Cisco connect problems on max

Every time i down load it it say my mac does not have up to date solfware but it does. Is there any way to reset E1000 with out it. I used a friends computer on it and it ask me to put in the 8 number code on the bottom and i did now that com puter is the only one that will work wireless. Please help.

Hi RandolphA, are you trying to reinstall the router using a MAC computer or are you trying to just connect it wirelessly to the network?
If so, the Cisco Connect software does not really run on Mac so what you can do is setup the device manually. You can do that by accessing the setup page through 192.168.1.1. Leave the Username field blank and type "admin"as the password. Go to the wireless tab and setup the wireless settings.
I found this link that may help you, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=2bf7dc19b4a94d03b0fd91f9ce426e8a_Manually_Setting_...

Similar Messages

XE connection problem after using Cisco AnyConnect Client

Hello
I have a rather annoying problem connecting to an XE instance AFTER I have disconnected from a VPN via a Cisco AnyConnect VPN Agent.
Sequence of operations:
- start Oracle XE and work normally
- connect to client's vpn
- do other stuff
- DISCONNECT from Client's VPN
-> unable to connect to XE service any more, unless I reboot
The problem does not happen with other vpn clients like Cisco VPN Service, Juniper, Checkpoint.
Details:
- sqlplus connection WITH service name (eg sqlplus user/pwd@XE): FAILURE with ORA-12170
- but...sqlplus connection WITHOUT service name (eg sqlplus user/pwd): SUCCESS (weird !)
- tnsping XE: TNS-12535 error
- lsnrctl status output (sorry, italian localized)
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-GIU-2011 14:19
:38
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATO del LISTENER
Alias LISTENER
Versione TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Data di inizio 22-GIU-2011 12:26:15
Tempo di attivitÓ 0 giorni 1 ore 53 min. 22 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
Servizio predefinito XE
File di parametri listenerC:\programs\oraclexe\app\oracle\product\10.2.0\server\
network\admin\listener.ora
File di log listener C:\programs\oraclexe\app\oracle\product\10.2.0\server\
network\log\listener.log
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MyPCName)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Summary table dei servizi...
Il servizio "CLRExtProc" ha 1 istanze.
L'istanza "CLRExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
Il servizio "PLSExtProc" ha 1 istanze.
L'istanza "PLSExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
Il servizio "XEXDB" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Il servizio "XE_XPT" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Il servizio "xe" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Environment:
Win7 Pro SP1
Oracle XE 10.2.0
I have stopped the Win firewall and the problem is still there, so it is not a firewall problem
listener.ora configuration
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Any help ?

Hi;
Pelase close this tread as answered and keep update issue at:
Re: XE connection problem after using Cisco AnyConnect Client
Regard
Helios

EA3500 Cisco Connect Setup problem?

So i recently resetted my Linksys EA3500 and i lost the CD so i download the Cisco Connect for the EA3500.I connected my EA3500 using the ethernet cable to my laptop,run the setup,and then on 25% it said that no wireless routers were found.I already connected it using an ethernet cable i dont understand why it is still not found.What should i do?

Hi geraldicg , make sure that the wireless switch on your computer is turned on. I recommend that you try another laptop (if available). If no luck, configure the router manually by accessing 192.168.1.1 or myrouter.local. Check this out:
Title: Accessing your Linksys Smart Wi-Fi Account through a web browser

DMVPN connection problems

I am having a very strange DMVPN connection problem.
I'm in the initial stages of moving from an IPSEC Site-to-Site vpn to a full DMVPN cloud. I currently have only one spoke converted from Site-to-Site to DMVPN.
Site to Hub connection looks like this
1841 -> Internet -> 2821 -> Core switch
From the spoke I can reach most resources off the core switch. However I'm unable to open internet browser connections to internal resources. Previously this site had been a Site-to-Site vpn using the same addressing and connecting through the same equipment. As a Site-to-Site vpn I can connect to all the proper internal network resources, as I can at all the other Site-to-Site vpn locations.
AS soon as I moved to DMVPN I started having connection problems to certain resources.
Once packets from the spoke reach the internal network is their any difference in their content between a DMVPN and a Site-to-Site vpn?

You can read more about it here:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00804247fc.html
I realize the settings I gave you aren't what is recommended in the document. I got those settings from TAC and they work for me. I haven't had a chance to play around with them to try different combinations as it typically breaks things.
The df-bit clear would remove the 'do not fragement' flag from the packet, enabling the router to fragment these packets into smaller sizes so they can get under the max MTU size. You shouldn't need the df-bit clear with the ip tcp adjust-mss command in place.
Transport mode may also help you here. It will reduce header overhead on the packets that are traversing your tunnel.

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

E1200 V2 upgraded to OS 10.8.2, Cisco Connect unsupported OS, also update firmware?

I purchased myu E1200 Jan 2012. Have been intermittent loss of connection & not sure whether it is old cable modem or router or? ISP came out & checked & changed some cable fittings said looked ok, but could be my old modem. (I'm getting ready to move out of area so don't want to buy a new modem now). But also a lot of my neighbors w Cox report intermittent loss of connection.
I will get messages saying I'm not connected to internet. Usually if i go up & turn off wireless & then turn it back on, it will search & find my router. Frequently though I notice that when I check it has switched to my guest rather than primary for some reason.
I was having some of this before I even went to wifi a yr ago.
Just upgraded to Mountain Lion a couple weeks ago or so. Last night computer had a panic. I received advice to make sure all software as well as router firmware up to date. Found & updated MacBookPro Firmware update. Backed up.
Opened CiscoConnect & got message unsupported Operating System.
Reading about upgrading firmware, saw warnings about doing it hard wired or it could permanently damage router. Because of the intermittent connectivity problems & the warning, I think I would be safest to do this manually by downloading it 1st & then updating the firmware from the download.
I see that instructions say to determine Firmware version. & it also says it will ask for router IP address. I'm guessing all that was in Cisco Connect. I know it has my passwords, but now I can't get to it. It also says I can use the web set up page to get the current firmware version. For updates (but it says for pc) it shows 8/2011 & 8/2012. Since mine was purchased in 1/2012 & unless it self updated, I'm guessing it is running the 8/2011 firmware. But just noticed in the User Guide it says that when I run Cisco Connect it checks for updates & installs them. But that's kind of interesting w all the warnings about running it w a wired connection to make sure no interruptions. Not sure how I have it set up, but I usually set software updates to prompt me so I can control when they actually run.
Once I have gotten that, will I be able to manually download the appropriate firmware version? Or if I click on that, will that start a set up or update process?
If I download Cisco Connect, will it update the already installed version, keeping all my existing info? & then will that be compatible w Mountain Lion & then show me whether the firmware needs to be updated?
Kathi

But anyway, I can't even open the old version!!! I just get a message about unsupported OS! So kind of hard to uninstall if I can't open it.
& for some reason when I was installing Mountain Lion, upgrading from Snow Leopard it found an old version of Parallels which I knew was not compatible. Didn't even think about this.
Its sort of working but something is not working very well. I sure wish I hadn't listened to those who said to save the $ & not get the Apple Airport Express. Their stuff works & its not hard to set up like this!
This is SO LAME!!!
& Where is lists the info, I have so far found NO INFO about updating. I usually have my software set to notify me so I control when it updates. & I think the last times I was in Cisco Connect it was under pressure just trying to get the router working again.
Right now I feel like throwing it at something.
Well, I have twice tried to download from the list for my model & when I click on the set up icon I get a message that "Setup" is damaged and can't be opened. You shold eject the disk image." But when I click for more info it says:
The app has been modified or damaged
The app’s code does not match the original code that was signed. The app has been modfied, or it may be broken or corrupted or have been tampered with. If you feel that an app has been damaged or tampered with, you should delete it by dragging it to the Trash.
Some apps and tools, such as AppleScript applications and some legacy tools, modify themselves after signing. These types of apps cannot be opened unless the Gatekeeper settings in the Security & Privacy preferences is set to “Anywhere.”
Open the General pane of Security & Privacy preferences
For more information about protecting your Mac from harmful software, see this help topic:
Protect your Mac from malware
Kathi

Windows 8.1 and Cisco Connect Incompatable

I've upgrades a couple of PC's to Windows 8.1. Upon discovering the printer attached to my E4200 v1 by its USB port was not showing after the upgrade, I re-ran Cisco Connect to re-install the printer.
----At this point I'd like to say up front that the E4200 is running the latest firmware, and I am using the latest Cisco Connect available - albeit 2 years old.-----
Cisco Connect gets as far as the USB Printer connect button before displaying an error page telling me "our customer support can help" and giving a link to a support page that doesn't work. Typical Cisco I fear.......
Digging deeper, the Windows Device Manager is showing the system device SXUPTP driver has been blocked from loading, quote:
"The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver. (Code 48)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
Clicking on "Check for solutions" doesn't find one (typical Microsoft), and letting Windows search for a newer driver doesn't find anything either.
Both PC's, a laptop and a desktop, are the behaving the same - so not a PC issue. Both worked with Windows 8.0.
So what's the story Cisco? We need a Connect update, or at least a fixed driver - when will we see this?
Thnx.

Ok - no thanks to Cisco, I seemed to have found an answer. This is unofficial, do at your own risk. Creating a system restore point first would be sensible.
The clue is the Cisco SXUPTP driver is copyright to Silex. The E4200 must have a Silex chip on board to talk to the USB port, and the SXUPTP driver on the PC is what talks to the chip. I visited the Europe Silex site (the US site is harder to get through - it wants you to know which Silex chip you've got as a starting point) at:
http://www.silexeurope.com/en/home/support/productgroups/common-downloads/
I downloaded SX-Virtual Link 3.12.0 dated 29.05.2013 (05/29/2013 in US speak). This downloaded a zip file called s-33a3120a.zip. I unzipped the contents and ran Cosetup.exe to install. After a restart I now have a functioning SXUPTP driver 3.7.1.0. (Forget what the original Cisco one was - 3.5.0.0?)
Ran Cisco Connect again, and all proceeded as normal. Printer re-installed.
The Silex setup program also installs a piece of software called SX Virtual Link, which seems to offer some low level control over the link to the E4200 USB port. I haven't had a play with this.
So why did I have to hack my way through this? Why didn't Cisco post Windows 8 updates BEFORE it was released, let alone 8.1? NOT impressed.

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

Mountain Lion 10.8.4-Cisco Connect-shutdowns kernel panic error-EA6500

I have:
- Mac Mountain Lion OS X 10.8.4
- EA6500 with the latests updates (firmware..) all downloaded from Linksys web
When I install Cisco Connect to setup a USB printer, the software has some kind of conflict with OS X 10.8.4 and the system has unexpected & repentine shutdowns with a restart shutdown panic error report.
If I unistall Cisco Connect the problem doesn´t happen again
After checking all available guides and software, there is no way to solve the issue. I also chat with Linksys support and they have no idea how solve it.
It is for sure a problem of Cisco Connect software compatibility with OS X 10.8.4.
Please, some solution from Linksys or a workaround with Mac terminal commands?
DON´T INSTALL CISCO CONNECT SOFTWARE TILL ISSUE SOLVED!!

Cisco Connect would not work with a router using a Linksys Smart Wifi firmware. Also, VUSB is not going to work with MAC OS 10.8 yet. Hopefully Linksys would release an update that would support MAC 10.8 on VUSB.
Connecting a USB printer through the Cisco VUSB software on a Mac® computer
Connecting a USB printer through the Cisco VUSB software on a Windows-based computer

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

Connectivity problem BEFSR41

I have an old BEFSR41 V.2 router that I pulled out of the closet to use. I can't get internet connectivity after I install it. I can ping the router fine at 192.168.1.1 but still no internet. Is the router dead? Should I update the firmware? I can't seem to find any links for this old router.
Solved!
Go to Solution.

nittany77 wrote:
I havd one other problem now. I hooked up this router so I could move my wireless router to another location in the house for better coverage. So now the wireless router is feeding from this wired router. It still works okay, I have a wifi signal but I can't see the wireless router from my desktop using Cisco Connect. I can see it from the wireless side from a laptop by going to 192.168.2.103 which is the IP it was assigned but I can't see it from the wired side with the same IP. It's not a big deal I just don't understand what is going on. The wireless router is an E1200.
Hi Nittany77. What error message are you getting when you try to open the cisco connect on the computer wired to the BEFSR41 router?
These are the common errors and their recommended workarounds: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8c48ffab84714adb992ca2bf5dd9a529_Cisco_Connect_Err...
Linksys connect or Cisco Connect will only work when a computer is connected to a Linksys Wifi Router as it was mentioned here.

Cisco 1310 problem

First, i want to apologize for my English.
I have a wireless network, which connects areas isolated by the sea.
One of the repeaters have connection problems.
There is a picture that illustrates my problem.
The repeater in red, was installed recently. Because of the distances are added to each output TNC an amplifier of 1 watt.
The problem arises when the bridge that connects to the repeater, it begins to traffic on the network.
The repeater is disconnected, leaving the bridge and repeater offline.
We believe that the problem is caused by the fact that this link is at 12 meters above sea level. And we think that we could solve that problem by adding two amplifiers to the Master AP.
Any suggestion.

You did not include the config files for the 1310's, did you set the distsnce prameter for the radio on the root bridge. for longer distances the AP needs to adjust the time out values.
http://cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/command/reference/cr38main.html#wp2481270
Hope this helps.
Bill

E1550 - Error code 82BD0119, Cisco Connect gives connection timeout error during setup

During setup, after 90% completion I get "adapter connection timeout period expired". I'm unable to configure my router.
I downloaded the lates Cisco Connect software and tried that as well but I get the same problem.
Operating System : Windows Vista Home Premium SP1 (32 bit).
Any help will be apreciated. Thanks.

I believe you have a static IP address assigned in the computer. Here are the steps to check for the wireless:
~~ Go to Wireless network connection properties.
~~ Click On Internet protocol TCP/IP and go to properties.
~~ Select 'Obtain IP address automatically' and 'Obtain DNS server automatically'.
~~ Click OK and then close.
Check for the Local Area Connection as well in the same procedure.
Then uninstall the existing Cisco connect software, reset the router.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
After performing the following steps install the Cisco connect again and check the status.

E3000 Router without Cisco Connect

I just setup my new E3000 which in general is working great. Being a Cisco geek at work, my first step was to connect via http and toss the Cisco Connect CD to the side. After getting the basics setup to mimic my old Cisco 871W, I started to look into some of the whiz bang features on teh E3000.
The first one that I wanted to take advantage of was having a different SSID for the 5GHz band from the 2.4GHz band. In the web interface this seemed simple to do, but although the SSID was showing up on my laptop I was unable to connect to it. As soon as I made the SSIDs the same, my laptop connected to the 5GHz side or 2.4GHz just fine. Is there some magic to getting this setup?
The other feature I wanted to setup was the Guest access. Unfortunately it looks like this feature is hidden unless you use Cisco Connect and if you don't use 192.168.1.1 for your router Cisco Connect can't see it. Am I missing something somewhere?
Thanks,
Ben Story
CCNA, CCNA Wireless, CCDA, CCSP
Ben Story
CCNA, CCNA Wireless, CCDA, CCSP

I initially had a different SSID for the 5GHz band and was able to connect my Wireless-N bridge to it without any problems. However, hours later, both the 2.4 and 5 GHz bands flaked out, and now I can't get anything to connect to them. The wired portion of my router works fine. I'll be doing a firmware reinstall and 30/30/30 hard reset tomorrow. I assume it might be an issue with the firmware being 1.0. if it's not, it's being returned for another unit.
As for guest access, yes, you can only adjust it through Cisco Connect. There is no web UI option for it. If you change the password of your router, its default IP, and possibly its name, Cisco Connect will not work.
Cisco really screwed up this release. Hopefully the next firmware release will fix all of this.

GPIB connection fault after checking connection in NI MAX

Hi,
I have a problem with a system I am using.
I am connecting to 3 Keithley 2410 power supplies in labview using the Agilent 82357B USB/GPIB Interface.
The labview program works... but if I check the GPIB connection in NI MAX or in Agilent connections expert before/ during using labview then Labview can no longer connect to the power supplies. It can originally connect to the first two and then the third connection fails following by them all failing.
Any help would be much appreciated,
Thanks
E

Sounds like you just forced access to the GPIB resource from your LabVIEW program and then you couldn't get the access back. In general, it is a really bad idea to have multiple programs access the same bus.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

Cisco connect problems on max

Similar Messages

Maybe you are looking for