The scheduling margin key 000 does not exist

Hi guys
There is query from my side please do help me out
to get a solution for the following query
i was asked to give schedMarginKey = 000 while creating
a material for MRP(material requirement Planning)
but if i give schedMarginKey = 000 and save this it shows the
following error
The scheduling margin key 000 does not exist for plant JOP1
is ther any transaction code to overcome this?
please do help me out in this!!
Regards
Jino.

Hi
You can miantain the schedule margin key using t.code OMDC.
reward points if useful
Thanks & Regards
Kishore

Similar Messages

K/834 no standard cost estimate and ke435 costing key 000 does not exist

Hi ,
scenario as under we have following type of materials
normal Material that has cost estimate
Configuarable material
Material without cost estimate -prices are updated thru MR21 (as some legacy system calculated the price)
There are many company codes and use one or more above category of material. further we have common Material type and valuation class.
we need cost component split to get updated in COPA and for that i create 2 costing key one for normal and other for normal one and developed an enhancement (KEPC) that check whether material is configurable or not. based on that it assign 001 or 002 costing key
it went well but failed for material that has no cost estimate and got error K/834.
To tackle same we insert further logic to check for normal material whether cost estimate exist, if yes then assign costing key 001 else ignore it. configurable material logic remain as it is. it working fine for normal and Configuarable material but normal material without cost estimate resulted in error KE435.
need to know:
-at first place why system generates K/834 error for enhancement - earlier we were using assignment rule (KEPC) where we use valuation class and assigned costing key 001, it worked for normal one and ignore configurable one and normal material without cost estimate. I haven't changed costing key rule and exclusive error is not marked .
- any other way to tackle besides resetting message class from error to warning or changing Materila type or valuation class as that is not acceptable due to other complexity.
Regards,
Atul

Hi,
It resolved thru enhancement
Regards,
Atu

"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket

Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?

Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

REP-52005: The specified key userlogin does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
; construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
; 1. Multiple keys in this file MUST be separated by an EXTRA empty line.
; 2. Extra spaces are ignored. Multi-line entries allowed.
; 3. Lines starting with ";" character are treated as a comments.
; 4. Comments within a key or key value are NOT allowed.
; 5. NLS language support is provided and can be used (encoding should match the one
; used in HTML request - no language conversion of any kind is attempted.
; 6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
; The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb: userid=oe
;parmformjsp: userid=oe
;tutorial: userid=oe
; Paper Reports
;xmldata: userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper: userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements: userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priya

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

hi,
i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
i have added the key mapping entry in cgicmd.dat file with the name userlogin
as
userlogin: userid=scott/tiger@devdb %*
report_server: server=cluster_reports %*
but still this error,

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

REP-52005: The specified key replabel does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
 Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
 The main program was "ZQMR_BILDIRIM ".
 In the source code you have the termination point in line 732
 of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
 The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
 occurred in
 procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
 declared
 in the RAISING clause of its signature.
 The procedure is in program "SAPDBZQNQ "; its source code begins in line
 715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
 INTO l_tab_fields.
IF sy-subrc <> c_rc00.
 CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
 INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
 WHERE qmnum = rqmqmel-qmnum
 AND kzloesch = space
 AND (l_ds_clauses-where_tab)
 ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist

Hello,
I'm trying to install Solman 4.0 Unicode. When I start sapinst and select a Central System, I get an error before it even gets to the point where I can input some parameters. The error is below, has anyone experienced this? Thank you.
~TJ
ERROR 2006-08-17 09:29:20 [iaxxctbctl.cpp:128]
 CTableControl::retrieveDefaultValue
FGE-00003 The key db column VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist.
TRACE [iaxxejsbas.hpp:388]
 handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2006-08-17 09:29:20
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2006-08-17 09:29:20
FCO-00011 The step selectUsages with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP Solution Manager 4.0 > SAP Systems > IBM DB2 UDB for iSeries > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to G:\usr\sap/SAPinst/SOLMAN/SYSTEM/DB4/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
INFO 2006-08-17 09:32:31 [iaxxgenimp.cpp:779]
 showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages".

FYI - I was using the NW2004s control file patch not NW2004sSR1. Once using the correct control files it worked.
~TJ

Getting Process instance with key '0' does not exist.

I am doing a request based provisioning task.When I request for a resource the approvers are able to approve the request but the user is not created.
I am getting the below exception at the backend:-
[XELLERATE.APIS],Class/Method: tcProvisioningOperationsBean/getProcessDetailData encounter some problems: Process instance with key '0' does not exist.
[11/2/12 0:30:13:640 EDT] 00000097 SystemOut O ERROR,02 Nov 2012 00:30:13,639,[XELLERATE.WEBAPP],Class/Method: RequestApprovalDetailAction/requestDetail encounter some problems: Process instance with key '0' does not exist.
Thor.API.Exceptions.tcAPIException: Process instance with key '0' does not exist.
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetailData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcProvisioningOperations_6b2f800a.getProcessDetail(Unknown Source)
     at com.thortech.xl.ejb.interfaces._tcProvisioningOperations_Stub.getProcessDetail(Unknown Source)
     at Thor.API.Operations.tcProvisioningOperationsClient.getProcessDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor309.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:337)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:118)
     at Thor.API.Security.LoginHandler.websphereLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy6.getProcessDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.setStandardApprovalDetail(Unknown Source)
     at com.thortech.xl.webclient.actions.RequestApprovalDetailAction.requestDetail(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor665.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1096)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1037)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
     at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:832)
     at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:679)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:566)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:748)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
     at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1818)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)

Process instance with key '0' does not exist
Such issue typically appears when the Provisioning is initiated without "Auto Save" i.e. before ORC_KEY entry goes in the OIU table...
Second possibility can be that the mandatory attributes in the process form are not populated..
Third possibility can be that the Status is Waiting... And Resource is dependent on another Resource...
Are you able to Direct Provision the account? I mean without raising Request Based provisioning?
Please give us following details:
(1) Resource Profile:-status of Auto Save
(2) Approval Process:- status of Auto Save and Auto Pre-Pop
(3) Prov Process:-status of Auto Save and Auto Pre-Pop.
(4) Is the object form properly populated?
(5) Is the Process form properly populated?
(6) Any Exception occurred during Approval process?
(6) In the OIM Database, fire the following query:-
SELECT OIU.ORC_KEY
FROM OIU, USR, OBI
WHERE OIU.USR_KEY=USR.USR_KEY
AND UPPER(USR.USR_LOGIN)=UPPER('ABCDEFGH_USER')
AND OBI.OBI_KEY=OIU.OBI_KEY
AND OBI.OBI_KEY IN (SELECT OBI.OBI_KEY FROM OBI,OBJ WHERE OBI.OBJ_KEY=OBJ.OBJ_KEY AND
UPPER(OBJ.OBJ_NAME)=UPPER('AD USER'))
This will show whether any proper ORC_KEY was generated for this resource instance..

CIF Error: Setup group/key 10000427 does not exist

Dear CIF-Specialists,
We observed a problem on the integration between APO and R/3.
If we want to send PPM's from R/3 to APO we have the following error-message: "Setup group/key 10000427 does not exist".
Transaction CFM1 (Create Integration Modell) ==> No problem
Transaction CFM2 (Activate Integration Modell) ==> Error!
We don't use setup groups or keys in our operations but we have created the setup keys in APO and R/3 (Transaction: /SAPAPO/CDPSC6 and OP43).
As we don't have keys in the PPM's it is normal that they don't exists.
Do you have an idea where we have to set theses Setup keys?
Can you give us an indication how we could resolve this problem?
Thank you.
Best regards,
Thomas

Dear Sharath,
Thank you for your reply.
We dont't have setup key or group maintained in this receipt. This is the strange part on this problem.
Why does it search for a setup key if we don't want to transfer it?
I checked also the setup-keys in APO and R/3 and they are the same.
We did a copy of the test-system (where the problem occurs) some days ago. Is there a table in APO where it could have some old entries about this?
Thank you for your help.
Thomas
Edited by: Ricci Olivier on May 12, 2008 11:39 AM

Rep-52005 specified key PSREP does not exist in key map file

Hi there,
i am trying to reduce the length of my URL when calling a report (9iDS) from a parameter form
in 9i using web.show_document(url,'target'). I have defined a key "psrep" at the end of my cgicmd file at reports\conf . The error i get is
rep-52005 specified key PSREP does not exist in key map file.Stuck here.
Any help gr8ly appreciated.
Regards.

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Primary key 1700 does not exist...

Hello,
I have a strange behaviour with my Entity bean. I am trying to make an update of an entity bean through a session bean, and it works only for primary keys inferior to a precise number (maybe 1700).
Otherwise the update throws the following error :
javax.ejb.NoSuchEntityException: [EJB:010142]Instance of EJB 'VEtHr' with primary key '1999' does not exist.
Do you have any idea about the problem ?
Thanks... :-)
Do I need to change the <max-beans-in-cache> variable? (I have already tried with a very big number).
Regards,

The problem is strange because before trying the update method of EJB, I am trying to get the full line by the id (getByPrimaryKey). And it works. I get all data for primary key =5002 for example.
But when I try to update it, I get this message :
; nested exception is:
javax.ejb.NoSuchEntityException: [EJB:010142]Instance of EJB 'VEtHr' with primary key '5002' does not exist.
My update method is just like this :
public void updateVEtHr(VEtHrDto vEtHrDto) throws RemoteException {
if (vEtHrDto != null) {
Integer hrId = vEtHrDto.getHrId();
try {
VEtHr vEtHr = vEtHrHome.findByPrimaryKey(hrId);
setVEtHrFromVEtHrDto(vEtHr, vEtHrDto);
catch (FinderException e) {
throw new RemoteException(e.getMessage());
}

Key figure does not exist

Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
Yoni

Hi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran.

The material 332-369090-00 does not exist or not activated

Hi Experts,
Kindly Look at into this error which I am facing in the PRD system.
Materials listed below doesn't exist (or) not activated in the Source system.
1. The material 332-369090-00 does not exist or not activated
2. The material 410-051003 does not exist or not activated
2LIS_02_SCL-Purchasing Data (Schedule Line Level) -
This data source is going to the below data targets.
1. Purchasing Data - ZPUR_C01
2. Purchasing Groups - ZPUR_C04
3. Backlogged Purchase Order Schedule Lines ZPUR_C10
Like this no of materials available in BWPRD but not available in R/3 PRD source system .so how to delete specific master data records for material
Regards
Pinky
Edited by: pinky reddy on Jul 27, 2009 2:09 PM
Edited by: pinky reddy on Jul 27, 2009 2:09 PM

Easiest way to solve this is to check the mara table in R/3. try and find your material there. If its not there, then it either has been manually created or loaded from a different source system. Check all the source systems if anyone has loaded them. Then check your cubes and ODSs if you can find any transactional data for these materials. If yes, then there is a possiblity that maybe it was created to correct a failed load. You should then identify the document and compare the same on in R/3.
If this material is used in any transaction data, then you can simply delete it. RSA1-> Find the infoobject(characteristic)-> Maintain master data-> Give the material nos-> select the row and press the delete button.
Regards.

The scheduling margin key 000 does not exist

Similar Messages

Maybe you are looking for