Ciscoworks lms3.1 -- netconfig job problems

Hi,
LMS 3.1,when i do a netconfig job for more than >5 devices, in the job tab the status is always showing as running. But when i do it for 2 or 3 devices as a batch it comes as successfull. Nevertheless the configurations are updated when more than 5 devices selected. We tried to reboot the server also. All the services are running in the common services>server>admin>processes tab.
Pls find enclosed the netconfigclient & jrm log files. We started the jobs around Tue Nov 17 07:00:03 hrs

Are you using SSH to connect to your devices? If so, then you are most likely seeing a known bug where SSH sessions can lock up either deploying a config, or fetching a config. All of the known SSH bugs are fixed in LMS 3.2, but patches for RME 4.2 are available from TAC. The bugs are CSCsv95235, CSCsx24218, and CSCsw88378.

Similar Messages

Ciscoworks 4.0, netconfig job, add instance problem

I'm trying to make an adhoc job to some devices in ciscoworks. I select netconfig jobs, select the devices I want to do a change to, and then select add instance, I get a new browser window saying loading and nothing more happens.
I cannot create the config lines I want to perform to my switches. I just want to change the vtp domain name to the switches, but cannot do this due to the blank browser window saying loading.
Anyone know anything about this?
Br
Geir

I just updated my LMS 4.0 device packages, and I cannot reproduce. I then noticed your SharedNetconfigIOS.zip package is larger than mine. I suspect it's corrupt. Go to Admin > System > Software Center > Device Update, check the boxes next to Common Services and Inventory Config And Image Management and download and install all available packages. If none are available, you will need to contact TAC to get an up-to-date package repository to correct this problem. You can click the "Open Service Request" link in the Actions panel of this thread to capture everything we've done here if you have to open a service request.

LMS 4.2.1 Netconfig job CLI output empty

Hi,
I have run a netconfig jobs in LMS 4.2.1 with these settings:
Task Details
Task: AdhocCommands
show interface status
Devices
switch-1
switch-2
switch-3
Task: AdhocCommands
show versionDevices
-----------switch-1
switch-2
switch-3
After running the job the "Device Details" of the jobs say "Successful Devices" for all three switches:
"Deploy successful (Primary Login Succeeded   / Primary Enable Succeeded )"
For the devices switch-1 and switch-2 I get the desired output:
CLI Output
show interface status
Port      Name               Status       Vlan       Duplex Speed Type
Gi1/1     noz Gi2/17         connected    trunk        full   1000 1000BaseSX
Gi1/2                        notconnect   1            full   1000 1000BaseSX
Gi2/1                        notconnect   1            auto   auto 10/100/1000-TX
But for switch-3 the output is empty:
switch-3
*** Device Details for switch-3                          ***
Protocol ==>                             SSH
Device was successfully                             updated.
Template ==>                                  Adhoc_IOS
CLI Output
Template ==>                                  Adhoc_IOS
CLI Output
Any ideas why there is no output although the job is successful?

You Seems to be using incorrect module of ciscoworks to do this. You are using NetConfig.
Netconfig is one of the Configuration Management applications, and it allows you to change the configuration of network devices, provided the configurations are archived. Netconfig automatically updates the archive when it changes the configuration. When you use it it will try to execute the commands to configure on device and would not be interested in collecting the output.
For show commands you should use the NetShow (Nwtwork Show) module. Network show (NetShow) commands represent a set of read-only commands. These are primarily, show commands that you can run on devices that are managed in LMS.
You can specify the commands that you want to group together and then run these commands on one or many devices. The output is displayed in a browser window.
For more details see the Using NetShow Commands section of Monitoring and Troubleshooting with Cisco Prime LAN Managmement Solution 4.2 guide.
-Thanks
Vinod

Netconfig Jobs- Error URN_NOT_FOUND: urn "JRM": Not Found!!

I have a server running Ciscoworks LMS 3.2.1 version. Server has been working without any issues.
Now when I try to go into Netconfig Jobs, I get the following popup:
CFG0008: Error occured while processing.
Possible Cause: URN_NOT_FOUND : urn "JRM" : Not found !!
I've been looking at various threads similar to my situation and tried several, to no avail.
I've progressively been getting better response from my system, by following some potential fixes.
PDSHOW works now and Server Info shows all PASS with exception of ODBC version mismatches (5).
But I still see that JRM will not start.
referenced the following thread:
https://supportforums.cisco.com/message/3342346

Many Thanks !! Up and running.
referenced msg # 3222367
followed the proc for deleting the two ctmregistry files and shutdown Win Rmt Mgmt Svc
Rebooted (clean restart), waited about 15 mins to settle, and all is back to normal.
I did restart Win Rmt Mgmt Svc afterwards, without any impact (left at Manual at startup)
Again, thanks.
garciajm

Netconfig jobs stuck on RME 3.5

Hello fellow netpros,
We currently have CiscoWorks LMS 2.2 installed and sometimes when a netconfig job is run it just get's stuck in the "Job Started" state for no reason.
Then I restart the Change Audit deamon under Ciscoworks Admin, run the same job again and it completes succesfully.
Sometimes jobs also stops and checking the job details the status appears as "Device was not attempted for update".
The CW Server has:
-RME 3.5 with IDU 13
-CM 3.3 with IDU 11
-DFM 1.2 with IDU 5
-CiscoView 5.5
The latest patches are applied
This case has been on TAC's hands for 2 weeks.
Also, I would like to know what is the current procedure for applying Microsoft patches to the CiscoWorks server, I mean is it advisable to run Windows Update on the CW server ? Is it recommended by Cisco ?
I would appreciate if anyone can shed a light on this.
Regards.

Does it throw some other error message as well ?

Cisco LMS netconfig job not saving running config to startup

Hi,
I'm running LMS3.2 and RME 4.3.1. I deployed a netconfig job to our network which consisted of approximately 800 devices.
The report said that the job completed successfully however some of the devices didn't save thier running config to startup. Has anyone experienced this before?
Is it possible to add a command or issue another netconfig job just to save the running config, so I can identify if the job fails on some devices? Using the tick box in the netconfig job doesn't seem to alert you if its not successful.
Thanks,

I have seen in the past where someone is running a netconfig job with the cmd to "wr mem" as a line in the netconfig job.
Sven is correct, there is an option; radio button/check box to save the running config to startup after the job is completed.
if your job is strictly meant to "wr mem/write the config" then run a show command in config mode (non-enable) mode and select the option to save running config after job is completed.

ALV background job problem

Hello gurus,
Kindly help me in resolving this back ground job problem.
We have a program which gives a tabstrip alv output. they are calling subscreens for this and using containers for alv.
its running good in foreground but going dump in back ground execution.
i have used the code written in forums,
data: or_doc type ref to cl_gui_docking_container .
if cl_gui_alv_grid=>offline( ) is initial.
    create object or_custom_container
           exporting container_name = c_container.
create object or_grid
         exporting i_parent = or_custom_container.
else .
create object or_grid
         exporting i_parent = or_doc .
endif .
now the error is ''set screen not allowed in subscreens.''
Could you tell me wats the problem
regards
rajesh

Hi Sandeep,
Change the 1st statement of your program
REPORT ZALV LINE-SIZE 300.
Specify output device as LOCL or LP01 with format as X_65_255 for 255 character width of output.
If width of ALV output is more than 255 say 325, then create a format in SPAD as X_65_325 & assign the same to ALV.
Best regards,
Prashant

LMS 3.2 and RME NetConfig Job - No Devices

I'm runnig CW LMS 3.2 on Solaris 10. If I go to Resource Management Essentials, click on NetConfig, and then select "create" as in "create a NetConfig job", it takes me to the Netconfig Jobs screen. On this screen, I check "select all devices ", but afterwards it says that "0 devices selected". There are over 1000 devices in our inventory, so I cannot understand why they are not found. They are visible on the system module, and in RME-Devices. But they are not availalble for RME Netconfig jobs.
Any ideas?

When I enter the NetConfig jobs screen, I click on "create" ,which takes me to the next screen, where I click on "device" , which takes me to the next screen where I have a select "device box" and a "select task" box. Checking the "all devices" option results in "0 devices select". If I click on the "+" sign on the "all devices" option to expand a list of all devices, it changes to a "-" but does not show any devices.
About the screen shot, due to the confidential nature of my work environment, I may not be allowed to do that. I'm checking with the security manager about that now.

Netconfig job on the interface level

I am trying to create a netconfig job to remove ip helpers from my vlan interfaces. Is this possible? How can this be accomplished? Thank you for your input.

This might be better accomplished with a baseline compliance template instead of a Netconfig job. Create a new advanced baseline template with the following configuration:
Submode: interface [#Vlan.*#]Body:- ip helper-address [HELPER]
That should remove all ip helper-address entries from all Vlan interfaces.

Deciphering NetConfig job failure

Have a job that simply runs "write memory". It recently started failing on a couple of rtrs:
Results for Device rtr1
Device Deployed
Pre Device Execution Message:
Post Device Execution Message:
Update Startup Not Attempted
Results of Deploy:
Message: Command(s) failed on the device
Insufficient no. of interactive responses(or timeout) for command: write memory. SCP: SCP and RCP protocols are supported only for conf
ig mode commands.
Couldnot copy file contents from Server to device because the device mode of the command was CONFIG.
TFTP: Tftp is supported only for config mode commands.
write memory
Results for Device rtr2
Device Deployed
Pre Device Execution Message:
Post Device Execution Message:
Update Startup Not Attempted
Results of Deploy:
Message: Command(s) failed on the device
Could not detect SSH protocols running on the device
^MSCP: SCP and RCP protocols are supported only for config mode commands.
Couldnot copy file contents from Server to device because the device mode of the command was CONFIG.
TFTP: Tftp is supported only for config mode commands.
write memory
Transport protocol order is: SSH, SCP, TFTP.
Was rtr1 running out of VTY lines at the time of the job execution?
Was rtr2 really not responding on SSH?

Do you mean IOS on rtr1 could be throwing up an unexpected prompt that NetConfig didn't know know how to respond to?
At this point, I suspect rtr1's "write mem" took so long that LMS mistook it as a timed out session. Should I simply bump up the timeout under RME - Admin - Config Mgmt - Archive Mgmt - Fetch Settings, or would that not impact NetConfig jobs at all?
Are there process debugs that could be turned on in order to capture the full interactions between NetConfig and the devices in a more readable output, or would I be better off getting a sniffer trace for both rtr1 and rtr2?

NetConfig Jobs pause before sending next command

Is there a way to pause sending the second command until the first command completes in a NetConfig Jobs User-defined task? I'm trying to get the following commands to send but it fails on the second command due to lack of response:
delete /force /recursive flash1:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash2:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash3:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash4:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash5:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash6:c3750-ipbasek9-mz.122-55.SE1
copy tftp://139.78.103.93/IOS/3750/c3750-ipbasek9-mz.122-55.SE5.bin flash1:
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash2:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash3:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash4:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash5:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash6:/c3750-ipbasek9-mz.122-55.SE5.bin
configure terminal
boot system switch all flash:/c3750-ipbasek9-mz.122-55.SE5.bin
exit
write memory
reload

I would generally use a state machine because you will want your user to be able to abort in the middle of the delay. You can use use the time of day (in seconds) and check this at some periodic basis. You dont' want to poll so quickly that you consume all of the CPU cycles and you don't want to delay too long so you can still respond quickly to user requests such as aborting the application.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Ciscoworks LMS3.2 Device Support

I have recently upgraded to Ciscoworks LMS3.2 and noticed some devices are still showing as device type "unknown". Is there an update available for LMS3.2 to support G2 Routers such as the 1900, 2900, and 3900 series? If so, how do I go about applying this device update? Thanks.

You can upgrade to the latest device packages from DOS like this:
PSUCli.bat -p cmf -d -dst c:\psu_download -all
Will download Common Services packages to C:\psu_download\cmf. Then install this way:
PSUCli.bat -p cmf -install -src c:\psu_download\cmf -all
I prefer doing these device package updates via CLI as this lets you actually follow what is happening.

LMS3.2 Log rotation problem

Hi,
we use LMS3.2 (windows single-server) for ~4500 devices and have a problem with log rotation.
That's our configured log roation:
Name with location
Size (kb)
Format
No.of Backups
1.
D:\CSCOpx\log\dcrclient.log
102400
gz
3
2.
D:\CSCOpx\log\ICServer.log
102400
gz
3
3.
D:\CSCOpx\log\syslog.log
1024000
gz
5
The backup directory is the same as the usual log directory. The size of the 3 files is already bigger than the configured size in log roation, see:
dcrclient.log     2,1 GB
ICServer.log     1,1 GB
syslog.log        9,7 GB
After the log roation configuration we restarted the daemon manager, but it's not working. There are no backup files created and the 3 files are still growing.
Regards
Hendrik

After you configure the log rotation you need and restart the daemons, you need to schedule the job. The schedule buttong is available under
Common Services -> Server -> Admin -> Log Rotation.

Oracle report generation jobs problem

Hiii,
We have installed the Oracle Clinical 4.6 version forms and report server is installed in same server. After installation we tried to submit the job . The job is successfully submitted but the problem is the status of the job is always set o Submitted_RS. We need to resolve this. if any body know the solution plse provide
Thanks in Advance

Hi,
When i used to get only one page the options like facing, continuous facing are disabled. And displays only single page.
These options are enabled only when there are multiple pages in pdf.
One more thing i found that it happens when I first view the report as pdf it displays
all the pages, then i change the display format to csv and again when i change
the format to pdf the problem starts.
And when I will restart the report server service, it works fine again until i wont view it in CSV format.
Message was edited by:
Yogesh

Background job Problem

Hi,
I scheduled a Program for background job running for every 10 minutes.
When i go to SM37 I am seeing all the background jobs, it is creating a newline for every 10 min in the list.
my problem is , Is there any settings to change for showing only one job that means over writing the old job and show the latest job.
Thanks in advance,
fractal

Assuming that intention is to monitor jobs that are either failed or active, you can deselect rest of the radio buttons at the selection screen so as to see failed / active jobs.
Other than this, I dont think there is any solution / way to do this.

Ciscoworks lms3.1 -- netconfig job problems

Similar Messages

Maybe you are looking for