Checking the unsaved data in a page programatically
Hi,
I using JDev 11.1.1.5.0 and I created three pages in my application and activated the "UncommittedDataWarning" Property of af:Document of all the pages and trying to navigate to other pages. I am able to get the dialog box and then navigate to other pages. (Each page does contain four fragments as router based conditioned regions)
Here I have changed the data in the first page and tried to navigate to second page without saving data, then I get the uncommitted data dialog box and I clicked 'Ok' button and navigated to second page successfully.
Now, when I navigate from second page to third page without changing any data on the second page, the uncommitted data check dialog box appears here too. I have tried with checking on the 'Critical' property of the taskflows. But still the problem exists.
Is there any alternative solution to get the uncommitted data checked on the page programmatically.
Any advice on this would be helping.
Thanks.
Hi Mohammad,
Thank you for your reply. I tried to use the code that you provided in the link earlier. But I was not clear where to use this code. Hence I proceeded with the "UncommittedDataWarning" property on Page.
If you have any idea of how and where to use this code, can you please guide me?
It will be very helpful to me.....thanks in advance.
Similar Messages
-
Error while checking the rate data through installation
Hi everyone,
I am facing an error message while checking the rate data for an installation:
"Internal error: Error when reading internal table IEGER in ISU_O_DEVICERATE_OPEN".
Please guide.
Thanks and RegardsHi,
The error comes from FM ISU_O_DEVICERATE_OPEN include LEG70F40 line number 2555.
It is giving error on following code of line in FM.
find the serialno.
loop at ieger into eger_wa
where equnr = reg_wa-equnr
and ab <= reg_wa-ab
and bis >= reg_wa-ab.
exit.
endloop.
if sy-subrc <> 0.
perform close_object changing obj.
mac_msg_put 'E890(E9)' 'IEGER' 'ISU_O_DEVICERATE_OPEN'
space space input_error.
if 1 = 2. message e890(e9) with ' ' ' ' ' '. endif.
endif.
I think that you are not checking the active installation. Check whether that installation has proper ebtry in table EASTS.
Try changing
BIS BISZEITSCH DATS 8 0 Date at Which a Time Slice Expires
AB ABZEITSCH DATS 8 0 Date from which time slice is valid
data for the installation.
If this dosent work then debug the program by putting break point on the mentioned line and check.
Regards,
Pranaya -
How can I check the expiration date of a Certificate Keychain from terminal?
Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
Any recommendations would be appreciated.
Thank you!Anyone?
-
How to check the master data records in using SE16 transaction?
Hi,
Can you please help me to check the master data records using SE16 transaction?
Loaded master data for Characteristic and want to check the records in the master data tables.
Thank you for your help!
LakshmiHi!
Welcome to SDN.
you have to check the master data tables.
soo in Se16 you have to select the appropriate master data table and view the data.
following thread explains about masterdata tables
MasterData table?
regards
mohan
Message was edited by:
Mohan Krishna -
can anyone check the purchase date of my macbook pro by serial number c02m3av4fd56? thx!!
Use this link. https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
How to check the expired date of a public key stored in my keyStore
Hello,
I would like to know if there is any possibility to check the expiration date of a public key which is present in my keystore.
I did read the help of keytool but did not found any explanation about that.
Thanks in advance for your answers.
Alain.
Message was edited by:
PhilipinaPublic key doesn't have an expiration date. Certificate has. Run keytool -list -v and you can read something looks like:
Valid from: ... until: ... -
Hi,
Is there a cold fusion function that checks the complete date (mm/dd/yyyy) against another compelete date (mm/dd/yyyy)?
I have used the DateCompare but it only checks the month, day or year depending on the precision being used.
Thanks,
MikeI think you might need to read the docs a bit more closely. From the docs for dateCompare():
datePart
Optional. String. Precision of the comparison.
s Precise to the second (default)
n Precise to the minute
h Precise to the hour
d Precise to the day
m Precise to the month
yyyy Precise to the year
Indeed, even by default its behaviour is not what you suggest it is.
Adam -
How can i check the planned data vs actual data
How can i check the planned data vs actual data with the infocubes?
Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay. -
After completing MSS PCR, how to check the updated data in R3
Hi,
After completing and submitting the MSS PCR, How do I check the updated data in R3?
Thanks
RevaI got the answer.
-
Hi,
If my report doesn't work and I have to check the Master data is uploaded properly or no, How do I check that?
Can you help with the steps?
Thank you.Hi Radha,
The shortest way to check the Master data of any info object is:
Goto SE16 or SE11:
In the table text box give: /BI0 or C/MXXXXXXXXX
'0' for SAP generated infoobject
'C' for Customer generated infoobject
View of MstrDtaTbls: 'M'
Master data tab: 'P'
SID table attr.: 'X'
Text Table: 'T'
XXXXXXX - infoobject.
Hopes this helps.
Regards,
Ravi Kanth -
Checking the master data automatically before the payroll run...
Hi Friends,
Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
With regards,
Diptenduhave
a look at this report
but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
se 38 HTWLINFO read the documentation of the is report mmight be useful -
Anyone know how to fix this? It's reading the remote because the light is flashing when I click on many, but it's staying on the "setting date and time" page. Any workaround here would be great. Thanks peeps!
This is indication of a network issue... .ensure that the DNS settings are set to Automatic.
If the ATV is not responding to the remote, start by unplugging the device then plugging it back in. If it still fails to respond, restore via iTunes on the computer. -
How to check the DPI for images on pages
hi,
I want to check the DPI for images programatically, is there any function available in acrobat SDK,
If not what other option we have to check the DPI for images programatically.
Thank you,You don't mention which parts of the SDK, but you can use the Preflight feature of Acrobat via either JavaScript or C/C++ (plugin) to generate a report of images in a document and their information (including dpi).
You can also write a plugin to iterate over each image individually and get its properties. -
How to call a macro(check for unsaved data) before calling refresh button of EPM TAB
Hi,
I want to show a popup message for any unsaved data before USER hit the refresh button on EPM tab.
I write the macro like as below in module
Function TestForUnsavedChanges()
If ActiveWorkbook.Saved = False Then
If MsgBox("There is unsaved data, save the data otherwise u will loose the data. Do You Want to Save the Data ?", vbYesNo, "Warning") = vbYes Then
bSave = True
Else
bSave = False
Application.Undo
End If
End If
End Function
so how to execute this macro before Refresh ?
Thanking in Advance !!Hi Nilesh,
Try to add this macro under Function BEFORE_REFRESH.
Hope this helps.
Regards,
Astha -
Check the end date of activation of Adobe CC products
hello,
After installing Adobe CC on our Graphics stations, we can not authorize them to connect to the internet for security reasons ..
To know when to pass on machines (every 180 days with the team agreement), there is a file or key Register with this information.
The purpose is to pass on machines with a wireless key to reactivate the license, but for that I must know the end date of activation.
If you have an answer, I thank you in advance
cordiallyHi Emi
As Ravi rightly said, there is no such field..
Couple of possible ways
1. Check AW01N - Comparison tab - This can tell you in which Year the depreciation would end
2. Develop a Custom Query (SQ01) or Custom report based on Capitalizaion Date + Useful Life = End Date
Br, Ajay M
Maybe you are looking for
-
Additional parameters in the adapter configuration - note 801926
Hi, from help.sap.com I remember that note 801926 is proposed on the file adapter config page for at least 2-3 months by now. but when I try to download it I see: "Note 801926 is not released." can anyone download this note and paste it here? (maybe
-
[bsp:findAndReplace] tableView & Iterator
Hi, I am currently struggling with the use <bsp:findAndReplace> in Iterator in order to add a JavaScript event for a personalized tooltip display. I am using the Bee Table: findreplace_bee = cl_bsp_find_and_replace=>factory( find = '<a'
-
Any news on when Apple Aperture support for raw files from teh Fuji x pro 1 will be out?
-
Where can I download the InDesign tutorial files ?
I have watched some of the tutorials from https://helpx.adobe.com/creative-cloud/learn/tutorials/indesign.html. The first tutorial " How to make a brochure with InDesign (17 min)" did contain downloadable files with which the tutorial was very helpfu
-
Hi all, We want to access to web services in WLS6.1 using SOAP https (dynamic SSL) transport (not http). Is it possible? If possible, please describe this process. Thanks, Alex Jurcenko