Check the Stock of a particular material is available in SAP R/3 from Java

Hi all,
We have both SAPR/3 and Java Based Systems and going to integrate with XI.
For Java user is it possible to check the Stock of a particular material is available in SAP R/3 system or not.
For this requirement can we create any scenario and get the stock available info from SAPR3?
If so then which type of adapters we have to use in this case.
The Java user don't want to store any data here and there but just view the stock is available or not just from his end only.
bye
regards
konala

You can use synchronous Java Proxy-XI-RFC.
Code the RFC to get the stock of R/3 material and route the response back to proxy.

Similar Messages

  • Check the stock for a particular material belonging to a material group.

    Hi,
    Is it possible to check the stock for a particular material belonging to a material group.
    Your help will be appreciated.
    Regards,
    kavita.

    Hi Kavita,
    go to transaction MB52 , in the selection screen enter the material and the material group  that you want the results for, and execute. You will get desired results.
    Regards
    Mangesh
    Reward points if it helps
    Message was edited by:
            Mangesh More

  • Where can i find the Datewise stock for a particular material

    Hello friends,
    In which table i can find the stock of a particular material on particular date?.MARD, MCHB these all tables gives the current stock of material.But i want to find the stock of material on particular date.In Report MB5B and MC.9 we can find the stock on particular date but is there any table from where these reports fetch the data?
    Thanking you guys in advance.

    Dear Jitendra,
    Check once again in this thread whether are you able to find out some help.
    But I'm sure MB5B is not getting the info from a single table,it's getting the information from info
    structures and few tables.
    table to see stock on particular date
    Regards
    Mangalraj.S

  • How to check the stock transfer material report

    hi
    i want to check stock transfer report for material from one plant to other palnt

    Hi
    To display the value of the cross-company-code stock in transit with a report, choose Environment > Stock > Stock in transit Cc.
    Displaying Transit Stock in the Stock Overview
    You can display the stock in transit in the stock overview of a material.
    From the Inventory Management menu, choose Environment > Stock > Stock overview.
    Enter your selection criteria (for example, the material and receiving plant).
    Carry out the evaluation. A stock overview of your selected plants is displayed.
    Select a plant. The stocks in the plant are displayed in a pop-up window.
    Scroll down until the stock in transit is displayed.
    Displaying Transit Stock in the Plant Stock Availability List
    The transit stock for the receiving plant is also displayed in the plant stock availability list for a material. To do this, proceed as follows:
    From the Inventory Management menu, choose Environment > Stock> Plant stock availability.
    The initial screen for this function appears.
    Enter the material and the receiving plant.
    Enter the scope of list (for example, DD).
    Carry out the evaluation. A list of the plant stock availability for the material is displayed.

  • Logic to build report to get the stock on a particular date

    Dear Guru's,
    We are trying to build a report for getting the stock on a particular date. It is not possible to copy MB5B that option is ruled out. We have also tried to get the data from MBEWH but that is also  not helping as the table is not updated for all the periods.
    Please advice
    Thanks,
    Sam

    Dear Sameer,
    You can copy MB5B report and can modify as per your reuirement.
    If you want get stock a paticular date.It is hard to get, why because you have to fetch all the Material documents
    and you have to use MBEW table to get the current date stock and you have to do add/subtract from calculated stock.
    Due to this there will performance issues also.
    So try to copy MB5B and change as per your requirement.
    regards
    Subhash

  • To check the stock of the header and components in same screen?

    Hi ,
    Is there is any option available in SAP to check the header and its components exising stock in same screen like in multilevel bom we can see BOM and components same way we need one more column which shows the avialble stock.
    Thanks
    KK

    Dear Madhu,
    My question is we need to check the stock for one material and it's components to manufacture it in one screen for this is there any option available in standard SAP,where as you have suggested MB52 which gives me the plant stock for all materials.
    Thanks
    KK
    Edited by: kiran kumar on Mar 28, 2010 8:31 AM

  • Transistion in SAP to know The Stock For List Of Material

    Dear Sir,
    Is there any transistion in SAP.
    To know the stock for list of material.
    For Ex=
    I want to know the stock for below material in one shot
    1) A
    2) B
    3) C
    4) D
    Pls solve my problem soon
    Thanks & Regards
    Ajay Pareek

    Hi Ajay,
    Following are the some of Useful T.Codes for the stock Report.
    LT51 Maintain Preallocated Stock
    LVASE Exit stock from Work Center
    LX02 Stock list
    LX23 Stock comparison IM - WM
    LX27 Stock levels by shelf life exp.date
    MB52 List of Warehouse Stocks on Hand
    MB53 Display Plant Stock Availability
    MB54 Consignment Stocks
    MB5B Stocks for Posting Date
    MB5K Stock Consistency Check
    MB5L List of Stock Values: Balances
    MB5OA Display Valuated GR Blocked Stock
    MB5T Stock in transit CC
    MB5TD Stock in Transit on Key Date
    MB5W List of Stock Values
    MBBS Display valuated special stock
    MBLB Stocks at Subcontractor
    MBSF Release Blocked Stock via Mat. Doc.
    MBW1 Special stocks via WWW
    MC.1 INVCO: Plant Anal. Selection: Stock
    MC.5 INVCO: SLoc Anal. Selection, Stock
    MC.9 INVCO: Material Anal.Selection,Stock
    MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
    MC.H INVCO: Business Area Anal.Sel. Stock
    MC.L INVCO: Mat.Group Analysis Sel. Stock
    MC.P INVCO: Division Analysis Sel. Stock
    MC.T INVCO: Mat.Type Anal.Selection Stock
    MC48 INVCO: Anal. of Current Stock Values
    MC49 INVCO: Mean Stock Values
    MC50 INVCO: Analysis of Dead Stock
    MC8M Read Opening Stocks
    MCB) INVCO: Long-Term Stock Selection
    MCC4 Set Up INVCO Info Structs.from Stock
    MCH: RIS: STRPS/Mvmts + Stock - Selection
    MCKJ Selection version tree: Stock
    MCKR User-spec. sel. vers. tree: Stock
    MCNB BW: Initialize Stock Balances
    MCSK Call Standard Analyses of Stocks
    MD04 Display Stock/Requirements Situation
    ME27 Create Stock Transport Order
    ME2O SC Stock Monitoring (Vendor)
    MF65 Stock Transfer for Reservation
    MI35 Batch Input: Post Zero Stock Balance
    MILL_ Cutting Stock Transfer
    MIQ1 Batch Input: PhInvDoc. Project Stock
    MM73 Special Stocks: Preparation
    MM74 Archive Special Stocks
    MM75 Display Archive of Special Stocks
    MMBE Stock Overview
    MMBE_ Stock Overview
    MMCL Stock Overview by Characteristic
    Or you can refer the thread [stock overview;, search there are several threads already available regarding this.
    Regards,
    Shyamal

  • MB1B i need to check the stock overview & venodr stock

    HI Experts,
            i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the stock otherwise any enhancement can fulfil this requirement.

    Hi,
    Enter movement type 541, PO referenc and on next screen, click on Environment tab, enter only plant, remove storage location , select Stock Overview -> Stock Material , system will show you stock in Plant for all Storage Location as well as Stock lying at Vendors end, else if tyou want to know stock lying at vendor's end , you can run report MBLB (Stock at subcontractor)
    Regards,
    Vikas

  • If physicaly checked the stock found zero. how to enter stock zero in systm

    if physicaly checked the stock found zero. how to enter stock zero in system
    thanx

    Hi
    You can follow the following physical Inventory transaction for updating ZERO stock in the system.
    Please go with following transaction
    MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
    (After getting Physical inventory document number you go with MIO4)
    MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
    (After completed above transaction you please go with MI07)
    MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
    Physical Inventory:
    Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
    Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
    Physical Inventory Processes:
    Several inventory processes available for physical inventory which includes as follow:
    1. Periodic Physical Inventory
    o All stocks of the company are physically counted on the balance sheet key date
    o Every material must be counted
    o Entire warehouse must be blocked for material movements during count.
    2. Continuous Physical Inventory
    o Stocks are counted continuously during the entire fiscal year.
    o It is important to ensure that every material is physically counted at least once during the year.
    3. Cycle Counting
    o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
    o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
    o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
    4. Inventory Sampling
    o Randomly selected stocks of the company are physically counted on the balance sheet key date.
    o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
    Physical Inventory Process Cycle Flow
    1. Creation of physical inventory document
    - Physical inventory document(s) is created individually or using the batch program, click for more information
    - The transaction codes for creation physical inventory are as follow
    Individual Inventory documentation creation
    MI01 - Individual physical inventory creation
    MIS1 - Inventory Sampling document creation
    MICN - Cycle count inventory document creation
    Collective Inventory document creation
    MI31 - Own stock without special stock
    MIK1 - Vendor consignment
    MIQ1 - Project stock
    MIM1 - Returnable Transpiration material
    MIW1 - Customer Consignment stock
    MIV1 - Returnable material with customer
    MIO1 - Material provided to Vendor (Subcontracting material)
    2. Print physical inventory document
    - Physical Inventory document can be printed based on the physical inventory document status and or item status
    - Transaction code MI21 is used to print the inventory document where print default value can be populated
    3. Count the physical stock
    - Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
    4. Enter count in system
    - On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
    - If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
    5. Analyze difference
    - Once count is posted in the system, difference analysis can be carried out using transaction MI20
    - The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
    - The output gives information about the book quantity, Counted quantity, difference in quantity and value.
    - From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
    6. Initiate recount and follow the steps 3,4,5
    - If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
    - New inventory document will be created for selected items or for entire document
    - The original document items will be deactivated once recount is initiated so original document will not be available for further process.
    - On initiating recount, you need to process same as for new count document.
    7. Post the difference
    - Several options are available for posting difference
    - Post difference after count is posted using transaction code MI07
    - Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
    - Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
    some more points for posting difference
    - Posting period must be open to post inventory difference.
    - The fiscal year is set by specifying a planned count date when creating a physical inventory document.
    - Tolerence to crear difference per user group can be set in customization.
    - The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
    - The movement type in material document will be 701 or 702 based on gain or loss of material.
    Serial Numbers in Physical Inventory
    If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
    - Serial number profile must be maintained in the material master.
    - the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
    - The stock check indicator in the serial number profile should be configured.
    - Maintain basic settings for the serial numbers in customization for Serial Number Profile.
    - Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
    Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
    Thanks & Rgds,
    Rajesh

  • Report to check the stock transfer through 303 mvt type

    Hi,
    I understand that the stock transfer can be done through two ways
    1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
    2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
    When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

    hello
    for this you can use MB51 only. same report you can give the movement types as 313 & 315.
    Laxman

  • Get the Stock for a given Material no

    Hi,
         I'm an ABAP consultant, new to MM.
         I have a requirement - For a given Production Order I have to find the Material and respective BOM Explosion. Once that is done I have to get the Stock for those Materials [Child Materials].
    I have used AUFK and AFPO to get the material from the Production Order and Used MAST table to get the other details and passed it to FM - 'CS_BOM_EXPL_MAT_V2' - This gives me the Child materials.
    Now I want to know how can I find the Stock for a given Material. I want to get the Overall Unrestricted stock. Which Table do I have to use. Is there any standard Function Module [FM] or BAPI to get it.
    Please help.
    Thanks & Regards,
    Ashish

    I have gone through  the MARD table. I want to confirm - for a Material no there are more than 1 plant and for each plant there are more than storage location. So I have to add the Unrestricted Stock of all those to get the Full Unrestricted Stock.
    Please refer Transaction MMBE - I have to use that output.

  • T.Code for checking the total value of a material

    Hi Experts,
      Can anybody tel me the T.code for checking the total value of a material which is procured in a specified period?
    Thanks in advance
    Channa

    Refer Tcode ME80FN click on Change Veiw & select Purchase Order History with this you can get PO-GRN-INVOICE Qty & Value details
    Last button on Application tool Bar it is in line of filter, total etc icons
    Also check below reports :
    MC$G - PURCHIS: Material PurchVal Selection
    MC$0 - PURCHIS: PurchGrp PurchVal Selection
    MC$< - PURCHIS: MatGrp PurchVal Selection
    MC$4 - PURCHIS: Vendor PurchVal Selection

  • I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

    Hi,
    I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
    Nitin

    For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

  • Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

    Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

    Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
    But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
    Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

  • Sales Order ATP should exclude the stock of a particular st. loc

    Hi,
    At Sale order creation, ATP check should exclude a particular Sto Location,
    Suppose we have Sto Loc 001, 002, 003, 004 & 005, we want to reserve some stock for the next year, so we identify one storage location say 005 and move some stocks to this storage location. Now when the sales people are creating Sales order, the ATP check should exculde stocks from this Storage Location (the stocks in this sto loc should not be considered in ATP).
    But for all other purpose like MRP this should be visible. We want the stock to be in unrestricted area in this Sto Loc.
    Request you all to propose a feasible solution either through User exit or some configuration.
    Thanks in advace,
    Navin

    Hi All,
    Thanks a lot for all the replies, I found in the storage location table T001L, a field ``DISKZ`` settings called ``Storage location MRP indicator`` the details are as follows Storage location MRP indicator
    that you use to exclude storage locations from material requirements planning at plant level.
    If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
    Use
    You can exclude storage locations from MRP at plant level in one of two ways:
    By excluding storage location stock from MRP
    If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
    By planning storage location stock separately
    If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.
    Has any one tried this and does this meets the requirement.
    Thanks in advance,
    Navin Shinde

Maybe you are looking for