Checking for calibration time

I have a requirement to perform a daily calibration of an instrument on a daily basis.  The time of calibration must be user configurable.  So, what I have done is created a menu item which allows the operator to control the user time.  Additionally, I have a file where I store the last calibration time.  So, in my routine, I perform the calibration if it has been more than 1 day since the last calibration or the current time is greater than the daily set calibration time.   For the latter condition, there is always a possibility that calibration could get performed before the 24 interval is up ie:  initially, the daily calibration time was 9pm and then the operator decided to change it to 8am the following morning, so calibration would get run after 11 hours.
However, if I implement the OR condition as follows :
Current Time > Calibration Set Time ||  Current Time is 1 day older than last calibration time, I run into the problem that the calibration will be executed every time the current time > calibration set time, whereas I only want the calibration to be run once if the time has been changed.  I am struggling with the logic of how to implement it.  I am looking to the experts or the forum to help me overcome the intellectual roadblock right now.
Solved!
Go to Solution.

You could store in the file the next "Expected Calibration" time.  This would be set whenever the user updates the test station.  This could also be set whenever a calibration is performed (whenever the calibration is performed, set it to 24 hours from now, or the next expected calibration time).  You would only need to check if the current time is greater than the Expected Calibration Time.

Similar Messages

  • How to check for Web Srvice Timeout in ABAP Proxy call

    I am calling a web service in my ABAP program using ABAP proxy. The code is as under:
    TRY.
          y_v_request-mt_request-yaskkey   =  y_l_matnr. 
          y_v_request-mt_request-maktx      =  y_l_maktx.
          y_v_request-mt_request-ymtart     =  y_l_mtart.
          CALL METHOD y_v_prxy->execute_synchronous
            EXPORTING
              output = y_v_request
            IMPORTING
              input  = y_v_response.
        CATCH cx_ai_system_fault INTO y_v_fault.
          y_v_message = y_v_fault->errortext.
      ENDTRY.
      y_l_ycod = y_v_response-mt_response-answer.
    1. Is there is any way to know that the called web  service has timed out ?
    2. Is it possible to check for the time spent in the  call if it is more then say 500 sec then it should be considered as timeout?
    Any help will be appreciated.
    Thanks in advance

    Hi Subbu,
    you can catch CX_AI_SYSTEM_FAULT.
      DATA:   lo_sys_exception  TYPE REF TO cx_ai_system_fault,
    l_error_text type string.
    CALL METHOD ...
    CATCH cx_ai_system_fault INTO lo_sys_exception.
    l_error_text = lo_sys_exception->errortext.
    You can configure XI timeout parameter (for shure in SMICM / Parameter and, if i remeber right, as profile parameter in XI administration).
    Regards,
    Udo
    Message was edited by: Udo Martens

  • I have installed itunes 10.7 several times.  All goes well.  After reboot, I go into itunes and check for updates and it says I need to download the update 10.7! (And so cant sync with my Iphone)

    I have installed itunes 10.7 several times, all goes well. After reeboot, I go to check for updates and it still wants to update to version 10.7! I cant sync to my iphone4 because I get an error message saying I need version 10.6.3 or later. Help

    Thank you for getting me started on the track by mentioning "Revo" Uninstaller.  The results of "Revo" spoke volumns on why a successful install of ITunes is so difficult to achieve.  It is the evil "BONJOUR".
    I then tripped upon the following site by Apple and the detailed directions (I read, printed, re-read and followed the instructions.  It was intense) brought a successful ITunes, Quick Time and the lovely Bonjour home.  Thank you for the start JD42.
    http://support.apple.com/kb/HT1923

  • How can I set iTunes to check for new podcasts at a specific time of day?

    Hi guys,
    Anybody know a work around for this? I thought it was just a matter of clicking the refresh button at the time I want iTunes to look for new podcasts, but it doesn't seem to be the case...
    I want iTunes to look for new podcasts at 2 am every day. So, at 2 am, I clicked the refresh button in the Podcasts section in iTunes. It would then say, in the settings, that iTunes last checked for podcasts at 2 am and will look again at 2 am the next day. Awesome, not. Every single time I try this, iTunes always resets itself and decides to look for podcasts at 2:49 pm. I can't work it out.
    So, if anyone has a solution, I would love to hear it! I'm on the latest version. 9.0.2. Thanks for reading.
    Regards,
    Daniel

    I'm looking for the solution to this issue too. Once or twice, a full system restart has seemed to solve the problem temporarily but it slips back to an afternoon refresh after a few days.
    Seems like it would be simple for Apple to allow us to specify a time of day for refreshes in the preferences section.

  • I cannot do a software update, I get as far as System Updates then when I choose it a message appears say  "Check for update is not available at this time"  but I have not had a system update for a good while now.  I am on System version 6.16.211.XT912.Ve

    I cannot do a software update, I get as far as System Updates then when I choose it a message appears say  "Check for update is not available at this time"  but I have not had a system update for a good while now.  I am on System version 6.16.211.XT912.Verizon,en,US

    Which phone model?

  • I cannot access any of my old purchases. Movies, mainly. It has nothing to do with authorized accounts, I've checked for available downloads a thousands times over. They simply do not exist any longer.

    Well, this has been going on for a long time and I've had my absolute fill of it tonight.
    I have purchased a large collection of movies from iTunes that for mainly the reason that I have a new computer, my old films no longer exist as downloaded iTunes videos. That being said, I know I should be able to download purchased films as long as they're still on the iTunes store. I cannot download any of them. Tonight I decided to buy a collection that should have allowed me to download all three films (which I had previously owned, but got sick of trying to find a solution to why I cannot redownload them). So tonight, I purchase this collection of three films, downloads the frst one. Theres absolutely no sign of the second or third film and when I select Check for available purchases it says all available purchases have been downloaded.
    If this was true, 25+ movies would be available to download, least to say the two missing from tonights purchase (which I have purchased in the past as well).
    My account is authorized, everything is alright with my account and I have tried multiple suggestions and am completely lost. Apple support is giving me the run-around.
    What do I do?

    Nevermind. I finally found a third party answer and will post it for anyone else with my problem.
    >Go to the iTunes store.
    >Halfway down the page, right hand side, says account
    >Under account it says purchaced, select that
    >Wa-la

  • How to stop Firefox from checking for add-on compatibility every time it opens?

    How to stop Firefox from checking for add-on compatibility every time it opens?

    That can be a problem with the compatibility.ini file in the Firefox profile folder.
    Try to rename (or delete) the compatibility.ini file in the Firefox profile folder to see if that helps.
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can also check for problems with preferences.
    Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on running javascript

    When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on executing javascript and raising errors.

    What are the error messages you are seeing?

  • The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.

    Once in a while i get the error
    Event ID 6463
    The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
    This also happens when i restart the timer service.
    I already cleared the SharePoint cache (xml's) but no success with that.
    Environment is
    SharePoint 2013 SP1 + CU Dec 2014

    This is a brand new SP13 with SP1 installation after binaries installation i also installed Dec 2014 CU and then created the SP farm.
    The Apppool/Timer account is member of WSS_ADMIN_WPG.
    Issue can be reproduced with restarting SharePoint Timer Service.
    Hereby the Process Monitor output. Hence i filtered it on NOT SUCCESS and Path contains the word UPGRADE
    11:37:57,4244851 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\UpgradeLogLevelOverride
    NAME NOT FOUND Length: 144
    11:37:57,6632057 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:57,6632889 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:57,7140763 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:57,7141089 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:57,7313089 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:57,7313403 OWSTIMER.EXE
    6272 RegOpenKey
    HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
    NAME NOT FOUND Desired Access: Read
    11:37:59,2026527 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:37:59,2109400 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3534303 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3537846 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3594290 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3597316 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3653094 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144
    11:38:05,3656118 OWSTIMER.EXE
    6272 RegQueryValue
    HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
    NAME NOT FOUND Length: 144

  • Check the coupon code section for limited time deal

    Latest offer: 'Save Over 50% Off Today's Woot' In the last day, 4 promos have been used. Community sourced deals are a great source of discounts and coupons. How do wingnuts gain the best Woot Coupon Code guidance? Take a look at our 5 Woot offers including 5 sales. A basic search of the Internet will provide you with a detailed listing of available Woot Coupon Code for sale. That has changed. The Sellout! The last time an offer was used was July 10, 2015.How to use a Woot coupon Woot features "tons of cool stuff, sold cheap." Sign up for the Deal of the Day to receive discounts of 50-90% on the best brands. Herein you shall learn in regard to the shortcuts of Woot Coupon Code. Page offers last chance deals for hardcore cheapskates.. Check the Woot!plus section for limited time deal events. One way I guard against that is by refusing to buy sharply discounted Woot Coupon Code. Get more info :- http://aulaworld.com/woot-coupon-code/

    Find a serial number
    For anything else contact support directly or work things out with your reseller.
    Mylenium

  • How can I turn off Keychain from asking for my password EVERY time I check for mail?

    how can I turn off Keychain from asking for my password EVERY time I check for mail?
    This is really driving me nuts.....
    Thanks

    Choose Apple menu > System Preferences, click Security & Privacy, and then click General. 
    Open the General pane of Security & Privacy preferences
    2.     Select “Require password...NEVER after sleep or screen saver begins.”  You can adjust the amount of delay before a password is required in the pop-up menu.
    From what I am aware, you cannot turn off the keychain.
    I hope this helps.
    This is also a link that might help http://macs.about.com/od/systempreferences/ss/Mac-Security-Using-The-Mac-Securit y-Preference-Pane_2.htm

  • Every time I open my imovie app on my computer it always closes.  can someone tell me why it does that?  i already checked for updates but there is none.

    Every time I open my imovie app on my computer it always closes.  can someone tell me why it does that?  i already checked for updates but there is none.

    I would suggest trashing your iMovie Preference file. Complete instrucitons are here.
    https://discussions.apple.com/docs/DOC-4061

  • Firefox checks for updates to add-ons every time it starts?

    Every time I click my shortcut to open Firefox, a window pops up. This window scans my installed add-ons and checks for updates. Then, Firefox opens. One of my add-ons, "Zotero Word Integration" tries to install itself every time. If I have an instance of Microsoft Word open, this installation fails, but ultimately, Firefox opens and runs fine. The add-on scan takes approx. 30 seconds, so if I accidentally close FF, it's a big hassle. This first started happening after I updated to FF 8. I downloaded and installed FF7 but the problem persisted. Now, I am back to FF8, but, alas, nothing has changed. None of my other add-ons are having problems except for the ones that aren't compatible with FF8 yet. FYI, I do have Roboform, but it is the current version, both to-go, and everywhere.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    Delete the files extensions.* (extensions.sqlite, extensions.ini, extensions.cache, extensions.rdf) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    New files will be created when required.
    See "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.
    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • TS3297 After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

    After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

    After updating to ios6 I am mostly unable to download apps, about 95% of the time I get a box saying "cannot connect to iTunes Store". Have checked for more updates and been around in circles on apple tech "support", any ideas anyone?

  • Checking for Purchases (Every Time)

    Every time I open iTunes 7.2 it asks me for my Apple ID and password so it can check for purchased items. It's super weird. I have no purchased items to download and the "Check automatically for purchased content" is unchecked in the prefs.
    I've tried entering my password and hitting "check"... tried hitting "cancel". Nothing works. Tried hitting up the email tech support and was sent articles on authorizing my computer. Thanks Apple.
    iTunes still asks for my password and ID every time I open the program. I can still use the program no prob, but it's annoying and leads me to think there's Something Very Wrong.
    Anybody got a fix? Thanks!

    I fixed it on my machine. I found a file called list.plist in a folder called Downloads in my iTunes Music folder. After I moved this file to the trash, the behavior stopped.
    I first verified that I had no other outstanding downloads before I deleted the file. I don't know what will happen if you do have outstanding downloads and delete this file. It would suck to lose music you paid for so proceed with caution.
    I think I know what caused it in my case. I tried to buy a drm free album the day they came out. The downloads kept timing out because iTunes was getting slammed. Eventually I was able to get the download to complete but after that I was getting the annoying check for downloads prompt every-time I launched iTunes. The list.plist file I found contains references to the music file names that were timing out.
    Macbook Pro   Mac OS X (10.4.9)  

Maybe you are looking for

  • How to override to_number function?!

    Hi, I already tried to find an answer by searching this forum but without success... My problem is, that I have a lot of mappings using the to_number() function to convert char into number. Now it turns out, that in some cases - due to the bad data q

  • Windows 8 wireless connection help

    I have just bought a new windows 8 system (HP 2000) and I am having problems connecting to my home wi-fi. This PC and all others that are using this network have a security of Shared and a WEP encryption. this new pc has no Shared option. No other op

  • Process to Discrete Inventory Transfer Facility in EBS 11.5.10

    I have a need to understand how the Process to Discrete Inventory Transfer Facility in EBS 11.5.10 works. Does it transfer only certain types of items? How is it determined which items are to be transfered? I understand that in 12.1.1 the OPM invento

  • I am getting Error Code 150:30 after replacing my hard drive on my Mac.

    I am assuming that I am missing something when I reinstalled my system using Time Machine.  Any ideas on how to fix this?

  • REMOTE_LOGIN_PASSWORDFILE parameter

    Hi pls let me know the diff. between REMOTE_LOGIN_PASSWORDFILE , when set to NONE,EXCLUSIVE mode. Are there any other modes of this parameter. - (Is it only NONE/EXCLUSIVE) Set the value of the REMOTE_LOGIN_PASSWORDFILE parameter to NONE. Set the val