CJ88 and CJI3 for particular period showing different values

Hi,
We have automatic rule creation.
Now, we are running period settlement for period 5.
sender is WBSE
receiver is FXA
CJI3 is showing 1,171,580.82
CJ88(Test Run) is showing 1,381,580.82
Why there is difference in two, and this difference is coming only for 3 projects.
I have checked the currency, it is fine.
I tried CJEN but still the same thing.
Thanks,
Harsh.

Hi,
Nitin, There is AUC. I made typo error.
We found what was causing the difference:
It was same old down payment problem.
Closing thread.
Thanks Everyone,
Regards,
Harsh.

Similar Messages

Env variable for custom top showing diffent values

hi,
we cloned the prod to UAT then the
value for env variable for custom top showing different values.
ie,
backend it is showing
echo $XXECO_TOP
/oracle/UAT/apps/apps_st/appl/xxeco/12.0.0 (this is the correct value)
from the front end when we submit the "print environment variable" concurrent request it shows the following incorrect value
/dev/oracle/app/oraprod/apps/apps_st/appl/xxeco/12.0.0 (this is prod value)
please let us know how to correct the value
Edited by: 831498 on Feb 18, 2011 6:26 AM

Hi,
Post your Query to http://forums.oracle.com/forums/forum.jspa?forumID=475
Regards,
Gyan

Setup data for particular period.

Hi All,
We are loading data to BW last 5 yrs.Now I want to do the set up for particular period for an LO data source.Where can I do the time settings so that I can load only for that particular period.
Regards
Ajay.

Hi,
It actually depends on the application you are referring to.
If you see in the below transactions for filling up of set up tables for different applications, you will see that a certain date field is available for selection for some of them. Please refer below. You can also check it directly in the system using the transaction.
Tcode: Application number: Date filed available
OLI1BW: Application 03(material movements): Posting Date
OLI3BW: Application 02: Document date
OLI4BW: Application 04: Created on date
OLI7BW: Application 11: No date selection possible
OLI8BW: Application 12: No date selection possible
OLI9BW: Application 13: No date selection possible
Hope this helps,
Regards,
Shilpa

New iphone. someone else put in their username and password. time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ?

new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
Regards.

Value contracts Maintenance Orders (service Orders) for particularly period

Hi Experts,
My client wants Value contracts Maintenance Orders (service Orders) for particularly periods. How can I maintain this scenario in sap MM.
Thanks in advance,
Chandhu

Thanks for your replay,
I have tried already standard value contract.
I have mentioned 1000 service number in value contract. But I am not getting service number at the time of Purchase Order creation with Value contract reference number.
Thanks
Chandhu

Enable awr and tkprof for particular sid

Hi all,
how to enable awr and tkprof for particular sid.
it is very urgent
Thanks
mano

Trace a session.
1)Logout all sessions from the database
2)Login to application (ensure that only one session is available)
3)sqlplus trace/trace@026
4)check the sid and serial# of the session from v$session
Use the following query
SQL> select username,to_char(logon_time,'DD-MON-YYYY HH:MI:SS') from v$session where username='<db username>' order by logon_time;
SQL>exec sys.dbms_system.set_sql_trace_in_session(sid,serial#,TRUE);
5)now execute the report/transaction.
6)once the activity is over
SQL>exec sys.dbms_system.set_sql_trace_in_session(sid,serial,FALSE);
7)Now the trace file will be available in the udump folder of the database ip 10.44.0.26
Userid/password: trace/trace
The trace wil be available in /oracle/admin/orcl/udump
8)To find the name of the trace file use the below query
select spid from v$process where addr=(select paddr from v$session where sid=<enter the SID>);
This will give the name of the file
If you are not able to identify the trace file then please remove all files in udump before starting trace.
9) ftp the trace fil to ur local pc and issue the tkprof command
TKPROF <trace file (like D:\orcl_8853.trc)> D:\trace.txt explain=Oracle username/password (application user) sort=(prsela,exeela,fchela)
This will give trace file in readable format(you need to have 10g client on your pc for tkprof to work)

FSV showing different values when executed by different users

Hi Experts,
While executing FSV throug RFBILA00 we are getting different values when executed by differet users. Variant selection is same except the user (which is different). For one user report is perfect for another user some GL accounts were not displayed and some accounts shows different values.
Anybody could help on this. Is there any userwise settings are there.
Thanks in advance.
Regards,
Narayanan

Hi,
check user authorization, maybe one user has limited display authorization for some values (as they are linked to specific profit center,...)
BR Christian

Result Analysis Values For particular period/year!!

Hi Experts
We are in a customer project, tenure of a project is around 2 to 3 years. As company follows Accounting standard AS-7 where we need to recognize the revenues in the same period in which the cost incurred. So, to achieve that we have planned the cost and revenue periodically for the years 2011-2012 ,2012-2013. But when i am running RA (KKA2) the results shows planned revenue and cost as sum of all the years ,so accordingly POC will be based on overall Plan Cost and not Annual(Period ) based.
But our requirement is that when i run RA for given period of particular year then RA should show planned cost and revenue for that particular period/year and accordingly rest of the values like; POC, WIP, Reserves etc.. should get calculated .
Please suggest how to approach to achieve the same.
Thanks in advance..

I think it is possible to meet your requirement through valuation method settings.
please read sap help on RA.
Please follow the below path to access the RA help
SAP help portal -- Financials >> Controlling >> Product Cost Controlling >> Cost Object Controlling >> Product Cost by Sales Order >> Period-End Closing in Product Cost by Sales Order: Scenario >> Result Analysis

"Show List of values" showing different values than "Preview List of values for the same dimension Object

Hi All,
I have a dimension object in Business Layer which is showing a different values than the original database values. When I right click on the object and select "Show List of Values its showing values which are not related to the original values in the database but if I right click on the same object and select "Preview List of Values" it shows the right values present in the database. Any suggestions on how to rectify. It was working good and many reports have been built using that particular dimension.
Is there any way to fix the problem without the deleting the object or recreating another similar object as the object has been used in several reports, so by deleting or recreating the object may break the reports.
Please help!

Hi
A list of values is a list that contains the data values associated with an object, Lists of values inserted in the data foundation are inherited by any business layer based on the data foundation.
Right click on the object and select “Show Values”… Display all the DB values including null
Preview List of Values – also display same values...getting differnece meens...Check weather using any Static List of Values.
If you uncheck the Associated list of values check box "Preview List of Values" options is disabled.
For best practice …LOV is disabled for un-necessary dimension objects
Also If you have Db access check the correct data by
SELECT
Distinct Schema name. Table/View name. Object name
FROM
Schema.name. Table/View name

A/R, A/P and MM for the periods

Dear All,
I closed all periods for A/P, A/R and MM for July 2009 so no-one could post to them. However, because the GL was still open for June, July and August, it allowed others to post to A/R; A/P; MM. When closing the periods we have to leave the GL open for month-end closing Journal Entries. How do we keep others from posting to what we believe were closed periods?
Please clarify me.
Regards
Partha

Look here,
     From Acct     To acct.             Fr period     Year     To period     Year
+                                                       7     2008     8     2009
A                    ZZZZZZZZZZ     1     2009     8     2009
D                    ZZZZZZZZZZ     8     2009     8     2009
K                    ZZZZZZZZZZ     8     2009     8     2009
M                    ZZZZZZZZZZ     8     2009     8     2009
S                    ZZZZZZZZZZ     7     2009     8     2009
This is the case, system alowing to posting June and July also.
Regards
Partha

CALCLATED KF SHOWING DIFFERENT VALUES FOR DIFFERENT CURRENCY TYPES

Hi Experts
When I am executing the query( On a Multi provider) with the selection of Company code, controlling area, WBS ELEMENT, currency type I am seeing two different values (XXXX EUROS and YYYY EUROS)for a formula for total variable cost when i select two different currency types( CONTROLLING AREA AND GROUP CURRENCY)
I have two currency types called CONTROLLING AREA CURRENCY and GROUP CURRENCY(BOTH IN EUROS).
This WBS element is not having any sales document.How can I see the exact value for this WBS element in the R3 side.
Is there any possibility that the same dataelement TOTAL VARIABLE COST have different values when i execute with differnt currency types in the selection screen.
In what approach can i proceed from R3 side to the query to solve this issue. on the R3 side when i see in FB03 (settlement posting) for this WBS it is balanced. I am seeing only partial posting for this in the Query
Could any one help me to solve this.
Thanks in Advance
Best regards

Hi Rajesh,
I guess the holiday which was configured in Holiday calendar (Holi) is not declared as Paid holiday in Public Holidays-Holiday Calendar.
Goto SCAL - choose Public Holiday - change mode - look for the holiday (Holi) configured - change mode again - lookout for 'Public Holiday Class' and see whether ' 1 ' is maintained there, if not maintained, type 1 there and save it.
PS (1 - Ordinary Public Holiday....i,e paid holiday).
Now go to PT01 and generate WSR. This will sort out your issue.
If the above is not working,
I guess there are different PSA/ESG grouping for the employees and maybe their Holiday Calendar itself is different. check out whether the PSA and ESG grouping in Time Mgmt is same or different for those employees for whom the paid holiday is not getting generated and also check out the Holiday Calendar for these set of employees and try the above given solution there.
Hope this helps.
regards,
Santhosh
Edited by: Santhosh on Mar 31, 2009 11:34 AM

Requesting detailed config and setup for forecast 'period splitting'

I have searched the SAP community, and found little detailed information about configuration and setup for SAP forecast 'period splitting'.
I have selected the standard scenario in the 'Splitting Indicator' (1 - 2 - 4) in MM03/MRP3 for splitting month periods into weeks - AND - I have set the MRP Type found in MM03/MRP1 to 'VV' as specified (with "obligatory forecast indicator set on, which supports forecasts to be used as a basis for MRP).
Doing so has not resulted in my monthly inputted forecasts being split into weeks.
I am thinking that there is some missing configuration that is needed. Please advise if you can.
Thank you

Bert,
Now I am more curious than ever. You mention that your forecasts are not generated by SAP, but are generated by an external forecasting program, using requirements type VSF.
This sounds like your interface program is entering Planned Independent Requirements, not forecasts (for VV MRP type, the MRP element for forecast requirements is called "FORERQ" and not "IndReq"). The field to which you refer ("Splitting indicator" in the MRP3 tab) has no impact on Planned Independent Requirements. To my knowledge, it only works with the integrated forecast generation program that is commonly used in VV MRP type.
Best Regards,
DB49

PO Release Strategy not triggerred for particular Total Net Order Value

Dear,
I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
Please suggest for solution.
Thank you.
Warm Regards.

Dear All,
While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
May I know how the value for this field gets calculated.
Thank you.
Warm Regards.

MB5B & MRN9 Report showing different values

Hi All,
I am facing a problem when i am running MB5B & MRN9 report on back date, In both the reports stock is displaying correct but there is some difference in value. Material is managed by moving average price. Please provide your valuable inputs.
Thanks
Rashid

hello !
The transaction MRN9 is not designed to display the stock quantities and values for each date in a month. The transaction MRN9 only displays the quantity and value to the 'period end' which refers to entered field 'key date' or displays the actual quantity and value if the 'key date' refers to actual period. These data are selected from database tables MBEW (actual) or MBEWH (historical periods).
If you will get the quantities and values for a special date (not a period end) you should use transaction MB5B which is additional selecting the documents posted until 'selection date' with option 'valuated stock'= 'X'.
The transaction MRN9 provides a comparision of stock values for a selected period end with the values according to 'new calculated price' from functions 'determine lowest value' or 'FIFO-price' and is calculating the 'devaluation value'. This devaluation is normaly done only for a period end date(especially at end of fiscal year).
If your are using the function of 'determine lowest value' (transactions MRN0, MRN1, MRN2, or function 'FIFO-valuation' (transaction MRF1) you can store the calculated 'lowest price' of 'FIFO-price' in one of available fields(tax price1-3, commercial price1-3) in material master. (please see also SAP documentation).
You can also see the notes for this as well.
590699 MRN9 Connection to key date and stock data
486442 Lowest value: Significance of key date
I hope these informations will help to understand the functions of transaction MRN9.
Good luck!
Plauto

PDF for multiple users with different values

Is there a way to create a PDF to be sent to multiple users but have different values in the PDF? For expample employee A's offer letter is for $50/hour while employee B's offer letter is for $55/hour. But they have the same offer letter just with different values.
I have Enterprise EchoSign and FormsCentral.
Thank you!

Hi,
Thanks for asking, but FormsCentral currently does not support this.
Perry

CJ88 and CJI3 for particular period showing different values

Similar Messages

Maybe you are looking for