Database file 4 failed verification check

Hello,
When I start database, message displayed as
follows:
ORA-01122: database file 4 failed verification check
ORA-01110: data file 4: '/usr/nas/databases/D1/DADM/oracle/datafiles/DADM_rollback1.dbf'
ORA-01251: Unknown File Header Version read for file number 4
Database is not started up.
I need help how to fix it.
Thanks in advance
null

Dear,
This error says that urs current datafile is corrupted their are two to three solution on which we can work out.......
1.if urs database is in Archive log then do the following
a) shutdown the database
b) start mount
c) make sure that u have all the archive log file in the directory where they should be
d) recover database, then it will ask all archive log file just press enter or write Auto their,
2) If urs database is not in Archive log then u have restore from urs lsat backuup.
3) If this datafile if not very much in use u can make it offline and start urs database.
null

Similar Messages

ORA-01122: database file 58 failed verification check

Hi All,
I have lost one of my datafile while moving them from 1 drive to another. I am getting the following error while trying to start the database:
ORA-01122: database file 58 failed verification check
ORA-01110: data file 58: 'G:\ORACLE\R3E\SAPDATA7\R3E700_25\R3E700.DATA25'
ORA-01251: Unknown File Header Version read for file number 58
Please suggest what can be done to correct the error. Also I don't have a backup.
Suman

- open http://service.sap.com/notes
- enter "ORA-01251"
- you will find Note 696141 - Composite SAP Note: ORA-01122
and that section:
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Markus

ORA-01122: database file 30 failed verification check

SQL*Plus: Release 10.1.0.4.2 - Production on Wed Feb 13 20:33:13 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
when starting the DB for 10gAS get following error, db is started but cannot sign in
SQL> SQL> Connected.
SQL> ALTER DATABASE open
ERROR at line 1:
ORA-01122: database file 30 failed verification check
ORA-01110: data file 30: 'D:\ORACLE\ORADATA\PRT\APPS003_A.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options

You have a mismatch in the control file and data file scn numbers. What was done before the database was getting started? I once saw this error when some one moved one file from another munt point to another and there was no rename give to the control file and the control file got no idea which is this new file and where it had come from?
Try finding the control file which is of the same backup as of this datafile.
Aman....

Database file 1 failed verification check on standby

Hi ,
i m getting a trouble on my physical standby database(Oracle 10g Enterprise edition).
I have taken standby controlfile backup from production . And Restored it on Standby database then i m getting following errors :
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'E:\ORACLE\PRODUCT\ORADATA\TESTDR\SYSTEM01.DBF'
ORA-01206: file is not part of this database - wrong database id
My production aND standby database ID are same :
Edited by: user12045405 on Nov 6, 2012 11:16 AM

Check this
http://oracleinstance.blogspot.in/2010/08/ora-01122-ora-01110-ora-01206-after.html

ORA-01122: database file 8 failed verification check

trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Apr 29 17:57:51 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno      00
M sid        DEV
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2816
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
M DpShMCreate: sizeof(file_adm) 208064 (72)
M DpShMCreate: sizeof(vmc_adm) 18720 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
M DpShMCreate: allocated sys_adm at 08750040
M DpShMCreate: allocated wp_adm at 08751E40
M DpShMCreate: allocated tm_adm_list at 087565C0
M DpShMCreate: allocated tm_adm at 087565F0
M DpShMCreate: allocated wp_ca_adm at 08B25890
M DpShMCreate: allocated appc_ca_adm at 08B2B650
M DpShMCreate: allocated comm_adm at 08B2D590
M DpShMCreate: allocated file_adm at 08BAE450
M DpShMCreate: allocated vmc_adm_list at 08BE1110
M DpShMCreate: allocated gw_adm at 08BE1150
M DpShMCreate: allocated vmc_adm at 08BE1180
M DpShMCreate: allocated ca_info at 08BE5AA0
M DpShMCreate: allocated wall_adm at 08BE5AA8
M DpSesCreateTable: attached session table at 06440040 (len=138424)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Tue Apr 29 17:57:52 2014
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcInit2: o.k.
M
M Tue Apr 29 17:57:53 2014
M ThInit: running on host sapecc6
M
M Tue Apr 29 17:57:54 2014
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06C34308   06C398A4   06C3912C
C Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C
C Tue Apr 29 17:57:55 2014
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06C34308   06C398A4   06C3912C
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20140429 175754 SAPECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
M ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
J
J Tue Apr 29 17:57:57 2014
J extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
J extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
J extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
J extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
J extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
J extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
J extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
J extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
J extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
J extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
J extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
J extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
J extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
J extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
J extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
J extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
J extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
J extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
J extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
J extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
J extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
J extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
J extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
J extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
J extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
J extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
J extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
J extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
J extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
J extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
J extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
J extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
J extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
J extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
J extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
J extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
J extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
J extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
J extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
J extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
J extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
J extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
J extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
J extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
J extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
J extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
J extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
J extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
J extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
J extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
J extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
J extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
J extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
J extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
J extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
J extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
J extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
J extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
J extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
J extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
J extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
J extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
J extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
J extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
J extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
J extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
J extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
J extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
J extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
J extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
J extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
J extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
J extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
J extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
J extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
J extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
J extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
J extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
J extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
J setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
J getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
J getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
J getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
J getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
J getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
J selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
J rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
J sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
J selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
J proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
J extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
J getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
J getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
J getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
J getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
J isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
J getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
J createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
J statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
J openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
J closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
J intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
J extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
J extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
J extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
J extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
J extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
J extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
J extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
J extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
J extCheckForCleanup is set to <null>
J extJvmxInit2 is set to <null>
J extJvmxCleanup is set to <null>
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
I
I Tue Apr 29 17:58:05 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
M SHM_ROLL_AREA (addr: 59250040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0C170040, size: 615040)
M SHM_PAGING_ADM (addr: 0C210040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C
C Tue Apr 29 17:58:06 2014
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c    12548]
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BYL=> DBQ action required because of database error            [dbsh#2 @ 1100] [dbsh    1100 ]
B SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
B ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
B ***LOG BY4=> sql error 376    performing SEL on table DDNTT      [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c   2047]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1494]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
M * ERROR       ThInit: ThIPCInit
M *
M * TIME        Tue Apr 29 17:58:06 2014
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          17
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c   327]
sql>select status from v$datafile;
status
One of my datafile status is 'RECOVER'
SQL>recover datafile 8;
ora_00283 recover session cancelled due to errors
ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Please give me the suggestion..
Best regards
nani

Hi K Nani,
From your error message
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Looks like Data file is corrupted.
You may refer SAP note 696141 - Composite SAP Note: ORA-01122
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
           Otherwise: Restore/recovery
Only solution here is restore the database from backup.
Alternate solution If it is a non-production system.
If the file is corrupted, then take the datafile offline and open the database.
Hope this helps
Regards,
Deepak Kori

IMP-00010: not a valid export file, header failed verification

Hi everyone,
I am new in oracle's world, and I've been working with an export from a sun platform, and I try to import to a windows platform. I've been receiving this message error
IMP-00010: not a valid export file, header failed verification
Please, help me I have to finish with that today..
Thanks and have a nice New Year

thanks for your answer.
sorry, but I don't have all exact information, because that export is comming from a client, and I don't know all information. I only know that the platform is sun.
I received the file via an usb memory, directly from the source.
I've been read that if you make an export in sun platform and it isn't as binary when you transfer it to a windows platform, it will be corrupt.
Could you confirm me that?

Database file changed ora-01251   how to solve?

hai all,
database file changed ora-01251 how to solve?
suddenly changed when i try to connect Oracle Management server(OMS)
thanks
rcs
=======
os:winxp
db:Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
SQL> Recover database
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
ORA-01122: database file 9 failed verification check
ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
ORA-01251: Unknown File Header Version read for file number 9
WRONG FILE TYPE
F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA
========

Hi..
Would like to know if any changes were done before this error popped up..
From metalink :--
>
Error:     ORA-1251
Text:     Unknown File Header Version read for file number %s
Cause:     Read of the file header returned a record but its version cannot be
     identified. Either the header has been corrupted, or the file is not a
     valid database file.
Action:     Have the operating system make the correct file available to the
     database, or recover the file.
>
If the file is corrupted, then take the datafile offline and open the database.If it was renamed, then you can check metalink Doc ID:      230449.1
if the database is in archive log mode, you can refer to metalink Doc ID: 333620.1
HTH
Anand

Large .dmg downloads fail verification

I've recently encountered large downloaded .dmg files which fail verification, with the error codec overrun. Safari seems to be worse than Firefox but both have the problem.
Is this just my connection (fixed wireless) or something wrong with OSX?

Thanks but
a) I already searched the discussions and saw a variety of unresolved issues similar to mine and
b) My ISP delivers internet to me via Fixed Wireless - I live in the mountains and this is the only way to get broadband (wispertel.com and it is nice and fast). I am ethernet connected to a router which is ethernet connected to an antenna on my roof, but that is as direct as I can get. Do you suspect that's the culprit?

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed Cannot execute configure of database using RapidClone

dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

dear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Oracle UCM fails to check in text/xml files

We have an Oracle UCM server that is failing to check in xml files over a certain size - I haven't narrowed down the size limit yet, but a <100kb file will work 100% of the time, while 300+ Kb xml files fail almost all the time, though there has been some success. Image files and zip file succeed on new check ins 100% of the time as well. We have tried with the SOAP API and the UCM new check in form - in both cases we get an empty repsonse from the server. In firefox we get the "The connection was reset" page. I'm at a loss as to explain why, but I have almost no experience with Oracle UCM. This particular server has been running for over a year happily accepting xml files of all sizes, then one day just stopped - as far as I am aware, nobody changed any
settings/upgraded anything/changed network topology.
When I look in the server output, I don't really see any indication of failure or find any mention of the file name or content title like I do when a file successfully checks in.
I have already asked the DBA to drop and rebuild the database index, started the Collection rebuild cycle (it finished successfully) and turned on the webless file store option on the defaultfilestore provider.
UCS Version : 10.1.3.3.3 (080807) (Build:7.2.2.188)
Database : Microsoft SQL Server 09.00.4035 currently using DATABASE.METADATA though I think it was at one point using Full text search, but the database was not.
Java Version:1.6.0
Please ask if there is any other information you need, but I do not have physical access to the machine, and I may not be able to reveal certain info due to privacy/security concerns.

Hello,
I think you should open an SR with support to help out. Be that as it may, here's some observations/suggestions...
* You are running a 4-year old content server. There have been numerous fixes since then. Your system may have grown to a point where it's hit one of the older issues.
* Is it possible the XML encoding may have changed? i.e. that whatever generates the XML files is now generating them slightly differently and therefore the encoding is different so check-in doesn't follow the same rules? I'd look at the first line of older files versus the new files which fail. If there's a difference, refer to KM note 978689.1 in our knowledge base.
* You say there doesn't appear to be anything in the logs, so let's increase them:
- Login to UCM as Administrator. Go to Administration->System Audit Information. Switch on the Full Verbose Tracing checkbox. In the Active Sections field, put in:
systemdatabase - this will show you what queries and inserts are made to the database and should show whether there's a problem at that level.
requestaudit - this shows you the requests as they come in, as well as a roundup of all requests every 2 minutes. If you see large amounts of time being taken on requests, your server could be creaking because of resources.
publish - tells you about publishing related issues, most XML file check-ins are related to this.
- Try to check in a file which should fail.
- Switch off verbose logging (see above) to reduce overhead.
If the OS is Windows then the <install>/config.cfg file needs to have UseRedirectedOutput=true in order to generate a log file for this tracing. On Windows the file is the <install>/bin/IdcServerNT.log file. (if the above config is set)
On *nix it is in the <install>/etc/log file (notice that there is no file extension on the file)
If none of the logs helps you, an SR is probably in order.
Regards,
Frank.

Excel Source - Opening a rowset for "EFT$" failed. Check that the object exists in the database.

Why oh why do I sometimes get this error when defining my Excel Source and then sometimes I do not?
Am I doing something wrong here???
The error is...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [[Excel Source[27]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [27}}: Opening a rowset for "EFT$" failed. Check that the object exists in the database.
I know the Worksheet "EFT" exists because I defined this previously for the same Excel spreadsheet.
Thanks for your review and am hopeful for a reply.
PSULionRP

A reply from CozyRoc must be hitting the nail on the head
sheet name contains $
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ce0fbff5-f5f1-4a4a-9c29-6adc32b0fd79/using-excel-file-as-source-in-data-flow-task-of-ssis-bi-2005-need-example-of-sheetnamecellrange?forum=sqlintegrationservices
Arthur My Blog

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Error : Opening a rowset for "Sheet$" failed. Check that the object exists in the database.

Hi,
i am trying to load the data from excel sheet using For each loop container in ssis 2005.
But it gave me the below error:
Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
[DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
Error: There were errors during task validation.
Could you please let me know the solution
Regards
Sqlstud

That message usually means validation has failed;
Have any of the underlying tables changed? Data types, lengths, maybe even column ordering, etc...?
try this..
Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/
Thanks ETL.
Everything is fine..(Datatypes,length,orderings etc)
Already i have set
DelayValidation =TRUE.
IS there any other problem?
Regards
Sqlstud

Database file 4 failed verification check

Similar Messages

Maybe you are looking for