Check for a Comma (,) in an address field and send tht (,) as blank space t

Hi,
I have requirement , where I'm supposed to check for a Comma (,) in an address field and send tht (,) as blank space to the workarea.
Do we have any FM or any check method for this.
Plz tell me.
Rohini.

Hi,
say address fields is "v_addr"
DATA : v_len TYPE I,
           v_cnt1 TYPE i,
           v_cnt2 TYPE I value 1.
v_addr = 'adresss,fiedls '.
v_len = strlen( v_addr ) .
DO v_len TIMES.
     IF v_addr+v_cnt1(v_cnt2) EQ ',' .
         v_addr+v_cnt1(v_cnt2) = ' '.
        v_cnt1 = v_cnt1 + 1.
     ENDIF.
ENDDO.

Similar Messages

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?

Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?
Thanks in Advance

I don't think there is a way for Edge Code. I'm not sure about Reflow.
Why don't you just upgrade? That will stop the notifications.
Randy

How to create a pdf for the URL attached to an invoice and send it as an attachment in a mail

HI,
I have requirement where i need to get the URL attached to an invoice, create the pdf and send as an attachement in a mail.
The URL attached to an invoice can be seen by following the path : VF03-> Billing document->system->Services for object ->Attachement list.
On searching through existing forums, i found that there is a table 'SRGBTBREL' which stores relationships of GOS object. On giving the invoice number in field 'INSTID_A', i could find an entry in this table.
To get the content, i used the class CL_FITV_GOS, method GET_CONTENT. To this method i passed following values:
IV_ATTA_ID = FOL21000000000521URL39000000000012 (The value if field INSTID_B from table SRGBTBREL)
IV_OBJTP   = 'URL'
On execution, i get URL link but the content table is empty.
Could anybody provide some input on how i get the content? Or may be how i can create pdf from the URL link and attach it to mail as an attachment?
Thanks,

Hi Amit,
Solution provided by you is working when the link length is one line but it is not working for more than one line
Eg: say link is https://......80 [80 characters long]
I will give    <a href="https://...72            [in first line]
                 73..80">click here</a>         [in second line]
I will get the output as 73...80">click here
But i want only CLICK HERE in my output..
Please suggest solution.
Thanks,
Kavya

Scrollbars disappear for text boxes when I click 'Sign' and 'Send Signed Document'!!

I recieve a number of forms from another company with which I need to fill in and return back. These boxes allow me to type into the fields, and if I type too much, a scroll bar will show so I can change it at any time I like.
The issue i'm having is because Adobe thought it'd be clever to only show the scroll bar when you click a field, when you click 'Send Signed Document', it won't allow me to edit the document again. This means any information I have typed beyond the box limit is unviewable - that's no good to the company I need to send it back to.
How do I get a scrollbar to show for this?
My only other option is to just click 'Save as' and send it, but then my document is at risk of being edited by someone else.
Any help greatly appreciated.

In the past they have, however by ticking the box to agree to the terms and conditions and adding a signature renders the form unreadable if i've typed more than the box will visibly show. In truth it's poorly done, should have made the box expandable, but I still don't see why I need to be clicking the box to get a scroll bar. If the information I type is effectively stamped down so I can't click on it again, why not give me a scroll bar so I can at least read back what i've written and/or amend things if necessary?
It's bizarre, and i'm at a loss what to do.

Extracting XML fields and send it to backend

Can somebody give me an idea of how to take XML,extrace some fields from XML and send it to backend using stateless session bean?Which API's I should use?
Thanks,
Sonali

First and the foremost thing you require is a Java XML Parser....there are plenty available....xml4j, xerces, etc....google search will certainly yield better results in this category....
These tools will provide two ways to parse the given xml...DOM and SAX (don't ask me the details, pick up a book/search the net). Depending upon which parsing way you took, desired elements from the xml can be picked up....Now all of the code written to achieve the above can reside anywhere...either in a Swing client, Servlets, EJbs or whereever (of course you will require parsers jar file in the classpath). And then you can do anything with this data, send it to server or write it to a file!
Hope it helps.....but I sincerely suggest gaining kowledge by reading doc & trying examples in Sun site....U will find plenty of tutorials
Cheers,
Manjunath

Certificate for the website, was going to copy and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down. Why what happened i am not sure about going to the website now....

Question
Went to Crossings Book Club website while there something popped up about the certificate for the website, i was going to copy it and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down.

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

After creating a form from an existing document, viewing it in Adobe Reader for Android only shows the form fields, and not the document behind it.

Using an existing PDF file to create an editable form that I can update on my tablet as I go, but when I open the file on my tablet (using Adobe Reader for Android), it only shows the blue editable fields that I've created, but not the actual form that's supposed to be behind it. However, it views properly on my PC. Am I not saving it out correctly?

Please share the sample file with me. I am sending you instruction via private message.
Regards,
Anoop

Address Field and Replying

When I reply to an email that has included my kids email accounts as well as my own, Mail will decide to make the reply 'From' one of their accounts instead of mine?
Why is this and how do I correct it so when I reply it is from me, not one of them?

This is a repost of what I posted last week and is similar:
Hi, here is another person this has been happening to me between my Apple account & my wife's email only account. My situation & preference information is same as zentra's & Dan's....
Recently I was at a Apple store (One To One) and they also said they never heard of it but when I mentioned to a few of my Mac friends and they have it also. It is now happening almost daily with my wife retired & home using the Mac and it is irritating her when her friends reply to me
Gene
Additional info - I have 3 accounts within the Mailbox, to the left with triangles, mine is 1st, my wife's email only account is #2 and a Verizon mail account 3rd (used for web surfing, subscriptions, web shopping etc). Many times she will send out a email to her friends via reply that is in her email account ONLY and it selects my account and therefore they will reply to me!
We try to check the drop down dialogue box but not always successful when answering numerous emails. I have researched it and can find NO pattern and it is extremely annoying as it wasn't always this way until we noticed it about 12 months ago. Again the Genius folks at 2 different Apple stores just look at me and say it doesn't happen!

Mail set TO field and send question...

Hello,
I need a little AppleScript help with Mail. Let's say I have an open outgoing mail message and I want to set the "to" field. How do I do this? Remember, this is with an existing open outgoing message, not an outgoing message I'm creating via AppleScript. Actually, I'm creating the message with the redirect AppleScript command, which is supposed to return an outgoing message, but it's broke and doesn't.
I know I can use System Events to post keystrokes, but there has to be a better way.
Also, is there a way to "Send" the message via AppleScipt? I know I can use the UI commands to select the menu item or push the button, but is there a way to send without relying on the GUI?
Thanks,
Allan

Ummm, the script seems to do nothing. I would think it would create a new message and address it to [email protected], but it just does nothing.
When I'm looking for is help to address an already open new message. For example:
Open Mail
Create a new message
Switch to Script Editor
Run a script that addresses the new message
Spcifically what I'm doing is trying to redirect a message. Here's how aI have to do it now:
tell application "Mail"
activate
set theRedirectRecipient to "[email protected]"
set theSanityCheckNumber to 30
set theCount to 0
set selection_list to selection
repeat with one_item in selection_list
set theID to (message id of one_item)
-- skip it if it was already redirected
set theHeaders to the name of the header of one_item
if theHeaders does not contain "resent-to" then
redirect one_item with opening window
delay 1 -- mail can get confused, so slow down a little
tell application "System Events"
tell process "Mail"
keystroke theRedirectRecipient
end tell
end tell
--delay 1 -- mail can get confused, so slow down a little
-- send the mesage
tell me to do_menu("Mail", "Message", "Send")
--delay 1 -- mail can get confused, so slow down a little
-- see if we should continue
-- if mail or this script does something screwy, we can abort here
set theCount to theCount + 1
if theCount mod theSanityCheckNumber is 0 then
tell me
activate
display dialog "We've redirected " & theCount & " of " & (count of items in selection_list) & ". Continue?"
end tell
tell application "Mail" to activate
end if
end if
end repeat
end tell
on domenu(appname, menu_name, menu_item)
try
-- bring the target application to the front
tell application app_name
activate
end tell
tell application "System Events"
tell process app_name
tell menu bar 1
tell menu bar item menu_name
tell menu menu_name
click menu item menu_item
end tell
end tell
end tell
end tell
end tell
return true
on error error_message
return false
end try
end do_menu
2.7 GHz Dual Mac OS X (10.4.8)

Recommendation for best way to copy a DVD and send to Vimeo?

8 years ago I made a DVD of a 2-hour SD program and now I'd like to put it up on Vimeo. Before I upload it, I'd like to copy it into FCPX to add some text. What software and process do you recommend so I'll end up with the best quality on Vimeo (I have Vimeo Pro, which allows up to 20GBs).
I've been trying to copy it, but I keep getting little scan lines around points of movement.
Your recommendations are welcome! Thanks. Duncan

Russ and Tom, thanks for your guidance on this.
Russ, you were right that the Playback Component will work with 10.9. I was confused by the Apple Store website that says, “On OS X Lion and later, MPEG-2 playback functionality is built into QuickTime X. The QuickTime MPEG-2 Playback Component is not required and cannot be installed.” That warning proved true, since when I downloaded it, I couldn’t install it. But the link Tom sent me told me how to load it anyway, using the Streamclip utility script, which worked.
I then experimented with about 9 different settings to get the digital file as close to the DVD in quality as possible. The one that worked best for me was a combination of the settings you both sent me: Open the DVD in Streamclip, set Compression for ProRes 422 Quicktime, Quality: 100%, check Deinterlace Video, check Field Dominance Upper Field First (I tried Lower, but didn’t see a difference).
Although Streamclip lists Frame Size for 4:3 as “640x480”, Tom pointed out “The native format for DVD is not 640x480, but 720x480.” So I selected “720x480 (DV-NTSC)” for Frame Size in Streamclip. Then I clicked “Make Movie”.
Then I imported the file into FCPX, created a new project, and, as Russ suggested, had FCPX set the project properties based on the first clip. I loaded the file on the timeline, added my lettering, and then went to Share, where I exported it as a “Master File” with “Web Hosting” chosen. This produced the finished file ready for uploading. Although in stages of this process there were jagged lines on lettering, they were mostly gone on the final file. The end product is close in quality to the original DVD. Close enough.
Russ and Tom, I struggled with this for days. Thank you for helping me.

I updated Firefox to 34.0.5 for Mac OS 10.9 rev34.0 and the screen is blank

I have removed the AdBlock to no avail. The screen is totally blank. However, I can display the troubleshooting information in a browser page. Another browser works fine on the same device.

Fixed by clearing the Cache. Thank you

Request to eliminate blank address fields (ie: BLOCK) in Ship To & Bill To

When configuring the Address Formats (Setup>Business Partner), if the Street field is selected for line one of the address field, the Block field is selected for line two of the address field, and City is selected for line three of the address field - and the Block field is blank (which happens quite often) then the address field created by SAP for printing on documents will have a blank line on the second row of the printed address.
Most customers do not like this (some even go to the extent of modifying the address to remove the blank line); therefore we would like SAP to include some logic that would eliminate the blank line if the BLOCK field is empty.
Do other partners have the same issue?

Thanks for your reply. The issues that our customers complain about are the way the addresses print in the standard PLD documents, which all use the pre-formated block of text that SAP creates. Unfortunately there is no way to change this text block.
A couple of years ago, as per your suggestion, I attempted to create my own special text block by concatenating the various address lines, but then I ended up with some custom stuff, which is not ideal even if I could have gotten it to work properly - something that I was not successful at achieving.
I think that the proper solution is for SAP to make thier address assembly routine just a little bit smarter by not using the "BLOCK" field if it is empty.

Empty space check for text box

i need to verify null check for textbox fields and it sould not allow spaces as well.... is there any way like trim functions.. please help me..
Already tried with JavaScript's trim() and not working... I'm using es3

Hello and welcome to the forum,
You do not tell which version you are using? And I suppose you are talking about a Text Entry Box?
If you want to check if the right text is entered, you'll have to tick 'Validate User Input' in the General accordion of the TEB Properties panel.
A HUD will appear under the TEB, labeled Correct Entries. With the + button you can add correct values (text that is correct when the TEB is validated), eventually check the 'Case Sensitive' option.
In the Options accordion you can check the captions to appear (like for a button or a click box).
When the user clicks the Submit button or uses the shortcut key for the TEB, one of two actions (Action accordion) will be performed:
Success: if the text was correct, you can choose there for 'Go to Next Slide'
Last Attempt after the attempts are exhausted
Lilybiri

How to visit a pasted url in address field?

This may seem a naïve question:
Some background: I have never used Safari before. I have just installed *Safari 5.01* for Windows on my *Windows 7 PC*, and when I *+copy and paste+* an url for a particular existing web page into Safari's address field (which url loads successfully in Firefox, Opera, and IE ), I find I have no *go to* or load arrow, or other means, such as pressing enter or return, to make the browser load the pasted address. When I press Ctrl+L nothing happens, whether from the drop down menu at File: *Open Location...* or as a double keyboard command.
And so I resorted to importing a bookmark for the address from IE, and then Safari loaded it successfully.
Can I not just copy and paste addresses into Safari's address field and have a *+simple next step+* to load the page as I can with IE, Firefox, and Opera ?
I tried typing part of the address in manually for Safari's autocomplete to find it, but it wouldn't find the address, which is very new, but does exist, and as I have said, loads in the other three browsers with a simple paste and enter. This *+copy and paste+* method happens to be a very convenient means of loading some sites, with only one option being available, that is the exact address, rather than possibly several options that are offered up as one types part of the address, which have to be looked at and chosen from.
Any assistance will be appreciated.
Thanks … allaniam

*I confirm a similar bug exists on Safari 5.0.2 for Windows, running on a 32bit Windows XP SP3.*
Description
1. You copy an URL, not matter how you copy it (copy the URL text, or from another browser address bar, or from a webpage using the contextual menu "Copy Link", and etc)
2. When you try to paste in the Safari address:
===(i) if you use keyboard shortcut Control-V to paste in the URL, and press ENTER - everything is normal, meaning you will leave your previous webpage and go to the new page with that URL you pasted in using Control-V
===(ii) if you right click on the Safari address bar, invoke the contextual menu that popups from there, and choose "Paste" from the menu,and then hit ENTER after you paste in the new URL:
*======(A) the new URL you pasted in will disappear.*
*======(B) the old URL before your paste, will re-appear in the address bar.*
*======(C) the cumulative effect this operation will be the same that you reload the previous page.*
This is the symptoms on 32bit Windows.
*It seems in the current build of Safari for Win, "Paste" command from a menu denotes something different from its shortcut "CTRL-V".*
This is a very weird thing.
Just for the record, Safari 5.0.2 on Mac OSX 10.6.4 doesn't share the bug.
*By the way, I have also surveyed the exactly version and build numbers for both the Safari versions:*
Safari 5.0.2, build 7533.18.5: on WinXP 32bit
Safari 5.0.2, build 6533.18.5: on Snow Leopard.

Check for a Comma (,) in an address field and send tht (,) as blank space t

Similar Messages

Maybe you are looking for