Cheque number assignment

Hi,
Can we assign the same cheque number to multiple payment documents? If so, what is the T-code and the steps.
Thanks
Sridevi

Hello Sridevi:
I have the professional curiosity of knowing in which cases you need to assign the same u201Ccheque numberu201D to a different payment documents. Didnu2019t each one issue its u201Cpayment orderu201D (the official document or file register sent to a customer or a bank) when you ran the F110?
Thanks in advance.
So long!
Paco MS

Similar Messages

  • Change the SAP cheque number assignement sequence

    Hello All,
    I am having a requirement as the higest values of cheques need to be printed first with sequence of the cheques numbers while generating the cheques from F110 transaction
    Is this possible to change the cheques number sequence of SAP ??? The highest amount need to be printed first with sequence of cheques number.
    Thanks,
    Feroz.

    Hello PALLAVI.K ,
    It is used to rename the cheque number, I want while creating the new cheques the cheque number assignement need to be assigned for high values cheques the starting number and then the low cheque values that is sorting the cheque number based on amount.
    Thanks,
    Feroz.

  • Cheque number assign twice to same Document number

    Hi
    I have this situation whereby two cheque numbers are being assigned to one document number. Neither of the cheque is void as i check in FCHN. Unsure why is this happening.
    During printout, the system skips one physical cheq and printed on the continueing cheque. (Means cheq A is clean without printout and chq B is printed with the amount).
    My user uses F-58 to print out since is only one transaction.
    I am puzzled. Need advice.
    Many thanks
    eddielim

    HI Eddielim,
    I think its not possible to assign 2 checks for a single payment document.  Reasonably one check shall be voided and another check should be vaild one.
    As you are saying the user is using F-58 as he making a single payment in the initial screen under "output Control"  tell him to check the "Do Not Void any Checks" .  I feel one check is getting voided and one is normal. 
    And also i would you to check the variant give in F110 tab " printout/data medium"  under output control - number of sample printouts, Do Not Void any Checks.
    I hope this solves your issue.
    Regards,
    Kiran Yelamarthy

  • Any SAP program insert cheque number to assignment field of outgoing bank.

    Hi Expert,
    During outgoing payment, SAP has the following double entry:
    Dr Vendor
    Cr Outgoing bank
    > After the above FI document created (clearing document), cheque is printed in order to issue to vendor for payment.  At the time of cheque printing, SAP generate the cheque number.
    In order to have smooth bank reconciliation process, the outgoing bank field is enter (edit the FI clearing document) with cheque number.
    Question: Does sap have any program that can be used to insert assignment field with cheque number (after the cheque printed)?
    Other than this, any other possible option for bank reconciliation problem mention above?
    Thanks,
    sbmel

    Hi ,
    In the outgoing bank GL account use the functionaliyt of Sort key - put there assignment number as sort key .
    In sort key IMG settings make settings for check no. so that when ever  a document is posted check no gets populated in assignment field .
    Secondly , use the T code FCHU to update the assignment field for the same .
    Regards ,
    Dewang T

  • Assign Cheque Number in Batch Mode (F110) without creating a spool

    I don't understand why I can use FCH5 to assign cheque number to individual payment but I need to use the Printout/ DME when I want to assign cheque numbers in a batch?
    We would like to assign Cheque Number to Payments in Batch Mode (F110 or other transactions) but we don't want to create any spool. Does anyone how to do it? .
    Thank you very much for your help

    I would presume it has something to do with Compliance and Control.
    F110 is an automated process.
    By allowing cheques to be manually assigned to payments without then printing them, it could lead to fraud and wrong doing.
    By making sure the cheque number in the system is the number than is actaul physically printed on the cheque there is an extra control.
    Also manually assigning the cheques numbers relies on people entering the correct info.
    Hope this helps.

  • Cheque Number requied in assignment field of f-58 automatically

    Dear Experts
    How can we assign cheque number in assignment field of f-58. Client requires whatever the last cheque number defined in the check lot at the time of new entry system will take next cheque no. in assignment field of f-58 t.Code.
    Is there any BTE or any Coding or any std. settings.
    Awaiting for your reply.
    Regards
    Ronak Agarwal

    Hi,
    You can run T.Code FCHU to create reference for check from payment document and select the assignment field from "target field selection for check number" tab, and execute the transaction, then the relevant cheque number will be populated in assignment field of the payment document against bank account number.
    Thanks
    Javed

  • Assign cheque number range

    Dear FI Experts,
    I am SD Consultant, my client used Saraswat Bank, he has newly issue 5 Digit cheque number book instead of 4 digit, presently system not allow to me enter 5 digit cheque number. Please help
    Regards
    BK GAIKWAD

    Thanks to replay,
    As you suggested we have already enter the cheque number in from to format , not lot number & that time we have occurred the below message
    Check numbers cannot have different lengths
    Message no. FIBL517
    Diagnosis
    The lengths of check numbers in a particular lot must be equal.
    Procedure
    Check the lengths of the check numbers. It is occasionally necessary to enter the check numbers with leading zeros, (for example 09000 to 11000 if you use five-digit check numbers).
    BK GAIKWAD

  • Cheque number missing *( payment wizard)

    Hi ,
               Before posting this question i let u know that im new to this B1.
    N my question is Using payment wizard im doing the out going payments and my payment is executing without any cheque numbers. I given the cheque number in the 'next cheque numb column'  in the house bank accnt, but its not taking and its not display the cheque number and the payment is getting executed.
    so, how can i get the cheque number too after the payment is succesfully executed.
    Thank you,
    Gokul.

    Hi,
    You can refer to Note No. : [903135|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=903135] your issue.
    Relevant portion from the Note for your reference :
    All the check numbers will automatically be entered as '0', i.e. the number is not assigned based on the "Next Check Number" field in the House Bank accounts definitions. The check will be saved with the number  '0' as long as it is not printed. The check will become valid just after printing.
    Regards,
    Jitin
    SAP Business One Forum Team

  • FI-AP - (Automatic Payment Program -  Vendors) -  Cheque Re-Assignment

    Hi Experts,
    Can some help me on a real-time issue on FI-AP Accounts Payables - Vendors - Automatic Payment Program - Cheque Re-Assignment Problem - which I am facing.
    I have assigned a wrong cheque No. to a payment document through automatic payment program. Actually, this Cheque No. should be assigned to some other payment document.
    How, can I release / set free this cheque no. and re-assign it to some other payment document.
    I will awards points with an open heart.
    Thanks & Regards
    Rajeev Sharma

    HI,
    As  u r use the automatic payment program - and when u use the automatic payment program the check number are assign in automaticly.
    So this are assign when u do the check printing. So once u think the wrong number  are printed , u have to void the check number and write manual check and assign to the line item.
    FCHE - Voided Checks
    FCH5 - Manual Checks : Write manual check
    hope this is clear Assign some points.
    With regards
    Krishna Singareddy

  • Payment Document to Cheque Number report

    hi gurus,
      I've created some cheque to payment document using FCH1 using BDC. Is there a report that can display which payment document is assigned to which cheque number?
    Thanks in advance.

    Hi Yu JUNYI ,
    For that you go through FBL1N  vendor line item display there you change screen layout and select check number from field
    Ofter that u will get check no documentwise
    May be this information is useful to you
    Regards
    Surya

  • Cheque number issue

    Dear All,
    I have query regarding cheque cancel and update same cheque number with different pmt document number. Because my user is by mistake theywere updated with different payment document numbrs. My user is posting the transactions thru f-53 here we have pmt docs those are 1 and 2 and cheqe numbers 100001 and 100002. the user by mistake he is updated pmt documen 2 with 100001 cheque(this is document 1 related) and pmt document 1  with 100002(this is document 2 related) thru FCH5. Is there any possbility to cancel these details and update once again with appropriate cheques?.
    Kindly give me your valuable inputs.
    Regards,
    Nauma.

    Hello,
    I really do not understand the need for voiding the check.
    For example payment document 1 - Assigned check number 2
    Payment document 2 - Assigned check number 1
    As far as vendor is concerned, it is irrelevant for him / her, whether you issue check number 1 or 2. Vendors need their payment.
    Now the checks are encashed.
    If the checks are encashed and you have uploaded the bank statement, you cannot void the checks.
    Regards,
    Ravi

  • Manual cheque wrongly assigned to payment doc.

    Hi,
    User wrongly assigned cheque number 111 to payment doc#15-1 via F-53,  it should be assigned to doc#15-211.
    Manual cheque 111 was already issued to vendor.   How can i correct the assignment of cheque from payment doc# 15-1 to 15-211?  Seems no way to edit it. 
    Please advise.
    Eve

    hi,
    other wise 1 solution is their as per i know you have to cancel that cheque and document in fch8 give that voild reason and then you can go for new cheque ie., document will be reversed along with cheque and you can proceed with new cheque in manual ...
    i hope this will solve your issue.
    satishkumar.m

  • How to populate cheque number in IDOC for ERP version ECC 6.0

    Hi
    I am using ERP version ECC 6.0. I have created a sequencial cheque lot in FCHI and assign payment method to it. But when i generate a payment run, Idoc is not getting generated. In proposal run log "IDoc type could not be determined for the IDoc" this error occurs.
    Could you suggest why this error is coming. Any other configuration should be done in ERP for that payment method.

    Hi Rajesh,
    I am using PEXR2002 format for Idoc. Problem is i want Cheque number to populate in the Idoc for assigned payment method. For that i have assigned payment method for the cheque lot using t-code FCHI. After this i created proposal and run the payment. Status shows 1 generated, 1 completed. But the Idoc doesn't get created.Whats the problem. Can someone help me in this issue.
    Thanks,
    Shilpa
    Edited by: Shilpa Korad on Jan 20, 2010 9:29 AM
    Edited by: Shilpa Korad on Jan 20, 2010 9:48 AM

  • Cheque Number Confirmation

    Dear All,
           I want to change cheque number which I assigned at the time of outgoing payment-Payment means -cheque, for this I am trying to use cheque number confirmation function
    But when I am selecting all the details Banks,Account No., Branch and Posting period range where I created outgoing payment, System giving same error  No matching records found  'Cheques for Payment' (OCHO) (ODBC -2028)  [Message 131-183]
    Thanks,
    Siddique Shaikh

    Dear All,
             I understand the issue, Once we print cheque then only we can open cheque number confirmation function manually, we find the cheque which we printed once or more and we can change here cheque number, Once we Confirm Print Status then we can not change cheque number.
             my issue of error also solved here.
    Thanks,
    Siddique Shaikh

  • Cheque management - Reuse printed cheque number

    Hi Experts,
    Client has posted the payment document through F-58, the cheque has gone to the vendor, Now client wants to cancel that cheque & payment document & reuse the cheque no. & assigned the same cheque no. to the new payment document as there was some entry mistake by user. Also, they don't want to make the Journal entry for that mistake.  How to deal with the scenerio?
    I have gone through many threads but didn't got any solution.
    Thanks in advance.
    Regards,
    Nilesh

    Hi Nilesh,
    Please refer this thread:
    Outgoing payments. Reissuing cheques with original cheque number.
    Regards,
    Umamageshwaran.S

Maybe you are looking for