Check-in/out files only works some of the time

My office recently upgraded to CS6 from CS5.5. I am able to connect to the web server successfully and can sometimes check in and check out a file without problems but most of the time I keep getting an error message that the file activity is incomplete. It says I am connected to the server but "An FTP error occurred--cannot put (name of file). Access denied. The file may not exist, or there could be a permission problem. Make sure you proper authorization on the server and the server is properly configured." I have also gotten the message "553 permission denied."
I have noticed that when I take out what I have in the root directory and leave it blank it works. However, I have to have something in the root directory first, try to check in or out a file, and then take it out in order for it to work; I cannot leave the root directory field blank at all times or else I get an error message. Is there a work around so that I do not have to keep editing the site root directory every time? Any suggestions would be greatly appreciated.

Thank you for your reply. There are three of us that use Dreamweaver and they are unable to check-in/out with CS6. They are using our older version of Dreamweaver with no problems. The settings were given to me by my IT department. Dreamweaver is not supported by IT and they cannot offer me any additional help. I saw in another discussion to take out the first / in the root directory but it is needed in order me to successfully connect to the server. WinSCP is used for FTP. Please let me know if you need additional information. I really appreciate the help.

Similar Messages

Why does my Safari Auto-Fill only work part of the time?

First of all, why isn't there a link on the Apple website to provide Feedback? Secondly, I'd love to know why my Safari Auto-Fill only works some of the time, like when entering Sweepstakes information. I realize some websites don't allow Auto-Fill, but on the ones that do, I can't get the second window to open up when I click "Auto-Fill".

Safari 6.1.1 and yes all web forms are checked under Preferences Auto-Fill. I am daily entering sweepstakes for the HGTV dream home, and even though the initial bubble shows up "Auto-Fill your contact information" shows up, when I click on it, the second bubble that lets you confirm the info doesn't always open. I tried it just now in a separate tab, and it opened; then I came back here to write some of the message. Then I went back to try again and it won't open. It drives me crazy. I keep trying with each new data field and sometimes the second bubble will open further down the page.

Website Only Opens Some of the Time

Hi
The website www.defencejobs.gov.au will only open for me occassionally. I would say probably 80-90% of the time Safari will not be able to contact the server. There are no other complaints on the internet to suggest this website is problematic. It's the same on my iPhone, or atleast until I turn wi-fi off. There are no problems accessing the site on 3G. I did the basic things that Safari suggests such as empty the cache and reset Safari but to no avail. Oh, and all my software is up-to-date. Any Ideas?
Thanks

No problems here, though it's loading quite slow. There are 51 items being loaded on the front page.

8ik, keys only work 10% of the time on my chromebook

Version 39.0.2171.96
Platform 6310.68.0 (Official Build) stable-channel nyan_blaze
Firmware Google_Nyan_Blaze.5771.63.0
I bought my father a chrome book for xmass from bestbuy and the keyboard keys 8ik, arn't working 90 percent of the time. Im looking to get this problem to work.

Hi @nathan2484 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Chromebook and issues with keys sticking. You can power the Chromebook down by pressing the power button for 20 seconds. Then pressing it again to restart it.
Here is a link to help adjust the keyboard input on your Chromebook.
You could reinstall Chrome OS which takes it back to factory settings. Make sure you back up all data or it will be lost.
You can contact Chromebook here.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My Display Only Works Part of the Time and Apple Care Won't Help Me (Long)

I bought my computer at a discounted price because it was a restocked item, but was it really worth it? I'm beginning to think not. I saw that it had one stuck pixel, but saving that much money on such an expensive computer, the pixel hardly seemed like a travesty. However, I think I've discovered the real reason why the last owner gave up such a seemingly exceptional piece of hardware...
After about a month of flawless operation my "new" computer started to act a little strangely. It wouldn't always go to sleep when it was scheduled, the screen saver wouldn't always come on by itself...things that I though a simple PRAM reset, SMC reset, or disk permission repair would fix. After countless attempts at all three "fixes" I was still having problems...a few days after these problems started occuring something even more drastic happened: My computer would turn on (the little light would come on, I'd hear the fans start running and the start up tone) but the screen would remain black. I tried several PRAM and SMC resets as suggested on this forum, but the screen continued to come up black for about an hour. That's when I called Apple.
The Apple Care specialist on the phone asked me for the serial in which I had to lift the computer up to get (since I obviously couldn't read it off the screen). She suggested an SMC reset which, I explained to her, I had tried already but it hadn't worked, however, I was willing to give it another shot. Oddly (and rather annoyingly) enough it worked, and for a short amount of time I was happy...until it happened again...another call to Apple...and again...and about 3 or 4 calls to Apple Care later, they suggested that I go in to an Apple Store to have it looked at.
The Apple Specialist made an appointment with me to meet with an Apple Genius the next day at 4:30PM at a store about a mile away from my house. The next day I lugged my 24" iMac through the local mall (I'm female, 5'2", and I weigh about 108 so it wasn't too easy of a feat) to discover the apple store was CLOSED for the next few days so that they could "make the store better." I called Apple Care on my cell phone right there in the mall and asked them what was going on. Didn't they know that this Apple Store was closed? The man I was talking to said that they knew and he wasn't sure how the person I had talked to just the day before had signed me up for an appointment when he hadn't even asked for my e-mail address. It was most bizarre. This man made an appointment with me for later that same day at an Apple Store about 45 minutes away from where I live. I didn't want to go, but I'm a college student and I was a desperate for my computer to work again.
Shaking around in that box must have brought it out of it's strange seized-up state because as I brought it out for the Mac Genius to look at it turned on for him no problem. Quite a frustrating problem because it's so spontainious that it keeps making me look like either a liar or a fool. He said he'd run an 8-hour diagnostic check on it and I could pick it up the next day. So the next day I waited for their call but I got none. I called them and they said that they were still running tests and it'd be ready the next day. The day after, about an hour and a half before I had to go to work, they called me and told me my computer was ready. They said they had ran a 24-hour diagnostic and everything was working fine but they said they'd run more tests if I wanted them to. I'm a full-time college student and I need my computer for just about all of my classes, so I declined more tests and told them I'd pick it up right away. I dashed over there to pick it up and dashed back as fast as I could (and I even made it to work on time...but just barely). Later that night I found that they had accidentally left their diagnostics CD in my computer (I called them about it and they said that would like it if I would bring it back...I still haven't mailed it).
All was fine and good (well, just okay...it still had problems with its sleeping and screen-savering) with my computer until yesterday. I got that black screen again upon start up....but this time my "fixes" worked after a few tries. There were no more problems for the rest of yesterday.
However, today I came home from school and go to start up my computer and the screen turned on and I saw the little mac symbol and that little circle of bars...but then it froze. I held in the little button to force a shutdown and when I started it back up again I was greeted by my good old friend, Mr. Black Screen. Just wonderful. I tried my "fixes" but today I didn't get lucky. So while I was holding in the button to start up my computer (again) and give it another go, I held it longer than I was supposed to and the little on light began flickering. Then I heard this unpleasant tone that lasted a few seconds before stopping and treating me to the startup sound. This time the screen turned on. Yay! I go to call Apple to find out what I had just done, and I find out that my 90 days are up and unless I wanted to pay $50 for them to be puzzled by my issue once more or give them $300 for not quite 3 more years of service, I'd have to lug my computer to an Apple Store or post here to get help. Thanks a lot Apple Care.
My "new" computer cost me almost $3,000. It should work the way it's supposed to. I need it to last me no less than 6 more years, but with the problems I've had with it in the first 3 months (which seem only to be getting worse and more frequent), I don't know if I'm expecting WAY too much out of it. I've been a loyal Apple user for 13 years and out of the 5 computers I've had in that time I've never had so many problems (actually I've never had any problems, at least nothing really serious; I'd never even called Apple Care before this). I'm a fairly experienced user (I'm not a Mac Genius or anything, but I know the ropes) and I am sure this is not normal behavior for an Apple computer (or any computer of that matter).
I'm so frusterated I'm not sure what to do. What's wrong with my computer? How can I get Apple to help me? How can I get Apple to even believe me? Any advice would be greatly appreciated and thank you so much for reading my very long (and rather dramatic) story.

Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

Satellite L500: WLan drops out and doesnt work most of the time

hi everyone, i have a toshiba satellite L500 running windows 7. have been using iprimus internet, wirelessly, no problems for a few weeks,before that, was using it via ethernet cable as i didnth ave a wireless modem. my laptop was off charge the other night and went flat, next morning when i woke up and turned it on, it wouldnrt connect to the internet.. after hours and hours of phone calls to iprimus, and numerous winsock resets, ethernet cable testing, and modem resetting, they tell me that the problem is within my laptop...
So i rang toshiba.. and they got me to go into device managers, and then network adapters, and disable, actually uninstall the wireless drivers, then reinstall.. and it worked.. finally... (forgot to add with all the iprimus confusion someone had reset my passowrd and i had to configure that to the laptop..
so anyway, after all these calls, i did a complete restore of the laptop, and wiped everything and reinstalled it all, and therefore reinstalled the modem. this time in modem setup it was telling me the wireless network adapter was unplugged, and would only let me set it up via ethernet..
now earlier today i did have the internet.. but it dropped out randomly.. webpages will go slow, sometimes it will reconnect, other times it wont. now i thougbht i might try and uninstall and reinstall the modem again,s ame error, and this time, cant get on wirelessly at all.
ive googled to see if others ahve had this problem.. and seeing what other people wrote, i went into my battery settings, and checked the WLAN didnt go into sleep mode etc, and ive also checked everythings enabled. ive no idea what to do,, neither iprimus or Toshiba will give me any anwers, both companies are just blaming each other lol
so i
it does appear to be my laptop, as all lights are on modem.. and iprimus keep telling me its not registering with them ( the disconnections) so it must be my wireless. though everytime my laptop dropped out of internet, so would my bfs iphone we were testing, and so did my other laptop which is partially stuffed but could normally still connect to the net.. so thats telling me its a modem problem.. ive no idea what to do.. and cant keep this via ethernet on the bench in this new hosue ive moved into,as with 2 kids under 3, thats just asking for trouble..
anyone have any suggestion??
thanks in advance

wel after many more phone calls to iprimus, i finally found a helpful indian, who ran me through the modem setup AGAIN like everyone else has, this time in its security settings, he got me to change the wireless signal channel from 2 to 9, said that would improve the signal, every other person when explaining the issues i was having, always told me to set it on 2.. so this has improved it dramatically in the day, but at night, particulary around 830pm, it drops out over and over and over...
would this just be a faulty modem, and perhaps buying oen from a harvery norman etc would be better?? or could it just be iprimus as a whole with there wireless coverage? im not in an iprimus area, theyve borrowed the lines of telstra or something.. so im on a crappier plan in this new house, and dont have adsl2 just 1500 speed. would this have anythign to do with the poor reception, or perhaps is there something in my house interfearing, or in my neighbors house? there is a satelite here, but no actual foxtel connected, looks as though it has been before. there is also an alarm here, not in use though.. ive not even seen if it turns on..

Xev/xmodmap only working part of the time [resolved]

Ok guys, maybe its just my mind playing tricks on me at 1am, but...
I bought a new laptop. Been trying to get it setup (I even made a wiki page for it in hardware->laptops), and tonight I tackled accelerated 3D, suspend to ram, and function keys (multimedia keys). Which brings me to this post...
The nice, easy way of setting it up through XFCE4 or keytouch wasn't recognizing all of my keys, so I turned to xmodmap.
First off, the kernel isn't recognizing all of them. No biggie, I figure we'll play around with evdev and scripting later.
So ... the ones that do work... well they're producing keycodes in xev! Great!
Made my xmodmap file
Ran /usr/bin/xmodmap $HOME/.Xmodmap
Voila! xev is now showing me keysyms! On to setting them up through XFCE, right?
Wrong.
I decided to clean up a bit, and restarted X just for the heck of it.
Now, my xev is not producing keysyms. Not even showing me keyCODES anymore.
Where before it was printing your normal output, similar to
KeyRelease event, serial 31, synthetic NO, window 0x2a00001,
root 0x87, subw 0x0, time 2557948, (314,172), root:(945,537),
state 0x50, keycode 174 (keysym 0x0, same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
(before xmodmap it was null, after it showed the keysym as well) (i just hit a letter and copied/modified this, its not EXACTLY right, since now everything is screwed up)
now it is showing me
KeymapNotify event, serial 31, synthetic NO, window 0x0,
keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FocusOut event, serial 31, synthetic NO, window 0x2a00001,
mode NotifyGrab, detail NotifyAncestor
FocusIn event, serial 31, synthetic NO, window 0x2a00001,
mode NotifyUngrab, detail NotifyAncestor
for the same keys.
This happened the other day, and I just rebooted a few times and it went away. Came right back tonight though.
I'm not really sure what to do with this one.
Ideas?
Last edited by drewbug01 (2008-02-02 08:28:58)

Hello there,
It may be that these keys are generating scan codes that X does not translate into key codes. If X doesn't get the key codes, it cannot do any type of key mapping with xmodmap. I had a similar problem with my Dell Inspiron 9300. Certain keys did not get translated by X. To solve this problem I did the following:
1. Figure out the scan codes for the keys that do not generate X key codes. There is a console program around that lets you do this, but I can't remember it for the life of me. Surely if you google you will find it. I think I recall finding it in an article about setting up these extra keys on Dell laptops, but I'm not sure.
2. Use setkeycodes to map these scan codes to key codes that X can use. In my case, I added the following to my rc.local file to always map the scan codes on boot:
# Map the Fn+F1 (Hibernate) key
setkeycodes e00a 123
# Map the Fn+F3 (battery) key
setkeycodes e007 120
3. Use xmodmap to map these key codes to a key symbol you can use.
4. Use xbindkeys (or whatever the XFCE equivalent is) to map these keys to your desired action.
I hope this gets you pointed in the right direction. Good luck.
jay

Custom 404 error page only works 75% of the time

I have made custom HTTP error pages for my app and they work for Mozilla, Opera and Firefox but IE seems to have its own personal 404 error page.
Anyone know how to make IE work and play well with others and display the custom 404 page like the other 3 browsers do? I did clear the IE cache, twice.
The environment is Tomcat 5.0.19 (stand-alone, no IIS) running on Window Server 2003 Enterprise
Thanks for your help!
Will

You got to love microsoft products huh. Microsoft has turned on its friendly error pages. Unfortunately, to fix this, you have to have your clients modified their browser settings. Inside the IE browser, do the following:
1. From menu choose tools->internet options
2. Choose the advanced tab
3. Uncheck the checkbox that says "Show friendly HTTP error messages"
That will do it for ya.

Panasonic DMC-TS1 ... only works 1/2 the time

For the most part... when I plug in my TS1 to my iMac via USB with the SDcard still inside... and there is HD Movies on it, iMovie shows it and pulls up the import box. However sometimes nothing happens... the little drop down thing drops down when i open iMovie and says Looking for and shows it... but there isnt a import box after... only the iSight thing shows...
Anyone have any help?????

DarkZephix wrote:
For the most part... when I plug in my TS1 to my iMac via USB with the SDcard still inside... and there is HD Movies on it, iMovie shows it and pulls up the import box. However sometimes nothing happens... the little drop down thing drops down when i open iMovie and says Looking for and shows it... but there isnt a import box after... only the iSight thing shows...
Anyone have any help?????
(1) I do not use TS1, but you may merely need to restart your Mac and try again. If restarting does not correct the problem, one of the following may help you import more reliably.
(2) Use your Mac's  > Software Update... to make sure your iMovie is the latest version for your system. (I am using 8.0.5.)
(3) Re-read your TS1's User Guide manual directions to be sure you are following the directions on how to import your movies into you Mac.
If you are already pressing the "OK" button to confirm you are using the "PC" connection when downloading, try configuring the camera's "USB Mode" setting in the camera's "Tools/USB" menu so the default is "PC". See MistX's post in this thread for details:
http://discussions.apple.com/message.jspa?messageID=10910658#10910658
(4) If you are certain you are using the right camera techniques but STILL cannot import your video clips from your TS1 into iMovie, try downloading them to iPhoto as you would still images. This suggestion comes from this Apple iMovie Help article:
https://support.apple.com/kb/HT3290#3
Once in iPhoto, you can easily import your video clips to iMovie events from the iPhoto Videos link in your iMovie's Events Library - provided you comply with this article:
http://support.apple.com/kb/TS3124
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

I have an iPhone 4, and my charger only works half of the time and is bulged by the actual plug I'm spot. Will AppleCare cover this? If not what should I do?

Can someone please tell me what I need to do to use my AppleCare to replace my charger? And if I don't have my AppleCare info but have the email from when I activated it, is that all I need?

take it to an Apple Store genius bar ,let them decide the options

Home button dos not work some of the time on my iPhone 4

When the home button is used it doesn't always respond and it takes a number of press's to return to the home page, now a Friends phone has developed the same fault , is this a hardware or software problem?

See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button

Why does CC update .png files only some of the time?

I am creating some lower thirds from a template in PS, saving them as .png files and bringing them into the project. When I get updates from our clients, I will make those changes in the .psd, and save over the original .png file. Sometimes CC will update that file in the project without having to re-import and everything is fine. It isnt a huge hassle to just replace the file but Id like to know why it only works some of the time.

Hi Landshrkk,
The script only outputs the names of the services that have deployments, because the get-azuredeployment cmdlet encounter error and didn't pass the result to select cmdlet, please try the script below:
$output=@()
Select-AzureSubscription MyAzureSubscription
$ServiceNames = Get-azureservice
foreach ($service in $ServiceNames){
$ServiceName = $service | select -ExpandProperty ServiceName
$ServiceDateModified = $service | select -ExpandProperty DateModified
$s=$service |get-azuredeployment -ErrorAction SilentlyContinue -ErrorVariable NoDeployment
$output += New-Object PSObject -Property @{
ServiceName = $ServiceName
DeploymentName = $s.DeploymentName
Status = $s.Status
CreatedTime = $s.CreatedTime
LastModifiedTime = $s.LastModifiedTime
ServiceDateModified = $ServiecDateModified
NoDeployment = $NoDeployment}
$output|Sort-Object -Propert DeploymentName |export-csv "outputfile.csv" -notypeinformation
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

Define "the Aperture files".
Read this concise guide.
The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals". Your Originals are never altered. What went in is what comes out.
Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file. This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture. There is no file saved to disk that is the full-size Image. Thumbnails are saved, and Previews are saved. These are JPG files, almost always smaller than the Original. They are not substitutes for the Image for the use you have.
When you need a file of an Image to use in another program, you export the Image from Aperture. "Export" means "Make me a file of this Image according to these file specs I'm providing". The way to get files of your adjusted Images is simple: create them by exporting. Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
Search the Web for information about transitioning from Aperture to Lightroom. Note that I say "transitioning". You cannot move a database from one format to another without significant changes, and likely some loss of information. Adobe provides a tool and some instructions. I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
As always, never use any computer file without having a back-up.
We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database. Just as a metaphor for any user contemplating transitioning to another digital asset manager: that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
HTH,
Kirby.

I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

DW CS3 cross-platform check in/out file locking

Here is my setup:
* Apple X-Serve file server (as a mapped drive on several
Windows XPsp2
machines and a shared drive on one Mac 10.4)
* Up-to-date Dreamweaver CS3 on every machine (3 windows, 1
mac)
* Enable file check in and check out (site preference for all
installations)
* Contribute compatibility (site preference for all
installations)
The problem is that when a file is checked in on the mac, the
file becomes
locked such that the windows machines can't check out the
file. All of the
windows machines check out and check in files with no problem
if the mac hasn't
touched them. Once the mac has checked in a file, I have to
"unlock" the file
via the right-click context menu on the file. (This unlock is
called "Turn off
Read Only" on the windows version.)
Windows FTP Log on check out after mac check in:
/.../public_html/help/faq.php - locked
/.../public_html/help/faq.php - error occurred - An FTP error
occurred -
cannot get faq.php.
/.../public_html/help/faq.php - unlocked
Apparently the Mac DW CS3 version of "Check in" and the
Windows DW CS3 version
of "Check in" are different and incompatible. Has anyone else
had this problem
or know of a solution? Removing the Mac is not an option.
This may or may not be related, but whenever a file is opened
on the operating
system other than last edited (mac opens windows edited file
or windows opens
mac edited file), the "Overwrite local copy" dialog shows up
when checking out
a file. When a compare is made of the server/local files,
there are no changes.
Both mac and windows have the same line ending settings in
the preferences.
http://www.hostingforum.ca/700363-cs3-cross-platform-check-out-file-locking.html
I'm having exactly the same issue. Has anyone experienced
this before, and if so have a solution?
Thanks in advance!

In your Site definition, you need to specify the Remote Info
of your
server, and then "Enable file checkin and checkout".
HTH,
Randy
djdeel wrote:
> I am unable to check out a file using the context menu
when right clicking on the file.

Check-in/out files only works some of the time

Similar Messages

Maybe you are looking for