Chracteristic values folder  not populated for Infoobject in query

The Query is created on an Infoset, based on 2 ODS's. In one of the ODS, the new infoobject is created and the INFOSET is adjusted appropriately . The values are displaynig correctly in the ODS and in the INFOSET, but not showing in the query. The " Chracteristics values" folder is not populating in the Query.
am i missing something?
points will be awarded.

Hi,
check this note:
BW InfoSet: Include filter value in on-condition
SAP Note Number: [1064698|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303634363938%7d]
Hope this helps.
Regards
Andreas

Similar Messages

  • Report Painter values are not populating for a particular cost center

    Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
    Can any one help me to find out where exactly the issue is and how to resolve the same..

    Please check your variables in your report.

  • Value is not populated for new field in RSA7 from PI Interface

    Hello Experts -
    We have 3.5 bw and PI 7.x. we have a  PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed  and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field. 
    Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
    Thanks for any inputs/comments.

    Hi ,
    Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
    Regards,
    Ramnaresh.P.
    Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

  • Fund Value is not populated in Vendor payment

    Hi All
    We have created new balance sheet account and we are trying to post the document. Fund value is not automatically populated.  Normally during posting commitment item related fund value is automatically populated.
    If you have any idea how to populate the fund value automatically for newly created GL Account.
    Note: Transaction code FMDERIVE we have mentioned the FUND and commitment item still the problem persist.
    Regards
    K.Gunasekar
    Edited by: KGUNASEKAR on Aug 30, 2010 12:29 PM
    Edited by: KGUNASEKAR on Aug 30, 2010 12:44 PM

    Hi
    When i am trying to post the document by manually simulation itself i am getting the fund value automatically but during manual posting without simulation i am trying to post the document at that time fund value is not populated automatically. Please help.
    Regards
    K.Gunasekar

  • Possibele entries are not populating for the fields on the selection screen

    Hi,
    Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
    Can any body help me out
    Regards,
    Amit.

    Hi,
    In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
    After this setting,check whether you are getting the data or not.
    Rgds,
    Murali

  • Rate and accessable value is not displaying for the tax invoice output

    Hello All,
      Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
    Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
        Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
    Thanks & Regards,
    ramesh

    hi Gurpreet,
    You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
    Or providing value to it in the SQL...

  • The value  is not allowed for the field Cross-plant CM

    Hello All
    When i copy material in refernce to existin gone. I am getting this message
    "The value  is not allowed for the field Cross-plant CM"
    I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
    Any help will be good...Thanks in advance...

    Hi,
    Please check the check box in front of the field config material is checked?
    If so then this material is configurable material
    A material that can have different variants.
    For example, a car can have different paint, trim, and engines.
    Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
    Please check
    BR
    Diwakar

  • Values are not populating...

    After selecting the data from LOV the values are not populating in the respective fields.
    i've checked the 'LOV' no problem in that,but im think below coding have a problem.
    declare
         b boolean;
    begin
         :global.job:=null;
         clear_form(no_validate);     
         b:=show_lov('view');
         :GLOBAL.ADDNEW1:=0;
    --     go_block('JOB_CARD_MAIN');
         GO_ITEM('JOB_CARD_MAIN.BRANCH_CODE');
         set_block_property('job_card_main',default_where,'job_no='||chr(39)||:job_card_main.job_no||chr(39));
         execute_query(no_validate);------after this line get execute the values get disappear from the field
         insert into da.mylog(username,tname,mdate,oper) values(user(),'Job Creation',sysdate,'S');
         commit;
    end;
    Pls help..

    Which trigger do you have this code in? I'm guessing it is a Key-ListVal trigger.
    Have you tested the WHE RE clause in SQL*Plus to ensure it returns a record set? Most likely, the query returns no rows which could explain why the block is empty. Also, why are you clearing the entire Form instead of just the JOB_CARD_MAIN data block? Perhaps you should try:
    Go_Block('JOB_CARD_MAIN');
    Clear_Block(NO_VALIDATE);Also, the EXECUTE_QUERY built-in does not have a NO_VALIDATE parameter. It only supports the following parameters:
    ALL_RECORDS
    FOR_UPDATE
    or the combination of the two (ALL_RECORDS,FOR_UPDATE). It also allows you to set the Locking mechinism by passing the parameter NO_WAIT.
    Just a suggestion, try your query in SQL*Plus to make sure it produces a record set and Comment out all the extra stuff in your code and only keep the SHOW_LOV, CLEAR_BLOCK, SET_BLOCK_PROPERTY and EXECUTE_QUERY to see if a row is returned. If yes, then add the rest of your code back one line at a time.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Excise base value is not picking for Imports

    Dear All,
         Excise base value is not picking for Imports when doing MIGO and BED/E CESS/S&H E CESS also not picking.
              Please suggest me
    Thanks,
    Tiru

    Hi,
    In case of Imports, you have to define following condiiton types in MM Pricing Procedure;
    JCDB     IN:Basic Custom Duty
    JCV1     IN : CVD
    JECV     IN : Ed Cess on CVD
    J1CV     IN : H&SECess on CVD
    JEDB     IN : Ed Cess on BCD
    JSDB     IN : H&SECess on BCD
    JADC     Addnl Duty of Custom
    These should be created as a delivery cost condition in M/06. And assign the accruals to these in M/08.
    Folowing Gl Accounts will be assigned to those accruals in OBYC;
    CVD Clearing (For accrual of conditions JCV1, JECV, J1CV, JADC) and Customs Clearing (For accrual of conditions JCDB, JEDB, JSDB)
    Now follow the below procedure for Import Purchase;
    1. ME21N u2013 Create Import Purchase Order (Here assign the Vendor of Customs Office to the above mentioned 7 condition types in "Details" of "Conditions")
    2. MIRO u2013 Enter Customs Invoice w.r.t. Import PO (Here select "Planned Delivery Cost" and do LIV for Customs office Vendor, enter values for duties as per Bill of Entry manullay during LIV)
    3. J1IEX u2013 Capture Bill of Entry
    4. MIGO u2013 Goods Receipt against Import PO
    5. J1IEX u2013 Post Bill of Entry
    6. MIRO u2013 Enter Vendor Invoice
    7. MIRO u2013 Enter Clearing Agentu2019s Invoice

  • Error : This balancing segment value is not valid for the current ledger

    Dear friend,
    Error : This balancing segment value is not valid for the current ledger.
    when I click Account Assignment in Budget Organization.
    I used R12
    Thank you
    Best regards,
    Hareyuya, Junior.

    Hi,
    Please see these documents.
    Note: 756765.1 - Cannot Use Parent Balancing Segment Values In Massbudget or MassAllocation Formula
    Note: 790339.1 - Cannot Select Parent Values In Mass Budgets
    Note: 437588.1 - Rel 12: Balancing Segment Value Is Not Valid For Current Ledger
    Regards,
    Hussein

  • Business Rule err The following value is not valid for the run time prompt.

    Hyperion Planning v 9.3.3
    I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
    The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
    If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
    The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
    The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
    What am I doing wrong - I have tried restarting the Planning service and the EAS service.

    My preferred method of doing this is:
    1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
    2. On the form, have business rule set to run on save, use members on data form and hide prompt.
    Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
    Deanna

  • Discount Value - 0RPA_REA Not Populating Correctly in Multiprovider ZXX_XX01

    Hi Gurus,
    Discount Value - 0RPA_REA Not Populating Correctly in Multiprovider ZXX_XX01,
    As you aware discount value (0RPA_REA) has Positive values correspond to a reduced sales value. Negative values correspond to a markup on the sales value.
    Item discounts are already taken into account in the sales value. Discounts at POS transaction level (header discounts) are only taken into account at the point of processing.
      This key figure is supplied by the Data Sources 0RT_PA_TRAN_CONTROL and 0RT_PA_TRAN_TOTALS and is filled by PIPE field REDUCTIONAMOUNT.
    Can some one let me know how to achieve the correct discount type from POSDM?
    Thanks and Regards,
    Ramesh D

    Hi Ramesh,
              As Vikrant mentioned the discount values are shown against record qualifier 1101 in 2 instances in your snapshot.Please check the receipt/MON0 and compare the discount values.
    Alternately pick anyother transaction which has maximum no of discounts and compare in RSA7.
    You may also Import/Export this transaction and verify in any other environment(DEV/TEST) etc to see the results are matching.If not matching, then possibly,some of the config TRs may be missing in PROD.
    Hope it helps.
    Best Regards,
    Aram.

  • User Defined Characteristics not populating for Batch during GR of SC PO

    We have a requirement to populate the one characteristic ( Country of origin ) of batch during GR.
    After GR the characteristics value should be displayed in Classification Tab of MSC3N transaction.
    So that I have implemented the Enhancement MBCFC004 .
    Two conditions here for Populating the Country of Origin
    1) During GR of Standard Purchase Order the Characteristics (Country of Origin) value should be mseg-oic_oland1 ( Country from Extenal Details )
        For this condition the User Exit code is working perfectly and also updating classification in MSC3N .
        NO ISSUE for Standard Purchase Order.
    2) During GR of Subcontract Purchase Order the Characteristics (Country of origin value ) should be populated from the characteristics value of Batch of
          component Material .
        For this condition the User Exit Code is working perfectly , But NOT updating classifcation in MSC3N .
        This happens for Subcontract PO.
    Can anyone suggest solution , why this happening for Subcontract Purchase Order.

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Possible Bug with SqlDataAdapter.Fillschema DataColumn.Unique values are not populated.

    Hi all,
    I have done a lot of searching for answer to this problem this evening and so far have not found a solution but have found multiple people with the same issue.
    When using SqlDataAdapter.FillSchema() from a table that contains a Primary Key and columns with Unique constraints the only DataColumn.Unique value to be populated is the Primary Key.
    From reading the MSDN entry for dbDataAdapter this is not the intended functionality
    Can anyone suggest avenues to try or where to raise this issue if the method truly is not functioning as intended?

    Hello HarborneD,
    >>When using SqlDataAdapter.FillSchema() from a table that contains a Primary Key and columns with Unique constraints the only DataColumn.Unique value to be populated is the Primary Key.
    From your description, it is not very clear how your table is defined, I tried to reproduce this issue with below table(not sure if it is similar with yours, if not, please share it with us):
    CREATE TABLE [dbo].[T20141230] (
    [ID] INT NOT NULL,
    [Name] NCHAR (10) NULL,
    [Birthday] DATETIME NULL,
    PRIMARY KEY CLUSTERED ([ID] ASC),
    CONSTRAINT uc_PersonID UNIQUE ([Name])
    And the code used to full the schema:
    SqlConnection con = new SqlConnection(@"Server=(localdb)\Projects;Database=ADO.NET;Trusted_Connection=True;");
    try
    con.Open();
    SqlCommand cmd = new SqlCommand("select * from [T20141230]", con);
    SqlDataAdapter da = new SqlDataAdapter(cmd);
    DataTable dt = new DataTable();
    da.FillSchema(dt, SchemaType.Mapped);
    da.Fill(dt);
    catch (Exception)
    finally
    con.Close();
    However, I could all columns populated with values from database. I used VS2013, .NET 4.5 and windows 8.1, you could have a try with my demo.
    >>Can anyone suggest avenues to try or where to raise this issue if the method truly is not functioning as intended
    If it is an exact issue which is not reported yet, you could post it to this site below:
    https://connect.microsoft.com/VisualStudio
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Delta records are not populating for enhanced fields in 2LIS_17_I3HDR

    Hello,
           I have an issue with 2LIS_17_I3HDR datasource, i have enhanced the DS with Zfields, these are populated from AUFK through user exit. When i fill setup table, i can see the values being populated for enhanced fields, but for delta records, i dont find any values for these enhanced fields, even though the values exists in the AUFK table and i even tried degugging the user exit code, it doesnt go through it during the posting of delta records.
    Can some one give some suggestion on this issue.
    Thanks,
              Pavan

    Hello Ravi,
                     Yes, delta records cannot be populated by enhanced fields. Here the issue is different,
    i have added a closed date to the extract structure, this is order specific, so when i create a new PM order after the full load, and release the order and close it, the AUFK table get an entry for closed date, my exit compare the object number of the extractor to object number in AUFK and get the closed date value to the DS, this is not same as enabling delta on the enhanced fields (which cant be done).
    Thanks,
                Pavan

Maybe you are looking for