AP Group VLAN "Feelgood" does not exists on controller.

Hi,
While appling tenplates from WCS, i getting status report error message AP Group VLAN "Feelgood" does not exists on controller.
I have double checked the perticular AP group WLAN is created & mapped to the correct interface in the controller. This is not first AP group created on the controller, other AP groups are working on the same controller.
Is there any Bug?
Thanks

Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
Sent from Cisco Technical Support iPad App

Similar Messages

Ora-23404:refresh group HR.MV_EMP does not exist

Hi,
i am getting following error when refreshing materialized view ,
exec dbms_refresh.refresh('HR.MV_EMP');
ORA-23404: refresh group "HR.MV_EMP" does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_REFRESH", line 23
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
Thanks,

Mohammed,
The DBMS_REFRESH package works on groups of materialized views, not single views. The argument you pass should be the name of a group of views, not the name of a view. There is no group called MV_EMP, hence the error.
To use this you would need to create a group using:
DBMS_REFRESH.MAKE (groupname, view_list, parameter_list)
where view_list is a list of materialized views to include in the group, and parameter_list defines various properties of the group, including when it is refreshed.
followed by:
DBMS_REFRESH.REFRESH (groupname)
See this link for further information:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrefreshpac.htm#i94057
If you just want to refresh this single view, though, it is better to use the DBMS_MVIEW package:
DBMS_MVIEW.REFRESH ('HR.MV_EMP')
Edited by: user10827032 on 20-Jan-2009 07:10

CIF Error: Setup group/key 10000427 does not exist

Dear CIF-Specialists,
We observed a problem on the integration between APO and R/3.
If we want to send PPM's from R/3 to APO we have the following error-message: "Setup group/key 10000427 does not exist".
Transaction CFM1 (Create Integration Modell) ==> No problem
Transaction CFM2 (Activate Integration Modell) ==> Error!
We don't use setup groups or keys in our operations but we have created the setup keys in APO and R/3 (Transaction: /SAPAPO/CDPSC6 and OP43).
As we don't have keys in the PPM's it is normal that they don't exists.
Do you have an idea where we have to set theses Setup keys?
Can you give us an indication how we could resolve this problem?
Thank you.
Best regards,
Thomas

Dear Sharath,
Thank you for your reply.
We dont't have setup key or group maintained in this receipt. This is the strange part on this problem.
Why does it search for a setup key if we don't want to transfer it?
I checked also the setup-keys in APO and R/3 and they are the same.
We did a copy of the test-system (where the problem occurs) some days ago. Is there a table in APO where it could have some old entries about this?
Thank you for your help.
Thomas
Edited by: Ricci Olivier on May 12, 2008 11:39 AM

Error on deleting page group (Path ID does not exist)

Hello
I'd like to delete a page group of my project. Normally I have no problem with that. But sometimes the following exception is thrown and the group can not be deleted:
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while deleting page. (WWC-44130)
Path ID does not exist. (WWC-50001)
Can anybody help me?
Chrigel

hi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian

LWAPP 1231 does not join the controller

I have LWAPP AIR-AP1231G-A-K9 that was moved from one site to the other one. It has now a different IP address taken from DHCP and its former controller does not exist any more.
I am trying to join it to the same kind of controller which is AIR-WLC4402-12-K9 with 7.0.98.0.
However the AP cannot join the controller, first I got these on the controller
0 Wed Jul 3 14:12:56 2013 AAA Authentication Failure for UserName:0014694b3ab2 User Type: WLAN USER
1 Wed Jul 3 14:12:56 2013 Failed to authorize AP with Base Radio MAC 00:14:69:4b:3a:b2. Authorization entry does not exist in Controller's AP Authorization List.
I added the MAC address of the AP into MAC filtering, and now getting these
AAA Authentication Failure for UserName:0014694b3ab2 User Type: WLAN USER
I am reading several discussions, but they seem to be related to mesh OS mismatch.
My AP is for sure not with mesh OS as it was connected to the controller before the move.
System image file is "flash:/c1200-k9w8-mx.124-23c.JA/c1200-k9w8-mx.124-23c.JA"
#sh capwap client config
swVer 7.0.98.0
Does anyone know what to do to get the AP joined to the controller ?
I had another AP where I tried to reset the LWAPP config - clear lwapp private-config, but this did not help and this AP is now constantly rebooting without allowing me to login. It looks like the only way how to wake it up would be to convert to autonomous and then back to LWAPP which is something I cannot do as I am too far from it.
Thanks,
Vlad

Hello George,
Many thanks. I have not converted the AP from autonomous to lwapp, it has been lwapp since the very beginning. We just moved this AP from one site where it was successfully joined the controller as lwapp to other site where I am trying to join the same kind of controller with the same OS, same general settings but different IPs.
I do not understand what could happen to the AP as for sure it was just shipped and not touched IT wise.
Anyway, I will try the excersise described in the link above.
Thanks,
Vlad

User or group does not exists.

Hi,
I am running an unattented installation of SQL on a server. I run it with the following configuration:
;SQLSERVER2008 Configuration File
[SQLSERVER2008]
;************************* CORE ARGUMENTS *************************
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
; Setup will not display any user interface. ***
QUIET="True"
; Needed argument for silent installation
IACCEPTSQLSERVERLICENSETERMS="True"
;*************************** OPTIONAL *****************************
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console. ***
INDICATEPROGRESS="True"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
ENU="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
Services (RS).
INSTANCENAME="MSSQLSERVER"
; Agent account name
AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Auto-start service after installation. ***
AGTSVCSTARTUPTYPE="Automatic"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT AUTHORITY\NetworkService"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Latin1_General_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS=”CRB\dsstest”
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS=”CRB\dsstest”
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Specifies which mode report server is installed in.
; Default value: “FilesOnly”
RSINSTALLMODE="DefaultNativeMode"
; Full-Text filter launcher service account
FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
I run the installation with the user crb\dsstest, but i get the following error:
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Can anyone help me?

Hi,
I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
The following are the error details:
2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
2011-12-28 12:58:47 AS: Action: Validating Account
2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
2011-12-28 12:58:47 AS: Result: Error
2011-12-28 12:58:47 AS: Result: Invalid
2011-12-28 12:58:47 AS: Result: (Validation) Complete
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Result: (Utility) Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
2011-12-28 12:58:47 AS: Result: (Utility) Success
2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
2011-12-28 12:58:47 AS: Result: Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Validating Start Mode
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Action: Validating Allow in Process
2011-12-28 12:58:47 AS: Data: AllowInProcess=1
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: ----------------------------------------------
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp:     Message:
2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:     Data:
2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp:       DisableWatson = true
2011-12-28 12:59:02 Slp:     Stack:
2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp:         Message:
2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Do you need more information then above? The above chech do not fail for the network service:
2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
2011-12-28 12:58:46 ACE: Validating service account is not LocalService
2011-12-28 12:58:46 ACE: Validating service account is a user account
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
2011-12-28 12:58:46 AS: ----------------------------------------------
2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
Do you have any idea what is worong?

Report group and report library does not exist

Dear Guru's
We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
We have to tried to import from client '000' from transaction code GR59, But in that we are not getting 6OBU report group.
Please help us to resolve the issue, as we required this report on priority basis.

Dear Prashant,
Thanks for your reply.
The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
Is ther any other solution to retrieve the library.
Thanks
Varsha

Process group R001 does not exist Error in MSS in Create Requisition Reques

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we haveCreate Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

Hi
Any updates on this
Regards
Karthi D.

Process group R001 does not exist in MSS for Create Requisition Request.

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.

How to handle "The specified resource does not exist" exception while using entity group transactions to purge WADLogs table

Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.

Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

GS004 Set does not exist. PCA account groups

I ran transaction KE5B to copy the financial statement version to PCA account groups. I did not use a suffix or prefix.
The result was an account group has been created in profit center accounting (classic G/L). I can see this account group in transaction KDH3 and I can even change and save it in KDH2. Now when I run a list oriented report from the menu tree (report group 8A26) and I select this account group, the system reports the error GS004 Set does not exist.
The funny thing is when I run an interactive report in PCA and I select the same account group, I don't get this error message and the reports just run.
Please help me out, I need to run these list oriented reports.
BR, Edwin

Hi,
How was everything going on? Have you create a run as account and distribute it to specific computers that being monitored?
Please through the below blog to build your runas account:
Configuring Run As Accounts and Profiles in OpsMgr – A SQL Management Pack Example
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
In addtion, here is a similar thread for your reference:
Run As Account does not exist on the target system or does not have enough permissions
http://social.technet.microsoft.com/Forums/en-US/b3c90ac5-c932-4b13-a5a9-e6991f09e60e/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

Standard SAP report group 6PP3 does not exist

A user is attempting to run the transaction S_ALR_87013544 and receives the error "program 6PP3 does not exist". I used gr53 to display report groups it is not in the list.
I cannot generate 6PP3 either. I cannot create 6PP3 because it is a standard report group
Any ideas?

1.   Use GR59 IN THE <TRG> client
     a. 300 in this case
     b.     SOURCE client = 000
     c.     Leave all fields blank hit EXECUTE
     d.     Select the report group to generate from the list
        i. BPP3
       ii. Select the CONFIRM button

Error : Query does not exist in user group

Hello,
I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
Also i created the new Infoset and Query in an existing User group.
I also assigned the Infoset to user group and query to Infoset.
But while running the new transaction it is giving me error that 'Query does not exist in user group'.
Kindly help me with this.
Thanks in advanced.
Regards,
Darshana

Hi,
After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
Note: The query can only be generated when the InfoSet is assigned to a user group.
Also check whether the usergroup is given or not for queries.
SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

Group does not exist

Hi!
I´m in a upgrade from version 4.6C to 6.0, and i'm checking the bases of costing sheet because i can´t calculate overhead. The group of cost elements appears in the selection list, but when i want to assign it the system says: "group does not exist"!!! but this is not true, it exists in the system.
Somebody helps me pls?
Thanks,
Catalina

Hi Catalina,
I can't say much without seeing the error. However, you may note down the error number and search the sap notes. If possible, give the error number on this forum also. Thanks,
Vishal.

Error - Account group does not exist, check classification assignment

Hi Guys,
I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
Bdoc Error - Account group does not exist, check classification assignment
i have completed all the required configuration as below
Setup of no range for BP and assigned to grouping
PIDE settings in R3
Setup if account identification profile in IS solutions
Thanks,
Nitin

Nitin,
Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

AP Group VLAN "Feelgood" does not exists on controller.

Similar Messages

Maybe you are looking for