EXP: Export all tables for one user except the contents of one table

I need to export all tables (> 100 Tables) of an user except the contents of one table. Is there a possibility to call the EXP command and exclude the one table ??
Thanks in advance .-)
(Oracle11G)
Edited by: gromit on Feb 14, 2011 4:41 AM

It is not possible to perform it from a client. Is this correct? The datapump task itself can be started from a client, but - you are right - datapump is server-based. Especially that refers to the dumpfile location, which has to be defined as DIRECTORY on the server:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_overview.htm#i1007107
Werner

Similar Messages

IWDClientUser Object for Other User not the Logged In one

Hi
I am using Uploading a file to KM using Webdynpro,
But i don't have permissions for all the users to create file in KM
Now,
in the program irrespective of the logged in user, i want to get
IResourceContext object for different user who have the permissions.
so that i can create a file in KM.
I am using the code.
IWDClientUser wdClientUser = WDClientUser.getClientUser("J2EE_ADMIN");
com.sap.security.api.IUser sapUser = wdClientUser.getSAPUser();
com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
IResourceContext resourceContext = new ResourceContext(ep5User);
the first statement is fetching IWDClientUser Object as the logged in user but not the J2EE_ADMIN.
Need Help!!.
Regards
Abhimanyu L
Message was edited by:
Abhimanyu Lagishetti

Solved
There are service Users in portal i have used cmadmin_service user instead j2ee_admin and it works.
Regards
Abhimanyu L

How to export ALL my contact groups ( 20) from Outlook 2010 on one machine to Outlook 2010 on two other machines

My problem is how to export ALL my contact groups (>20) from Outlook 2010 on one machine (finally established with great pains from a more user-friendly client) to Outlook 2010 on two other computers. All the help files I've seen refer to
export/import of only a single Group.
Outlook seems to be an extraordinarily limited and user-hostile environment for managing an address book. By way of comparison, the Mulberry client I've been using for years (which is no longer supported) run circles around Outlook for ease of
handling -- everything in the address book, groups and individual, can be exported and imported in a single file. My computer support staff have warned me about the difficulties of handling groups in Outlook. Is Microsoft really that incompetent,
or just sadistic ?
Thanks for your help with this.

After a lot of screwing around I finally hit on a solution, which is to export and import contacts using a .pst file (which transfers both individuals and groups) rather than a .csv file -- which transfers only individual contacts but leaves groups untouched.
Why isn't there a clear and simple message from Microsoft saying this in all the so-called Help files on moving contacts in Outlook?

After upgrading to iOS7 I lost all sound for my 4S except for the ring when someone calls. I can't listen to music, I don't get text or email notifications. I have tried rebooting?

Following upgrading to iOS7 I lost all sound for my 4s except for the ring when someone calls. I can't listen to music, I don't get text or email notifications. I have tried a wipe and reinstall, I've tried hard rebooting, I tried erasing all of my music and reinstalling it, I checked my Do Not Disturb, and I tried the AssistiveTouch mute button. Nothing. I can't even play music through bluetooth or headphones. Can anyone help please as its driving me mad!

I experience this problem too. I am using iPhone4 and just upgrade it to iOS7. And now I can not make outgoing call. I checked all the setting, and nothing wrong. I even replaced my sim card with the new one, still can not help.
I read this link
https://discussions.apple.com/thread/5322252
and I try dial *#31#, it help, but not permanent solution.

Get all Groups for current user

Hi I try to get all groups for the current logged on user. This is what I do:
First I try to search with the IGruopSearchFilter to obtain all unique Group IDs. I always get an proxy error by doing this, maybe the query is to much.
Then I want to use the method group.isUserMember(user.getUniqueID() to check whether the user is a member of that group or not.
Is there a better way to obtain all groups for a user (without using a query IGroupSearchFilter)?
Thanks ahead for your help.
Burkhardt

Burkhadrt,
have you tried this?
https://media.sdn.sap.com/javadocs/preNW04/SP2/60_sp2_javadocs/ume/com/sap/security/api/IUser.html#getParentGroups(boolean)
This should give you an iterator for all groups the given user is assigned to.
Hope it helps... and if so:
if (helpful) {
points++
Regards,
Dominik

Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again I tried all but nothing, everything works except the call I have an iPhone 4 Version 6.1.3

every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
I tried all but nothing, everything works except the call
I have an iPhone 4 Version 6.1.3
thank you for your help

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

How to export all tracks into audio files with the same duration

Hi everybody.
I am trying to export all the tracks into different audio files.
It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
Thanks!!
Alessandro

sambino wrote:
I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
each track is composed not only by played instruments but also by moments of silence.
Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
iSchwartz wrote:
exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

Only one user at the time can execute VE01 (due to blockage of VEIAV)

Hi,
As I understand it only one user at the time can execute VE01 (or MEIS for arrivals). If someone is already executing the VE01 transaction the error-message "Table VEIAV is blocked by user XX" appears. It does not matter if one tries to execute it for different legal entities - no parallel processing seems to be possible.
This is a huge limitation for a global concern with many entities operating in the same SAP instance. Does anyone recognize this problem and are there any ways to get around it? It does not make sense that dispatches (VE01) and arrivals (MEIS) cannot be executed for several organizational units at the same time in parallel?
Thanks in advance,
Mats Hansson

yes I know this problem.
One should not maintain much thru this transaction.
for me it is not more than an emergency transaction, as it is not really more than table maintenance thru SM30
You should investigate what entries/changes the users have to make.
Limit these manual entries by having better data in the system, so that SAP can itself create the entries for this table.
Organize more, less users , maybe just one per company who shall maintain VEFU manually.
Train them to prepare their entries before they start using VEFU.
Explain that they should leave VEFU as soon as possible as the block other users.
assign maintenance windows to the users.

Show in a Iview all documents of an user of the whole portal

Hello everybody,
I want to show in an Iview all documents of an user of the whole portal, not only the documents under his folder /userhome/Personal Documents
Any ideas?
Thanks in advance
Guillermo.

... and of course I have to add that this can be done with very few programming (but with that - with much more possibilities) by using a redirect "proxy iView", which is described in detail (and is taking just this scenario as one use case among others) on the slides of my TechEd presentation "Implementing Dynamic iView Properties", at least available for TechEd visitors now.
On the other hand, searching for "proxy iView" on SDN will return different results where at least I have described the basic idea.
Hope it helps, too,
Detlev

"Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

Hi Everybody. I have a weird one for you.
I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
It looks more like a profile issue.
She's a very active archivist, so she only has 486MB of space used by her mailbox.
It's well under quota.
It's been really puzzling me.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi Timssims,
Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
I suggest asking Outlook Forum for help so that we can get more professional suggestions.
For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
However I also have some suggestions for your reference:
1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
2. Please also paste the detailed error message if "operation failed" is not the
complete information.
3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exporting to excel erases the contents of internal tables

Hi All,
I am creating a BSP application wherein i am exporting the data from my
BSP pages to the excel sheet using oninputprocessing event.
The issue is when i open the excel, it opens it in a separate url but after opening the
excel when i try to navigate to the other page, the contents of the other page gets erased.
and once i refresh the page from which i am opening the excel, the contents of this page also disappears.
so basically its clearing the contents of all my internal tables.
I tried creating different set of internal tables for excel use, but the issue still exists.
Could anybody please help me with this issue.
With Regards,
Mahima.

In my opinion, after you are opening the window with export to excel you are creating new session, then all of your application data is initialized and you have an application like it would be newly started. The reason is improper link or so...

How do I move Events from one user to the other?

I have two users on my PowerBook G4 and in preparation of moving all to a new MacBook Pro I want to move the pictures of one user to the other user. I've tried copying them and was successful but the Events did not copy, rather all 530 photos copied as one Event. How do I copy the photos and maintain the Events?

iPhoto Library Manager is recommended on here many times every day. I can't recall anyone mentioning a significnt issue with it.
Regards
TD

Outlook autocomplete cache stops working for multiple users at the same time

Hi there
Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
Anyone out there able to help?
Thanks!
/Anders

Hi ,
Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
that legacy dn value.
For the external recipients exchange user the smtp address to get it delivered.
For your issue :
Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
How to convert NDR to x500 address format :
http://msexchangeguru.com/2012/03/15/x500/
How to avoid getting such kind of NDR'S :
https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
In case if you don't want the users to use the autocomplete cache when composing the new emails :
In group policy we can use the office templates to disable the below mentioned option.
1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
1.Empty autocomplete cache.
Please reply me if anyhitng is unclear.
Thanks & Regards S.Nithyanandham

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

EXP: Export all tables for one user except the contents of one table

Similar Messages

Maybe you are looking for