Check up on hard drive/file integrity (failing hard drives)
Hi
The only tool I have found for monitoring hard drive health is SMARTreporter[1]. Unfortunately, S.M.A.R.T. status isn’t supported by USB 2 and Apple haven’t implemented support for it for FireWire drives. So this app is useless.
How can I monitor hard drive integrity? I want a daemon that monitors my external drives and can notify me when sectors become unreadable/my files start getting corrupted.
Please advise.
1. http://www.corecode.at/smartreporter/
There is no such animal. The only information available from a hard drive is through SMART. You can use Disk Utility to repair a drive, verify a drive, and repair permissions.
Even SMART can only report information that tells if a drive is failing after the fact. You cannot know if a drive is going to fail only that it has failed. At best SMART may report that a drive is fine, yet the drive will fail because SMART gives a false positive. It's far from ideal. If SMART reports that a drive is failing there's a pretty good chance it is failing. False negatives are less likely than false positives.
If you want to avoid losing data from a drive failure then backup frequently and make multiple backups. This is your only reliable protection agains file corruption or drive failure.
Similar Messages
-
SSM-40 ver7.1.(8)E4- and Tripwire File Integrity check
We recently upgraded to this version of the firmware from ver 7.0.6
When we did - Tripwire File Integrity fails to discover the command prompt when pulling the configuration. It does not execute the --more-- command.
Has anyone else experienced something similar on this firmware? We can execute the command from an ssh command.
Thanks!BTW- I should add - the device logs on - it does not get past the Cisco license which displays. It hangs where in theory the first "more" would exectue - to pass through the text. The problem is there is not a way for me to execute the more command (ie term length 0) or anything prior to the logon - because once the Tripwire interface logs in - the CISCO license displays and pauses halfway through - and requires the more command before it gets to the command prompt. Because this command is never executed - it hangs and then times out. I also should add that the new firmware appears to be using a later version of ssh - 199openssh_5.9 - as opposed to 199openshh_3.71ps as the former version of firmware was.
-
ORA-01122: database file 58 failed verification check
Hi All,
I have lost one of my datafile while moving them from 1 drive to another. I am getting the following error while trying to start the database:
ORA-01122: database file 58 failed verification check
ORA-01110: data file 58: 'G:\ORACLE\R3E\SAPDATA7\R3E700_25\R3E700.DATA25'
ORA-01251: Unknown File Header Version read for file number 58
Please suggest what can be done to correct the error. Also I don't have a backup.
Suman- open http://service.sap.com/notes
- enter "ORA-01251"
- you will find Note 696141 - Composite SAP Note: ORA-01122
and that section:
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Markus -
ORA-01122: database file 8 failed verification check
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 29 17:57:51 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2816
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
M DpShMCreate: sizeof(file_adm) 208064 (72)
M DpShMCreate: sizeof(vmc_adm) 18720 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
M DpShMCreate: allocated sys_adm at 08750040
M DpShMCreate: allocated wp_adm at 08751E40
M DpShMCreate: allocated tm_adm_list at 087565C0
M DpShMCreate: allocated tm_adm at 087565F0
M DpShMCreate: allocated wp_ca_adm at 08B25890
M DpShMCreate: allocated appc_ca_adm at 08B2B650
M DpShMCreate: allocated comm_adm at 08B2D590
M DpShMCreate: allocated file_adm at 08BAE450
M DpShMCreate: allocated vmc_adm_list at 08BE1110
M DpShMCreate: allocated gw_adm at 08BE1150
M DpShMCreate: allocated vmc_adm at 08BE1180
M DpShMCreate: allocated ca_info at 08BE5AA0
M DpShMCreate: allocated wall_adm at 08BE5AA8
M DpSesCreateTable: attached session table at 06440040 (len=138424)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Tue Apr 29 17:57:52 2014
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcInit2: o.k.
M
M Tue Apr 29 17:57:53 2014
M ThInit: running on host sapecc6
M
M Tue Apr 29 17:57:54 2014
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C
C Tue Apr 29 17:57:55 2014
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20140429 175754 SAPECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
M ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
J
J Tue Apr 29 17:57:57 2014
J extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
J extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
J extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
J extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
J extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
J extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
J extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
J extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
J extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
J extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
J extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
J extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
J extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
J extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
J extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
J extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
J extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
J extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
J extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
J extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
J extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
J extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
J extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
J extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
J extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
J extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
J extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
J extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
J extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
J extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
J extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
J extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
J extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
J extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
J extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
J extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
J extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
J extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
J extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
J extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
J extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
J extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
J extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
J extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
J extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
J extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
J extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
J extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
J extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
J extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
J extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
J extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
J extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
J extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
J extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
J extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
J extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
J extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
J extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
J extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
J extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
J extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
J extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
J extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
J extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
J extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
J extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
J extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
J extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
J extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
J extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
J extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
J extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
J extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
J extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
J extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
J extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
J extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
J extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
J setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
J getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
J getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
J getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
J getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
J getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
J selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
J rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
J sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
J selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
J proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
J extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
J getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
J getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
J getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
J getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
J isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
J getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
J createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
J statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
J openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
J closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
J intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
J extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
J extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
J extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
J extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
J extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
J extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
J extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
J extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
J extCheckForCleanup is set to <null>
J extJvmxInit2 is set to <null>
J extJvmxCleanup is set to <null>
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
I
I Tue Apr 29 17:58:05 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
M SHM_ROLL_AREA (addr: 59250040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0C170040, size: 615040)
M SHM_PAGING_ADM (addr: 0C210040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C
C Tue Apr 29 17:58:06 2014
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BYL=> DBQ action required because of database error [dbsh#2 @ 1100] [dbsh 1100 ]
B SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
B ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2047]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1494]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Tue Apr 29 17:58:06 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c 327]
sql>select status from v$datafile;
status
One of my datafile status is 'RECOVER'
SQL>recover datafile 8;
ora_00283 recover session cancelled due to errors
ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Please give me the suggestion..
Best regards
naniHi K Nani,
From your error message
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Looks like Data file is corrupted.
You may refer SAP note 696141 - Composite SAP Note: ORA-01122
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Only solution here is restore the database from backup.
Alternate solution If it is a non-production system.
If the file is corrupted, then take the datafile offline and open the database.
Hope this helps
Regards,
Deepak Kori -
ORA-01122: database file 30 failed verification check
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Feb 13 20:33:13 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
when starting the DB for 10gAS get following error, db is started but cannot sign in
SQL> SQL> Connected.
SQL> ALTER DATABASE open
ERROR at line 1:
ORA-01122: database file 30 failed verification check
ORA-01110: data file 30: 'D:\ORACLE\ORADATA\PRT\APPS003_A.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining optionsYou have a mismatch in the control file and data file scn numbers. What was done before the database was getting started? I once saw this error when some one moved one file from another munt point to another and there was no rename give to the control file and the control file got no idea which is this new file and where it had come from?
Try finding the control file which is of the same backup as of this datafile.
Aman.... -
Database file 1 failed verification check on standby
Hi ,
i m getting a trouble on my physical standby database(Oracle 10g Enterprise edition).
I have taken standby controlfile backup from production . And Restored it on Standby database then i m getting following errors :
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'E:\ORACLE\PRODUCT\ORADATA\TESTDR\SYSTEM01.DBF'
ORA-01206: file is not part of this database - wrong database id
My production aND standby database ID are same :
Edited by: user12045405 on Nov 6, 2012 11:16 AMCheck this
http://oracleinstance.blogspot.in/2010/08/ora-01122-ora-01110-ora-01206-after.html -
Database file 4 failed verification check
Hello,
When I start database, message displayed as
follows:
ORA-01122: database file 4 failed verification check
ORA-01110: data file 4: '/usr/nas/databases/D1/DADM/oracle/datafiles/DADM_rollback1.dbf'
ORA-01251: Unknown File Header Version read for file number 4
Database is not started up.
I need help how to fix it.
Thanks in advance
nullDear,
This error says that urs current datafile is corrupted their are two to three solution on which we can work out.......
1.if urs database is in Archive log then do the following
a) shutdown the database
b) start mount
c) make sure that u have all the archive log file in the directory where they should be
d) recover database, then it will ask all archive log file just press enter or write Auto their,
2) If urs database is not in Archive log then u have restore from urs lsat backuup.
3) If this datafile if not very much in use u can make it offline and start urs database.
null -
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
File Adapter: Fixed length file read fails when all data not present
Hi
We have a BPEL process that reads fixed length data files. It works fine when all the data elements are available in the file but fails with 'rejected:10002' when even a single data is missing.
How to handle this situation in BPEL file adapter?
Are we doing something wrong or is this a normal functionality.
If yes, then is there any work around for this as this is a very usual business condition which may occur, where all data elements are not mandetory.
fixedLength
==========
2,3,3,2
Data - Successful
============
1234567890
2345678901
3456789012
Data - Failed
===========
1234567890
2345678901
345678901
Thanks in advance
BuddhadevHi Naveen,
Do check the following things,
>>Note : I have been asked to give the Transport Protocol as "NFS" (Whether this is the problem???) I have summarized the complete details below. Please help me
1.If your file resides on your local network/local computer give NFS(Network file system). if your file resides on a FTP location give FTP and also give the FTP log on parameters.
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration
2.If this structure does not match with the input file structure the file adapter wont pick up the file. So check for the help document provided by SAP in the following path.
help.sap.com --> Documentation --> SAPNetWeaver --> SAPNetWeaver '04 --> English --> process integration --> SAP Exchange Infrastructure --> connectivity --> Adapters --> File Adapter
Your file contains three records
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
You have mentioned the fieldSeperator as space but there is no File_MT.endSeparator '/n' which differentiates between each and every row (record).
Parameters for Record set Structures mentioned in the sender adapter configuration does not match with the actual file structure .
Try giving exact structures in the configuration of sender file adapter.
regards,
Aravindh. -
CSV to Oracle - (Integration) fails on the target ORACLE connection
Hi,
I am trying to load data from a csv file into Oracle db via ODI.
Here are the steps i followed:
1- Created the FILE physical schema
1- Created the Oracle data server and physical schema in Physical Architecture
2- Created and linked to logical schemas
3- Created the correspondent data models and stores and a
ble to view the data contents of the CSV and of the target table in ODI.
4- Created interface, added csv as source and oracle table as target
5- Used "LKM File to SQL" and "IKM SQL Control Append" (FLOW_CONTROL is false)
When i execute the interface, the session starts then i receive the following wrror in Operator:
ODI-1228: Task ARIBA_G1 (Integration) fails on the target ORACLE connection DEV_DW.
Caused By: java.sql.SQLException: Non supported SQL92 token at position: 116
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the Code section:
BeanShell script error: Sourced file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : Typed variable declaration : Error in method invocation: Method getDataSetMin() not found in class'com.sunopsis.dwg.snpreference.SnpReferenceInterne' : at Line: 25 : in file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : odiRef .getDataSetMin ( )
BSF info: Insert new rows at line: 0 column: columnNo
if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \nselect\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getTable("L","INT_NAME","A")) ;
out.print(" \n") ;
} else { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \n\nselect\n ") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n ") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nFROM (\t\n") ;
for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){out.print("\n") ;
out.print(odiRef.getDataSet(i, "Operator")) ;
out.print("\nselect \t") ;
out.print(odiRef.getPop("DISTINCT_ROWS")) ;
out.print("\n\t") ;
out.print(odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getFrom(i)) ;
out.print("\nwhere\t") ;
if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { out.print("\n\tJRN_FLAG <> 'D'\t") ;
} else {out.print("\t(1=1)\t") ;
} out.print("\n") ;
out.print(odiRef.getJoin(i)) ;
out.print("\n") ;
out.print(odiRef.getFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getJrnFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getGrpBy(i)) ;
out.print("\n") ;
out.print(odiRef.getHaving(i)) ;
out.print("\n") ;
}out.print("\n) ") ;
out.print(odiRef.getInfo("DEST_TAB_ALIAS_WORD")) ;
out.print(" ODI_GET_FROM\n\n") ;
} out.print("\n") ;
****** ORIGINAL TEXT ******
<%if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
from <%=odiRef.getTable("L","INT_NAME","A")%>
<% } else { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
FROM (
<%for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select <%=odiRef.getPop("DISTINCT_ROWS")%>
<%=odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from <%=odiRef.getFrom(i)%>
where <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
JRN_FLAG <> 'D' <%} else {%> (1=1) <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
) <%=odiRef.getInfo("DEST_TAB_ALIAS_WORD")%> ODI_GET_FROM
<% } %>
Any suggestions are highly appreciated.
MikeHi Santy,
No, no error or bad files.
Actually the data are moved correctly into the temp table created by ODI, but not from there to the final target table.
I found out the reason though, the knowledge modules imported were from another ODI installation!
I made sure to import the proper KM and it worked.
Thanks! -
Data Protector backup integration fails after upgrade to Oracle 11.2.0.2
After upgrading a system from Oracle 10.2.0.2 to 11.2.0.2, the Data Protector backup integration fails with error
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
Backup session 2011/04/28-74 started.
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
OB2BAR application on "<sap_host>.<domain>" successfully started.
/usr/sap/<SID>/SYS/exe/run/brbackup: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
BRBACKUP /usr/sap/<SID>/SYS/exe/run/brbackup -t online -d util_file_online -c -m all -u system/******** returned 127
/usr/sap/<SID>/SYS/exe/run/brarchive: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
BRARCHIVE /usr/sap/<SID>/SYS/exe/run/brarchive -d util_file -s -c -u system/******** returned 127
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
OB2BAR application on "<sap_host>.<domain>" disconnected.
[Critical] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
None of the Disk Agents completed successfully.
Session has failed.
We checked the configuration, tried linking /oracle/client/11x_64 to 10x_64, removing the link and renewing the 10x_64 oracle client, but still Data Protector can't find the library libclntsh.so.10.1. A new system which was installed with Oracle 11.2.0.2 doesn't have any problems with online backups.
Any help is appreciated!Hi,
did you create the other link according to the upgrade guide (point 5.5) ?
You need to create this link so that BR*Tools
(which is linked to the Oracle 10.2 client)
can use the newer Oracle 11.2 clients.
After the software installation has finished,
create a symbolic link in $ORACLE_HOME/lib as follows:
cd $ORACLE_HOME/lib
ln u2013s libnnz11.so libnnz10.so
or (HP-UX)
ln u2013s libnnz11.sl libnnz10.sl
Volker
Second part: For the DP job, there can be set different environment settings inside the DP job.
Did you check if there are still relicts from the previous release ?
You could integrate a small pre-exec script into the job and let it plot the output of
id
env
set
to a logfile, just to see which values the backup is using.
Edited by: Volker Borowski on Apr 29, 2011 10:12 AM -
Help! Check data in MS Excel file(JDBC-ODBC)
Hi guys,
I wrote a program that can check data in MS Excel file.
User can input a sentence like "1->2" ,"1->3" (one determine one), then the program can find the data which violate the integrity constrains(functional dependency).For example, if we have the functional dependency "TSeq_gi->TSeq_accver", the program looks for two or more tuples with the same "TSeq_gi" value but the different "TSeq_accver" value in Excel file. These tuples violate the integrity constraint. But now,I can't figure out how to modify this program to multiple determine one. (like 1 3->5 or 1 3 4 5->7) . 1 3 ->5 means: look for 1 and 3 have same value but 5 different. I get stuck. Can some experts help me?
The code and Excel file are in below link. Download and play it! Thank you~~
Karen.
http://us.f1f.yahoofs.com/bc/665bbb4/bc/Java/code.zip?bf6cljAB_wgRYVQf
PS: You need to set up JDBC ODBC driver in MS windows "Administrative Tools" first. Data Souce name is Test .
Main logic class:
class MyActionListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (e.getActionCommand()=="SEARCH")
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con1= DriverManager.getConnection("jdbc:odbc:Test");
stmt2= con1.createStatement();
input1 = new String(pathTf.getText());
main_loop: while(true){
if (input1.equals("0")){
// break out of while(1)
break main_loop;
st= new StringTokenizer(input1," ,-=>");
while(st.hasMoreTokens()){
// analyze the input stream.
// Attention, the program didn't do the input value check.
input1= st.nextToken();
input2= st.nextToken();
query= "select "+ schema[Integer.parseInt(input1)-1]+ ","+ schema[Integer.parseInt(input2)-1]+ " from [Sheet1$]";
rs2= stmt2.executeQuery(query);
rowCounter= 0;
list1.clear();
list2.clear();
list3.clear();
while(rs2.next()){
// increase the row counter
rowCounter++;
// initial the flag
col1= rs2.getString(1);
col2= rs2.getString(2);
// for the initalization
if (list1.isEmpty()){
list1.addElement(col1);
list2.addElement(col2);
row="Row 2";
list3.addElement(row);
// compare weather exist dependance
else
for (int i=0;i<list1.size();i++){
// if col1 match with the first part of value in the list
if (((String)list1.get(i)).equals(col1)){
// The independence pair match
if (((String)list2.get(i)).equals(col2)){
break;
else
textArea.append("\n"+"Violate Integrity Constraints Found : "+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
System.out.println("\n"+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
break;
// if col1 not match with any value, add a new record in list
else
list1.addElement(col1);
list2.addElement(col2);
row="Row "+ (rowCounter+1);
list3.addElement(row);
}// end of for
}//end of else
}//end of while
}//end of while(1): main_loop
}catch(Exception ex){
//System.err.println(ex);sorry~~I am new here!
class MyActionListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (e.getActionCommand()=="SEARCH")
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con1= DriverManager.getConnection("jdbc:odbc:Test");
stmt2= con1.createStatement();
input1 = new String(pathTf.getText());
main_loop: while(true){
if (input1.equals("0")){
// break out of while(1)
break main_loop;
st= new StringTokenizer(input1," ,-=>");
while(st.hasMoreTokens()){
// analyze the input stream.
input1= st.nextToken();
input2= st.nextToken();
query= "select "+ schema[Integer.parseInt(input1)-1]+ ","+ schema[Integer.parseInt(input2)-1]+ " from [Sheet1$]";
rs2= stmt2.executeQuery(query);
rowCounter= 0;
list1.clear();
list2.clear();
list3.clear();
while(rs2.next()){
// increase the row counter
rowCounter++;
// initial the flag
col1= rs2.getString(1);
col2= rs2.getString(2);
// for the initalization
if (list1.isEmpty()){
list1.addElement(col1);
list2.addElement(col2);
row="Row 2";
list3.addElement(row);
// compare weather exist dependance
else
for (int i=0;i<list1.size();i++){
// if col1 match with the first part of value in the list
if (((String)list1.get(i)).equals(col1)){
// The independence pair match
if (((String)list2.get(i)).equals(col2)){
break;
else
textArea.append("\n"+"Violate Integrity Constraints Found : "+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
System.out.println("\n"+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
break;
// if col1 not match with any value, add a new record in list
else
list1.addElement(col1);
list2.addElement(col2);
row="Row "+ (rowCounter+1);
list3.addElement(row);
}// end of for
}//end of else
}//end of while
}//end of while(1): main_loop
}catch(Exception ex){
//System.err.println(ex);
} -
Error to import SAP-WEC sca : integration failed
Hello there,
We are one NWDI 7.3 in CM Services.
We are meeting some difficulties to import the SAP-WEC sca file.
This sca is marked "to be developped" in the Software Definition Component.
We would like to import SAP-WEC (and SAP-WEC-FRW) with "Import sources Overwriting modifications" as actions.
But this operation has failded, we have checked the cbs log, it ends with the following message :
Integration of activities in compartment "sap.com_SAP-WEC" started at 2014-11-07 17:18:29.489 GMT
Integration of 1 activities in compartment "sap.com_SAP-WEC" finished at 2014-11-07 17:28:40.486 GMT and took 10 m 10 s 997 ms
An incomplete integration in compartment "sap.com_SAP-WEC" of buildspace "DJP" has resulted because of errors during request processing!
Request 1765 has been created to re-initialize the compartment
===== Post-Processing ===== finished at 2014-11-07 17:28:40.580 GMT and took 10 m 37 s 237 ms
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. Integration failed with unexpected CONFLICT status [com.sap.dtr.client.lib.protocol.entities.ErrorEntity@10b70d3e]. Request FAILED.
REQUEST PROCESSING finished at 2014-11-07 17:28:40.751 GMT and took 11 m 8 s 874 ms
We can see just at the bottom of the error message :
Synchronize metadata for [sap.com/wec/esrv/mc/servicerequest/ui] finished at 2014-11-07 17:17:42.922 GMT and took 16 ms
< CREATE > ''sap.com/wec/esrv/mc/servicerequest/ui'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/bo'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/dpu'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/md'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/ui'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/bo'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/dpu'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/md'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/ui'' DC
< IGNORE > ''sap.com/wec/examples/core/app'' DC
< IGNORE > ''sap.com/wec/examples/mc/main/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/main/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/app'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/cust'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/ui'' DC
< IGNORE > ''sap.com/wec/examples/sflight/app'' DC
< IGNORE > ''sap.com/wec/examples/sflight/leanapp'' DC
< IGNORE > ''sap.com/wec/examples/sflight/leanwebapp'' DC
< IGNORE > ''sap.com/wec/examples/sflight/webapp'' DC
< IGNORE > ''sap.com/wec/examples/tc/common/util'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/bo'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/md'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/user'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/app'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/common'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/dic'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/ejb'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/common'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/dic'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/ejb'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/rt'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/ui'' DC
< IGNORE > ''sap.com/wec/frw/tc/bookmarking'' DC
< IGNORE > ''sap.com/wec/frw/tc/common'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/app/config'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/bec/ejb'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/dic'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/ejb'' DC
< IGNORE > ''sap.com/wec/frw/tc/commons/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/core'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/app'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/includes'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/jbol'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/webapp'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher/app'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher/webapp'' DC
< IGNORE > ''sap.com/wec/frw/tc/ejb3unit'' DC
< IGNORE > ''sap.com/wec/frw/tc/ejb3unit/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/facelets/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexbuild'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexcompc'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexmvc'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/moduledev/edit'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/moduledev/editor'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/plugins/xhtmleditor'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/common'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/core'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/editors'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/logging'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/modulecreation'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/selenium'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/validation'' DC
< IGNORE > ''sap.com/wec/frw/tc/ideplugin/moduledev'' DC
< IGNORE > ''sap.com/wec/frw/tc/j4fry'' DC
< IGNORE > ''sap.com/wec/frw/tc/jquery/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfextensions'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfextensions/processsflow'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfflex'' DC
< IGNORE > ''sap.com/wec/frw/tc/json/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/modules'' DC
< IGNORE > ''sap.com/wec/frw/tc/modules/metadata'' DC
< IGNORE > ''sap.com/wec/frw/tc/postbuild'' DC
< IGNORE > ''sap.com/wec/frw/tc/prettyurl'' DC
< IGNORE > ''sap.com/wec/frw/tc/selenium/drivers'' DC
< IGNORE > ''sap.com/wec/frw/tc/selenium/server'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/bo'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/md'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/ui'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/template'' DC
< IGNORE > ''sap.com/wec/frw/tc/unittesting'' DC
< IGNORE > ''sap.com/wec/frw/tc/velocity/lib'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/bo'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/ui'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/main/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/main/ui'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/bo'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/ui'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/checkout/md'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/checkout/ui'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/bo'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/md'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/ui'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/bo'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/md'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/ui'' DC
< IGNORE > ''sap.com/wec/temp/wec/comm/mc/mdm/trans'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/ui'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/common'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/ui'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/ui'' DC
< IGNORE > ''sap.com/wec/trade/dpu'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/bo'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/md'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/ui'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/bo'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/md'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/ui'' DC
we have also checked the current cbs request, in fact it the activation process which always failed and the total DC for this component is still to 0.
What can we do to import the SAP-WEC sca sources ?
thank you.Hi Jean-Yves,
Hope you are doing good.
You are right, the error is not too clear:
Error! Communication error when performing integrations. Integration failed with unexpected CONFLICT status [com.sap.dtr.client.lib.protocol.entities.ErrorEntity@10b70d3e]. Request FAILED.
REQUEST PROCESSING finished at 2014-11-07 17:28:40.751 GMT and took 11 m 8 s 874 ms
Kindly run the web diag tool as outlined in SAP Note No. 1227928: Diagtool for troubleshooting NWDI (detailed logs) and reproduce the issue. Also add in the locations:
com.sap.tc.cbs.server.proc.impl
com.sap.dtr.client.lib.protocol.entities
This should have more details on the error.
Thank you!
Kind Regards,
Hemanth
SAP AGS -
I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.
Maybe you are looking for
-
Power Mac G4 MDD with 1.5 GB RAM slows to a crawl
My Power Mac G4 MDD has been getting slower and slower for the past couple of years, and now it takes forever to do a lot of things that it did quickly before. Today it even told me it didn't have enough RAM available to open Photoshop, even though I
-
I've adopted the oss2jack and fusd-kor packages, but need help
Some people are still using this software (and I'm eyeing it) and I felt I should do them a favor. Problem is, I'll need some help. For fusd-kor, the PKGBUILD looks like this: # Contributor: nut543 <[email protected]> # Contributor: Shadowhand <woody.gi
-
Mac Pro restarting spontaneously
Within a few minutes of starting the Mac Pro up it shut it self down and restarted. It's done this before but some times restarts by itself a couple of times before settling. A previous time it restated but with the fans flat out. This restarting pro
-
Alternative for multiple inheritance (AbstractQueue and AbstractList)
Hello all, What is the best alternative for multiple inheritance? I want to make a list, which supports queue operations. Both AbstractQueue en AbstractList are useful, so I would like to use them both, instead of implementing the methods myself or c
-
SBOE XI 3.1 SP3 FixPack Installation/Deployment - Question...
Hello to all, Operation System - AIX 5.3 (AIX 5L) Database - Oracle DB We have installed SAP Business Objects Enterprise (SBOE) XI 3.1 SP3 with FixPack 3.2 and we want to apply the FixPack 3.4. I´ve been read the installation/deployment guide - "SAP