Cisco routers support ipv6 in OPNET?
Hi all,
my question is: which of cisco routers support ipv6 in OPNET Modeler simulator?
please, It's urgent.
Thanks in advance.
Hi Dan,
This is a funny community section to pose questions on the SOHO 97
It's End of Like annoucement was a wee while ago, in June 2006.
http://www.cisco.com/en/US/prod/collateral/routers/ps4866/prod_end-of-life_notice0900aecd804d5ad6.html
As you appreciate, the replacement for the SOHO97, the 800 series product supported IPv6.
I have taken the liberty , in relation to soho97, to copy a section from the IOS software release notes from the following URL;
http://www.cisco.com/en/US/products/hw/routers/ps221/prod_bulletin09186a00801ffda1.html#wp1003249
It states the following in relation to IOS version12.3(4)XG
"Baseline IPv6
Supported Platforms: Cisco 831, 836, and 837 Series Routers; Plus Images Only
Support of the baseline initiatives IPv6 features—providing IPv6 support to all Cisco 830 Series platforms. Further details in release notes."
Like yourself, no where can i see a reference to the SOHO 97 product supporting IPv6.
regards Dave
Similar Messages
-
When is Cisco Spark (Squared) going to support IPv6 like Webex now does?
When is Cisco Spark (Squared) going to support IPv6 like Webex now does?
You're not likely to get anyone commenting on future roadmap features in a public forum such as this one. I'd suggest you use the Settings > Support > Submit Feedback functionality of the Spark client to submit your question directly to the Spark team, or ask through your internal Cisco channels.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate. -
Does Cisco Cloud E-mail Security Solution Support IPv6?
For the Cisco Cloud E-mail Security Solution - does it support both inbound and outbound IPv6? Are there any limitations? I know the IronPort E-mail Security Appliances supports IPv6 - but specifically interested in the cloud service.
Thanks,
--Jimarkhane wrote:
Hi.
Does anyone could explain me about SSL/TLS?
Here is the situation:
E72 allows in securîty settings to select SSL/TLS. I selected it for both accessing and sending mails and I can logon to my POP and send with SMTP. So apparently no problem.
But I asked my internet provider if they support SSL/TLS and they told me no they does not support it....so my question is does really SSL/TLS works in my situation and my provider has no clue on security settings or SSL/TLS does not work but it has no incidence on using my mails as I said I can receive mails and send mails even if those security settings are selected...?
Thanks if anyone could explain me this.
Some e-mail providers like Gmail use SSL/TLS.
http://mail.google.com/support/bin/answer.py?answer=13287
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Cisco switches that support IPv6 L2 security
I'm looking for Cisco switches that support IPv6 layer 2 security. The following features are required:
MLDv2 snooping [RFC4541]
DHCPv6 snooping [RFC3315]
DHCPv6 messages must be blocked between subscribers and the network so that false DHCPv6 servers cannot distribute addresses.
Router Advertisement (RA) filtering [RFC4862, RFC5006]
RA filtering must be used in the network to block unauthorised RA messages.
Dynamic "IPv6 neighbour solicitation/advertisement" inspection [RFC4862]
There must be an IPv6 neighbour solicitation/advertisement inspection, as in IPv4 "Dynamic ARP Inspection". The table with MAC-address and link-local and other assigned IPv6-addresses must be dynamically created by SLAAC or DHCPv6 messages.
Neighbour Unreachability Detection [NUD, RFC4861] filtering
There must be a NUD filtering function to ensure that false NUD messages cannot be sent.
Duplicate Address Detection [DAD, RFC4429] snooping and filtering
Only authorised addresses may be allowed as source IPv6 addresses in DAD messages from each port.
Source: http://www.ripe.net/ripe/docs/ripe-501
I've looked around in some configuration guides for some Cisco access switches but I can't seem to find any switch supporting these functionalities.See if this helps.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
You may also want to consult with your sales team.
What is the application? -
The difference of the IEEE802.1x Auth between Cisco Routers and Catalyst switches
Hello
I am investigating the difference of the IEEE802.1x Auth between Routers and Switches.
Basically dot1x auth is availlable on Catalyst Switches. however if I want to check to
PortBased Multi-Auth , MAC address Auth and any certification Auth with this feature,
Is it possible to integrate into Cisco Router such as Cisco 891F ?
In my opinion Cisco891F is also available to use basic IEEE802.1x but if it compares with Catalyst switches such as Cat3560X
I think there might be any unsupported feature on Cisco 891F.
I appreciate any information. thank you very much in advance.
Best Regards,
Masanobu HiyoshiMany time in interviews asked comaprison between cisco routers and switches that i was answerless bcoz i dont have much knowledge about that.Can anyone provide me the compariosin sheet of the same.how are the cisco devices differ with each other how much Bandwidth each routres support and Etc...
Ummmm ... The most common question I get is "what is the difference between a router and a switch".
However, if you get a question like this, then my impression to this line of questioning are:
1. The candidate they are looking for has in-depth knowledge of routers and switches. And I mean IN-DEPTH!;
2. They are not looking for a candidate. They just want to stroke their ego. There is not alot of people who can give you the "names and numbers" of routers and switches at a snap of a finger. And if you do happen to know the answer, then and there, then expect a tougher follow-up question. -
Ask the Expert: Packet Capture Capabilities of Cisco Routers and Switches
With Rahul Rammanohar
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about packet capture capabilities of Cisco routers and switches.
In May 2013, we created a video that included packet capture capabilities across multiple Cisco routers and switches. For each product, we began with a discussion about the theory of the capabilities, followed by an explanation of the commands, and we concluded with a demo on real devices. In this Ask the Expert event, you’re encouraged to ask questions about the packet capture capabilities of these Cisco devices:
• 7600/6500: mini protocol analyzer (MPA), ELAM, and Netdr
• ASR9k: network processor capture
• 7200/ISRs: embedded packet capture
• Cisco Nexus 7K, 5K, and 3K: Ethanalyzer
• Cisco Nexus 7K: ELAM
• CRS: show captured packets
• ASR1K: embedded packet capture
More Information
Blog URL: Packet Capture Capabilities of Cisco Routers and Switches
Watch the Video: https://supportforums.cisco.com/videos/6226
Hitesh Kumar is a customer support engineer in the High-Touch Technical Services team at Cisco specializing in routing protocols. He has been supporting major service providers and enterprise customers in routing, Multiprotocol Label Switching (MPLS), multicast, and Layer 2 VPN (L2VPN) issues on routing platforms for more than three years. He has more than six years of experience in the IT industry and holds a CCIE certification (number 38757) in service.
Rahul Rammanohar is a technical leader with the High-Touch Technical Support Team in India. He handles escalations in the area of routing protocols and large-scale architectures for devices running Cisco IOS, IOS-XR, and IOS-XE Software. He has been supporting major service providers and large enterprise customers for routing, MPLS, multicast, and L2VPN issues on all routing platforms. He has more than 13 years of experience and holds a CCIE certification (number 13015) in routing/switching and service provider.
Remember to use the rating system to let Hitesh and Rahul know if you have received an adequate response.
Because of the volume expected during this event, Hitesh and Rahul might not be able to answer each question. Remember that you can continue the conversation in the Service Provider, sub-community forum shortly after the event. This event lasts through November 1, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.Hello Erick
Thanks for the topology. The trigger will be different for labelled packet as you would need to mention the values of labels too in the trigger.
Below are two examples of one or two labels being used, it depends on where you are capturing the packet in mplsvpn scenario which will decide teh number of labels being imposed on the packet.
Trigger for one label. (if the router on which you are capturing the packet PHP is being performed)
VPN label - 5678
Source Address - 111.111.111.111
Destination Address - 123.123.123.123
show platform capture elam trigger dbus others if data = 0 0 0 0x88470162 0xE0000000 0 0 0x00006F6F 0x6F6F 7B7B 0x7B7B0000 [ 0 0 0 0xffffffff 0xf0000000 0 0 0x0000ffff 0xffffffff 0xffff0000 ]
Trigger for two labels. (for other core routers)
IGP label - 1234
VPN label - 5678
Source Address - 111.111.111.111
Destination Address - 123.123.123.123
show platform capture elam trigger dbus others if data = 0 0 0 0x8847004D 0x20000162 0xE0000000 0 0 0x00006F6F 0x6F6F7B7B 0x7B7B0000 [ 0 0 0 0xffffffff 0xf000ffff 0xf0000000 0 0 0x0000ffff 0xffffffff 0xffff0000 ]
You can check the labels being used (by using show ip cef <> details) and covert their values to hex and change the trigger accordingly.
I have changed the colors for better understanding. If you notice carefully in the trigger the values for ip address, labels have just been converted to their respective hex values which could be replaced.
Please let me know if this helps.
Thanks & Regards
Hitesh & Rahul -
Does ISE support IPv6 in its dynamic ACLs? We are a dual stack IPv6 site at present. We could leave the guest LAN on an IPv4 only site for the moment, but we intend to go forward and support IPv6 fully. If we wanted to apply DACLs to a port that had a Dual Stack arrangement, is that possible from ISE?
ipv6 support for ise is not implemented yet (version 1.1.3 or 1.1.4)
i thought it will arrive in version 1.2
but as i am looking to improvements in version 1.2 Q&A i cannot see anything about ipv6
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
our customer has blocked ipv6 on wifi as we cannot put dynamically one ipv4 and ipv6 ACLs at the same time
if someone as some "official news" about ipv6 ... would appreciate
rgds,
guillaume -
Cisco 3850 support BFD ?
Hi ,
how can i enable and config BFD on the Cisco 3850 .
i had check eigrp plugin but It have not BFD Platform Support .
Core_IDC3850#sh eigrp plugins
EIGRP feature plugins:::
eigrp-release : 7.00.00 : Portable EIGRP Release
: 1.00.13 : Source Component Release(rel7)
parser : 2.02.00 : EIGRP Parser Support
igrp2 : 3.00.00 : Reliable Transport/Dual Database
external-client : 1.02.00 : Service Distribution Client Support
eigrp-nsf : 2.00.00 : Platform Support
Spatial Reuse Prot : 1.01.00 : Platform Support
mtr : 1.00.01 : Multi-Topology Routing(MTR)
EVN/vNets : 1.00.00 : Easy Virtual Network (EVN/vNets)
ipv4-af : 2.01.01 : Routing Protocol Support
ipv4-sf : 1.02.00 : Service Distribution Support
ipv6-af : 2.01.01 : Routing Protocol Support
ipv6-sf : 2.01.00 : Service Distribution Support
vNets-parse : 1.00.00 : EIGRP vNets Parse Support
snmp-agent : 1.01.01 : SNMP/SNMPv2 Agent Support
Core_IDC3850#
My 3850 OS ver
Switch Ports Model SW Version SW Image Mode
* 1 32 WS-C3850-24T 03.03.01SE cat3k_caa-universalk9 INSTALL
Br
HoraceAs per the Cisco Feature Navigator output, this switch model does not support BFD.
Herewith attached the supported feature of this switch model 3.3.1 software version.
HTH
Rasika
**** Pls rate all useful responses **** -
Does cisco router support "tcp reset" mesg when the traffic blocked by access lit ?
hi ,
im trying to know if i blocked a destination with an access list on cisco.
can i make "tcp-rest " to that connection instead on dropping it ??
i belive it supported on ASA appliance , but not sure if supported on cisco routers.
im trying to migrate from linux router to cisco router and apply the same config , one of the challenging task is , i have
"reject-with=tcp-reset"
im wondering if i can do it on cisco router
waiting ur responce
regardsOne of the things that keeps me engaged with these forums is that they challenge me and give me opportunities to learn new things. My initial reaction to your question about IPS on IOS router was to say that this is not supported. But I did some research and find that apparently IPS functionality is now supported on some (but not all) of Cisco IOS routers. See this link for additional detail:
http://www.cisco.com/c/en/us/products/collateral/security/ios-intrusion-prevention-system-ips/product_data_sheet0900aecd803137cf.html
HTH
Rick -
Which Linksys VPN Routers support Multicast forwarding
Which Linksys VPN Routers support Multicast forwarding / passthru I have remote SPA942 phones connected thru a vpn to a SPA9000/SPA400 system. After manual provisioning the phones work, but voice mail, auto provisioning, etc that use multicast do not work. VPN is using Netgear boxes which do not forward multicast. I'm going to switch to Linksys/Cisco VPN routers but want to make sure which models will do the multicast forwarding.
ThanksI only no of 1 for sure and that is by downloading 3rd party firmware like DD-WRT, the WRT54G. See the below Link.
http://en.wikipedia.org/wiki/Wireless_Distribution_System
Ttech -
How many digital voice ports can Cisco 3663 support ?
How many digital voice ports can Cisco 3662 support ?
They said "Medium complexity Codecs: 360 (E1)/288 (T1) and High-complexity Codecs: 180 (E1)/144 (T1) "in Cisco 3660 voice gateway data sheet .
But another document said you just configured 4E1 on a Cisco 3660 router .
Which one is true ?Hi,
There are some other issue except physically accepted number of voice port.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00800921ed.html
page will give you better idea. Even though you can install many voice ports into a router , there is other limits you encounter.
Bets Regards -
Can Cisco 7200VXR support for VPLS?
Hi all,
I check Cisco Nagivator Feature to find which IOS support for VPLS on Cisco Router 7200VXR and found that IOS image "c7200-spservicesk9-mz.122-33.SRD.bin" can do it as below;
- VPLS Autodiscovery, BGP-based
- VPLS Multiple VCs per Spoke
When I try to configure Virtual Forwarding Instance, it's not allow me to configure the above features (VPLS Autodiscovery: BGP Based, Manual Configuration of VPLS) and only support point-to-point configuration mode you can see it as below
R1#show version
Cisco IOS Software, 7200 Software (C7200-SPSERVICESK9-M), Version 12.2(33)SRD, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 23-Oct-08 12:58 by prod_rel_team
R1(config)#l2 vfi ?
WORD VFI name
R1(config)#l2 vfi VPLS_A ?
point-to-point Point-to-point configuration mode
R1(config)#l2 vfi VPLS_A point-to-point ?
<cr>
R1(config)#router bgp 100
R1(config-router)#bgp router-id 150.1.1.1
R1(config-router)#neighbor 150.1.12.2 remote-as 100
R1(config-router)#neighbor 150.1.12.2 update-source lo0
R1(config-router)#address-family ?
ipv4 Address family
ipv6 Address family
l2vpn Address family
nsap Address family
vpnv4 Address family
vpnv6 Address family
R1(config-router)#address-family l2vpn ?
vpls Address Family modifier
<cr>
R1(config-router)#address-family l2vpn vpls ?
<cr>
R1(config-router)#address-family l2vpn vpls
% BGP: Error initializing topology
R1(config-router)#
I can use "l2 vfi VPLS_A point-to-point" for Layer 2 VPN Pseudo-Wire Switching but not for VPLS multipoint configuration mode. Can Cisco 7200VXR support VPLS on this IOS image? If it can't, which IOS image can do it on this platform.VPLS is not supported on 7200, you can configure point to point here but not point to multipoint, you will have to move to 7600 for that.
-
Does anyone know whether or not ACS v4.2 supports IPv6? I have been trying to find documentation on it but have had no luck yet.
Hi Ben,
Unfortunatly ACS v4.2 does not support IPV6.
Hope below link will help,
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_qanda_item09186a0080094bac.shtml
Regards
Najaf
Please rate when applicable or helpful !!! -
Facing issue in using SNMPV3 on Cisco Routers
Hi,
Actually, i am trying to implement SNMPV3 on Cisco Routers & Switches to manage & monitor these devices in a more secure manner using NMS called Orion (NPM) Network Performance Monitor.
When i am going to add the node on Orion (NPM), it is showing me an error that the device does not support the interfaces MIB.
The Routers IOS Version and its feature set is as under:
Cisco 3800 & 2800 (IOS version 12.4(20)T2 Advance IP Services).
Configuration as under:
snmp-server DEPT_GRP V3 auth context DEPT_CTX read DEPT_VIEW
snmp-server view DEPT_VIEW iso included
snmp-server view DEPT_VIEW internet included
snmp-server view DEPT_VIEW interfaces included
snmp-server view DEPT_VIEW system included
snmp-server view DEPT_VIEW chassis included
snmp-server context DEPT_CTX
snmp-server user SNMPADMIN DEPT_GRP v3 auth sha cisco123 priv des cisco123
snmp-server host 213.42.48.158 version 3 auth SNMPADMIN
At Orion parameters are given as under:
username :- SNMPADMIN
SNMPV3 context :- DEPT_CTX
SNMPV3 Authentication :- SHA1
SNMPV3 Privacy/Encryption :- DES56
Password Key :- cisco123 (All the places)
Kindly help me out and advise me where i am going wrong. Kindly check the configuration above is anything missing in it regarding the SNMPV3 configuration.
Rgds,
Ayaz AliHi Joe,
Thanks for your response. As per your reply, i had removed the context and views which were configured earlier on the router and followed the same instructions as you mentioned in your reply, but i would like to tell you one thing about the configuration that i had done for snmp v3.
Your configuration is :-
snmp-server group DEPT_GRP v3 auth read v1default
snmp-server user SNMPADMIN DEPT_GRP v3 auth sha cisco123 priv des cisco123
My Configuration is :-
snmp-server group DEPT_GRP v3 priv read v1default
snmp-server user SNMPADMIN DEPT_GRP v3 auth sha cisco123 priv des cisco123
In your configuration, you are using Authentication (Auth) for the SNMP v3 group and if u select auth (Keyword) then you have to only provide authentication method (SHA,MD5) no privacy keys for encryption (DES,AES) in snmp user configuration, otherwise it will give you an error that credential not matched on the host when you try to poll the device.
In my configuration, I am using privacy (priv) for the SNMP v3 group, thats why i had given both authentication and encryption keys under SNMP user configuration.
In short, user settings are dependent on the group settings if you are using auth then it only support authentication but no privacy and if you are using priv then it allow both authentication and encryption (privacy).
Thanks for your support, it really helped me out in solving the issue. Now, i am able to poll my all routers using snmp v3.
Rgds,
Ayaz Ali -
How to configure Multiple PPTP VPN Clients on cisco 3g supported Router
I want the router to be a PPTP VPN client to 2 independent PPTP servers, both are in different cities in Cisco routers. I have tested with one on cisco 1841 aqnd its working fine; but when I add the 2nd, its using vpdn-group 1 and therefore connecting to the wrong PPTP server:
here is the config for the one that works:
vpdn-group 1
request-dialin
protocol pptp
rotary-group 0
initiate-to ip xxx.xxx.xxx.xxx
interface Dialer0
mtu 1450
ip address negotiated
ip pim dense-mode
ip nat outside
ip virtual-reassembly
zone-member security private
encapsulation ppp
ip igmp query-interval 125
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 1
no peer neighbor-route
no cdp enable
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap-v2 ms-chap eap chap pap callin
ppp eap refuse
ppp chap hostname xxx@xxx
ppp chap password 7 xxxpassword
But if I create a vpdn-group 2 and a Dialer1 interface, with dialer-group 2, its still attempting to connect to the IP in vpdn-group 1 - how do I get it to use the 2nd vpdn-group, or how do I make this work? and which cisco 3G Router you prefer because these are remote sites and only 3G Internet service is available.I want the router to be a PPTP VPN client to 2 independent PPTP servers, both are in different cities in Cisco routers. I have tested with one on cisco 1841 aqnd its working fine; but when I add the 2nd, its using vpdn-group 1 and therefore connecting to the wrong PPTP server:
here is the config for the one that works:
vpdn-group 1
request-dialin
protocol pptp
rotary-group 0
initiate-to ip xxx.xxx.xxx.xxx
interface Dialer0
mtu 1450
ip address negotiated
ip pim dense-mode
ip nat outside
ip virtual-reassembly
zone-member security private
encapsulation ppp
ip igmp query-interval 125
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 1
no peer neighbor-route
no cdp enable
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap-v2 ms-chap eap chap pap callin
ppp eap refuse
ppp chap hostname xxx@xxx
ppp chap password 7 xxxpassword
But if I create a vpdn-group 2 and a Dialer1 interface, with dialer-group 2, its still attempting to connect to the IP in vpdn-group 1 - how do I get it to use the 2nd vpdn-group, or how do I make this work? and which cisco 3G Router you prefer because these are remote sites and only 3G Internet service is available.
Maybe you are looking for
-
Open Orders...Urgent Help Pls
How can we retrieve open and non cancelled only sales order documents for a particular material...Pls Help me out
-
Can you lock the SPDIF IN of the MBP to an external SPDIF clock?
I've read a lot of inconclusive posts about this. Can it be done? The corollary question of course is: can the SPDIF OUT of the MBP sync to a clock at the SPDIF input? Can both input and output lock to an external SPDIF clock? TIA
-
During automatic creation of the purchase requisition to operation 0010
Hi, Problem occurs in automatic cration of PR. Error : During automatic creation of the purchase requisition to operation 0010, an error (06 532) occurred:message c2325 Regards, Vivek
-
Can't find sn number for my installed copy
I own Iwork 09 (family), but can't find my disk and sn number and need to install this on our new laptop. Is there a way to find the sn number in the installed software on my imac? I probably bought it at the apple store, so I'm not sure how I would
-
My ipod suddenly rebooted for a second time, also problems with turning on
My 32gb ipod touch has been having problems recently. Sometimes when I have no music playing and I sleep it, it just turns off. Sometimes when I have no music playing and I sleep it, it goes to the last thing I was doing (without going to the passwor