Checking Passwords
Is there any way in PL/SQL to check whether the given string (user input) is the password for a particular username?
I need to write a new PL/SQL function with two parameters, say username, password. Here password will be given by user. I need to return TRUE if the password is same. Else FALSE.
Thanks in advance.
Hi,
I do not know if this is a round abt soultion.
Write a Java Program and Load the same in the database. Pass the Password as a Parameter to the Java Prg and try to connect. If connection Fails u'r password does not match.
Hope this helps. [ Call the java prog from Pl/SQL as a External Routine.
Regards,
Ganesh R
Similar Messages
-
My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
PKI-02002: Unable to open the wallet. Check password.
I am getting the following error: And I am unable to start IntegratedWeblogic Server.
oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
<Jun 29, 2011 2:02:45 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jun 29, 2011 2:02:45 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jun 29, 2011 2:02:45 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Process exited.
Please help soon.This has been discussed before.
You can try out
Re: 11g: Unable to intialize the credential store
or
Re: Problem is : unable to initialize credential store -
Unable to login SAP installation stopped at ddic check password step
Hi,
we are installing SAP PRD server on RHEL 5 from system copy export of dev (EHP4). now we are at ddic check password step .
when we try to logon at sap , very very long time it shown logon screen. but unable to logon through sap*.
we have done the following
#su dbuser
$sqlcli -U DEFAULT
sqlcli> delete from SAPPRD.usr02 where bname = 'SAP*' and mandt=000
where sapprd is my schema name.
we start sap it shows successfully started, but when we try to logon it immediatly return error.
Error: partner 'IP:3200' not reached
Wed May 25 18:54:21 2011
Release 720
Component NI (network interface), version 40
rc = -10, module nixxi.cpp, line 3286
Detail NiPConnect2: IP:3200
System Call connect
Error No 10061
'WSAECONNREFUSED: Connection refused
Please Guide
Best Regards
KhanThanks ,
when we startsap it says that,
[root@prdsap ~]# su - prdadm
prdsap:prdadm 1> startsap
Checking ADA db Database
Database is not available via R3trans
Running /usr/sap/PRD/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/prdadm/startdb.log
PRD database started
/usr/sap/PRD/SYS/exe/run/startdb completed successfully
Starting Startup Agent sapstartsrv
Instance Service on host prdsap started
My server SID is PRD, it home Dir contains
[root@prdsap prdadm]# ls -la .XUSER.62
-rw------- 1 prdadm sapsys 1724 May 25 07:51 .XUSER.62
prdsap:prdadm 2> xuser -h
Syntax: xuser [{options}] [action]
xuser 7.7.06 Build 010-123-204-327 (record format version: 3)
Usage: List, clear or setup user specific connection information
Description: This tool is used to predefine and manage default values
for user data and connection options. Every data set
is stored with an XUSER key. When connecting to the
database without specifying an XUSER key, the key DEFAULT
is used. Additionally specified command line options
override the XUSER data.
Options:
-h show long helptext
-V show version of XUSER program
-A ASCII8 interpret environment and batchfiles as pure ASCII8
-b file set user information via batch file
The batch file format is analogous to the way you enter
options and commands on the command line. Each line in
the batch file must contain an option list followed by
a command. The lines are processed in the order they
occur in the batch file. You can mix 'set' and 'clear'
commands in one batch file. You can't use the 'list'
command or the option -b. If an error occurs, the batch
execution stops at the respective line of the batch file.
string (no restriction to the length), default '' = current user
-U user_key user key
string (max. 18 characters), default 'DEFAULT'
-u user_name,password user name/password combination
2 strings (max. 18 characters), default '',''
-d database_name database name to connect to
string (max. 18 character), default ''
-n database_server database server name
string (max. 64 characters), default '' = local server
-e encryption Encryption type valid encryption types
are 'SSL'
-S SQL_mode SQL mode
string (max. 8 characters), default ''
valid modes are 'SAPDB', 'INTERNAL', 'ANSI',
'DB2', 'ORACLE' and 'SAPR3'
-t timeout connection timeout in seconds
number (default -1 = default timeout value set in the database
0 = no timeout)
-I isolation_level isolation level
number (default -1, valid values are -1,0,1,2,3,9,10,15,20,30)
The following actions are defined (must always be the LAST argument):
list list user connection information (default all user keys)
ignores all options, except -U
clear clear user connection information (default all user keys)
ignores all options, except -U
set (default) set user information
prdsap:prdadm 4> xuser list
XUSER Entry 1
Key :DEFAULT
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :prd
Nodename :prdsap
Sqlmode :<unspecified>
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :PRD
Nodename :prdsap
Sqlmode :SAPR3
Cachelimit :-1
Timeout :0
Isolation :0
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :PRD
Nodename :prdsap
Sqlmode :SAPR3
Cachelimit :-1
Timeout :0
Isolation :0
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :PRD
Nodename :prdsap
Sqlmode :SAPR3
Cachelimit :-1
Timeout :0
Isolation :0
Charset :<unspecified> -
CAR 3.5.4 Authentication users without checking password
I'm using Cisco Access Registrar 3.5.4. Can I authenticate users with option:
AllowNullPassword = TRUE
without checking password in access-request?At authentication time, if the following three conditions are met, user authentication is bypassed.
1. Allow-NULL-Password environment variable is set to TRUE.
2. The User-Password or CHAP-Password must be NULL in the incoming request. (If it is not NULL,
normal password checking will occur.)
3. A user record exists for this user.
More details about this is given in the link.
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cnsar/3_0/users/wireless.pdf -
Thunderbird stuck at 'checking password' when adding gmail account
Hi
I successfully added my gmail account to thunderbird on my windows pc but I'm not able to do so on arch.
On the windows pc I used the default setting thunderbird proposed, I tried the same on arch but without success...
The setup is stuck on 'checking password...'
Any advice?I cannot believe the swiftness of your the help on this forum, within seconds you guys fixed the problem, and the account was added with no further issues. The people on this forum rock!!!!!
I am now beginning to suspect it indeed had to do with that first lot of wrong passwords. -
What would cause my system to check password forever when logging back onto my machine?
I have to shut down via the power button to reboot. This happens often but not always.I've disabled all the firewalls and anti-virus stuff. So that wasn't it. That was the first thing I tried when I had the problem
I have no problem setting up for POP. It's IMAP that I can't get. Why does IMAP setup have to go through that wizard. Why can't I just configure it with the known settings and use it? Why is that apparently troublesome process necessary?
I guess I'm stuck with using the POP server. IMAP would have been preferable. Maybe I'll try again later. Maybe someone will come up with a solution that works., -
Mail suddenly stopped getting my IMAP emails from my provider yesterday. I checked the passwords and all ok. Then deleted the account and re-entered it but still nothing. Strangely everything is fine on my iPhone 4! Maybe I need to delete and download a new Mail app? Any suggestions welcome!
For future mail problems.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Ability to check password history without trying to set password?
Is there a way to check a given password against a user's current password & password history without trying to set their password?
The user's policy has the "passwordInHistory" and some other password policies enabled.
If possible, could this be done via a non root (cn=directory manager) account granted the correct permissions?
Edited by: raymondrewalker on Feb 2, 2010 10:02 AMThe attribute with past password is pwdHistory. The current password is in userPassword. You can do a ldapsearch to fetch them.
And you can use the pwdhash command to check if the hashed value match a specific password. The command should look like this:
/opt/SUNWdsee/ds6/bin/pwdhash -D ... -c {SSHA}encryptedpassword== testpassword
With a little script it's possible to do this in an automatic way. I don't know if anyone can run the pwdhash command and how to give permission to the userPassword and pwdHistory attributes.
Vincent -
Check password policy settings
Hi All,
As an SAP super user, how is it possible to check the password settings or password complexity requirements like number of characters, numbers, etc in the password?
Please let me know how to navigate and check/edit them.
Thank you,
GeejHi,
Please refer SAP note:
978292
- Working with password policy
Thanks & Regards,
Nagarajan -
How can I check password???
Hallo,
I have been working recently with netweaver.
I should write a method that checks the username and password.
Username and password are to be taken over by a logon.jsp.
It would be very nice if someone could help me.Hello.
here is a good tutorial on how to customize the logon page:
http://jsbi.blogspot.com/2006/09/how-to-customize-login-screen-in-sap.html
Regards.
Andi -
How can I check password in the portal???
Hi,
I have createt a new login page with jsp and now i want to check the password of the user.
Can someone help me???
thanks
Edited by: Cilvaring on Jun 10, 2011 1:58 PMHello.
here is a good tutorial on how to customize the logon page:
http://jsbi.blogspot.com/2006/09/how-to-customize-login-screen-in-sap.html
Regards.
Andi -
How to check: password expired,password forced to change,user disable
I am writing application to detect the following. I just need to check whether the condition is true. What are the things that I need to check for:
- when a user password is going to expired in x days?
- when a user is forced to changed a his password?
- when a user is disabled? For this, do I check the attribute "nsaccountlock=true"?
ChooichinI am writing application to detect the following. I
just need to check whether the condition is true.
What are the things that I need to check for:
- when a user password is going to expired in x
days?
you can use he passwordControls during a BIND operation and investigate if the password expired/expiring in so many secs
- when a user is forced to changed a his password?
- when a user is disabled? For this, do I check the
attribute "nsaccountlock=true"?Yes, if some interface is actually using this to disable the user in the first place.
>
Chooichin -
Ciscoworks - Checking password compliance
Hi,
We use ciscoworks to do a mass change of our passwords periodically.
I want to run a compliance check to unsure then enable password has been changed.
So i create a template to check for the existance of something like
+ enable secret p4ss0wrd
However when i run the job it tells me that there are no compliant devices, even when i know that most of them are, and i can logon using the enable password.
Is it because the password on the device is encrypted and ciscoworks is not able to see what the real password is?
How can i run a complicance check for passwords then ?
thanksActually, the string will always change as long as you generate it with the "enable secret" command. You can even generate it multiple times on the device and it will be unique, ie:
CR-NMS-6506E(config)#enable secret 0 test
CR-NMS-6506E(config)#do sh run | inc enable
enable secret 5 $1$FDbm$el.5qOps49M/oP9F/X3y8/
CR-NMS-6506E(config)#no enable secret 0 test
CR-NMS-6506E(config)#enable secret 0 test
CR-NMS-6506E(config)#do sh run | inc enable
enable secret 5 $1$F/mV$3vhEBYTl7dJ9CqiLhUaOq/
CR-NMS-6506E(config)#no enable secret 0 test
CR-NMS-6506E(config)#enable secret 0 test
CR-NMS-6506E(config)#do sh run | inc enable
enable secret 5 $1$8hd6$sBPU9kkIJgu5RHYUtLJml1
CR-NMS-6506E(config)#
However, if you copy paste any of these to the config directly (probably why they are the same on yours Martin), they will all be the same enable secret "test". The first three characters indicate that this is an MD5 hash.
As Martin says, the best way to test this would be running a dummy NetConfig job which requires enable login. Veryifing the correct password has been applied is not possible using baseline template (unless you have the custom to copy paste the hash directly), as that would require RME to be able to reverse the MD5 hash. This is impossible, you can only "break" an MD5 using a dictionary attack.
In Baseline, you could do something like this "+ enable secret 5 [xxx]" where xxx can be substituted by anything. But this would only show you have a secret MD5 configured. -
Is the Cloud working? I cannot get emails. As such cannot check password
Is the Cloud working? I cannot get emails. As such cannot check password
All lights are green
http://www.apple.com/support/systemstatus/
Maybe you are looking for
-
Installed iTunes 11.0.4 on 10.8.4 and now my iPhone won't sync at all-
I updated iTunes (11.0.4) with the update that came out to fix sync issues between wireless and wired syncing and now when i try to sync it wont sync at all with my iPhone 5. Side note: it worked fine with 11.0.3...
-
How to delete .pdf file after viewing in SAP
Hi, I've a program to show a pdf file within a SAP window using the open document method form the class cl_gui_pdfviewer. Now I want to delete the pdf file once I choose the back button or exit the program. How can I do that. In the PAI for the scree
-
Issue in Program for mass creation of customer plans.
Hello all, I am working on a program which helps mass creation of customer plans. My code works well, when no planning account is assigned, but when I pass the planning account value into the Function module, it gives me an error saying ' Account ca
-
Hide page zero regions in the builder
Hi We are using APEX version 4.0.2. are have many shared regions (SQL Reports) placed on page zero. There are conditions on these (page must be in...), and that works fine when running the application. The problem is in the builder, where these page
-
Dear Gurus I attempted to find those items from MB5S List of GR Balances those items which are matching on total and mis-matched on SERV Entry Sheet / GR QTY and Invoice QTY. They did not appear on the MR11 listing to allow clearing. Please s