CIF Error: Setup group/key 10000427 does not exist

Dear CIF-Specialists,
We observed a problem on the integration between APO and R/3.
If we want to send PPM's from R/3 to APO we have the following error-message: "Setup group/key 10000427 does not exist".
Transaction CFM1 (Create Integration Modell) ==> No problem
Transaction CFM2 (Activate Integration Modell) ==> Error!
We don't use setup groups or keys in our operations but we have created the setup keys in APO and R/3 (Transaction: /SAPAPO/CDPSC6 and OP43).
As we don't have keys in the PPM's it is normal that they don't exists.
Do you have an idea where we have to set theses Setup keys?
Can you give us an indication how we could resolve this problem?
Thank you.
Best regards,
Thomas

Dear Sharath,
Thank you for your reply.
We dont't have setup key or group maintained in this receipt. This is the strange part on this problem.
Why does it search for a setup key if we don't want to transfer it?
I checked also the setup-keys in APO and R/3 and they are the same.
We did a copy of the test-system (where the problem occurs) some days ago. Is there a table in APO where it could have some old entries about this?
Thank you for your help.
Thomas
Edited by: Ricci Olivier on May 12, 2008 11:39 AM

Similar Messages

How to correct CIF error Base unit of measure does not exist?

Dear experts,
I'm trying to cif a location product with base unit of measure KG in R/3 and alternative unit of measure well maintained.
it gives me a CIF queue saying that
"Base unit of measure ZXX does not exist (Product 0000000000000XXXXXX has not been created)"
I do not understand why, the unit ZXX does not exist in the alternative unit of measure for any of the materials managed
I also checked CUNI table and ZXX is not there neither in R/3 or APO,
Thanks for your help
E

Looks like the Alternate UOM --Zxx is not maintained in APO.
2 ways to do this:
(1) program- RSIMPCUST
Re transfer all your UOM settings from R3 to APO
(2) Manual Maintenance in APO:
SPRO>SAP NETWEAVER>GENERAL SETTIGNS>Check UNits of Measurement
Thanks
Kumar

Error 'The location you entered does not exist or is flagged as inactive.'

Hi
In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
Appreciate any pointers on the same.
Thanks
Alagappan
Edited by: user5733015 on Dec 19, 2009 8:35 PM

Hi Hussein
Thanks for the update.
I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
Can you give me some insights 'What could be the actual problem'?
Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
Appreciate all your help.
Thanks
Alagappan

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

REP-52005: The specified key userlogin does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services                       ;
; CGICMD.DAT                                      ;
; Example CGICMD.DAT Mapping file                 ;
; Syntax:
;      KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
;    1. Parameter on command line to the reports servlet
;          e.g. http://machine/servlet/rwservlet?KEY
;    2. Parameter on command line to a reports jsp
;          e.g. http://machine/mydir/myreport.jsp?KEY
;    3. Within a reports jsp - in the rw:report custom tag
;          e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
;   2. Extra spaces are ignored. Multi-line entries allowed.
;   3. Lines starting with ";" character are treated as a comments.
;   4. Comments within a key or key value are NOT allowed.
;   5. NLS language support is provided and can be used (encoding should match the one
;      used in HTML request - no language conversion of any kind is attempted.
;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
;      The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb:         userid=oe
;parmformjsp:        userid=oe
;tutorial:           userid=oe
; Paper Reports
;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priya

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Getting Process instance with key '0' does not exist.

I am doing a request based provisioning task.When I request for a resource the approvers are able to approve the request but the user is not created.
I am getting the below exception at the backend:-
[XELLERATE.APIS],Class/Method: tcProvisioningOperationsBean/getProcessDetailData encounter some problems: Process instance with key '0' does not exist.
[11/2/12 0:30:13:640 EDT] 00000097 SystemOut O ERROR,02 Nov 2012 00:30:13,639,[XELLERATE.WEBAPP],Class/Method: RequestApprovalDetailAction/requestDetail encounter some problems: Process instance with key '0' does not exist.
Thor.API.Exceptions.tcAPIException: Process instance with key '0' does not exist.
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetailData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcProvisioningOperations_6b2f800a.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces._tcProvisioningOperations_Stub.getProcessDetail(Unknown Source)
     at Thor.API.Operations.tcProvisioningOperationsClient.getProcessDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor309.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:337)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:118)
     at Thor.API.Security.LoginHandler.websphereLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy6.getProcessDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.setStandardApprovalDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.requestDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor665.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1096)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1037)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
     at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:832)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:566)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
     at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1818)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)

Process instance with key '0' does not exist
Such issue typically appears when the Provisioning is initiated without "Auto Save" i.e. before ORC_KEY entry goes in the OIU table...
Second possibility can be that the mandatory attributes in the process form are not populated..
Third possibility can be that the Status is Waiting... And Resource is dependent on another Resource...
Are you able to Direct Provision the account? I mean without raising Request Based provisioning?
Please give us following details:
(1) Resource Profile:-status of Auto Save
(2) Approval Process:- status of Auto Save and Auto Pre-Pop
(3) Prov Process:-status of Auto Save and Auto Pre-Pop.
(4) Is the object form properly populated?
(5) Is the Process form properly populated?
(6) Any Exception occurred during Approval process?
(6) In the OIM Database, fire the following query:-
SELECT OIU.ORC_KEY
FROM OIU, USR, OBI
WHERE OIU.USR_KEY=USR.USR_KEY
AND UPPER(USR.USR_LOGIN)=UPPER('ABCDEFGH_USER')
AND OBI.OBI_KEY=OIU.OBI_KEY
AND OBI.OBI_KEY IN (SELECT OBI.OBI_KEY FROM OBI,OBJ WHERE OBI.OBJ_KEY=OBJ.OBJ_KEY AND
UPPER(OBJ.OBJ_NAME)=UPPER('AD USER'))
This will show whether any proper ORC_KEY was generated for this resource instance..

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

hi,
i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
i have added the key mapping entry in cgicmd.dat file with the name userlogin
as
userlogin: userid=scott/tiger@devdb %*
report_server: server=cluster_reports %*
but still this error,

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key replabel does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

AP Group VLAN "Feelgood" does not exists on controller.

Hi,
While appling tenplates from WCS, i getting status report error message AP Group VLAN "Feelgood" does not exists on controller.
I have double checked the perticular AP group WLAN is created & mapped to the correct interface in the controller. This is not first AP group created on the controller, other AP groups are working on the same controller.
Is there any Bug?
Thanks

Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
Sent from Cisco Technical Support iPad App

Ora-23404:refresh group HR.MV_EMP does not exist

Hi,
i am getting following error when refreshing materialized view ,
exec dbms_refresh.refresh('HR.MV_EMP');
ORA-23404: refresh group "HR.MV_EMP" does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_REFRESH", line 23
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
Thanks,

Mohammed,
The DBMS_REFRESH package works on groups of materialized views, not single views. The argument you pass should be the name of a group of views, not the name of a view. There is no group called MV_EMP, hence the error.
To use this you would need to create a group using:
DBMS_REFRESH.MAKE (groupname, view_list, parameter_list)
where view_list is a list of materialized views to include in the group, and parameter_list defines various properties of the group, including when it is refreshed.
followed by:
DBMS_REFRESH.REFRESH (groupname)
See this link for further information:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrefreshpac.htm#i94057
If you just want to refresh this single view, though, it is better to use the DBMS_MVIEW package:
DBMS_MVIEW.REFRESH ('HR.MV_EMP')
Edited by: user10827032 on 20-Jan-2009 07:10

The scheduling margin key 000 does not exist

Hi guys
There is query from my side please do help me out
to get a solution for the following query
i was asked to give schedMarginKey = 000 while creating
a material for MRP(material requirement Planning)
but if i give schedMarginKey = 000 and save this it shows the
following error
The scheduling margin key 000 does not exist for plant JOP1
is ther any transaction code to overcome this?
please do help me out in this!!
Regards
Jino.

Hi
You can miantain the schedule margin key using t.code OMDC.
reward points if useful
Thanks & Regards
Kishore

Rep-52005 specified key PSREP does not exist in key map file

Hi there,
i am trying to reduce the length of my URL when calling a report (9iDS) from a parameter form
in 9i using web.show_document(url,'target'). I have defined a key "psrep" at the end of my cgicmd file at reports\conf . The error i get is
rep-52005 specified key PSREP does not exist in key map file.Stuck here.
Any help gr8ly appreciated.
Regards.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

CIF Error: Setup group/key 10000427 does not exist

Similar Messages

Maybe you are looking for