Chrome bezel scratching - my results for getting rid of the issues

well, I was nervous as **** about it, but an incase case managed to scratch the bezel and give it blotchy marks.
I had tried cleaning it and using a very very mild polish, but nothing worked.
So I decided to take teh plunge, with the feeling that if it didnt work, id sand the bezel down to a matte finish.
I used Autosol metal polish, very lightly and carefully, followed by meguiars scratch x to clean up the finish and add some resiliancy, followed by a finishing polish, i.e. a foam based one, usually used with the final polishing on a car before shipping.
It worked! PERFECTLY! even worked on the back of the phone, 99.9% of the scratching is gone.
I dont want to go any deeper or harder in fear of stripping it, but it looks ten times better!

Ok well as you can see from the pictures above, thats it in it's current state, so I decided to mask up the phone and give it a **** good polish this time.
I used a microfiber cloth and a standard polishing cloth, Autosol Metal polish, Meguiars ScratchX, Masking Tape, and a can of WD40 and some window cleaning spray. All will become clear
So here's the phone and the cloths etc phones been masked up with alot of masking tape.
http://img17.imageshack.us/my.php?image=phoneclean1.jpg
Heres the masked phone after I've started with the metal polish
http://img27.imageshack.us/my.php?image=phoneclean2.jpg
Now in the middle of polishing, Look how black the cloth has gotten on that one side alone!
http://img4.imageshack.us/my.php?image=phoneclean3.jpg
The top bezel after one round of polish, looking alot better with only one or two scratches visible
http://img4.imageshack.us/my.php?image=phoneclean4.jpg
Now time for the back, I've removed the masking tape, and predictibly, there is some residue which the Meguiars will remove for me, and clean up the back end.
http://img4.imageshack.us/my.php?image=phoneclean5.jpg
Polish Going On, I should point out that the meguiars is a very gently finishing polish, so i didnt go to heavy here, and I was careful to avoid the camera
http://img15.imageshack.us/my.php?image=phoneclean6.jpg
Letting the polish dry before buffing off
http://img518.imageshack.us/my.php?image=phoneclean7.jpg
At this point the phone was clean so to speak, There was some residue on there from the tape and polish, so spraying a little WD40 on the cloth and wiping it over removed all of that, esp in the little bits where it got through the mashing between the bezel and the screen, took a firm touch but it worked perfectly. After that, I wiped it down thoroughly and took a fresh cloth, microfibre in this case and not the one I was polishing on, and cleaned it with window cleaning spray. Before finally rubbing it over thoroughly to remove any excess. I used a little tiny bit of water on another cloth to remove any alcohol that could have been left by the window cleaning spray
Finished back
http://img19.imageshack.us/my.php?image=phoneclean8.jpg
Quick Photo of the Size Bezel, now greatly reduced in scratches and no blemishes and still shiny!
http://img8.imageshack.us/my.php?image=phoneclean9.jpg
And another of the the other side, still shiny though the picture makes it look a little rough, even though it isnt
http://img8.imageshack.us/my.php?image=phoneclean10.jpg
And another of the back again, different angle
http://img4.imageshack.us/my.php?image=phoneclean11.jpg
All in all I'm very pleased with how it turned out, despite absolutley bricking it and very nearly not doing it at all in fear of destroying it. It worked with a gently touch. Phone looks and feels like new

Similar Messages

  • Updated to Mavericks and I get the upper left quarter of the screen blacked out on Time Machine. This means that I can't see the files. Any suggestions for getting rid of the black square?

    Ive tried disconnecting and reconnecting the Time Machine. And I've tried rebooting the iMac, but I still get the top left hand quarted of the screeen blacked out. I can scroll back through the back-ups but the back square means that I can't see the details of any file.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT204407 "Location Not Available" label for one friend and they have the same result for finding me. The issue has not been resolved from reading this article.

    I always get 'Location Not Available' for one of my contacts in the Find My Friends app. This same friend get's the same message when trying to find me. The app and the iOS software on both iPhones is up to date, the dates and time on both iPhones are correct and both iPhones are in the UK where the Find my Friends service works fine.
    There is one condition in which we can see where each other is and that is by having the app open on both phones, this is unlike all my other  contacts within the Fnd my Friends app where I can see where they are despite the app not being open on their devices. Can anyone help? It's really bugging us.

    For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may
    help resolve your problems.
    1.) Completely shut down your printer and restart it
    2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and
    then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at
    a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from
    completing.
    a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to
    reattach to the cloud.
    b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no
    ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
    I am an HP employee

  • There is a particularly intrusive BMW app advert that pops up when playing Words with Friends that I can't get rid of.  There doesn't appear to be an exit option (most unethical). Any suggestions on how to get rid of the advert out ther?

    There is a particularly intrusive BMW app advert that pops up when playing Words with Friends that I can't get rid of.  There is no exit option (most unethical).  Any solutions for getting rid of the advert out ther?

    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • I have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it

    i have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it,, i have iphone 5

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard (command-C).
    In the Finder, press the key combination command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for  anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

    How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for  anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How do I get rid of the red update number on app store?  I have an update for an appmwhich requires ios6 which I cannot get on my iPad and there for cant do the update it is really annoying

    I have an update for an app which I cannot update as it requires ios6 which I cannot get on my iPad - how do I get rid of the little red number?  It is really annoying

    Does this apply?
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

  • How do I get rid of the pop-up on my ipad2 that wants me to login to iCloud for an account i changed to a new userid?

    How do I get rid of the pop-up on my ipad2 that wants me to login to iCloud for an account i changed to a new userid?
    It is an iPad 2, 64GB, with wifi and 3G, running the latest iOS 8.1.2, with 43.7 GB available. I am not using the cloud. Everything I need is backed up, so loss of the information on this device is not critical.
    About 2 years ago I canceled this account and created a new one when I abandoned my road runner email and change to gmail. Tech support talked me through the transition then and it is fine on all my devices (iPhone, Mac-mini, Macbook Air) except the iPad 2, which i use the most. The same thing happened to my mothers iPad 3 a few months ago, with the same repeating pop-up after changing email/appleid accounts), Apple support helped me restore hers, but mine is no longer a covered device.
    This issue started about a year ago, I can cancel the pop-up but it continues to returns, it went away for a few months, then somewhere in the last few months it started happening daily, now it cycles through about every 5 - 15 seconds. Can't do anything, I have reset the iPad 2 all that did was delete my existing settings, it will not accept the old password all I can do is cancel it (until it returns again).
    Need the directions to delete the old appleid and accept the new applied on this device.

    Does this apply?
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

  • I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

    I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
    iPad

    I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
    I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

  • I want to get rid of the Bing screen but there is no "menu at the top of the Firefox window" for me to "select Tools and then select the Add-ons menu item. "

    I suddenly have a "Bing" screen when I sign onto Firefox---and I want to get rid of it. The support section of Firefox says
    1. "From the menu at the top of the Firefox window, seledt Tools and then select the Add-ons menu item."---but I see no "menu item" nor Tools, much less Add-ons.
    2. "In the Add-ons window, click on the Extensions panel."---but how do I find the Add-ons window?
    3. Find the Bing Bar and Search Helper Extension in the list and click Disable for each of them."---but what and where exactly is that?
    At the top of the screen is only a Yahoo icon on the left and to the right of it a search box, "Web Search,", "My Apps," Yellow Pages," "Weather," "Updates," and "Skype." to the right of those there is a green cross saying "Add more apps. to your toolbar" and to the right of that a sort of gear shift looking icon saying "toobar settings."
    So, in short, how do I get rid of the Bing screen and how do I access those Tools?
    Thanks.

    To get rid of Bing Search Window..............
    Click on View tab / Tools and un-check 'Search' (alias for 'Bing')

  • After deleting a song from my iPhone, it still playing. How can i stop that? How can i get rid of the song once for all?

    After deleting a song from my iPhone, it still playing. How can i stop that? How can i get rid of the song once for all?

    I'm pretty sure that the solution is in the settings of her email

  • When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

    when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

    What is the Other on my iPhone and How to Remove It
    An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • I was happy with the previous version - can i get rid of the upgrade and go back to "normal" for me - i don't have time to relearn everything. it's annoying.

    I don't like many aspects of the updated version I downloaded a few months ago - I haven't even tried a newer version popping up in the corner of my desktop. I would like to get rid of the updated version and go back to the previous one. It suits my simple needs.

    If you want to change the layout to be more like Firefox 3.6, you can do so. Firefox 9.0.1 is the current version and Firefox 10 will replace it at the end of January 2012. The only other version of Firefox that is currently supported and updated is Firefox 3.6.25, '''<u>but support for the Firefox 3.6 version is likely to end soon</u>'''.
    To change newer Firefox versions to look more like Firefox 3.6.x:
    *See --> https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36
    *See --> http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
    *See --> http://blog.fligtar.com/2011/01/16/how-to-customize-firefox-4s-ui/
    *See --> '''''Firefox 3 Theme for Firefox 4+''''': https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
    **Add color home, back/forward and other buttons (like Firefox 3) to the Navigation Toolbar in place of the gray buttons in Firefox 4+
    **See: http://ffaddons.game-point.net/ff3ff4/
    *Also see: http://support.mozilla.org/en-US/kb/How+to+customize+the+toolbar
    Firefox 3.6.25 (supported/updated only for a short time):
    *Download --> https://www.mozilla.org/en-US/firefox/all-older.html
    *See --> http://kb.mozillazine.org/Go_back_to_an_old_version_of_Firefox
    *For a smoother downgrade transition --> http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    *You also might want to see:
    **http://support.mozilla.org/en-US/kb/Backing+up+your+information
    **http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you

    I try to get as many items as I can in the bookmarks menu toolbar (typically using 3 letter names). F4 adds an icon next to each name - taking up valuable space. How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you.

    If you remove the names then you may have a problem with organizing or searching for bookmarks.<br />
    If you do not want to use the extension then you can achieve the same effect with code in userChrome.css<br />
    That is what I would do.
    Add code to userChrome.css below the @namespace line.
    * http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #personal-bookmarks .toolbarbutton-icon { display:none !important;}
    </nowiki></pre>
    * http://kb.mozillazine.org/Editing_configuration
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

Maybe you are looking for

  • MacBook error "USB Port has drawn too much power"

    Hi,      I recently found a external hard drive and accidentally forgot to switch the volt down on my power brick, and ended up with 24 volts charging up to my white macbook 2008. It immediately shut down and i could smell some smoke coming from the

  • Report painter header text with customize variable

    Hi All, Can we have a customize variable/ logic based on the selection parameter in the header text(not in the report's columns) in report painter? understand the standard sap provides a few standard options, gen, variables, sel. parameters, spec. va

  • UDS and Oracle

    Is anyone having trouble utilizing stored procedures in Oracle? Specifically selecting nextval and currval from dual? nextval doesn't actually execute, but kind of looks like it did minus legitimate values, and currval blows up with a bogus Oracle er

  • Mighty Mouse stopped working, help!

    I have been using my corded Mighty Mouse since 2007 with no problems. I have encountered problems with the scroll ball getting clogged but have always been able to clean it. However recently the mouse just stopped working unless I put it on a texture

  • Need more error information from RWB

    Hello, I am looking at the audit log for a process that I ran. I am using the communication channel monitoring a selecting the communication channel to get the details. in the audit log there is a entry with a type "Warning" and the description "erro