Check shelf life date by customer when goods issue

Hi
Since each customers will required to have different remaining shelf life of the product when deliver to their store such as 7-11 may required 100 days, Tesco Lotus 150 days so the manufacturing and trading companies of foods & beverage needs to control shelf life of their product by customer.
In general , shelf life is set in material master - storage view so it's not attach to each customer - anybody know how to apply it?
Pls help
Regards,
Chanchana

Hi,
You can control this via batch determination. Using condition technique, you can set the desired length of remaining shelf life for each of your customer (I mean you can create a condition record for each of them with the suitable parameters).
Please check these links:
http://www.renet-web.net/2008/09/05/sap-batch-determination-made-easy/
http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/283aac4f7811d18a150000e816ae6e/frameset.htm
(As per my best knowledge you won't be able to consider remaining shelf life during planning.)
Regards,
Csaba
Edited by: Csaba Szommer on Apr 5, 2009 8:56 AM

Similar Messages

Frequency of Shelf life date

Hi,
Can we find the frequency of Shelf life date in the database table which has stored the date change records. This shelf life date entered in the LS22 T.Code. But there is no log existing in the table. Please
consider this mail and reply ASAP.
Regards,
Sathya.M

Hi,
I tried and activate log in table level, I could see the changes using SCU3 T.Code in table level. It
shows old value and new value of all the field in that table,Which means whatever changes made in that
table it displayed the history. My question is, can We activate the log for particular field.
Thanks.
Sathya.M

COST GL account when goods issue - enhancement or user exist

Hello SAP exports,
There is a requirement from F&A department for different COGS GL account based on Customer Account Assignment Group value when goods issues (GI) (goods movement). Customer Account Assignment Group field name is KNVV-KTGRD.   The solution is NOT possible for standard SAP SD (pricing procedure) / MM (T-Code:OBYC with GBB).    Therefore, I am searching solution for enhancement.
the requirement is like following:
KNVV-KTGRD                                   COGS GL account at goods issue
01                    Domestic                   818100
02                    Export                       818200
03                    Testing - sample         818300
04                    Testing - VOM            818400
05                    Franchise                   818500
Can you please let me know what and how this can be resolve by enhancement or user exist?
Thank you.
Kind Regards,
Sylvia Chen

Hello,
The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
the logic is following:
KNVV-KTGRD              COGS GL account at goods issue
01 Domestic                 818100
02 Export                     818200
03 Testing - sample      818300
04 Testing - VOM         818400
05 Franchise                818500
I am not good at user exist.
Can you please provide solution with step-by-step guide?
Thank you.
Regards,
Sylvia Chen

Batch expiration date check when goods issue

Dear expert,
In batch expiration date check, we have a requirement that when do goods issue with delivery note we should have a expiration date check for expired batch(the system needs to give a warning message when we want to pick a expired batch(in WM) or to issue a expired batch). But I checked OMJ5 and found that there is no check for movement type 601, 641, 643 or 647. Do we have a standard function for this requirement? Thanks.
Leo

Hi,
In SD batch determination normally happens during Delivery creation for a Sales Order, Check for batch determination is maintained for a combination of sales org, order type - system determines Search Procedure at this level (here a check box also controls the batch check against selelction rules in case somebody puts a batch manually)
later on through selection class and sort rules batch expiry is check during determination
so all checks are applied before an actual goods issue is made so std SAP doesn't provide this check indicator at mvt type level
Hope this helps
Reg
Dheeraj

Control "Shelf Life" date: Transaction LT03

Hi,
we want to check the validity date of the field "Shelf Life" (field SLEDBBD in the ALV) in the transaction LT03 before creating the Tranfert Order. For the moment the standard does not provide any control on this field:
Basically, the standard flow is in that way:
LT03: Create a Tranfert Order for Delivery (no control)
LT12: ConfirmationCheck the validity date of the Shelf Life
Reject
Accept
Our need consists to generate a blocking error message when the validating batch number is expired in LT03, like that:
Have you got some Technical/Custo idea?
Best regards.
Rachid.

Hi,
You can control this via batch determination. Using condition technique, you can set the desired length of remaining shelf life for each of your customer (I mean you can create a condition record for each of them with the suitable parameters).
Please check these links:
http://www.renet-web.net/2008/09/05/sap-batch-determination-made-easy/
http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/283aac4f7811d18a150000e816ae6e/frameset.htm
(As per my best knowledge you won't be able to consider remaining shelf life during planning.)
Regards,
Csaba
Edited by: Csaba Szommer on Apr 5, 2009 8:56 AM

Check shelf life while GI

dear all,
I have configured batch determination for raw material to produce a SFG. I have mentained shelf life period for that raw material.
I have also mentained sort rule characteristic LOBM_VFDAT.
But when we do backflush for this raw material system also selects batches which are expired ie whose shelf life is comleted.
I want to restrict those batches which are expired for GI. how can I achieve this? Is any configuration i am missing?
S J

Dear SJ,
Deadline montoring has two pieces to its program. The top section is the section for creating inspection lots. It uses the next inspection date.
The second section handles actual expired material. It uses the batch expiration date. If you don't want to create inspection lots, leave the window value null in the first section and don't activate any 09 inspection types.
The deadline monitoring program will first, (if a value is in the window field of the second section. sj - make sure you enterred at least a one here.. that might be why its not working for you), look at batches in unrestricted inventory and will move them to blocked stock if they will expire within the window value of days. i.e. if you but 10 in as the window value, it will move all batches to blocked stock that will expire in the next ten days. You do not need any QM active to utilize this part of the program.
After moving batches to blocked stock, it then looks at unrestricted inventory for batches that will reach their next inspection date within in the window specified. If the 09 inspection type is active, it will create an inspection lot and handle stock according to the selected radio button.
Keep in mind that if a batch reaches the inspection date and expiration date at the same time, the batch will be in blocked stock with no inspection lot since the expiration portion of the program runs first.
I usually set up the program to run twice, first to just create inspection lots, and then second, to move expired material.
Regards
Varma

Item Cost FIFO was wrong when Goods Issue. How to slove it?

Dear Experts,
I met item cost of FIFO item was wrong when I did Goods Issue. The scenario is I did goods receipt from PO that item cost was 8.02 per unit. Then I saw in the inventory audit report that item cost was 8.02 per unit. That's right.
But after that I did goods issue the item cost was 7.485 per unit. And I check to Journal Entry and Inventory audit report were posted the wrong item cost, 7.485 per unit. What source does the system bring to calculation item cost for goods issue?
I access to SQL for check OINM and OITM table. Both of OINM and OITM's item cost were correct in the goods receipt transaction, but they booked wrong cost, 7.485 per unit, in goods issue transaction. I don't understand the logical that SAP B1 use to calculation item cost that use for goods issue. In the past I think the table that related to item cost calculation was only OITM, OITW, OINM, but now I think I misunderstand it due to this case.
Regards,
Pornrat Trisauvapak

Dear Gardon,
I use the FIFO for calculation and in this case has only one lot remain, that cost 8.02. Now I observe OINM table again all field are correct except OpenValue field. I'm not sure this field is related to item cost of goods issue, or not?
Regards,
Pornrat Trisauvapak

G/L account issue when goods issue against reservation

Genius,
I manually created a reservation with movement type 201 and a G/L account which is difference from one defined in OBYC GBB-VBR.
When I post goods issue by MB1A, I got the account from OBYC; But when I post it by MB26, I got another account maintained on reservation.
Did someone encounter the same issue? Thanks for your reply.
Binary

Hi,
Check the document and in the layout in the accounting document you can able to see the Transacation type i.e GBB and also which it appeas. You can also see the GL Accounts.
Revert back for clarification.
Thanks and regars.
S.Subbiah.

Error message popped up when goods issue via mb1a

Hi guru:
I encountered the error message when I am trying to goods issue via mb1a as below:
Document 1000041 / 0000000074 does not contain any
selectable items
How to solve?

check are you maintained the backflush indicator in Component overview, Remove the backflush indicator and do the Posting In MB1a, or while confirming DO the goods movement If you want Back flush in Co11n
and also check final issue is ticked or not in component overview

How to split Inventory and customs during Goods Issue

Hi Friends,
We create an Intercompany PO and do a GR against it. It creates an automatic GI. The Material document posted during GI is Dr. COGS account and Cr. Inventory account. The Inventory account consists of stock value + customs duty paid during GR. Now we want to split this inventory and customs separately while posting the GI.
For Example: Stock value = $100, Customs duty $10. Then total inventory value is $110.
Current postings
Dr. COGS      $110
Cr. Invenotry $110
To be postings
Dr. COGS          $100
Dr. Other Costs $ 10
Cr. Inventory      $100
Cr. Customs       $ 10
Please share any inputs to achieve the required postings.
Regards
Surya

Hi
In our company we have the following cycle if it can gives you any idea:
inventory purchase with custom/ freight cost
Dr. Inventory                         1150
     Cr. GR-IR                         1000
     Cr. Custom for Inventory    100
     Cr. Freight for Inventory       50
While Goods issue to production :
Dr. COGS                1150
     Cr. Inventory        1150
Regards
Mahmoud El Nady

Serial Number isn't copied when Goods Issue reference to order

Dear All,
I had maintained serial number profile in material master but I still have a problem when i want to goods issue (TCode MB1A) the material with serial number from refurbishment order (order type PM04).
Why the serial number isn't copied automatically from the serial number that i had entered before in the refurbishment order. it still asked to enter serial number. Logically, it should be listed from the serial number in refurbihsment order.
Is there any configuration that i must do?
Best Regards,
Albert J.

nobody replied

During goods returns same accounting entry as when good issue

Hi,
In our project we have a condition that charge on a provision account during goods receipt of a purchase document. Hers the accounting entries generated is ok. However we also create purchase order with return item. During goods issue (mvt 161) the accounting entries created is same as the goods receipt instead of being the inverse.
I do not understand how this is determine and will be grateful if you could help me. Thanks.

hi,
Check the details and TE key which is hit while 161..
If its correct then go to OBYC and check the G/L account which is getting hit in the inverse for your transaction...whether it is properly set or not...
it may be possible that instead of deibt it would be getting credit n visa versa....
Regards
Priyanka.P

SPED output type doesn't appear when goods issue done

I have made goods transfer from one storage to another via two-steps procedure. Both storages have WM.
So I create UB order (Me21n) -> outbound delivery -> transfer order. Then I approve the transfer order and the goods issue is done automatically. In this moment SPED output type has to appear in outbound delivery and to create inbound delivery.
SPED settings are:
dispatch time - 4 (Send immediately when saving the application)
transmission medium - 8 (special function)
req. routine - 408.
The problem is that after goods issue done via transfer order approving I haven't SPED in outbound delivery. I need to open the delivery to change (SPED appears) and save it. Can it be solved by any standard method or only by ABAP?

Hello Mihailo
Thank you for your answer.
I think so too but I hope it can be another way. It's really strange situation because I see that the delivery status is updated after the goods issue. So the devilery is re-saved. But the output document doesn't appear.
How you solved it in your expirience via change the delivery in background by ABAP or via any new req. routine?

Alert when goods Issue is created

Hi All
I have requirement, I have 2 users 'A' and 'B'
When the user 'A' creates a Good Issue then User 'B' should get an alert next day morning.
Can any one please let me know what is the query I can use to trigger an Alert.
Regards
Murali

SELECT 'True' FROM OIGE T0 INNER JOIN OUSR T1 ON T0.UserSign = T1.userSign WHERE T1.U_NAME = 'A'
Please note that alerts are only triggered when the SAP Business One client application is running + with some delay (theoretical minimum frequency is 1 minute).
Depending on CPU-load etc 1 minute may not be equal to 60 seconds...
Regards,
Frank

Allow Goods Receipt only when Goods Issue already done against process order

Hi,
Can we put a validation that , in case of process order, without goods issue system will not allow for goods receipt against that process order.
Regards,
Archana

Check this link
http://scn.sap.com/thread/493508
User exit for GR without GI
Regards,
Himanshu

Check shelf life date by customer when goods issue

Similar Messages

Maybe you are looking for