Request to eliminate blank address fields (ie: BLOCK) in Ship To & Bill To

When configuring the Address Formats (Setup>Business Partner), if the Street field is selected for line one of the address field, the Block field is selected for line two of the address field, and City is selected for line three of the address field - and the Block field is blank (which happens quite often) then the address field created by SAP for printing on documents will have a blank line on the second row of the printed address.
Most customers do not like this (some even go to the extent of modifying the address to remove the blank line); therefore we would like SAP to include some logic that would eliminate the blank line if the BLOCK field is empty.
Do other partners have the same issue?

Thanks for your reply.  The issues that our customers complain about are the way the addresses print in the standard PLD documents, which all use the pre-formated block of text that SAP creates.  Unfortunately there is no way to change this text block. 
A couple of years ago, as per your suggestion, I attempted to create my own special text block by concatenating the various address lines, but then I ended up with some custom stuff, which is not ideal even if I could have gotten it to work properly - something that I was not successful at achieving.
I think that the proper solution is for SAP to make thier address assembly routine just a little bit smarter by not using the "BLOCK" field if it is empty.

Similar Messages

  • How to add a new field to the Quote: Shipping and Bill Tab Payment region

    Hello All,
    We have a requirement to add payment description column to the Payment Region of Shipping and Bill tab in Quoting User(Quote Page).
    We have extended the View object HeaderPaymentsVOObj and created a custom view object, then created and ported the substitution.
    In Quotes page, 'Shipping and Bills' tab Payments region, we have created a new item(Payment Description), assigned the custom View object instance and attribute to it.
    We are able to enter and update the payment details before substitution, but after substitution while entering payment details we are facing the below error.
    At most one payment record can exist at quote header/line level.
    Help and inputs are highly appreciated.
    Thanks in advance.
    Regards,
    Supriya.

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • Mail from Exchange 2010 mailbox - BCC to Hotmail addresses with blank To: field not hounoured

    Hi
    This feels related to a previous question
    http://social.technet.microsoft.com/Forums/exchange/en-US/bec88844-79c1-4d17-bf73-9425842b22de/problem-sending-mail-with-bcc-and-without-to?forum=exchangesvrgenerallegacy but is slightly different - it just applies to Hotmail and related addresses (e.g.
    hotmail.com, hotmail.co.uk, outlook.com, live.co.uk).
    Sending from our Exchange 2010 to BCC addresses with blank To: field, the BCC is not being honoured, but just by Hotmail-related addresses. Any Hotmail-related recipient sent to in this fashion sees all their and other Hotmail-related addresses in the To:
    field. But any other addresses to other mail hosts (gmail, yahoo etc) in the same BCC list aren't shown, and recipients at the other mail hosts have a fully hidden BCC list (i.e. see no To addresses at all).
    If the To: field has an address then there is no problem - all BCC addresses are hidden for all recipients as expected.
    It feels like it is the way the header is being handled by the Hotmail MTAs. But I only see this behaviour from our Exchange 2010 servers (including test servers).
    Below are message headers from examples - anyone any ideas on this?
    Thanks,
    Gordon
    Headers from the same message sent as a BCC to a "@live.co.uk" address and "@gmail.com" address with no To: field, and below that a header of similar with a To: field.
    First message, sent from [email protected] (gets translated to
    [email protected]) BCCd to
    [email protected] and [email protected] with no To: address.
    Seen in mailbox of [email protected] (note the "to:" field at the bottom - this is what is being shown in the UI):
    x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9urBwwSF/6FOwwl1Py7H+wW1z5lc55JnUJDXNvxmGUxkw/bnnWJePWYXWzuS5Ywv2HQzl2GD+3A6SoaKpjD5JlShFHg3JE6so=
    Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
    [email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
    [email protected]
    X-SID-PRA: [email protected]
    X-AUTH-Result: PASS
    X-SID-Result: PASS
    X-Message-Status: n:n
    X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
    X-Message-Info: NhFq/7gR1vQRHV6jbdvQfibhgw1iwvrSqdhXuaSscqGalY1BHnH2KCdI+PRBKCQiYnAlF/zI6HIxnd9XTtPz9XHPDwg5mATFcpFtv9WV5ImszG0/OtQaSIg5iX4MbuVLCVo+t2VN/SyhCbwRod9LNPet1UXZtp+Oho5aLYTKlYQVRQ8OWRHqxMCUhgER4oHof+Be4v85/e3u59xr9Q2GEVPOpY/FDKse
    Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by SNT004-MC4F19.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
    Wed, 10 Sep 2014 03:56:32 -0700
    Received: from MTA1 ([10.14.XXX.XXX])
    by MTA2.shu.ac.uk with esmtp (Exim 4.76)
    (envelope-from <[email protected]>)
    id 1XRfZg-0004Kn-9C
    for [email protected]; Wed, 10 Sep 2014 11:56:32 +0100
    Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
    by MTA1 with esmtp (Exim 4.80.1)
    (envelope-from <[email protected]>)
    id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
    Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
    CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
    14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
    From: "user1" <[email protected]>
    Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
    Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
    Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
    Date: Wed, 10 Sep 2014 10:56:28 +0000
    Message-ID: <[email protected]>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [10.14.XXX.XXX]
    Content-Type: multipart/alternative;
    boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
    MIME-Version: 1.0
    to: [email protected]
    Return-Path: [email protected]
    X-OriginalArrivalTime: 10 Sep 2014 10:56:33.0151 (UTC) FILETIME=[E23190F0:01CFCCE5]
    Seen in mailbox of [email protected]:
    Delivered-To: [email protected]
    Received: by 10.25.156.200 with SMTP id f191csp386624lfe;
            Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
    X-Received: by 10.194.200.137 with SMTP id js9mr48633666wjc.90.1410346592418;
            Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
    Return-Path: <[email protected]>
    Received: from MTA1 (MTA1. [143.52.X.XXX])
            by mx.google.com with ESMTPS id cg3si20369633wjc.56.2014.09.10.03.56.32
            for <[email protected]>
            (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
            Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
    Received-SPF: pass (google.com: domain of [email protected] designates 143.52.X.XXX as permitted sender) client-ip=143.52.X.XXX;
    Authentication-Results: mx.google.com;
           spf=pass (google.com: domain of
    [email protected] designates 143.52.X.XXX as permitted sender)
    [email protected]
    Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
    by MTA1 with esmtp (Exim 4.80.1)
    (envelope-from <[email protected]>)
    id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
    Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
    CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
    14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
    From: "user1" <[email protected]>
    Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
    Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
    Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
    Date: Wed, 10 Sep 2014 10:56:28 +0000
    Message-ID: <[email protected]>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [10.14.XXX.XXX]
    Content-Type: multipart/alternative;
    boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
    MIME-Version: 1.0
    Similar message sent with [email protected] in To: field:  from
    [email protected]/[email protected] BCCd to
    [email protected] and
    [email protected] as seen in mailbox of [email protected]
    x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9v81cBAiz99O+8SxkfBVJ9NjbAXH8xe1rjvemR/ciBJT5MdkHvi8JYPj0vgDySrSfVnSG2OjgyyKNgjV2QF5PyGqXgRRVkQVM=
    Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
    [email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
    [email protected]
    X-SID-PRA: [email protected]
    X-AUTH-Result: PASS
    X-SID-Result: PASS
    X-Message-Status: n:n
    X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
    X-Message-Info: NhFq/7gR1vTvTqmPqDcS3ZKVZ4zJXdbe/WQhPCDn6U7TYJxfLAm+gALYf9z8EvjEIPauVTBwIF/uNFwreEfp3wgBZYYA8nUP8PFhNAMvRkDwCAnqdyWkFMZlNIQlCYkX84PJFTI7+qoRwxyIjAr2dfuXuj/qYYgN8IbRFD0FftK7d85hSKx/muFfL/1x713Efp1R2ztH/sUzvcxbXl+i8zHWvMqqF945
    Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by BAY004-MC6F14.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
    Wed, 10 Sep 2014 05:22:06 -0700
    Received: from MTA1 ([10.14.XXX.XXX])
    by MTA2.shu.ac.uk with esmtp (Exim 4.76)
    (envelope-from <[email protected]>)
    id 1XRguU-0006jA-4s
    for [email protected]; Wed, 10 Sep 2014 13:22:06 +0100
    Received: from CAS2.shu.ac.uk ([10.14.XX.XX])
    by MTA1.shu.ac.uk with esmtp (Exim 4.80.1)
    (envelope-from <[email protected]>)
    id 1XRguU-0001YY-0a; Wed, 10 Sep 2014 13:22:06 +0100
    Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
    CAS2.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%15]) with mapi id
    14.03.0174.001; Wed, 10 Sep 2014 13:22:00 +0100
    From: "user1" <[email protected]>
    Subject: test BCC - using own name in To
    Thread-Topic: test BCC - using own name in To
    Thread-Index: Ac/M8dJDWdvoIxoORH2RMAqNKM2m1w==
    Date: Wed, 10 Sep 2014 12:22:00 +0000
    Message-ID: <[email protected]>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [10.14.XXX.XXX]
    Content-Type: multipart/alternative;
    boundary="_000_24BACA8040C3054487601DFC4087062C8C013A65mbx1sh_"
    MIME-Version: 1.0
    To: [email protected]
    Return-Path: [email protected]
    X-OriginalArrivalTime: 10 Sep 2014 12:22:07.0005 (UTC) FILETIME=[D63584D0:01CFCCF1]

    I'm guessing that they're using something other than Exchange for the MTA's. I don't recall seeing this in the "Received:" headers ever since Exchange stopped using the MS Windows SMTP service:
    Microsoft SMTPSVC(7.5.7601.22712)
    --- Rich Matheisen MCSE&I, Exchange MVP

  • Check for a Comma (,) in an address field and send tht (,) as blank space t

    Hi,
    I have requirement , where I'm supposed to check for a Comma (,) in an address field and send tht (,) as blank space to the workarea.
    Do we have any FM or any check method for this.
    Plz tell me.
    Rohini.

    Hi,
      say address fields is "v_addr"
    DATA : v_len TYPE I,
               v_cnt1 TYPE i,
               v_cnt2 TYPE I value 1.
    v_addr = 'adresss,fiedls '.
    v_len = strlen( v_addr ) .
    DO v_len TIMES.
         IF v_addr+v_cnt1(v_cnt2)  EQ ','  .
             v_addr+v_cnt1(v_cnt2) = ' '.
            v_cnt1 = v_cnt1 + 1.
         ENDIF. 
    ENDDO.

  • URL request in the address field on the browser

    A few of URLs in my application are only restricted to the web master. Before creating the special user role of the application, I would like to access those URLs through the address field on a browser. The problem I have is that a URL entered on the field will lead to a creation of a new session even though I enter a URL with the current jsessionid of TC. Is a way to prevent a creation of a new session?
    Thanks.
    v.

    When I test on URLS. they show up in the address field with a jsessionid. I believe that is due to cookies disabled. Otherwise, the jsessionid wouldn't show up. But, when I check out the cookies setting on both Firefox and IE, they are enabled. I am not sure what is going on in this regard.

  • Address Field questions

    We have a requrirement that is requesting we make the Lead "Billing Zip" required on any new leads entered, As the Billing Zip field is grouped into "Address", I cannot seem to get any of the Default validation or Field Validation rules I put into place to work.
    Zip code is the identifier we use to auto-assign leads in CRM.
    The issue is that if a user does not enter a zip code, the lead gets auto assigned to the default lead person listed under lead assignment rule group "Unassigned Lead Owner", and that user is getting swampped with leads where no zip code was provided.
    Are the Address fields considered "System" Fields?
    I am aware that system fields do not allow field validation, but in address, those validation options are not greyed out, suggesting I should be able to put field validation rules on them.
    I tried [<ZipCode>] IS NOT NULL
    [<ZipCode>] <> ''
    I also tried creating a new "Lead Zip Code" field where we can force the user to populate the new field, and then put a Post Default Validation Rule on the billing address field that says [<ZipCode>] = [<stLead_Zip_Code>]. That does not auto-populate the Billing Zip field upon save either.
    Any Suggestions, and/or can anyone confirm if the address fields are considered "System"...hence these attempts are a mood point?

    Hi, I tried putting the post default in place by first making the new "Lead Zip Code" field required, and also have a validation rule set on the new field where "[<stLead_Zip_Code_ITAG>] IS NOT NULL"
    I then went into the "Addrerss" field and added the post default = "[<ZipCode>] = [<stLead_Zip_Code_ITAG>]" Logged out, back in, and created a new lead. That did not work. The "Billing Zip" field is still blank when I create and save a new Lead.
    Am i not using the correct criteria in my post default criteria?
    We are currently a single country configuration, so that should not be an issue.
    Edited by: TeknoMan on Mar 31, 2011 1:49 PM

  • Address field data is not getting dispalyed in company details

    Dear All,
    After filling up the necessary details in the Administration->system initialization->company details->general tab->Local language for the address of the company.
    I am not getting the address displayed in the Address field.
    I have filled all details in street,block,building,city,zip code,state,country.
    But still i am not getting anything displayed in the address field.
    Kindly help me in resolving this issue.

    Open Administration  -> Setup -> Business Partners  -> Address Formats Window.
    Check if you have the address format for the Country available in this window

  • After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

    After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
    <Email Edited by Host>

    Welcome to the Apple Community.
    I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    Apple Topluluk hoş geldiniz.
    Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
    Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
    Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
    Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
    Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
    Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

  • Create Blank Signature Field in Acrobat 8

    The create blank signature field function is no longer available in Acrobat 8.0, as it was in 6.x and 7.x. This was an extremely useful tool to add a quick signature block to a document you needed digitally signed by another party.
    Adobe LiveCycle Designer does have the ability to add the field, but that requires additional steps to convert the document to a form when a forms functionality is truly unnecessary for a simple signature capture.
    Please, add this capability back to the native Acrobat program. We have hundreds of users who use this functionality daily.

    Jeff,
    You are right it is not as it used to be in Acrobat 6 and 7, but it is still there! 
    Go to Tools->Forms, and select the Digital signature tool. 
    A cross will show up, and you can use t for placing your new and EMPTY signature field 
    Tal 
    [signature deleted by host]

  • Email link with no address field.

    Greetings~
    I'm trying to make a button that when clicked on opens an email client with an empty address field but a filled subject and body, but have no idea where to begin.
    The idea is that I have a "Refer me to your friends!" button, so when the user clicks it, it opens an email with the subject "Sairus is awesome" and a body filled with propaganda. The address field must remain blank so they can add in the friend's address they wish to send.
    For the moment I'm working with the below, however obviously enough the address is being filled in. Hoever, despite the seemingly correct code, the subject and body are remaining empty. I'm using Flash 8, is the syntax different in my version?
    on (release) {
    getURL("mailto:[email protected]?subject=Sairus is awesome&body=The following 50 reasons explain why Sairus is awesome:");

    I've been testing it on a server all the time ( http://www.brightwork.com/~staging2/info ) to no avail. Of course now that I've made a forum post about it, the link is populating an email grand without any changes.
    However, my main problem is still there, how does one make an email with an empty "to" field?

  • Address Fields Configuration

    Can someone confirm if we can change the Address field configuration in OOD R16? We want to remove Address Line 3 from the Address block? If yes, can you tell me how its done?

    Address is like an object on it own. it is not possible to change it currently.

  • Address fields - Newbie

    People
    I can't find where I can customize the Address field. In fact this field is a group o fields that changes depending of the country you choose from the pick list.
    I already find many countries with missing related field. For example Argentina, a vital field is Province, you can enter de city but not the province not even the state.
    Is there any way were i can customize this address objects?
    Thanks in advance
    Ruben

    Unfortunately there is no way that this can be customised. Personally i would suggest raising a Service Request around your issues but something like this would take along time to be deployed and would have to be done through a hotfix or next release.

  • Submitform as pdf mailto with cc and IBM Lotus inotes blank address

    I have a form with a standard button to send the entire pdf by mail. My mail client is IBM Lotus iNotes. When I include a cc variable or two address in the address field, both address and cc field is left blank in inotes when it opens. I have adobe professional 9.0 and IBM Lotus iNotes 8.5.2. This is my button javascript code on its click event:
         var address1 = "[email protected];[email protected]" ;
         var subject1 = "My Subject";
         var body1 = "My Body";
         var cc1 = "[email protected]" ;
        event.target.submitForm({cURL:"mailto:" + address1 +"?subject=" + subject1 +"&body=" + body1 + "&cc=" + cc1 + "",cSubmitAs:"PDF",cCharset:"utf-8"});
    If I try with outlook as mail client, it works perfectly. It seems a inotes bug. Doesn't it?
    Thank you in advance.

    I think it's an iNotes problem. I've compared both urls created while is launching iNotes and when cTo: has one single address, the url presents the SendTo field filled, but when cTo has two address, there is no SendTo field in the url.
    Url single address:
    http://mailserver/mail/box0592.nsf/($Drafts)/$new/?EditDocument&Form=h_PageUI&PresetFields =h_EditAction;h_New,s_NotesForm;Memo,s_FromCtrl;1,Subject;Asunto%20de%20prueba%20,SendTo;d ir1%40cajarural.com,Body;Cuerpo%20de%20prueba,h_AttachmentNamesAlt;%22formulario%2520prueb a%2520ver%2520si%2520funcionan%2520direcciones%2520correo%2520notes%2520grabable.pdf%22%3B %22C%3A%5CDOCUME~1%5CU970592%5CCONFIG~1%5CTemp%5CDomino%20Web%20Access%5Cupload%5C35%5Cfor mulario%2520prueba%2520ver%2520si%2520funcionan%2520direcciones%2520correo%2520notes%2520g rabable.pdf%22,h_AttachmentLengthsAlt;45930,s_AttachmentTimesAlt;20120906T071041Z
    Url with two address
    http://mailserver/mail/box0592.nsf/($Drafts)/$new/?EditDocument&Form=h_PageUI&PresetFields =h_EditAction;h_New,s_NotesForm;Memo,s_FromCtrl;1,Subject;Asunto%20de%20prueba%20,Body;Cue rpo%20de%20prueba,h_AttachmentNamesAlt;%22formulario%2520prueba%2520ver%2520si%2520funcion an%2520direcciones%2520correo%2520notes%2520grabable.pdf%22%3B%22C%3A%5CDOCUME~1%5CU970592 %5CCONFIG~1%5CTemp%5CDomino%20Web%20Access%5Cupload%5C12%5Cformulario%2520prueba%2520ver%2 520si%2520funcionan%2520direcciones%2520correo%2520notes%2520grabable.pdf%22,h_AttachmentL engthsAlt;45972,s_AttachmentTimesAlt;20120906T071217Z
    These urls are built by iNotes I suppose and iNotes doesn`t work properly in this matter.

  • Which e-mail sender address field is checked for restricted ePrint?

    If I restrict ePrint to only accept print requests from certain e-mail addresses: Which e-mail address field of the incoming e-mail is checked?
    a) E-mail message header From:?
    b) E-mail message header Sender:?
    c) SMTP MAIL FROM: (the sender address on the "SMTP envelope")?
    Thanks

    Hi Christob,
    If you are selecting Allow Senders Only under ePrintcenter.com.
    Then you have to put in the email address of the people who can send jobs to your printer via ePrint.
    Example:- If your friend wants to send an email to your printer and you have selected allow senders only.
     You will have to have his email address in there (the email address from which he is going to send an email) for him to send an ePrint Job to your printer.
    I hope this answers your question, if you have any question please let us know.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Mail skips from address field to subject field mid-typing

    Sometimes -- maybe one out of fifty times – when I'm typing an address in the address field of a mail, a comma is automatically inserted and the cursor jups down to the Subject line, where I finish typing the addressee.
    I then have to erase the Subject line, return to the Addresee line, remove the comma and finish the address.
    This is really annoying but intermittent.
    And it's been happening for over a year.
    Can anybody help?

    That is done by a JavaScript on the (Google) page to set focus to the search bar.<br />
    You can stop the loading with the ESC key or set a blank page as the startup page and click the Home button if you want the Home page to appear.
    Tools > Options > General > Startup: "When Firefox Starts": "Show a blank page"
    See also [/tiki-view_forum_thread.php?forumId=1&comments_parentId=193980]

Maybe you are looking for