ChooseFromLists doesn't work with service calls (FormId 60110)

Hi,
I use this code for every marketing document and for the activities. In all Forms it works but not in the service calls. What is going wrong?
best regards
Horst
If ev.FormType = 60110 And ev.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
                     If ev.ItemUID = "14" Then
                If ev.InnerEvent And ev.BeforeAction = True Then
                    BubbleEvent = False
                    oForm = SBO_Application.Forms.Item(FormUID)
                    oCFL = oForm.ChooseFromLists.Item("2")
                    oCFL.SetConditions(Nothing)
                    oCons = New SAPbouiCOM.Conditions
                    oCons = oCFL.GetConditions()
                    If 0 = oCons.Count Then
                        oCon = oCons.Add()
                        oCon.Alias = "SlpCode"
                        oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                        oCon.CondVal = oSales
                        oCFL.SetConditions(oCons)
                    End If
                    BubbleEvent = True
                End If
            End If
        End If

Hello,
Service call is a special type of form (Different from marketing documents) That's the reason why it is not working.
It will not work
To do:
1. Create an editbox , connect to the OSCL.cUSTOMER Fields, and define your CFL over it.
2. Hide the original item "14"
Regards,
J

Similar Messages

Vibration Doesn't work with incoming Calls

On my iphone4 when I turn my Vibration ON it doesn't repond to normal calls, but it respond to rest. tried everything else except Restore. I dont want to restore coz I need all my messages, and other data. any ideas?????

Thank you so very much.
. Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation.
Mahalo,
Donna Jo

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

Hello I found my answer on Settings>>Restritions! :)
Thanks to me:)

Why EL doesn't work with custom tags ?!

I don't know why expression lang. doesn't work with me.
here's an example, and please tell me why :
--- the jsp page with EL ==> doesn't work :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="${product}" addToShoppingCartUri="<%= response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
when using expressions instead, the page works .
the new page is :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="<%= product %>"
addToShoppingCartUri="<%=
response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
The error was :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper
.java:512)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.runtime.JspRuntimeLibrary.getValueFromPropertyEditorManager(Js
pRuntimeLibrary.java:885)
org.apache.jsp.ShowProductCatalog_jsp._jspService(ShowProductCatalog_jsp.java:77
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.

Regarding setup, see this post reply #6
http://forum.java.sun.com/thread.jspa?threadID=629437&tstart=0
Other potential things to check: make sure you are getting the right value passed in
productCatalog="${applicationScope.product}"
${product} by preference would take a pageContext, request or session attribute before the application level one (it uses pageContext.findAttribute).
What do you get if you just print out ${product} on the screen?
It should call a toString() on it for rendering purposes.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

Apple tv doesn't work with my receiver

I updated my apple tv 3 and now it doesn't work with my Denon AVR-591 receiver. When I called Denon they said unfortunately the firmware on my receiver doesn't update and therefore may not work with certain devices. Is this possible?

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

ADS does not work.(Service call exception)

Hi All,
According to SAP note 937697 "Usage of SAP NetWeaver BI Diagnostics & Support Desk Tools", when running the tool, it gives following error:
ADS does not work.(Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://sapbwd.ni.ad.newsint:50000/AdobeDocumentServices/Config?style=document")
I have been looking into system to find out how to solve the issue, but could not, is there anyone who can help me with exact instructions what I do need to do.
Thanks in advance
sahmad

Dear Sahmad,
I would suggest you to check notes 1004321 and 944221. The first one says that mostly of this kind of issues (and I have already seen several ones) is caused for bad passwords for user ADSUSER or this account expired. The second note is a troubleshoot note you can also do.
You can also follow this procedure to check that:
Please open the Visual Administrator and browse to Server -> Services -> Security Provider -> Policy Configurations
In the Components tab you will see the service.destinations policy. Click on this and then click on the AccessDestinations security Role. Modify this and add the J2EE_ADMIN/Administrator user to this role and save.
Maybe the password is not set correctly as well. I think it worths to be set it again. First you have to identify where your ADSUSER maintained.
Go to http(s)://<SERVER>:<PORT>/useradmin search for ADSUSER If Datasource:
- LDAP -> check psw of ADSUSER in LDAP and enter it in SM59
- UME data -> check psw of ADSUSER in Visual Admin and enter it in SM59
- ABAP -> check psw of ADSUSER the ABAP system in the following client:
Visual Admin->UME Provider->Properties->ume.r3.connection.master.client
If you want, also, you can change the ADS by the SAP Export Library, as per SAP Note 1112132. It is very simple to activate and will bypass ADS, doing every function ADS does.
I hope it helps.
Kind Regards,
Marcio

WP Greek Century in Mac doesn't work with Dreamweaver

I am a many year PC user and have finally made the leap too Mac and its another learning curve .. That said, in Dreamweaver and in Mac, WP Greek Century does not work! I have reloaded the font and all I see is the alpha #.   If I load it into any browser, it still will not read greek. My old PC didn't have a problem with this. Some of the download sites say that this font, WP Greek Century, works with both PC and Mac. The one odd spin to all this is that this greek font works in Fireworks ... Is there anything I can do to make it work in Dreamweaver? Please advise and thanks. Mark
ps. I called Apple support and they could not help.

Thanks for your reply and I was afraid that this might the answer. Looks
like I'm going to have to go back and fix a bunch of documents. Appreciate
your help in this matter. Mark
From:   SnakEyez02 <[email protected]>
To:     Marcusb B <[email protected]>
Date:   02/13/2012 09:20 PM
Subject:        WP Greek Century in Mac doesn't work with
Dreamweaver
Re: WP Greek Century in Mac doesn't work with Dreamweaver
created by SnakEyez02 in Dreamweaver - View the full discussion
Fonts don't work on the web like they do in print. Any font you use on a
website will require that the end user have that same font installed on
their system.
I did try to load that font from a free source (assuming this is how you
got it). It is a PC TrueType and doesn't appear to work at all on the
Mac. Now if you are looking for just a few characters you can code this
into the HTML:
http://tlt.its.psu.edu/suggestions/international/bylanguage/greekchart
.html . As far as other fonts, this greek font seems to work on Mac:
http://www.dafont.com/ancient-geek.font . But again, it's not a web-font
so you won't be legally allowed to use it on web pages, and it will only
work if the end user has that font installed on their system, unlike the
HTML entities previously linked.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4205108#4205108]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4205108#4205108]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL

In OC4J 9.0.3, when SSL is enabled, the call to
HttpServletRequest.isRequestedSessionIdValid() method doesn't seem to work. It always returns false when it is called even though the session has not yet expired.
On the contrary, when SSL is disabled, the HttpServletRequest.isRequestedSessionIdValid() works correctly as specified in the servlet specification.
Can anyone in this forum explain to me why HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL? Any solution for that problem?
Thanks in advance.

Hi Sanjit,
I've tried this on multiple PCs and get the same problem everywhere.
See picture with IE11 and chrome.
Sincerely,
Davy

HT3325 Keynote Remote doesn't work with hyperlinks?

Remote sync well with iPad .. Impressive
However, it doesn't work with any hyperlinks!
It's simply an image and swiping the pages ... Ignoring all hyperlinks ... It does work with media but u would have to put them in sequence in your slides. If you work with many hyperlinks within a slide, you can't get any to work with the remote!
Quite disappointed that Apple actually charges for an app so simple with no value added services!
There are many free apps doing the same simple tasks.
Thumbs DOWN.
Do something about it Apple!

Any remote that actually works?

Seconds_between doesn't work with variables in SQLScript

There is a sample procedure:
create procedure testproc
language SQLSCRIPT
as
l_curtime timestamp;
l_timedelta integer;
begin
select systimestamp into l_curtime from dual;
select seconds_between(:l_curtime, systimestamp) into l_timedelta from dual;
end;
It should return seconds between 2 timestamp values.
The code returns an error:
Could not execute 'create procedure testproc language SQLSCRIPT as l_curtime timestamp; l_timedelta integer; begin ...'
SAP DBTech JDBC: (at 160): inconsistent datatype: line 8 col 10 (at pos 160)
With «time» and «date» datatypes that's the same. So, seconds_between doesn't work with SQLScript variable (in this example, l_curtime). Is it a normal behaviour or supposed to be a bug?

Hello,
I can confirm same behavior - using variable inside seconds_between function leads to error. If you put there static string it is ok.
Of course you can always create "dummy" table (having 1 row with 1 column) where you will store the result of first call and then you will reference in second. But of course it is not that clean and it will be slower (especially if called many times).
But I would suggest to wait few more days - there should be SP03 released and everything can be different.
Tomas

Hi Team, I wuold like to know if you have any app to make Firefox OS working with cisco Call Manager 10.5. Something like Cisco Jabber for Android or iOS.

I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,

Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph

ChooseFromLists doesn't work with service calls (FormId 60110)

Similar Messages

Maybe you are looking for