Check-In a new created projekt (CAF-Project)

Hi everybody,
we use NWDI and want to check-In a new created project (CAF-Projekt). we get always the following error message:
FAILED: CHECKIN on activity act_w_FPMX_failed :
The operation was aborted because: Project "fpmx.fe_cafproject": Generated code is not in sync with the model.
Regenerate the project before check-in.:operation failed at13:33:04.607
What could be the problem, is the NWDI not configured correctly?
We have no problems with other prjects like Web Dynpro...
Any help will be greatly appreciated!
regards,
Sid

Hello Sid
I see you have closed this thread, so i assume it is answered.
Thanks
Kenny

Similar Messages

  • How to inactive checking available budget when creating reservation

    Dear SAP Guru,
    Need your advice in how to inactive checking available budget when creating reservation under Project system and Investment management module
    Many thanks in advance.
    Nies

    ok

  • Sharing CAF Entity/Application Service to Other CAF Project ?

    Hello,
    Currently we don't have NWDI in place and only doing local development;
    ie, using local DC's. Now we'd like to contain all CAF Entity Services
    and related Application Services in one CAF Project (CAF_BASE) and
    create other CAF Project (CAF_APP) to refer to these exposed
    Entity/App Services.
    I tried to add all entities of types [Common Model] and [Java Package Tree]
    to one Public Part  (PP01) in DC of Project CAF_BASE. In DC of Project
    CAF_APP, I included PP01 as a used DC.
    Still those Entity/App Services in CAF_BASE are not shown in CAF_APP.
    Is this by design or I did it the wrong way ?
    Ying-Jie Chen

    Hi Francesco,
    From SAP Help (see URL below),
    http://help.sap.com/saphelp_nw2004s/helpdata/en/32/07c93f26903a1ce10000000a114084/content.htm
    A statement is specified :
    >>> Start-of-SAP-Help
    Restrictions for Relations
    The following restrictions apply for relations between entity services:
         Relations between entity services can only be unidirectional. A bidirectional relation has to be modeled as two unidirectional relations.
         Entity services can only refer to (relations and inheritance):
          Other entity services of the same project
          Core entity services
         Entity services can only reference other entity services.
    <<< End-of-SAP-Help
    It says that a entity service can only refer to other entity services in the
    same project so there is no way for us to share entity services between
    projects.
    FYI,
    Ying-Jie Chen

  • Problem while creating CAF project in NWDS workspace

    Hi Experts,
    We are facing a problem while creating CAF project in NWDS workspace. Even though we have tried in new workspace we are facing the issue. Find the below build error.
    We are not getting any error when we build from CBS.
    [javac] ERROR: C:\sap\test_VC_DC.jdi\0\DCs\test.com\ja\bl\journal\ejbmodule\_comp\src\com\test\ja\bl\journal\modeled\ModifyJournalLineItemRequestMessage.java:7: cannot find symbol
    [javac] ERROR: symbol  : class JournalLineItemDetail1
    [javac] ERROR: location: package com.test.ja.cm.util.modeled
    [javac] ERROR: import com.test.ja.cm.util.modeled.JournalLineItemDetail1;
    when we expand com.test.ja.cm.util.modeled there is no file with name JournalLineItemDetail1 and the actual file exists is JournalLineItemDetail but we are not able to understand why 1 is appending to the file JournalLineItemDetail. Can somebody throw some light on this?
    Regards,
    Pradeep

    Have you checked out the topics at the right in the More Like This section?
    OT

  • Check Condition when to create Project

    Dear expert!
    Now, I'm getting some issue about Checking condition when to create project.
    - When I create a project with coding mask '-XXXX-00-00-00-00-000' I want company code to have value 1000. If I enter another company code then the system will display message "you have to enter company code is 1000"
    Really, I don't know how i have to do.
    Help me, please!
    Best regards, Huy!

    Dear, Search the forum, this type of queries are raised many times before....Search it you will find it....
    Also, before posting any questions please search the forum, if you dont find it then you create a new thread.

  • I am getting the following error when i am trying to check in new created content profile

    Hi All,
    I am getting the following error when i am trying to check in new created content profile as:
    An error has occurred. The stack trace below shows more information.
    !csUserEventMessage,weblogic,localhost:16200!$!csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$!syParameterNotFound,dDocTitle
    intradoc.common.ServiceException: !csServiceDataException,CHECKIN_NEW_SUB,validateStandard!$
    *ScriptStack CHECKIN_NEW_SUB
    3:doScriptableAction,**no captured values**3:doSubService,**no captured values**CHECKIN_NEW_SUB,**no captured values**3:validateStandard,dDocName=myucm-005202
      at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
      at intradoc.server.Service.buildServiceException(Service.java:2260)
      at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
      at intradoc.server.Service.createServiceException(Service.java:2249)
      at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1766)
      at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1716)
      at intradoc.server.Service.doAction(Service.java:477)
      at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
      at intradoc.server.Service.doActions(Service.java:472)
      at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)
      at intradoc.server.Service.executeSubServiceCode(Service.java:3866)
      at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
      at intradoc.server.Service.executeServiceEx(Service.java:3861)
      at intradoc.server.Service.executeService(Service.java:3845)
      at intradoc.server.Service.doSubService(Service.java:3760)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
      at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
      at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
      at intradoc.server.Service.doCodeEx(Service.java:550)
      at intradoc.server.Service.doCode(Service.java:505)
      at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
      at intradoc.server.Service.doAction(Service.java:477)
      at intradoc.server.Service.doScriptableAction(Service.java:3807)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
      at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
      at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
      at intradoc.server.Service.doCodeEx(Service.java:550)
      at intradoc.server.Service.doCode(Service.java:505)
      at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
      at intradoc.server.Service.doAction(Service.java:477)
      at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
      at intradoc.server.Service.doActions(Service.java:472)
      at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
      at intradoc.server.Service.executeActions(Service.java:458)
      at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
      at intradoc.server.Service.doRequest(Service.java:1890)
      at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
      at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
      at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
      at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
      at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
      at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
      at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
      at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
      at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
      at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
      at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
      at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: intradoc.data.DataException: !syParameterNotFound,dDocTitle
      at intradoc.data.DataBinder.getEx(DataBinder.java:1251)
      at intradoc.data.DataBinder.get(DataBinder.java:1050)
      at intradoc.server.DocServiceHandler.validateStandard(DocServiceHandler.java:1257)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
      at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
      at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
      at intradoc.server.Service.doCodeEx(Service.java:533)
      at intradoc.server.Service.doCode(Service.java:505)
      at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
      ... 79 more

    Your error states:
    !syParameterNotFound,dDocTitle
    Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
    Eventually, you should have a successful check-in.
    Hope this helps,
    -ryan

  • This script is not checking the existing of the new created item

    Dear Friends
    I have This script is not checking the existing of the new created item I am using this script in side WHEN-BUTTON-PRESSED trigger
    I am using oracle Forms [32 Bit] Version 6.0.8.11.3 (Production)
    My script as the following :
    BEGIN
    BEGIN
    SELECT ITEM_CODE INTO :GLOBAL.DUMMY
    FROM IM_INVENTORY
    WHERE ITEM_CLASS = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_CLASS)))
    AND ITEM_TYPE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_TYPE)))
    AND ITEM_LENGTH = :IM_NEW_ITEMS.ITEM_LENGTH
    AND ITEM_WIDTH = :IM_NEW_ITEMS.ITEM_WIDTH
    AND ITEM_HIGHT1 = :IM_NEW_ITEMS.ITEM_HIGHT1
    AND ITEM_HIGHT2 = :IM_NEW_ITEMS.ITEM_HIGHT2
    AND COLOR_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.COLOR_CODE)))
    AND SHAPE_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.SHAPE_CODE)));
    -- get_err_message(87);
    SHOW_MESSAGE('This Item Already Exist !!!');
    RAISE FORM_TRIGGER_FAILURE;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    show_message('here');
    INSERT INTO IM_INVENTORY
    (ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
    ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
    ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
    OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
    VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
    :IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
    NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
    0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
    standard.commit; -- NEW COMMITED
    clear_message; -- NEW COMMITED
         WHEN FORM_TRIGGER_FAILURE THEN
         SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    WHEN OTHERS THEN
    SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    END;
    END;
    Waiting for your valuable answer .
    Best regards
    Jamil Alshaibani

    Hi,
    I have written the script also with constants values but still it is not going to
    SHOW_MESSAGE('This Item Already Exist !!!');
    and the script is written as the following :
    BEGIN
    SELECT 1 INTO :GLOBAL.DUMMY
    FROM IM_INVENTORY
    WHERE ITEM_CLASS ='110'
    AND ITEM_TYPE ='110105'
    AND ITEM_LENGTH = 1
    AND ITEM_WIDTH = 1
    AND ITEM_HIGHT1 = 1
    AND ITEM_HIGHT2 = 0
    AND COLOR_CODE = '3001'
    AND SHAPE_CODE = '201' ;
    SHOW_MESSAGE('1- This Item Already Exist !!!');
    RAISE FORM_TRIGGER_FAILURE;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    show_message('here');
    INSERT INTO IM_INVENTORY
    (ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
    ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
    ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
    OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
    VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
    :IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
    NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
    0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
    standard.commit; -- NEW COMMITED
    clear_message; -- NEW COMMITED
         WHEN FORM_TRIGGER_FAILURE THEN
         SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    WHEN OTHERS THEN
    SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    END;
    Best regards
    Jamil

  • I am new at Captivate 8 and I have created a learning project using an existing power point presentation.  I have added a button that will allow my students to view a video on the subject.  When I run the project in Preview the button works but when I pub

    I am new at Captivate 8 and I have created a learning project using an existing power point presentation.  I have added a button that will allow my students to view a video on the subject.  When I run the project in Preview the button works but when I publish it, it stops working.

    I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server.   In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4".  If I run this from any browser it works.  So what do you think I have done wrong?

  • Problem in Building CAF project

    Hi All,
    I have imported an external service and wrapped it in an entity service. Whilie buiding th project i am getting the following error:
    "The project was not built since its classpath is incomplete. cannot find the class file for com.sap.caf.core.data.values.api.IMessageValue. Fix the classpath and then try rebuilding the project"
    Thanks in Advance
    Ashutosh Rastogi

    That's strange. Try the following:
    1. Build your CAF project. After that go to "General Output View", click on error compilation entry and determine the class name which has reference to the "com.sap.caf.core.data.values.api.IMessageValue" class. After that open this class from java Navigator view. Check that class name is MPConnector. Be sure that "com.sap.caf.core.data.values.api.IMessageValue" token is really exists in this class source code, but not "com.sap.caf.mp.core.data.values.api.IMessageValue".
    2. If you use default settings for location of your local development configuration (the path is following: "C:\Documents and Settings\<user>\.dtc\LocalDevelopment\DCs" ) I recommend you to change this path to "c:\dtc" for example. You need to change workspace to new one and change the dev configuration location.
    To change workspace go to : Window -> preferences -> Workbench -> Workspace
    To change dev config location: Window -> preferences -> Java Development Infrastructure -> Development Configuration
    After that try to create new CAF project and check the compilation.
    Best regards,
    Aliaksei

  • "A new folder for every project file"

    Aha!!  Right, from now on ... (thanks Steve)
    From the Muvipix.com Guide to Adobe PE11 by Steve Grisetti
    (p 36) [on starting and saving a new project]
    2     Click the Browse button to choose a location to save your new
    project file.
    We at Muvipix recommend always selecting the Browse option and,
    wherever you choose to save your file, creating a new folder for every
    new project file.
    This little bit of housekeeping keeps all of your new project's files in
    one neat, little folder. And, when your project is done and you want to
    clear it from your computer, you can then remove not only the project
    file but all of the temp, render and scratch disk files Premiere Elements
    has created for that project simply by deleting that single folder!
    This makes post-project clean-up a much easier and neater process.
    OK, hope I've got it this time (at last)
    cheers
    Brian

    Oh no!  I thought I’ll re-work that Canal video again, but this time saved the project from the very start in a new folder on an ext HD (500 GB) connected USB3.0.  Tried all sorts of things on it, saved each time in the same folder.   Cleared all 14 clips from Project Assets (which of course emptied the timeline).   Shut down PE11.   Checked via Windows Explorer that the project files were all on the ext HD – and by the way, there are no other files on it, just the PE files.  My understanding is that Advanced System Care Pro (Iobit) regularly defrags all my drives if necessary (tho’ I haven’t done this manually for months with this drive).
    OK, opened PE, went to Open Recent Projects, it shows the above .prel file and the entire path, I click on it and – 
    Weird, just weird
    Nil desperandum
    Brian
    Edited --- and another weird thing, my email isn't sending the complete message I type to this forum.   I sent a whole message once and it never appeared, but this time it's cut off half a sentence above (it did this before, earlier today).
    That sentence should read,
    OK, opened PE, went to Open Recent Projects, it shows the above .prel file and the entire path, I click on it and – nothing happened!   (You'll have gathered that's what happened, but I wrote it in my Windows Live Mail, sent via BT-Yahoo ISP ......... )  Hey wait, there was a whole lot more.
    Here's a copy / paste from Windows Live Mail outbox
    It’s so odd, because as I said previously, most of the time it works so well, does all the things it’s supposed to do.   I followed Steve’s instructions here to the letter.   By the way, as you know, it’s not just the ext HD, this has been happening all along with allowing PE to save everything in its default Folder 11.
    I would be – now – very sorry indeed to have to abandon PE11 simply on this account, but it’s causing me to waste such a lot of time.   (Let alone the expense of buying it, plust one Lynda.com course, plus 2 books – not forgetting that I’d previously tried the Corel software and bought a book and DVD for that too!!)
    Might just use – what’s that simplicity-itself thingy everyone uses who just want to get any old kind of thing up on You Tube ..........   Oi vey!! <<more weary sigh>>
    Weird, just weird
    Nil desperandum

  • Deployment error in CAF project with web service

    Hi,
    We are trying to deploy a CAF project in CE SP6 but we are getting warnings. The project gets deployed when no web services are created but when we create any web service and try to deploy we get the following deployment warning :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 22886750:com.sap.engine.services.deploy.container.DeploymentException:
         at com.sap.engine.services.webservices.server.deploy.WebServicesDeployManager.makeStartInitially(WebServicesDeployManager.java:693)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Can anyone please help?
    Edited by: Somnath Roy on Jul 30, 2008 2:20 PM

    Hi Roy,
                To best what i understand is that the clusterwide nested exception generally comes when you try to deploy a project or the method in the webservice which is already deployed. So please check if there is a redundant deployment due to which the error is being thrown.
    Regards
    Ashok

  • Howto Export and Import CAF project

    Hi,
    Is there a way to export and import my CAF projects to more than one installations of NWDS? I've tried different ways but the main problem is that I can't see the "imported" projects in the Composite Application Explorer of the CAF perspective in NWDS.
    The only way I've managed to do this is to create a new CAF project with the same name as the one I want to import and copy all files into the newly created structure but surely there must be an easier way to do this, or??
    Best regards,
    Mikael

    Does this solution still apply?
    I want to export a CAF project from NWDS 7.10 and import it into NWDS 7.20.
    If there are any breaking API-changes, this is no problem as I can fix it later.
    However I need to transport all BO and Service-Definitions and the (possibly outdated/deprecated) code.
    I cant get it working with your linked document.
    Any hint appreciated. Thanks alot!
    Kai

  • EjbModule not building for my CAF project

    Hi,
        This is my first CAF project . I have created few entity services and than when I try to build it it gives me the following error :
    ompile:
         [javac] Compiling 36 source files to C:\Documents and Settings\i028301\.dtc\LocalDevelopment\t\33C495AB7713C24C69FE621695764F50\classes
    C:\Documents and Settings\i028301\.dtc\LocalDevelopment\DCs\sap.com\kpcarpool\ejbmodule\_comp\ejbModule\com\sap\kpcarpool\besrv\car\CarServiceBean.java:178: cannot resolve symbol
    symbol  : method almostEqual (java.util.Date,java.util.Date)
    location: class com.sap.kpcarpool.besrv.car.CarServiceBean
                        if (!almostEqual(oldBE.getLastChangedAt(), be.getLastChangedAt())) {
                                         ^
    C:\Documents and Settings\i028301\.dtc\LocalDevelopment\DCs\sap.com\kpcarpool\ejbmodule\_comp\ejbModule\com\sap\kpcarpool\besrv\employee\EmployeeServiceBean.java:171: cannot resolve symbol
    symbol  : method almostEqual (java.util.Date,java.util.Date)
    location: class com.sap.kpcarpool.besrv.employee.EmployeeServiceBean
                        if (!almostEqual(oldBE.getLastChangedAt(), be.getLastChangedAt())) {
                                         ^
    C:\Documents and Settings\i028301\.dtc\LocalDevelopment\DCs\sap.com\kpcarpool\ejbmodule\_comp\ejbModule\com\sap\kpcarpool\besrv\travel\TravelServiceBean.java:171: cannot resolve symbol
    symbol  : method almostEqual (java.util.Date,java.util.Date)
    location: class com.sap.kpcarpool.besrv.travel.TravelServiceBean
                        if (!almostEqual(oldBE.getLastChangedAt(), be.getLastChangedAt())) {
                                         ^
    C:\Documents and Settings\i028301\.dtc\LocalDevelopment\DCs\sap.com\kpcarpool\ejbmodule\_comp\ejbModule\com\sap\kpcarpool\besrv\travellocation\TravelLocationServiceBean.java:171: cannot resolve symbol
    symbol  : method almostEqual (java.util.Date,java.util.Date)
    location: class com.sap.kpcarpool.besrv.travellocation.TravelLocationServiceBean
                        if (!almostEqual(oldBE.getLastChangedAt(), be.getLastChangedAt())) {
                                         ^
    4 errors
    The errors is same almostEqual not found. I am clueless why this error is coming. Can somebody help me in this regard.

    Hello,
    There is a bug in the IDE that causes code generation and compile errors when the directory structure for the source code is too deep.  Try changing your Development Configuration root folder to something like "c:\.dtc" and then create a new project and build.  Window->preferences->Java Development Infrastructure-> Development Configuration Pool.  Now all new projects should be stored in this new directory.
    If this does not work, you can also try moving your default workspace to "c:\ws".  Windows->preferences->workbench->workspace.  You must restart your IDE after you do this.
    Regrards,
    Austin.

  • VSTO-Excel-Application: Check for available new version prior to launch

    Although VSTO doesn't provide anything for checking for a new available application-version (VSTO Excel-Document-Level-Customization)
    prior to launching the app (but this check outside the VSTO-Application itself obviously isn't possible) I would like to know if there is a better way to handle this whole procedure.
    I'm using a .Net-Application which launches Excel first, checks if all environment-parameters are ok and if so, then it eventually launches the VSTO-Application. While performing the VSTO-launch I check for an available update  - if so, the Workbook
    will be closed, the update will be executed silently and the VSTO-Application will be restarted. It works, but it is quite complicated and this method is not really nice.
    So my question is: Is there a possibility to perfom the VSTO-Update from the Startup-Application without initially launching the VSTO-Application and so avoiding the launch of the VSTO-Application just to check if there's an available update.

    Although VSTO doesn't provide anything for checking for a new available application-version (VSTO Excel-Document-Level-Customization)
    prior to launching the app (but this check outside the VSTO-Application itself obviously isn't possible) I would like to know if there is a better way to handle this whole procedure.
    I'm using a .Net-Application which launches Excel first, checks if all environment-parameters are ok and if so, then it eventually launches the VSTO-Application. While performing the VSTO-launch I check for an available update  - if so, the Workbook
    will be closed, the update will be executed silently and the VSTO-Application will be restarted. It works, but it is quite complicated and this method is not really nice.
    So my question is: Is there a possibility to perfom the VSTO-Update from the Startup-Application without initially launching the VSTO-Application and so avoiding the launch of the VSTO-Application just to check if there's an available update.
    Hello,
    Based on your description, it seems that you want the add-in check updates before the add-in loaded.
    Right?
    If so, you could select Check every time the
    customization runs, and that should solve your issue, because it will check updates before the add-in loaded.
    You could refer to the loading process from
    https://msdn.microsoft.com/en-us/library/zcfbd2sk.aspx?f=255&MSPPError=-2147217396, sepcially the step 6.
    The following steps occur when a user opens a document that is part of a Microsoft Office solution.
    The Microsoft Office application checks the custom document properties to see whether there are managed code extensions associated with the document. For more information, see
    Custom Document Properties Overview.
    If there are managed code extensions, the application loads VSTOEE.dll, which loads VSTOLoader.dll. These are unmanaged DLLs that are the loader components for the Visual Studio 2010 Tools for Office Runtime. For more information, see
    Visual Studio Tools for Office Runtime Overview.
    VSTOLoader.dll loads the .NET Framework and starts the managed portion of the Visual Studio Tools for Office runtime.
    If the document is opened from a location other than the local computer, the Visual Studio Tools for Office runtime verifies that the location of the document is in the
    Trusted Locations list in the Trust Center Settings for that particular Office application. If the document location is not in a trusted location, the customization is not trusted, and the load process stops here.
    The Visual Studio Tools for Office runtime installs the solution if it has not been installed yet, downloads the most recent application and deployment manifests, and performs a series of security checks. For more information, see
    Securing Office Solutions.
    If the customization is trusted to run, the Visual Studio Tools for Office runtime uses the deployment manifest and application manifest to check for assembly updates. If a new version of the
    assembly is available, the runtime downloads the new version of the assembly to the ClickOnce cache on the client computer. For more information, see
    Deploying an Office Solution.
    The Visual Studio Tools for Office runtime creates a new application domain in which to load the customization assembly.
    The Visual Studio Tools for Office runtime loads the customization assembly into the application domain.
    The Visual Studio Tools for Office runtime calls the Startup event handler in your customization assembly. For more information, see
    Events in Office Projects
    If that is not the one fits your requirement, then I am afraid that it is impossible to get update before the add-in loads, because we could call
    ClickOnce Api but there is no such event to call that api.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I create a NetBeans project with multiple JavaFX (FXML) dialogs?

    I'm very new to Java and JavaFX, so forgive what is probably a question asked a thousand times, but I can't seem to find the answer.
    I come from a Visual Studio (C# with WPF) background. I'm used to creating a Solution then adding a Project for each dialog/window that gets included in the Solution. Each dialog/window is a class derived from Window, and I simply create an instance of that class when I need to use the dialog.
    What I need to do is have a main window (stage) that contains two lists of participants (a red team and a blue team).
    Then I need a separate dialog for entering the information for the participant. So when a button on the main stage is pressed ("Add Red Participant"), I want to open the ParticipantDialog. When the "OK" or "Close" button on the Participant dialog is clicked, I want the dialog to be able to return a participant object to the main stage.
    Then the main stage adds that participant to the appropriate list.
    What I've gathered so far is that I will be creating an FXML file for the Participant dialog (and I assume an associated controller). Then when the "Add" button is pressed, I will call an FXMLLoader to load that FXML dialog. Something like this:
    FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("ParticipantDialog.fxml"));
    Scene scene = (Scene)fxmlLoader.load();
    final Stage participantDialog = new Stage();
    participantDialog.setScene(scene);
    First question is: is that correct so far? Am I at least on the right track?
    Next question is: how or where do I create the FXML and controller files for the participant dialog using NetBeans? Should I create a separate project to make the participant dialog and then copy those files over, or is there a way to make the files within the parent project? And if I make the participant dialog in a separate project, what's the easiest way to access it from my main stage?
    I feel like I'm missing something simple here because this seems a lot harder than it should be.
    Thanks in advance for any advice.

    >  is that correct so far?
    Yes the sample code you have is fine to launch a new dialog when your Add button is pressed .
    > I create the FXML and controller files for the participant dialog using NetBeans?
    You can edit FXML text in NetBeans, but I think that is kind of tedious.
    You might want to create the FXML using SceneBuilder.
    You can use SceneBuilder in NetBeans.
    You may want to get it working without FXML first.
    For example, use the JavaFX scene graph API, then convert your program to use FXML once you are more comfortable with the JavaFX system.
    The piecemeal approach cuts down on the amount of learning you need to do at one time.
    > Should I create a separate project to make the participant dialog and then copy those files over.
    No.
    Just use a single NetBeans project.
    You will have separate FXML files for your main stage and your participant dialog, but they will both be placed in the same NetBeans project.
    > is there a way to make the files within the parent project?
    In NetBeans 7.3.1, do the following:
      File | New Project | JavaFX | JavaFX FXML Application
    This will create a sample project with a sample fxml file.
    Modify the sample project files to get what you want, changing the sample fxml to your main stage fxml and adding a new participant fxml to the same directory.

Maybe you are looking for