CIN RG1 upadtion issue

Hi Experts ,
Need your help on the below issue ,
I have manufactured the material  take inside through 101 (RMA) and i extract RG1 in J2I5 and J2I6 print
it is comming correctly i.e
1st line Qty manufactured    closing balance
               25                               25
now same day i selling the material to one of the customer now when i am extracting i.e IDH , the IDH goes TOP
i.e
1st line Removal from factory                           closing stock
              25                                                            -25
2nd line Opening stock               Qty manufactured          closing balance
                 -25                                      25                                 0
What could be the reason for this.
Regards
PD

Hi raghu,
I dont find any possibility of updating RG1 at background.
As this will be updated when u make manually update once RG material will be posted.You can update RG1 weekly or monthly basis.
Thanks,
PM

Similar Messages

  • RG1 Simulation issue

    Dear All,
    While updating RG1 register, I selected the line items to update and click on "Simulate" button, traffice light turned to "Red".
    Actually, mine is a Stock Transport Order. I have created a delivery based on a P.O and a Proforma invoice based on the delivery.
    After that, I am receiving the material in the receiving plant based on "Outgoing delivery".
    I checked everything, everything is fine. What may be the issue here.
    Regards,
    Mullairaja

    hi
    The process
    Receiving plant raises the PO ME21N
    Supplying plant creates the delivery in VL10B
    VL02n do the PGI asn save the delivery.
    With reference to delivery create the proforma invoice JEX in VF01.
    sUPPLYING PLANT CREATES THE EXCISE INVOICE WITH REFERENCE TO PROFORMA INVOICE IN j1IIN.
    In supplying plant we have to update the rg1 register
    Receivng plant captures the goods receipt in MIGO and also excise invoice
    regards
    SAP SD
    Edited by: sapkpit_sd on Jul 20, 2010 9:25 AM

  • RG1 related issue

    Hello,
    Can some one please hepl me to understand how the opening & closing balances are tallied each day in case RG1 & RG1SUM.
    For eg :
    If closing balance of today is 120 number then the opening balance of the next day should be 120 only. But in our case the tally differs can some one guide me in understanding the logic for tallying the closing balance of earlier day &  opening balance of the next day.
    I find that difference in quantity is due to 321 movement transactions. Do we have to consider 321 movement type for production of RG1 we feel it is duplication of movement type 101 & 131.
    Please feel free to contact.
    Thanks & Regards,
    Nitesh

    Hi Amitesh ,
    You can edit tables J_1irg1 and J_2IRG1BAL.
    But before you go for that ,I would suggest that you can check with business team in logistics regarding the Rg1 balances in phyiscal register they are maintaining.
    Check for the FG inventory .
    Also check for the excise invoice number and billing document number  in SAP .
    I hope that is all done thru SAP.
    whenever you create an excise invoice ,value updating is created which is completed by qunatity updating at the time you run J1I5 and J2I5.
    so better way is to get first the Correct balance figures for inventory and RG1 in books  ,and then u can update J_2IRG11bal  first.
    Its like cutover activity  while going live , same activity u can repeat if there are no other issues.check with accounts/finance  as well.
    Summary table (J_1IRGsum) is just for checking input and output flow from Rg1.  System checks whether you ahve input qty in RG1SUM  greater than outbound  , so once you update any input flow for qty in FG through RMA classification you can  dispatch material without any error.
    For Rg1 table you can edit  it once u get all the details.
    Pl contact  SAP ,they will provide u the edit key for tables.
    You need to set up Rg1 serial . but you may not get all the material documents updated in RG1.
    also as u mentioned ,new materials are not getting updated ,that means users are not following correct process of updating J1ID .
    so either u can write a code with abaper to update J1ID automatically once new material is created.
    and u can also check the maintenance of master data through sales order user exit ,sothat sales order will not get saved untill excise masters are present for   materials.
    this willl avoid any future issues.
    Use the available options with maximum cautiion and provide right training to users apart from the enhancement I suggested.
    Pl revert  for any clarification
    I hope this helps
    Regards
    Mandar

  • Cin Number range issue.(capturing Excise Invoice)

    Hi guys
    I created sales cycle and after i am creating excise invoice thru tcode-j1iin
    When i enter excise group and series group and after saving it.. it is showing error message that internal number range for J_1IINTNUM
    I have maintained number range for this in tcode-j1i9..
    and i assigned this number range to billing typejexexcise invoice.
    even though error come.
    Help in this issue
    Here the error message:
    Error in allocating internal document number Interval not found Number object J_1IINTNUM

    Hi!
    Kindly check the number range maintained is as Follows ??
    No.           Year         From Number           To Number
    01     2008     0001000000     0001099999
    CIN only takes No 01, it does not recognises any other no.
    Moreover the number range should never be maintained as External Numberr range.
    Check the same and let us have the feedback.
    Regards,
    Dnyandeo H. Ainarkar

  • RG1 Print Issue

    Dear Fnds,
    Iam facing with 2 quires ,
    1) while iam doing RG1 Print ...System is not supporting to Print the Form....
    System will give a pop-up wherein give the appropriate file name and path for the same and click on save to save the excel file i heard this option will be available for this what is the Setting.
    2)In RG1 form what is the Opening balance?
    Thanks in Advance
    Regards
    raj.

    hi
    goto J2I6 enter
    Excise group
    Start date
    End date
    and select excel form
    For RG1 updation and initial upload get the oss note 951955
    2) IF there is any closing balance on 31-03-2009 then it will be the opening balance for 01-04-2009
    if it is for the first time i think u have to maintain it in J_2IRG1BAL
    regards

  • CIN-RG1-J1i5 Error

    Hi Friends,
    I am trying to update the material document in J1I5 t-code but it is throwing error traffic light.
    previously i had the same issue but i found that balnce is less in J_2irg1bal table. but now we have 4000 PC in in this table but i am just trying to update 84 PC only in J1i5.Why?
    Please help what will be the settings to be done.
    Thanks,
    Ravi.M

    i found that J_1irgsum table has less quantity compare to updating  quantity. how to update this table.
    but J_2irg1bal table has accurate opening and closing balnce.
    Please suggest.
    Thanks,
    Ravi.M

  • Rg1 print problem

    HI
    SAP script layout not maintained for company code 1300 - register RG1
         Message no. 8I635
    Diagnosis
         You have not maintained the SAP script layout for printing the register
         in CIN customizing.
    System Response
         The system is unable to determine the report layout for printing the
         register.
    Procedure
         Please maintain the relevant SAP script layout for the register in CIN
         Customizing -> India Localisation -> Reports.

    Dear Rithvika
    Go to IMG path -- Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Excise Registers --> Specify SAP Script Forms.
    There maintain as follows:-
    CCode::::Reg.name::::::::::::Lay.num:::::::Form:::::::::::::::Lay.desc.::::::::::::::::::::::::::No.copies
    1000:::RG1  RG1 Register:::::::1::::::::J_2I_RG1:::PERSONAL LEDGER ACCOUNT::::::::1
    1000:::RG1 Recpts/Issues:::::::1::::::::J_2I_RG1:::PERSONAL LEDGER ACCOUNT:::::::::1
    thanks
    G. Lakshmipathi

  • STO Duty Paid

    D/ Friends,
    Ouru2019s is an excisable product. Now we want to do STO from plant to depot. What is the std. process flow of STO in case of Duty paid depots? Pls explain the flow of T.Codes also. Weu2019ve configured CIN.
    Second issue is that std. billing type JEX is not picking the STO Pricing Procedure. We want to transfer the goods to the depot at some price & excise. So how to bring STO Pricing Procedure in the billing doc.
    Thanks.

    Hi,
    Please find the following process
    ME21N-Purchase order STO
    VL10B - Replenishment delivery
    VL02N - PGI
    VF01- Proforma invoice
    J1IIN - Excise invoice
    MIGO - Goods Receipt
    J1IG - Excise Capture
    VA01 - sale order
    VL01N - OBD
    J1IJ - Excise invoice
    VF01 - commercial invoice.
    J1IDEPOTSTOCK - RG23D Report.
    Returns from Customer to Depot
    1) Create a Depot return sales order in VA01 with reference to original billing document
    2) Create Delivery
    3) Create Transfer Posting using MB1B with Movement type 453 and dont forget to make a note of the material document number
    4) Go to J1IG, click "Capture". There enter material document number and the respective series group. Then click "details". Now select the line and click "More documents". Maintain the excise invoice number created at supplying plant.
    Returns from Depot to supplying plant
    1) Go to J1IG and click on red icon from the toolbar. Enter material document number created during MIGO, year,series group of Depot and hit Enter button. Now click on "Item" so that you will be taken to next screen where you can see line item for RG23D cancellation. Save so that system prompts you asking whether you want to cancel the entry. Click YES.
    2) Verify this by going to tables J_1IEXCHDR & J_1RG23D. Check GRPO entry in both the tables where the status must have changed to "D"
    3) The original excise invoice can be canceled via J1IH and check whether DLFC entry has the status "R" and at this time entry CEIV is also created confirming excise invoice and CENVAT reversal.
    Hope this may clears your issue,
    Thanks and Best Regards,
    Muralidharan S

  • Credit Updation in FD33

    Hi
    Can any one help me regarding Credit expousre upadtion issue.
    We have custmised incoming payment for customer which update the customer credit in FD33
    The scrolled amount is reflecting in FBL5 & FD10N,but it is not update the FD33
    Currently it is not updating, which we are not able to identify.
    For the time being we are running the Credit reset progarmm.(RFDKLI20)
    Please help on urgent basis

    Hi,
    You can go and check in FD32 in change mode the credit limit is maintained or not.
    If you maintained also if you didn't save it it won't work.
    In FD 33 give the HOrizon date and in FD32 you can check the
    Current credit limit and maximum permitted  credit limits in that particular customer.
    Accordingly u can maintain.
    Than it will work. No need to do VKM1 always if you maintain.
    If it is useful reward points.
    Regards,
    Srinivasa Reddy

  • Number range maintenance for Excise group - J_1IRG1

    Dear SAP gurus,
    When I am creating number ranges for object - J_1IRG1, i am not finding the excise group for which i want to assign the number range.
    But, when I am processing RG1 update  through J1I5, I can see my excise group for which i can update RG1. Issue comes when I select the material documents and try to process, system asks to maintain number ranges for J_1IRG1 object.
    Can anyone please suggest how to resolve this issue..
    Thanks & regards,
    Praveen.

    Thanks Bala,
    I am getting problem in testing client.
    The suggestion you specified to be initiated from Development client and in development client...I have the excise group entry which i require. I am getting this error only in quality client.
    I hope...the table J_1INEXCGRP is generated through customizing wizhard...It would be better if I could get some information related to customizing activity and the same can be transported to quality client.
    If I go through SE12 and create new entries in the table.....this will be done through ABAP route.
    Can you through some light on customizing activity...?
    regards,
    Praveen.

  • Sound Power Measurement with 4472

    Is onboard DSP a must for any Sound Power Measurement?
    I know that NI-Sound Power Plus works only with 455x.
    Is it simply because NI has not yet written a software for Sound Power Measurement using 4472 or is it technically NOT possibly to do Sound Power Measurment using 4472?
    Gurdas Singh
    PhD. Candidate | Civil Engineering | NCSU.edu

    1. The 6036E is a "sweet" card for high-speed, high-accuracy DAQ on the PCMCIA bus. Even at 10-times oversampling you can achieve 15-20 kHz of response with nice line resolution in the FFT. My experience with the PCMCIA bus has shown a wild variation in DAQ bandwidth (IBM/Compaq...the PITS -- Dell...the best ; and , no I do not work for Dell). For signal conditioning, I use SCXI (so I can not comment on the use of the other components). If you can live with interchannel skew, the set up looks quite promising. Our DAQ requirements demand the use of simultaneous sample-and-hold (SCXI 1140) for either two-channel hot-film measurements or multiple sound pressure measurements with precise cross-correlation (to eliminate wave reflections and e
    chos within the test article). Our microphones were developed by NASA for use in VERY HIGH temperature environments, so our signal conditioning ahead of the 1140 is made from custom devices.
    2. It is important to note that any toolkit add-on to LabVIEW "could" be written by the end user using the very same subVIs distributed with the Full Development System. Sound power is merely a term used to describe a particular mathematical method involved in transforming the acquired sound data from the real domain to the frequency domain. The mathematical methods have been used for many decades. I use my own custom code originally developed in FORTRAN, converted to C++, and now embedded in a code interface node (CIN). The issue to resolve comes down to a) do you have the in-house capability to write and support detailed code development, or, b) do you purchase the toolkits and thereby achieve the capability very quickly. Although the toolkits are expensive, the burdened cost of, say, 1
    additional highly-skilled employee could cost 20 times as much.

  • RG1 updation for Reversal of Goods Issue

    Hi,
    I am a SD person . We recently started RG1 for our client by deleting all the previous data from J_2IRG1BAL table & also mantaining the initial balances for finished goods .
    When we do a goods reversal for a cancelled sales order ( say movement type 602 against 601 for goods issue ), according to standard SAP, the reversal entry  shows up in ROP ( Other Receiepts).
    What the client is demanding that , the Goods reversal entry should show should show up in the Issue Column Only ( like IDE or IDH), with a negative sign ... so it cancels out .
    Client is saying that if it is in different columns, then the excise authorities will create a problem .
    How does it work for others. Is the format of RG1 specified bu indian excise authorities only ? have the excise authorities imposed some regulations on that
    Thanks in advance
    Anmol

    For return /reversal using MB1a - please follow the steps-
    MB1A- then enter movt type 262, plant & SLOC & then press enter instead of to order
    & then one scrren will come where you will enter the mat no , qty & order no & save.
    Earlier when you are trying to fetch the data with reference to order that message - no selectable item was coming
    shakti
    Edited by: SHAKTI BEHERA on Jan 19, 2012 8:22 AM

  • Issue with the upadted database Schema in ODI 11g ?

    Hi ,
      I am new to ODI ..  and i am using ODI 11g .
    the problem which i am facing is below stated :
    I have an existing interface with both source and target tables its working fine . when there is change in the column in the source and the target table i do the reversed enginnner to get the new colums in the source nad the target schema .
    I tried to retain the existing mapping  of source and traget by deleting the source schema and replacing it with the newly updated schema  in the source colum in the interface .
    and  drag and drop the the newly updated schema In the target colum in this way i was able to retain the existing mapping ,and did the mapping for the new columns in both .
    The problem is that it is running succesful and data for the earlier existing mapping are moving from source to target but not for the newly mapped column .
    please help me out in sorting out this issue 
    the knowlede modules that i am using it are as follows
    For LKM  i am using LKM SQL to SQL
    For CKM  - CKM SQL
    FOR IKM -IKM SQL Incremental Update

    Thanks for the suggestion .i am working with Interface . i implemented that and got the colums without deleting anything ,but when  i am mapping the newly upadted colums i am getting an error while executing the Interface .
    ODI-1228: Task TARGET_1 (Control) fails on the target  connection odipoc.
    Caused By: java.sql.SQLSyntaxErrorException: ORA-00904: "COUNTRY": invalid identifier
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
    at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
    at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
    at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
    at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)

  • CIN -  Monthly Excise Duty Debit issue

    Dear SAP SD Guy.
    I have one issue while debiting monthly excise duty from RG23A part II. Details given is as under.
    I have selected T. Code J1IH -  select other adjustment  -  put doc. no and comapny code, plant excise group - select RG23A part II  -   then enter -
    go to next page put duty amount such as Rs 10000.00 -  select header - enter  then   select G/L account which is giving correct G/L account at both line and then save ( Here once save it should save and give jv and account no with sr no of RG 23 A part II)
    But once save again pop up appearing with PLA G/L account no in first line and in the second line modvat clearing G/L account no. ( Actually it should not appear. How this is appearing where is the configuration setting?)
    Once save duty is debited from PLA whereas we have selected RG23A part II once use other adjustment and put details because of second pop up of PLA.
    Can anybody help me how this second POP Up -  PLA G/L account apearing in the system? where is the setting configured or any debugging is required?
    Please seek your early solution and give reward points for early solutions.

    First you will have to update all your registers i.e RG1,RG23A& RG23C part I. using transaction J1I5,
    Then use the J2I5  extract registers to update the value in RG23A & RG23C part II
    J2IUN  transaction for monthly utilization.
    U will see excise payable against which you will see bakances in different registers you can select the register from which you have to utilize the exice duty.
    I think you can now utilize the credit taken.
    Reward If useful.
    Regards

  • Enough RG1 balance is not available to issue the Goods

    Hi All
    I am getting this error when I run "India - Excise Invoice Generation" Request by entering the Delivery Id. The Log file of the request showing this error ORA-20199: Enough RG1 Balance is not available to issue the Goods. But when I check the on hand quantity exists. Quantity is available even after reservation and shipping is done.
    Can anyone please tell me the reason and resolution if you had faced this error before.
    Thanks in Advance
    Prem.

    Process steps are as below .
    Material master with base unit "SHT-Sheet" and maintained alternative unit "M2- Square Meter" along with conversion factor 4930 M2 = 100 SHT. Incoming quantity inspection type (01) is also active on the material.
    Purchase Order quantity in alternative UnM like 1500 M2.
    Purchasing Info Record maintained with alternative pricing Unit “M2”.
    Good Receipt Quantity posted in the alternative Unit of Measure with 1500 M2.
    Usage decision recorded with Base unit Quantity 30.426 SHTs
    Error - PU GR blocked stock exceeded by 0.002 SHTs : 2847 1000 M7 22
    Cause of error which i observed is below.
    On usage decision, system calculating stock posting quantity "30.426" / Conversion factor "( 100 / 4930 )" = 1500.002 and this quantity "1500.002" exceeded from block stock quantity 1500 as posted at the time of GR in the block stock via 103 mvt.

Maybe you are looking for