Check your PCI latency, may cause issu

I , for the most part in my bios had PCI lat at 32. It was stable and no issue.
Since getting a ZS i had a few instability issues.
I then set PCI latency back to 64 and all seems fine now.
If you dont have this option ( your Mobo must be old man ) then get PCI tweak tool from guru3d.com and set it to 64. If its already at 64 try 32 or 28. Have a play with it.
Its just a thought but hey, if it works all the better then.

Oh, i am no expert on PCI late ( someone correct me if I am wrong ) but its the time it takes for a device to send info/data to and from along the bus. When a device is needed it takes priority over others. Sometime having it set to 32 will force a device to use the bus even if it is not requested, thus instability.
Hope it hel
ps.

Similar Messages

Latency(ASIO Buffer)Issues, Share Your Support! On Behalf of newbies......!!

I think most of us here gone through these problems. Especially a newbie who just started with his or her home Studio or Composition.
What we face most is a Delay on real time recording of the instruments or if you creating music through MIDInterface. We got a slite delay between Recorded and played Note. Thats the case, I'm also facing now. So i dedicate this thrade if its being popular to a newcomer(newbie) & a expert one who can help out of this problem.
I just bought a EMU0404(pci) sound card. and in reason its not so perfect when i playing it through my Sythesizer (Roland E-16) My PC Configuration is : P-IV 3.0 (HT), MOTHERBOARD D101 With Shared undedicated 256mb of my system RAM, 768mb OF DDR(400) RAM, A SEAGATE 80GB (SATA) HDD.
I have configured Reason (Steps for who dont know how to configure reason : Click Edit > Preferences > Select Audio from Page > Select the proper Audio Card Driver > if DirectX driver then Configure the Slider of Buffer Size , if a Asio Driver Like Emu-Asio, Asio4all or what ever it Installed > configure it through its Control Panel below of that page) at 440 samples of a output latency of 9ms. but still it have a slight latency problem.
And in Fruity Loops it's not working properly too. but we will discuss it later.
I have some questions Like:
a)What is Latency Compensation?
b)Do we Exceed the RAM Limit?
c)Do we Exceed the Processor?
d)Do we have to buy a Workstation?
and many more...........
I have problem with the Rewired part too, with Nuendo3 or Cubasis too. but still it will be after that.
So Please, The expertise here can share their experiences with us. Many thanks at advance.
Eagerly waiting for your sujjestion too Come....... From "Help Gurus"

You should be able to work using 2-5.8 ms (96-256 samples) w/ your 3GHz/HT PC (IIRC, HT and SATA may cause problems) using software instruments (and even lower settings when using Rolands HW synth as playback device). There are some extra latency coming from MIDI connections:
MIDI keyboard internal response to keystroke -- this is not instantaneous but on a good keyboard should be under 1 msec or so
MIDI transport latency
- If you're using MIDI cables, this is 1 msec per note in the chord, before the last note in the chord sounds. In other words, for a 6-note chord, the first note is delayed by 1 msec, the second by 2, etc., to the 6th note that is delayed by 6 msec.
- If you're using MIDI over a high-speed technology like USB, Firewire, or mLAN, there is still transmission latency but the per-note effect is far, far lower -- probably not measurable.
BTW, ASIO is maybe the best device driver for recording use for every system. IIRC, the E-MU WDM driver is not good at all. When you record using direct monitoring (monitor the dry signal only) then, there are normally no hearable latency but, when you want to monitor the wet signal (software effects/instruments added) then you need to use latency settings around 7 ms (4-10 ms) to get the delay avoided. This is not easily achieved when you have project w/ plenty of tracks and plenty of VST/DX effects/instruments added/in use and you want to play everythin in background while recording a new track).
Some thoughts for your guestions:
a) I suppose you'll find a brief explanation for this by googling around. In generally, latency compensation (if available) is done automatically (VST/DX plug-ins) so you don't need to worry 'bout it, or set manually (as like in Sonar 6 for ASIO latency when you set the offset where the recorded data is placed in timeline).
b) RAM limit ? There are known limits as like 2GB/3GB/4GB for program/data space
--> Cubase has well known (~1.5 GB) RAM limit http://forum.cubase.net/phpbb2/viewtopic.php?t=57331 (! continue to the another thread (link in 8th post))
--> you may need to enable IMAGE_FILE_LARGE_ADDRESS_AWARE set in executables image header (see instructions from Cubase.net forum link)
--> you need least 1-2 GB RAM to get most sample based instruments working
--> low amount of RAM like you have there, remember set the virtual memory large enough
--> VST/DX effects and typical VST/DX instruments won't consume much RAM (only sample based does)
c) CPU usage can be controlled by latency settings ...
When you record using plug-ins w/ 'software' monitoring (the way you can hear the plug-ins too), you need to set latency low (~5 ms) to get rid of delay between keypress and heard audio. You have only some methods you can use in this case to get the CPU usage down --> if you have plenty of tracks (w/ plug-ins) playing in background then you may get the CPU usage high --> pops/crackling/dropouts --> freezing tracks is good method then or bouncing (converting) MIDI tracks w/ software instruments to audio tracks, etc. Normally single tracks aren't a problem... you can use 2-5 ms latency settings then w/o troubles.
When you are doing mixing, you can use much higher latency settings (20 - 100 ms).
d) what do you mean by Workstation ... if just a prebuild DAW (Digital Audio Workstation) then aren't those normal PCs/MACs too? If you mean those hardware recording systems then, isn't that a bit expensive path for a E-MU 0404 owner?
ATM, problems comes from latest technology as like from SATA/RAID controllers, PCIe bus (graphics), FireWire Controllers, etc. (like in forums here, these have been mentioned many times along with X-Fi issues).
For E-MU users, E-MU forum - http://www.productionforums.com/index.php?f=52
jutapa
Message Edited by jutapa on 12-18-200610:42 PM

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

When entering my phone serial number it shows "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."

Hi,
I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
Does anybody have any idea what the reason behind this could be.
- First time with iPhone and frustrated.
Briju

If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from.

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

Billing issue."Please check your billing information"

I have a billing issue. This is a persistent problem. I have a pop up window that says that Adobe has a problem with my payment. I go to my account and everything looks fine. I called before and was told that it was fixed and that will not happen again. Well, it did happen again. I will like to talk with a person in charge of billing. I this became beyond annoying. Please see attached document.

Check your transaction history and see if the payments have been going through ok or not--don't post any specific account details, here, because this is a public forum that anyone can read:
https://creative.adobe.com/#account/plans
If this has any bearing on the situation, there was a security breach at Adobe back a month or two, ago, and as a result Adobe apparently reported all the millions of credit-card/debits cards as possibly compromised to the issuing banks, and as a result you may have received a new credit or debug card, which could make the old one invalid.
Regardless of what your transaction history shows, I'd get on a chat session with someone at support and see what you can get accomplished--even if they promised something that didn't materialize, last time. Click the yellow Chat Now button on this page:
http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you.

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.

i am going to buy iphone 5 32 gb from some before i bought i check the serial number of that iphone on apple web site to cross check but massage is appering that ......'
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us....
can any one tell me what is that mean..... replace what ?

In most cases, what you said is true...however, this is not always the case. Take myself for example...
1: I posted my phone online to sell
2: Someone saw my serial number and called AppleCare to get a replacement phone
3: An inferior AppleCare representative bypassed a component validation (check serial number to the device on hand) and approved the replacement under my AppleCare plan.
4: After noticing this (about 4 days after it happened) and a trip to Apple and a call to AppleCare, all was resolved. My phone is back to being covered under AppleCare+
5: I learned my lesson.
So, as you can see, there is a chance that it can be something else. Although, if the person selling the phone notices, it shouldn't take long to resolve it. Chances are that it is what you said.
Hope this helps

We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us. iPhone 4s.

Hi everyone! I have iphone 4s, which was bought about 6 mounts later and has serial number C2*******TD6 and IMEI ****. When i try to check warranty on the page https://selfsolve.apple.com/wcResults.do i see
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
And if i try to enter IMEI here i see
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Does it means, that I was bought a non exist iPhone? Or it was refurbished? I need an official answer to take them to seller because I was bought iPhone as a new.
Thank you.
<Edited By Host>

Not from Apple reseller( Im apologize, that you right) Seconв question: how can i contact apple via email to get an official answer?

Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." However, if I unplug it and then plug it in again, I can connect to it. How can this be corrected without having to unplug it all the time?

Are you using Yosemite??
This is stock standard yosemite bug and we have no simple fix for you..
You can fix it at its source..
Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

How to check which RFCs causing issues in the system and RFC response times

Hi,
We have an issue with the RFC response times in CRM and need investigstion. We need to know which Which RFCs causing issues and how we can solve the problems.
Regards

Hi,
chek the below code
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_EXIST
EXPORTING
FILE = W_FILENAME
RECEIVING
RESULT = W_RESULT
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
WRONG_PARAMETER = 3
NOT_SUPPORTED_BY_GUI = 4
others = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-* MSGNO WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF W_RESULT IS INITIAL.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_EXIST
EXPORTING
DIRECTORY = W_FILENAME
RECEIVING
RESULT = W_RESULT
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
WRONG_PARAMETER = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
ENDIF.
ENDIF.
IF W_RESULT = 'X'.
RC = '1'.
ELSE.
RC = '0'.
ENDIF.
reward if helpful.
Regards,
nagaraj

Oct 10, 2011 2:13 PM I downoland game Zombi Farma for free but I paid 239 dkk.     Here is answer from The Play Forge:        Hi Anna, first of all, please check your receipt again, if you've purchased anything else during the period it might appear as

Oct 10, 2011 2:13 PM
I downoland game Zombi Farma for free but I paid 239 dkk.
Here is answer from The Play Forge:
Hi Anna,
first of all, please check your receipt again,
if you've purchased anything else during the period it might appear as if it's related to Zombie Farm (Apples receipts are a bit hard to read to be honest.)
If this is indeed not the case and you have indeed not purchased anything from us, yet have been charged 239 DKK, there's obviously a big issue.
However, we're not in charge of the money handled in purchases, as Apple has chosen to be the only one controlling this.
As such you'll have to contact Apples support to get help with refunds.
You'll find it at http://www.apple.com/support/itunes/
We're sorry for any inconvenience this has caused you. :/
Ana here is receipt from my email:
Billed To:
                                   [email protected]
                                                   Anna Szczawinska
             Arildsgard30 , sttv
                                       2700 Bronshoj
                      DNK
Order Number: M2M4K45SK5
           Receipt Date:           10/10/11
           Order Total: 239.00Kr
           Billed To: MasterCard .... 9754
Item
Artist
Type
Unit Price
                                            Zombie Farm, 50 Brains, Developer: The Playforge, LLC
                                                                                                                      Report a Problem
                                           The Playforge, LLC
                                           In App Purchase
239.00Kr
Order Total:
239.00Kr
                                                                    Please retain for your records
              Please See Below For Terms And Conditions Pertaining To This Order.
              iTunes Store
              You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
                            Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/

The Zombie Farms game is free but "in App" purchases during game play are not. You are being charged for the purchase of "50 brains" not for the game itself.
Note that if you purchased this game after entering your password, etc. there may be a period of time where someone can play the game and make purchases without needing to re-enter the password.
Did you give your iPod to your children to play this game?
Also, this is a user-to-user technical help forum you aren't speaking to Apple or Play Forge here. We are all just users like you here and can't issue any refunds.

Setting 1 dimension in ROLAP mode cause issues, the system try to filter on dynamic set names!

Hi,
I suffer a strange behavior.
I have an SSAS 2014 solution which works fine.
I do some test to convert 1 dimension in ROLAP mode.
(all the other dimensions and partitions are MOLAP only)
after this I cant process any cube!!!
even a process clear or structure runs forever!!!
the server call the dimension and try to filter the attributes using the name of dynamic sets setup in my cube! a real non-sense!
I have a dynamic set in my cube called "SelectedStores"
and during the process clear or structure, SSAS try to filter my dimension using this dynamic set.
so for sure this values doesn't exists in my dimension.
Also a lot of errors like the following are generated:
OLE DB error: OLE DB or ODBC error: Conversion failed when converting the nvarchar value 'SelectedStores' to data type int.; 22018.
its a big non-sense!!!
any idea on the cause for this?
thanks.

Hi Willgart,
According to your description, you get conversion error after you change the storage into ROLAP. Right?
After you change into ROLAP, it seems there is something (structure/definition) changed in the underlying table. Please use the BIDSHelper to check the issue:
Dimension Data Type Discrepancy Check
Dimension Health Check
In this scenario, does you dynamic set is used in calculated member and involve both MOLAP and ROLAP dimension? It may cause some mismatch issue. Please refer to links below:
Error Messages during process of ROLAP dimension when using DYNAMIC SET
in CALCULATE MEMBERs
SSAS cube failing for storage mode Rolap
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Check your PCI latency, may cause issu

Similar Messages

Maybe you are looking for