Cineware: Impossible d'exécuter le script à la ligne 1. Constante de chaîne non terminée

Bonjour,
Je suis sur Windows 7 64bits, 64 gb de ram, GTX780ti, bi processeurs xeon 8 core, avec la version After effects CC 12.2.1.5. Lorsque j'importe un simple fichier Cinema 4D lite avec un cube en rotation j'ai ce message d'erreur:" Impossible d'exécuter le script à la ligne 1. Constante de chaîne non terminée". Et là impossible de lire mon fichier C4D.
J'ai désinstallé et réinstaller After Effects mais cela ne change rien.
Quelqu'un pourrait-il m'aider ?

Since you are French, I wouold suspect you have used a specific character to name your file or the objects in them and it throws off things. Some sort of bug, no doubt...
Mylenium

Similar Messages

In Scripts Variable window and constant wind difference?

In Scripts Variable window and constant window difference?pls help me

Hi
VAR - Window with variable contents. The text can vary on each page in which the window is positioned. Variable windows are formatted for each page.
CONST - Window with constant contents which is only formatted once.
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
Edited by: Jyothsna M on Feb 20, 2008 7:48 AM

Keep getting a dialog box that say that a script on this page is either missing or non-responsive, and this slows everything down.

This only happens when online using Firefox. And seems to happen more often when transferring a document or picture to my Document file. By the way, I am using Windows XP. I have tried a fix called Script Stop, but the problem persists.
Aside from going back to Explorer, is there anything I can do?

Please first check out [What causes an unresponsive script waring http://mzl.la/LOwPvg]
Please post back with your results, it could help other users too! Thank you !

Powershell script to get the domain admin list from non domian member server

hello Script guys!
I am new of the powershell scripting.
currently I am working on autometion project , we would like generate a privilege report for our existing servers.
in our environment, there are many seprated domain , we would like generate the report from one server instead to login each server to check , could you provide some guide on how can we get the specific domain admin list for each domain from a non domain
membership server by using the powershell script? many thanks for your help.

You could remote to the domain controller or use ADSI to query the domain.
Look inth eGallery as ther eare many scripts there tha will return group membership using ADSI.
¯\_(ツ)_/¯

ACE# sh script code - Error: Called API is invalid or non-existant

What is this ??
ACE# dir disk0:
2846 Jun 14 2010 15:40:33 NORDICID_PROBE
ACE# sh script code NORDICID_PROBE
Error: Called API is invalid or non-existant
Hardware is ACE-4710-K9 and software A3(2.7)
The probe itself is functioning ok according to show probe detail.
However show script script_name probe_name -counters all remain at zero for some reason. This wasn't the case on the previously use ACE software.
To my recollection the command show script code has worked successfully before on the same ACE software. Not 100% sure though, but it definitely worked on the previous software we ran on the ACE.

Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel

Selecting and Printing Labels from Database

I have tried to print address labels from a database in which I chose four lines, one of which (a company name) is often blank because there is no information. This line appears as a blank line on the label. Is there a way to eliminate this blank line?
I am also having trouble selecting records to print. Can you suggest where to look to get help?
Thank you.

Hello
Here is a script I passed last year about this kind of problem.
I hope that embedded comments would be sufficient because at this time, I am unable to work on such a script.
--[SCRIPT DB calcToSlideGUI v6]
Ce script récupère dans un champ une valeur calculée
et la dépose dans un champ texte classique.
Cela permet de bénéficier du retour à la ligne automatique
indisponible pour les champs calculés.
Si un champ contient des pseudo returns consécutifs,
ils sont remplacés par un unique pseudo return.
Si un champ contient des pseudo espaces consécutifs,
ils sont remplacés par un unique espace.
La fonction Chercher-Remplacer est utilisée
pour remplacer ces pseudo return par de VRAIS return.
Exemple de formule pour concat-calc
'prénom'&"◊"&'prénom2'&"◊"'nom'&"¶"&'rue1'&"¶"&'rue2'&"¶"&'code'&" "&'city
• This script grab the value calculated in a field
and drop it in a simple text field.
This permit to take benefit of the auto wrap feature
which is unavailable with calculated fields.
If a field contains adjacent pseudo returns,
they are replaced by single ones.
If a field contains adjacent pseudo spaces,
they are replaced by a single space.
The Find-Replace feature is used to replace
these pseudo returns by TRUE ones.
Sample formula for concat-calc:
'firstName'&"◊"&'firstName2'&"◊"&'lastName'&"¶"&'street1'&"¶"&'street2'&"¶"&'co de'&" "&'city'
Yvan KOENIG, Vallauris (FRANCE)
27 août 2004
complété le 31 août
modifié le 5 décembre
modifié le 8 décembre
modifié le 4 février 2005
property champsRequis : {"concat-calc", "concat-text"}
(* les noms des deux rubriques manipulées
vous pouvez modifier ces noms mais PAS leur ordre
• the names of the two used fields
you may change them but don’t change the order of them *)
property french : true (* true = messages français
• false = english messages *)
property fauxReturn : ASCII character 166 -- "¶"
(* use it in the database formula as Return indicator *)
property fauxEspace : ASCII character 215 -- "◊"
(* use it in the database formula as Space indicator *)
property fauxReturn2 : fauxReturn & fauxReturn
property fauxEspace2 : fauxEspace & fauxEspace
property msg0 : "" -- globale
property msg1 : "" -- globale
property msg2 : "" -- globale
property msg4 : "" -- globale
property msg6 : "" -- globale
property msg7 : "" -- globale
property msg71 : "" -- globale
property msg72 : "" -- globale
property msg81 : "" -- globale
property msg82 : "" -- globale
property msg98 : "" -- globale
property msg99 : "" -- globale
on run
try
if msg0 is "" then my prepareMessages()
my controlesDivers()
my modeUtilisation()
my afficheToutes()
my preparation()
set metsReturn to my alimente()
my pourRemplacer(metsReturn)
on error MsgErr number NroErr
if NroErr is not -128 then
beep 2
(* «constant afdregfp» est la forme canonique de frontmost application *)
-- tell application (path to «constant afdregfp» as string)
tell application (path to frontmost application as string)
display dialog "" & NroErr & " : " & MsgErr ¬
buttons {msg99} with icon 0
end tell -- to application
end if
return
end try
end run
-- ================== routines
on controlesDivers()
tell application "AppleWorks 6"
activate
-- Test version
if "6." is not in (version as text) then ¬
error msg0 number 8000
if (count each document) = 0 then ¬
error msg1 number 8001
if (document kind of document 1 ¬
is not database document) then ¬
error msg2 number 8002
select document 1 (* Utile si dialog recherche est au 1er plan
• Useful if the Search dialog is at front *)
end tell -- AppleWorks
end controlesDivers
-- ==================
on modeUtilisation()
tell application "AppleWorks 6"
tell document 1
select menu item 1 of menu 5 (* mode Utilisation¬
• Browse mode *)
end tell -- to document 1
end tell -- to AppleWorks
end modeUtilisation
-- ==================
on afficheToutes()
tell application "AppleWorks 6"
tell document 1
select menu item 1 of menu 6 (* Afficher toutes les fiches
• Show all records *)
end tell -- to document 1
end tell -- to AppleWorks
end afficheToutes
-- =====================
on preparation()
tell application "AppleWorks 6"
tell document 1
if (count of records) = 0 then error msg6 number 8006
set nomsChamps to name of every field
set {missing, msg8} to {0, ""}
set cnt_champsRequis to count of champsRequis
repeat with ky from 1 to cnt_champsRequis
set Rbrq to (item ky of champsRequis)
if Rbrq is not in nomsChamps then
set missing to missing + 1
set msg8 to msg8 & Rbrq & ", "
(* construit une chaîne avec les noms des rubriques absentes
• build a string with the names of missing field(s) *)
end if
end repeat
if missing is not 0 then
(* prépare un beau message d'erreur
• build a pretty error message *)
if missing = 1 then
set msgmiss to msg7 & msg71 & return & ¬
msg8 & msg81
else
set msgmiss to msg7 & msg72 & return & ¬
msg8 & msg82 -- pluriels
end if -- missing = 1
error msgmiss number 8078
end if -- missing is not 0
end tell -- to document 1
end tell -- to AppleWorks
end preparation
-- =====================
on alimente()
tell application "AppleWorks 6"
tell document 1
set {champSource, champDestination} to champsRequis
set metsReturn to false
set nbrec to count of records
repeat with ky from 1 to nbrec
set {champky, mets_Return} to ¬
my slide((value of field champSource of record ky) as text, metsReturn)
set value of field champDestination of record ky to champky
end repeat
end tell -- document 1
end tell -- Aworks
return mets_Return
end alimente
-- =====================
on remplace(Texte, avant, apres)
set AppleScript's text item delimiters to avant
set aListe to (text items of Texte)
set AppleScript's text item delimiters to apres
return (aListe as text)
end remplace
-- =====================
on slide(Texte, mets_Return)
repeat while Texte contains fauxReturn2
set Texte to my remplace(Texte, fauxReturn2, fauxReturn)
end repeat
repeat while Texte contains fauxEspace2
set Texte to my remplace(Texte, fauxEspace2, fauxEspace)
end repeat
if Texte contains fauxEspace then ¬
set Texte to my remplace(Texte, fauxEspace, " ")
set AppleScript's text item delimiters to ""
if Texte contains fauxReturn then set mets_Return to true
return {Texte, mets_Return}
end slide
-- =====================
on pourRemplacer(metsReturn)
if my quelOS() is not less than "1030" then
(* Mac OS X 10.3 ou plus *)
if metsReturn is true then ¬
my chercheRemplaceGUI(fauxReturn, return)
else
error msg4 number 8004
end if -- my quelOS() (GUIdispo)
end pourRemplacer
-- ==================
on chercheRemplaceGUI(avant_, apres_)
beep 2 (* Attire l'attention *)
tell application "AppleWorks 6"
--activate
select document 1
tell document 1
select menu item 1 of menu item 16 of menu 3 (* Rechercher/Remplacer…
• Find/Replace… *)
end tell
set the clipboard to avant_
paste
end tell -- to AppleWorks
tell application "System Events"
if UI elements enabled then
tell process "AppleWorks 6"
keystroke tab
end tell -- to process
else
tell application "System Preferences"
activate
set current pane to ¬
pane "com.apple.preference.universalaccess"
display dialog msg98
end tell -- to System Preferences
end if
end tell -- to System Events
tell application "AppleWorks 6"
set the clipboard to apres_
paste
end tell
tell application "System Events"
tell process "AppleWorks 6"
keystroke tab -- back to field "Search"
end tell -- to process
end tell -- to System Events
end chercheRemplaceGUI
-- =====================
on quelOS()
try
(* «event fndrgstl» = forme canonique de system attribute *)
-- set hexData to «event fndrgstl» "sysv"
set hexData to system attribute "sysv"
set hexString to {}
repeat 4 times
set hexString to ((hexData mod 16) as string) & hexString
set hexData to hexData div 16
end repeat
set OS_version to hexString as string
on error
set OS_version to "0000"
(* retournera "0000" si "system attribute" n'est pas reconnu *)
end try
return OS_version
end quelOS
-- =====================
on prepareMessages()
if french is true then
set msg0 to "Ce script n'est pas compatible" & return & ¬
"avec cette version d‘AppleWorks." & return & ¬
"Veuillez utiliser une version 6.0" & return & ¬
"ou plus récente..."
set msg1 to "Aucun document ouvert"
set msg2 to "Ce document n'est pas une base de données."
set msg4 to "Pensez à remplacer" & return & ¬
"«" & fauxReturn & "» par «\\p»."
set msg6 to "Impossible d’exécuter ce script" & return & ¬
"sur une base vide."
set msg7 to "Désolé, "
set msg71 to "la rubrique:"
set msg72 to "les rubriques:"
set msg81 to "est absente."
set msg82 to "sont absentes."
set msg98 to "Le scriptage des éléments d’interface est désactivé. " & ¬
"Cochez «Activez l’accès pour les périphériques d’aide»"
set msg99 to " Vu "
else
set msg0 to "This script is not compatible" & return & ¬
"with this version of AppleWorks." & return & ¬
"Please use version 6.0" & return & "or higher..."
set msg1 to "No open doc"
set msg2 to "This document is not a database."
set msg4 to "CAUTION, don’t forget to replace" & ¬
"“" & fauxReturn & "” by “\\p."
set msg6 to "Can’t apply this script" & return & ¬
"on an empty DB."
set msg7 to "Oops, the field"
set msg71 to ":"
set msg72 to "s:"
set msg81 to "is missing."
set msg82 to "are missing."
set msg98 to "UI element scripting is not enabled. " & ¬
"Check “Enable access for assistive devices”"
set msg99 to " Oops "
end if
end prepareMessages
--[/SCRIPT]
Yvan KOENIG (from FRANCE jeudi 15 juin 2006 09:07:25)

Text Messaging in Japanese (or other language with non-Roman script)

Is it possible to send/receive text messages written in non-Roman characters with Verizon?
More specifically, I'm using a Droid 2 with Verizon, and I'm trying to text a friend in Japanese. She has an iPhone (AT&T), and is physically in the U.S. (so I'm not asking about international text messaging). I've already installed apps on my Droid (e.g. OpenWNN, or Simeji) to input Japanese, which work fine in and of themselves, and the Droid of course displays Japanese text or other languages just fine on the Browser or in E-mails.
However, I'm having lots of trouble with Text Messaging. When I send a message containing Japanese text (typed in perfectly fine with OpenWNN or whatever), she either never gets the message, or the text comes out unreadable (as ???????). Messages with a mix of Roman and non-Roman characters typically show the Roman characters ok, but the non-Roman ones (i.e. Japanese) are garbled. If she sends me a message containing any non-Roman characters, I generally don't get the message at all (i.e. not even garbled-- just no message at all). This deficiency seems to be specific to Text Messaging, as far as I can tell. I can send and receive e-mails containing Japanese just fine, read foreign language web pages, and type in Japanese into search boxes on those web pages and so on with the Droid. However, sending an e-mail message to (myphone#)@vtext.com, predictably, results in any Japanese text being garbled, though Roman characters come through just fine.
Is this perhaps something specific to Verizon's network? Or is text messaging in non-Roman scripts just inherently impossible? My friend says she knows others who can successfully text in non-Roman scripts (e.g. Korean Hangul, Japanese Kana or Kanji), and claims some of these folks are Verizon customers too. A search on droidforums.com yielded someone who supposedly could text in Korean within Verizon. So, I'm hoping this is possible, and I'm just missing something. However, this is perhaps all secondhand information and rumor.
(Incidentally, I know for certain that messaging with non-Roman scripts is possible in general. During my last vacation in Japan, I rented a phone there, and could send messages in English or Japanese scripts. However, I believe the phones there actually have their own e-mail addresses, and so the service there is more like regular e-mail-- my understanding is that text messaging as we know it in the U.S. is a distinct technology, though I could well be wrong.)
So, to restate my question: is it possible to text message with non-Roman scripts with Verizon? Has anyone out there done this successfully-- if so what did you do, or what app did you use? Or is it in fact impossible? (e.g. Maybe text messaging here only uses 7 or 8 bits, instead of 14 or 16 needed to encode all the various Asian, European, and other scripts?)
Thanks for any help available.

I'm trying to figure this out as well, but my understanding on the matter is that Verizon's CDMA network uses unicode which will display, roman characters, loa, thai, and serveral other languages, but not hirigana, kanji, katakana, or simplified or traditional chinese. The Romaji should work however. It would be nice to hear some input from a Verizon rep on the subject, because like you my info is all second hand.
If my understanding is correct, the simple answer is no, it's not possible.

4EA3 - ISSUE: run-as-script exits silently, deleting all text from "Script Output"

I have a short-to-medium sized script I've been developing in SQL Developer 4 EA (build MAIN-13.30).
It was going pretty well, then just when I was ready to verify the whole thing start to finish, it started silently aborting, deleting output.
This happened several times with the script. Because output is deleted, I can't tell definitively when it failed.
The log messages include pairs of messages matching the runs:
SEVERE
3088
0
oracle.dbtools.worksheet.commands.scriptrunner.task.executor.DefaultStatementExecutorTask
java.io.PipedInputStream.checkStateForReceive(PipedInputStream.java:261)
SEVERE
3087
10046
oracle.dbtools.raptor.newscriptrunner.ScriptRunnerContext
java.io.PipedInputStream.checkStateForReceive(PipedInputStream.java:261)
I perform a bit of unconventional handling of DEFINE variables and WHENEVER SQLERROR, but these have been in the script during successful runs.
Andrew Wolfe

You haven't provide ANY information about what the script is even trying to do, what database you are working with or what 'output' you are talking about being deleted.
I suggest that you perform more troubleshooting on your own to determine more about the issue that might be involved.
Use the 'binary search' method: cut the script in half and run the first half. If that works add half of the second half of the script (now using 75% of the script) and run that. Maybe 'divide and conquor' will isolate the particular part that is failing.,
If you are using Oracle then execute the script in sql*plus. If it works there but doesn't work in sql developer that provides more info.
Run the script in the latest OFFICIAL version of sql developer. If that works then the problem may be related to the un-released version you are using.
Not much anyone on the forums can do for you unless you post info about what it is you are even doing.
Because output is deleted, I can't tell definitively when it failed
Then you need to be more proactive and add steps to the script that display, print or log each step that is executed. Then it is easy to tell which steps completed and which step failed.

Importation de texte (copier coller) impossible dans photoshop sous mac

je suis passé sur mac et je n'arrive pas à importer du texte dans photoshop (copier coller), ça me marque : Impossible d'exécuter la commande Coller le texte car les données du Presse-papiers sont vides ou incorrectes. Le problème persiste m^me si je copie d'abord le texte sur illustration pour ensuite le copier sur photoshop. Merci pour votre aide !!!

Salut David,
Lorsque j'ai fait l'essai pour vous donner un complément d'info, le texte copié que ce soit d'un fichier texte, mail ou internet est et collé sans problème dans Pshop CC2014 sur Win7 quel que soit son format. Il prend cependant le format choisi pour le texte dans Pshop (Police, couleur, etc..). Il faut donc le reformater.
Benoit à répondu que le problème ne concerne probablement que le iMac et que le problème a été reporté sur Photoshop.com.
J'ai essayé de voir s'il était reporté comme bug mais je dois avouer que j'ai des difficultés à retrouver quoi que ce soit sur leur système de bug repport. C'est à espérer qu'Adobe et Mac s'activent sur le problème.
PS : ce pourrait être intéressant pour récupérer des formatages spécifiques de faire des test sur Acrobat. Je n'ai pas le temps d'approfondir et je n'ai pas réussi sur les quelques tests rapides effectués.
Bonne journée.

Windows NT: 2.2 - 3 upgrade scripts

When will upgrade scripts be available for converting Webdb2.2 to Portal 3.0 on Windows NT.
The FAQ says January. Can you be a bit more specific than that? I need to schedule my effort between multiple clients and some indication would be very useful. I appreciate that things may change. Will the scripts be available this week? The end of the month?

We noticed that the upgrade scripts for Solaris also have the code needed to upgrade NT (i.e. wupgrade.cmd). We tried this, and it seemed to work fine!
While I will not guarantee that it will work for everything (since Oracle has not certified it for this), you could try it. I would suggest you do what we did, which was to move the WebDB instance over to another machine (or at least another instance), and do the upgrade then look at the results to make sure it works before you cut the scripts loose on your production instance.
Ken Atkins
Computer Resource Team (www.crtinc.com)
Check out my Oracle Tip site at:
http://www.arrowsent.com/oratip
null

Executer un Script python avec Teststand pour agir sur un banc de Test

Bonjour à tous,
J'aimerais savoir comment peut-on exécuter un script python avec Teststand sans utiliser le "Call Executable".
Je m'explique: j'aimerais lancer deux script python sur Teststand. Le premier serait un script qui permettrait d'initialiser un modèle sur un banc de test ainsi que l'objet virtuel dans lequel je veux travailler. Dans le deuxième script, j'agirai sur l'objet virtuel. Je voudrais donc lire une variable du modèle sur le deuxième script à l'aide de l'objet virtuel et agir dessus après à l'aide de Teststand.
Lorsque j'utilise le "Call Executable", le deuxième script qui s'exécute ne reconnait pas l'initialisation du modèle du premier script.
Je pensais donc à utiliser Labpython avec labview puis Teststand, est-ce-que cela serait possible?
J'ai en ma possesion :
Labview 2009
Teststand 4.2.1
Python 2.5

Bonjour coconuts,
Merci d'avoir posté votre question sur le forum de National Instruments.
Après quelque recherche j'ai trouvé un tutoriel sur Calling Scripting Languages from NI TestStand.
Vous l'avez peut être déja consulté mais je me permet de vous le renvoyer car il est assez interressant.
http://zone.ni.com/devzone/cda/tut/p/id/8847?metc=nsi9321
Sinon je pense qu'il faudrait peut être créer une variable globale ou partagé pour dialoguer entre les deux Scripts. Essayez de faire plusieurs étapes dans votre manupulation. Utilisez le premier Scripts, enregistrez les données que vous souhaitez dans une variable. Vous réutiliserez celle-ci dans le deuxième script. Mais assurez-vous bien que le premier script à stocké votre objet.
Brice S.
National Instruments France

Folder Action to Launch Perl Script

Hello.
I wrote a perl script which I wanted to execute when a file was dropped into a folder. I added a folder action with a very simple applescript:
on adding folder items to this_folder after receiving added_items
do shell script ¬
("perl /Users/Alexander/Library/Scripts/gte2.pl")
end adding folder items to
The folder action didn't do anything, any thoughts on what I'm doing wrong? Note, the perl script works fine when I run it from the terminal.
thanks.

Thanks Camelot, I appreciate the help. My script below is trying to read data from a file in folder in my system. So I will try your suggestion, I didn't realize the environment and path my be different.
Regards Alex
#!/usr/bin/perl -w
#This program is to convert files from gamin running GPS watch to text file which can be loaded into excel.
# To make executable, remember to set: chmod u+x <file>
#set all the flags. Note the flags are used to stop the matching
$i = 1; $k = 0; $start = "no";
#Open data file and find values
open(DATA,"/Users/Alexander/Alex's Misc/Health/Garmin_Conversion/run.tcx") || die "Couldn't open file*\n";
#read in the data line by line until "end of file"
while (<DATA>){
#start parsing for information to keep
if (/.<Id>./) {
@Idline=split(/>/);
@Idbeat=split(/T/,$Idline[1]);
$Id=$Idbeat[0];
if (/.<Track>./){
$start = "yes";
if ($start eq "yes"){
if (/.<Time>./) {
@timeline=split(/T/);
@timebeat=split(/Z/,$timeline[2]);
$Time[$i]=$timebeat[0];
elsif (/.<LatitudeDegrees>./) {
@HRline=split(/>/);
@HRbeat=split(/</,$HRline[1]);
$Latitude[$i]=$latbeat[0];
elsif (/.<LongitudeDegrees>./) {
@longline=split(/>/);
@longbeat=split(/</,$longline[1]);
$Longitude[$i]=$longbeat[0];
elsif (/.<AltitudeMeters>./) {
@altline=split(/>/);
@altbeat=split(/</,$altline[1]);
$Altitude[$i]=$altbeat[0];
elsif (/.<DistanceMeters>./) {
@distline=split(/>/);
@distbeat=split(/</,$distline[1]);
$Distance[$i]=$distbeat[0];
elsif (/.<Value>./) {
@HRline=split(/>/);
@HRbeat=split(/</,$HRline[1]);
$HR[$i]=$HRbeat[0];
$i++;
} #string matching
} #if start flag is yes
} #while data loop
close (DATA) || die "couldn't close file.\n";
#write all data to file in space delimited format
open (NEWFILE, ">/Users/Alexander/Alex's Misc/Health/Garmin_Converted/$Id run") || die "can't create file.\n";
$Time[0]="Time"; $Latitude[0]="Latitude"; $Longitude[0]="Longitude"; $Altitude[0]="Altitude"; $Distance[0]="Distance"; $HR[0]="HR";
print NEWFILE "0 $Time[0] $Latitude[0] $Longitude[0] $Altitude[0] $Distance[0] $HR[0]\n";
for ($j = 1; $j <= $i; $j++) {
$k=$j+1;
print NEWFILE "$j $Time[$j] $Latitude[$j] $Longitude[$j] $Altitude[$j] $Distance[$j] $HR[$j]\n";
} #for j loop
close (NEWFILE) || die "couldn't close newfile.\n";
#This is the end of the program

Unable to load one script (Iphone revision issue)

Hi,
I'm unable to load one of my scripts through any browser or the desktop app, although I still can through the Iphone app. I believe it stopped working correctly after I made a comment on my Iphone. I was logged in on my comp and tried to make a comment on my phone, it told me I couldn't. I came back maybe five mins later and tried again and this time it seemed to work. I'm guessing this caused a revision issue but I can't open the script to manage revisions. Adobe Story becomes non responsive as it tries to 'open editor' and I have to close it (I don't have to shut it down using task manager). Using Windows 7 64bit and am a creative cloud subscriber.
Thanks, really need access to this script!
Jack

Thanks, it works! Relief!
Yeah, I had it open in the iphone app and the browser. Then made a comment on the Iphone - the app told me I couldn't. I tried it again on the iphone a bit later (thinking the browser version may have locked) and no error message came up this time. However, later on I could no longer open the script in the browser version - or the desktop app. I could still access it on the iphone app and the next day I thought if I made more comments on the iphone it might fix it, by making the iphone app version obviously the newer version, but alas it didn't so I came on here and asked for help

Script won't run in firefox but does in IE, chrome and safari

i have a landing page with a web form script, www.wholewoman.com/newpages/landing/helpforcystocele.html. the script does not show up in firefox. further, none of our videos (served from kaltura (CDN) show up in firefox. nor does the registration script for our drupal forum. the good news is there are a lot of firefox users in the world. the bad news is that none of them can opt into my list, watch my videos or register for my forum. help!

As posted already, your problem has nothing to do with CSP, but with blocking active mixed content.
You can see that there is a shield icon on the left end of the location bar before the "Site Identity Button" (globe/padlock) on the location bar indicating that mixed content is blocked.
*https://support.mozilla.org/kb/how-does-content-isnt-secure-affect-my-safety
*https://developer.mozilla.org/Security/MixedContent
This extension can allow such active mixed content by toggling the security.mixed_content.block_active_content pref.<br />
Note that this is a pref that works globally
*https://addons.mozilla.org/firefox/addon/toggle-mixed-active-content/

Need help placing tracking script on button click

Howdy.
We're trying to track the button clicks on a landing page we're producing. I've got the "landing page" script in the header via the page properties but now I need to put script on a button that fires when the person clicks the button. Any help would be greatly appreciated!
website: maysweb.tamu.edu/open-enrollment
script:
<script type='text/javascript'>
// Conversion Name: Finance & Accounting - Non-Finance Managers button
var ebRand = Math.random()+'';
ebRand = ebRand * 1000000;
//<![CDATA[
document.write('<scr'+'ipt src="HTTP://bs.serving-sys.com/Serving/ActivityServer.bs?cn=as&ActivityID=1&rnd=' + ebRand + '"></scr' + 'ipt>');
//]]>
</script>
<noscript>
<img width="1" height="1" style="border:0" src="HTTP://bs.serving-sys.com/Serving/ActivityServer.bs?cn=as&ActivityID=1&ns=1"/>
</noscript>

Anyone got any ideas on this?

Cineware: Impossible d'exécuter le script à la ligne 1. Constante de chaîne non terminée

Similar Messages

Maybe you are looking for