest.SpendingLimitofRequester.
Go to SWD_COND and check the start condition.
Regards,
Masa -
Getting error while publishing workflow using SP designer for SharePoint 2013
Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Getting error while uploading workflow defination using concurrent program
I have created a custom workflow. I am trying the upload in the testing instance using the concurrent program Workflow Definitions Loader in update mode.
I am getting the following error log:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLOAD module: Workflow Definitions Loader
Current system time is 20-JAN-2010 09:42:06
wferr:
- 1602: Could not save.
- 1400: Could not save to database. MODE=UPLOAD EFFDATE=<null>
- 1406: Workflow definition contains unsupported feature, cannot be uploaded to this database.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-JAN-2010 09:42:07
Oracle Workflow Definition Loader 2.6.4.0.
Access level: 100, Mode: UPLOAD
Unsupported type EVENT in attribute XXOWWIRC/EVENT_MESSAGE
Unsupported type EVENT in activity XXOWWIRC/CANDIDATE_REGISTRATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_APPLICATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_IRC_ASG_STATUS
Unsupported type EVENT in attribute IRC_GET_XML_VALUE/EVENT
Unsupported type EVENT in attribute COMPAREEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute GETEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute SETEVENTPROPERTY/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPAREDATE
Unsupported type EVENT in attribute XMLCOMPAREDATE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARENUMBER
Unsupported type EVENT in attribute XMLCOMPARENUMBER/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARETEXT
Unsupported type EVENT in attribute XMLCOMPARETEXT/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLGETTAGVALUE
Unsupported type EVENT in attribute XMLGETTAGVALUE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLTRANSFORM
Unsupported type EVENT in attribute XMLTRANSFORM/EVENT
Unsupported type EVENT in attribute XMLTRANSFORM/NEWDOCUMENT
Note : The same concurrent program is uploading this work flow without any error in the Development instance.
Access level information is following:
Acess Level : 100
Check box Allow modification of customized object is not checked.
For all the workflow entities access tab information is following:
customization level : 100
Access Level : 100
Protection Level : 100
Option Preserve customization is checked
Option lock at this access level is checked.
Please suggest
Regards
Devender YadavWell - it shouldn't, but that doesn't mean that it won't make any difference :)
If only one method doesn't work (and I must admit that I never use the concurrent program if I can avoid it), then the problem lies with the concurrent program. If none of the methods work, then there is a different problem.
If you can deploy to one environment but not to another then I would also look at the differences between environments - patches, init.ora settings, profile options etc. to see where the difference lies.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
Error while querying workflow message attributes for task
Can some one please help me with this error?
I get this error when I submit a task in worklist app. I have figure out that it is causing due to one payload in the table in the task. If remove that payload I am able to submit the task.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
oracle.jbo.JboException: Error while querying workflow message attributes.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.datacontrol.XSDDataControl.invokeOperation(XSDDataControl.java:460)
at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2144)
at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)Can anybody help me on this?
I did some google but I get this only which is not much helpful.
http://download.oracle.com/docs/cd/E14571_01/core.1111/e10113/chapter_bpm_messages.htm -
ERROR Message while creating Rebate condition record T code VBO1
Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
sivaHi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Error during MIGO-Error during maint. of delivery costs in master condition
Hi
We are getting error as below during MIGO against a PO with doc type NB:
"Error during maint. of delivery costs in master conditions, Delivery cost conditions in different validity periods not identical"
What might be cause??
Thanks
MaruthiCheck the delivery conditions in condition tab of PO.
Try to check if there are any delivery condition records mainatined.
I think the problem is mostly due to overlapping validity period. Try to change the validity period for the same. -
Error during check of component BP_EEW view ContactRelEL in WCF_CC T.code
In CRM 7.0 EhP1, Perform Check showed error in UI Configuration that:
"Context Node Attribute does not exist: STRUCT.ZZFIELD in Object type: BP_ACCOUNT, Subobject type: ZZI5TEEWCONTACT
Role Config Key: <DEFAULT>, Component Usage: <DEFAULT>".
Please help on how to resolve this.
Also, appreciate your help in providing information resources in working with WCF_CC t.code, how to rectify errors?Thanks Leon.
I selected the edit button, which lauched the UI Config tool. I noticed that the field attribute properties is not Hidden.
I do not see an assignment to Design layer. I tried to add Assignment.
Selected the object type BP_ACCOUNT & expanded it. But did not find the sub objectype ZZI5TEEWCONTACT.
What is the assignment I should make?
Information I'm looking for is to how to work with the transaction. It is intuitive, but I'm looking for information as to how to navigate to various places and fix issues.
For Eg: Error during check of component BP_EEW view RelEL was the error message.
I couldn't find any clue to proceed with this.
Please tell me the needful information I should be equipped with to understand & resolve issues.
Edited by: crmdevelopers on Jan 25, 2012 7:08 PM -
Error when running workflow form list item - workflow manager SharePoint 2013
I am getting the following error in the workflow services log when I tried to run a SPD 2013 workflow from as list item. The workflow page comes up with an "An unexpected error has occurred"
page when opened:
Error processing management request. Method: GET, RequestUri: http://servername:12291/$Workflows/$Instances?$skip=0&$top=100&monitoringParameter=1f51aa43-2f1c-4fc5-a86d-f638ca57c00d, Error: System.Data.SqlClient.SqlException (0x80131904): The procedure "GetInstances" has no parameter named "@OtherWorkflowStatus".
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.HttpAsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.<>c__DisplayClass9d.<EndGetInstances>b__9c()
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.ExceptionFilter[T](Func`1 body)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
ClientConnectionId:d2039360-b352-4d81-9bb7-b647e2938d06
Can't find anything on google.
Edit: Ok, when I look at the error, it is saying the the "GetInstances" stored procedure in the WFInstanceManagementDB database does not have a parameter named "@OtherWorkflowStatus".
For laughs, I added the parameter (which wasn't in there). Now I get the error:
Procedure or function 'GetInstances' expects parameter '@OtherWorkflowStatus', which was not supplied
It seems like there is something not right about my installation. Previously, I couldn't get the workflow backend service to run because there were config values missing from the workflow manager database. At the time I tried to uninstall/reinstall
WFM to no avail. I eventually had to manually add the values to get it to work. Something is not right about the WFM install/config process.Here is what I had to do to get it working:
Leave the WFM (Workflow Manager) farm using the WFM config tool
Uninstall WFM, Service Bus, and the CU's from control panel
Uninstall Workflow Manager Client if it exists in the control panel, it didn't in mine
Delete the following databases in SQL Server:
SbGatewayDatabase
SbManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
Delete the workflow proxy service in Central Admin (important)
Application Management > Manage Service Applications
Highlight (select) the Workflow Service Application Proxy service (don’t click the hyperlink)
Select “Delete” from the ribbon.
Restart the server
Reinstall
Enable the workflow proxy service in CA for the web app, the 2013 workflow option will not show up in SPD unless you do this.
Application Management > Manage Web Applications
Select your web app
Select “Service Connections” from the ribbon
Check the Workflow Service Application Proxy item and click “OK” -
Error in the workflow which executes background synchronous webservice task
Hi,
I am very new to SAP Workflows. I created a workflow with one activity step in it. The activity step actually executes a task TS77000300 (synchronous calculation - its an SAP task). When I test it. I get an error "Error when starting the service" with exception 8987, area SWF_HTTP and message 125 - Object WEBSERVICE method PROCESSBATCH cannot be executed.
I checked in WF_EXTSRV tcode, there is an entry for the background synchronous webservice task.
I checked in SWLWPTSSID table, there is an mapping between task-id and service id from WF_EXT SRV.
I am not sure where its going wrong. Any help resolving this issue is appreciated. Thanks a lot.
Regards,
RajaGurprit/All
Thanks Gurprit for the direction.
Even if I execute the the workflow( WS77000647 from SAP). The first step invokes Process Dialog which asks for three numbers and two operands. When I input all the input params and click calculate button, the second step which is actually the background synchronous task, results in the same error in the workflow log and in the Process Dialog page browser it says "Entries sent for calculation" with the same input screen.
Am I missing anything here to run background synchronous task? Any help regarding this is appreciated.
Thanks & Regards,
Raja -
ORABPEL-9708 Error while querying workflow task WFTask. Caused by:ORA-00936
Hi,
I am trying to integrate my Primavera p6 web version8.0 with the BPM setup 11.1.1.3 . The BPM is setup fine.
But when I integrated with primavera p6 and on load of workflows portlet of p6 web where the BPM tasks are listed, I am getting following exception in BPM console:
Error while querying workflow task WFTask.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services. .
ORABPEL-9708
Error while querying workflow task WFTask .
Error while querying workflow task WFTask.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services. .
at oracle.bpel.services.workflow.repos.driver.WFTask.getWFTask(WFTask.java:2181)
at oracle.bpel.services.workflow.repos.driver.PersistencyService.getWFTask(PersistencyService.java:907)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:751)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy220.queryTasks(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.queryTasks(TaskQueryServiceBean.java:120)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.queryTasks(TaskQueryService_oz1ipg_EOImpl.java:1019)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:95)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:201)
at oracle.jdbc.driver.T4CCallableStatement.executeForDescribe(T4CCallableStatement.java:864)
at oracle.jdbc.driver.T4CCallableStatement.executeMaybeDescribe(T4CCallableStatement.java:948)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1335)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3568)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3620)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
at oracle.bpel.services.workflow.repos.driver.WFTask.getWFTask(WFTask.java:2153)
at oracle.bpel.services.workflow.repos.driver.PersistencyService.getWFTask(PersistencyService.java:907)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:751)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy220.queryTasks(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.queryTasks(TaskQueryServiceBean.java:120)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.queryTasks(TaskQueryService_oz1ipg_EOImpl.java:1019)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Could anybody please help me out in resolving the issue?
Thanks and Regards,
KrishI have the same problem with P6 R8 integration with BPM 11g (running on WL 10.3.5.0). Any sugestions how to solve this?
-
"error loading updater workflow"...trying to install camera raw 6.3 plug in
A very helpful response to an earlier question got me to realize the need to instll the latest raw plugin....6.3....
Now when I go to install I get "error loading updating workflow"
any help on this one???
Thanks
I have CS5 using windows 7 on my dell inspiiron 1545 pc......this was an update t cs5 from previously installed cs4
version"PDA file "and "changed PDA file...."
PDA file
12/21/2010 11:35:13 PDApp - Build Version - 1.0.175.0
12/21/2010 11:35:13 PDApp - Logging Level verbosity Set to 4
12/21/2010 11:35:13 PDApp.CommandLineParser - Parsing the command
line provided. Number of command line arguments is 6
12/21/2010 11:35:13 PDApp - DWA AppletID argument not specified on
command line. Trying to find the existing instance
12/21/2010 11:35:13 PDApp - This is the first instance so creating a
thread for listening to the created pipe
12/21/2010 11:35:13 PipeThread - Pipe thread started
12/21/2010 11:35:13 PDApp - Starting AsyncMessageProcessor
12/21/2010 11:35:13 PDApp.AsyncMsgProcessor - AsyncMsgProcessor
initialized...
12/21/2010 11:35:13 PDApp.AsyncMsgProcessor - AsyncMsgProcessor
started. on thread id = 4960
12/21/2010 11:35:13 PDApp - Detecting Applet Database Library file...
12/21/2010 11:35:13 PDApp - Fetching Applet registeration
information...
12/21/2010 11:35:13 PDApp.AppletManager - AppletManager initialize...
12/21/2010 11:35:13 PIM - Build Version - 1.0.175.0
12/21/2010 11:35:13 PIM - Logging Level verbosity Set to 4
12/21/2010 11:35:13 PIM - CREATE PIM Instance ...
12/21/2010 11:35:13 Utilities - File does not exist
12/21/2010 11:35:13 PIM - trying to createOrUpdatePIMDbSchema.
12/21/2010 11:35:13 PIM - Current db schema version on machine 1.
12/21/2010 11:35:13 PIM - Current db schema version to install 1.
12/21/2010 11:35:13 PIM - PIM DB Schema is up to date. Current schema
version is 1.
12/21/2010 11:35:13 PIM - PIM Database is Up To Date.
12/21/2010 11:35:13 PIM - PIMSqlite closeDB status 0
12/21/2010 11:35:13 PIM - FREE PIM Instance ...
12/21/2010 11:35:13 PDApp.AppletManager - Applet database path -
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..
12/21/2010 11:35:13 PDApp.AppletManager - PIM library path -
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\AdobePIM.dll
12/21/2010 11:35:13 PDApp.AppletManager - Loading PIM library...
12/21/2010 11:35:13 PDApp.AppletManager - Getting applet data from
Applet database
12/21/2010 11:35:13 PDApp.AppletManager - All installed pakages
version string (pim_getCurrentPackagesVersion) is
DWA:1.0.172.0|LWA:1.0.175.0|PDApp:1.0.175.0|UWA:1.0.175.0
12/21/2010 11:35:13 PDApp.AppletManager - Registering Applets...
12/21/2010 11:35:13 PDApp.WindowManager - Initializing native
WindowManager
12/21/2010 11:35:13 PDApp.WindowManager - Creating window instance
12/21/2010 11:35:13 PDApp.WindowManager - Checking for appletID and
appletVersion given in CommandLineOptions
12/21/2010 11:35:13 PDApp.WindowManager - Creating APE stage instance
12/21/2010 11:35:15 PDApp.ExternalGateway - MessageHandler
initialized...
12/21/2010 11:35:15 PDApp.ExternalGateway - ExternalGateway
initialized...
12/21/2010 11:35:15 PDApp.ExternalGateway - NativeCommandHandler
initialized...
12/21/2010 11:35:15.431 PDApp.StartupCommand Logging Level verbosity
Set to INFO
12/21/2010 11:35:15.432 PDApp.StartupCommand Processing the startup
Command
12/21/2010 11:35:15.439 PDAPP.AppletManager Starting Applet
registeration...
12/21/2010 11:35:15.457 PDAPP.MainDisplayMediator Looking up for the
Exact versioned applet for ID :UWA_UI
12/21/2010 11:35:15.479 PDAPP.AppletManager Loading Applet: UWA_UI
Version = 1.0
12/21/2010 11:35:15.514 PDApp.ZStringLoader PDAPP SWF - locale set
to - en_US
12/21/2010 11:35:15.570 PDAPP.AppletManager Loading progress0 out of
521002
12/21/2010 11:35:15.572 PDAPP.AppletManager Loading progress65536 out
of 521002
12/21/2010 11:35:15.574 PDAPP.AppletManager Loading progress131072
out of 521002
12/21/2010 11:35:15.583 PDAPP.AppletManager Loading progress196608
out of 521002
12/21/2010 11:35:15.585 PDAPP.AppletManager Loading progress262144
out of 521002
12/21/2010 11:35:15.588 PDAPP.AppletManager Loading progress327680
out of 521002
12/21/2010 11:35:15.590 PDAPP.AppletManager Loading progress393216
out of 521002
12/21/2010 11:35:15.592 PDAPP.AppletManager Loading progress458752
out of 521002
12/21/2010 11:35:15.594 PDAPP.AppletManager Loading progress521002
out of 521002
12/21/2010 11:35:16.023 PDApp.ExternalGateway Recieved Applet Loading
Completion
12/21/2010 11:35:16.027 UWA.ZStringLoader Trying to load ZString for
preferred locale - en_US
12/21/2010 11:35:16.087 UWA.ZStringLoader Applet locale set to -
en_US
12/21/2010 11:35:16.319 UWAApplet.Startup Processing the startup
command
12/21/2010 11:35:16.324 UWA.LoadWorkflowCommand Processing the
LoadWorkflowCommand
12/21/2010 11:35:16 PDApp.AppletManager - Loading Applet - UWA_Native
for WindowID - 1
12/21/2010 11:35:16 UWANative - Build Version - 1.0.175.0
12/21/2010 11:35:16 UWANative - Logging Level verbosity Set to 4
12/21/2010 11:35:16 UWANative - Updater in patch mode
12/21/2010 11:35:16 UWANative - Error in mdbOpenSessionNoCreate 1
12/21/2010 11:35:16 UWANative - Failed to initialize Updater Core
12/21/2010 11:35:20 Utilities - Directory not present
12/21/2010 11:35:20 UWANative - Could not delete the temp folder "".
12/21/2010 11:35:16.594 UWA.LoadWorkflowCommand The start applet did
not return the result xml. Startapplet returned
12/21/2010 11:35:16.595 UWA.LoadWorkflowCommand Cannot start
UWANative Applet
12/21/2010 11:35:20 PDApp.AppletManager - Un-loading Applet -
UWA_Native for window ID - 1
12/21/2010 11:35:20 PDApp.ExternalGateway - Callng the finalize
function of the applet
12/21/2010 11:35:20 PDApp.ExternalGateway - Unloading applet
12/21/2010 11:35:20.878 PDApp.HostMessageHandler Recieved force
window close message
12/21/2010 11:35:20.878 PDApp.HostMessageHandler Sending message to
native
12/21/2010 11:35:20 PDApp.WindowManager - Window destruction reached
for ID - 1
12/21/2010 11:35:21 PipeThread - Pipe Connected. Waiting for data to
come on pipe
12/21/2010 11:35:21 PipeThread - 2 bytes read on pipe
12/21/2010 11:35:21 PipeThread - Data recieved on pipe. Sending the
data to the main thread to process and show window
12/21/2010 11:35:21 PipeThread - Message Sent to main thread
12/21/2010 11:35:21 PipeThread - Disconnecting pipe
12/21/2010 11:35:21 PipeThread - Pipe Disconnected
12/21/2010 11:35:21 PipeThread - Terminating the pipe thread
12/21/2010 11:35:21 PDApp - Terminating native MessageQueueManager
12/21/2010 11:35:21 PDApp - Terminating native AppletManager
12/21/2010 11:35:21 PDApp.AppletManager - AppletManager destructed
12/21/2010 11:35:21 PDApp - Terminating WindowManager
12/21/2010 11:35:21 PDApp.WindowManager - Destroying PDApp main
window's
12/21/2010 11:35:21 PDApp.WindowManager - Destroying PDApp main
window's sucessfully
12/21/2010 11:35:21 PDApp - Terminating ExternalGateway
12/21/2010 11:35:21 PDApp.ExternalGateway - ExternalGateway
destructed
12/21/2010 11:35:21 PDApp - Terminating MessageHandler
12/21/2010 11:35:21 PDApp.ExternalGateway - MessageHandler
finalize...
12/21/2010 11:35:21 PDApp.ExternalGateway - MessageHandler destructed
12/21/2010 11:35:21 PDApp - Terminating NativeCommandHandler
12/21/2010 11:35:21 PDApp.ExternalGateway - NativeCommandHandler
destructed
12/21/2010 11:35:21 PDApp - Terminating AsyncMessageProcessor
12/21/2010 11:35:21 PDApp.AsyncMsgProcessor - Destroying
AsyncMsgProcessor
12/21/2010 11:35:21 PDApp - Terminating NativePlatformHandler
12/21/2010 11:35:21 PDApp - Terminating logger
PDA changed file
12/21/2010 03:00:24 AAMUpdatesNotifier - Build Version - 1.0.175.0
12/21/2010 03:00:24 AAMUpdatesNotifier - Logging Level verbosity Set
to 4
12/21/2010 03:00:27 Utilities - File does not exist
12/21/2010 03:00:41 AAMUpdatesNotifier - CFU .... StatusCode(41)
ErrorCode(212)
12/21/2010 03:00:41 AAMUpdatesNotifier - inside getUpdates
12/21/2010 03:00:41 AAMUpdatesNotifier - Cannot find any update Node
12/21/2010 03:00:41 AAMUpdatesNotifier - All updates count 0
Maybe you are looking for
-
Agent Determination Rule Not Working
I have created an new agent determination rule in PFAC. The category I used is "Agent Determination: Responsibilities". I have also selected the "Terminate if Rule Resolution has no Result" option. The container has one element in it which is NOT man
-
Static Variable in webapplication
Are the values of static variables preserved when two different users try and access them? i.e. If one web application user sitting in Chicago sets a static variable to 'true' from 'false'. Will the other user sitting in Omaha see it as 'true' or 'fa
-
How to confirm the alerts automatically in the internet mail?
Hi,gurus: I wanna know how I confirm the alerts automatically in the internet mail.Now we have to navigate to the alert inbox to confirm the alert,but can I do it in the internet mail? I have confirued the parameter in ALRTCATDEF->CONFIGURE->SE
-
Urgent - Connectivity between Oracle 8i and Forms5.0
I have installed Oracle 8i with the Oracle Home as c:\Oracle and Forms 5.0 with the Oracle Home as c:\Orant. But when I run Forms 5.0, it is not connecting with the database. The error is - The ordinal 2 could not be located in the dynamic link libra
-
Change States in component from main view
The scenario like this: The main view includes many component views. On my main view there have a radio button to choice different role type, for example: admin and user. For different role have different views. But they don't have big difference. My