CJ88 in Background / BAPI for CJ88 / BAPI for Settlement
Hi Experts,
Is there any BAPI for CJ88. I am developing a report in which I need to pass a WBS element for its settlement which we do in CJ88.
Thanks in advance
Edited by: priti suryawanshi on Jan 10, 2009 11:39 AM
Edited by: priti suryawanshi on Jan 10, 2009 12:14 PM
Thanks a lot Shrikant for ur reply.
Actually i have developed a y-report in which i give project def. as input. Now when i execute the report,
in the report i read the wbs element of thar project def. whose settlement i need to do. The problem is that if any error comes during the settlement, i need to capture these errors and restrict the report from futher processing.
When we manually execute through CJ88 transaction, we give the wbs element and if any errors, we can see them in the display. Now i am not able to cpture these errors. So was asking for a BAPI or FM which can serve the purpose.
Similar Messages
-
Program works but background job for that program fails....
I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1) First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2) Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3) Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAmRobert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = FILEPATH
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use.. -
How to give Common Background color for all JPanels in My Swing application
Hi All,
I am developing a swing application using The Swing Application Framework(SAF)(JSR 296). I this application i have multiple JPanel's embedded in a JTabbedPane. In this way i have three JTabbedPane embedded in a JFrame.
Now is there any way to set a common background color for the all the JPanel's available in the application??
I have tried using UIManager.put("Panel.background",new Color.PINK);. But it did not work.
Also let me know if SAF has some inbuilt method or way to do this.
Your inputs are valuable.
Thanks in Advance,
Nishanth.CIt is not the fault of NetBeans' GUI builder, JPanels are opaque by default, I mean whether you use Netbeans or not.Thank you!
I stand corrected (which is short for +"I jumped red-eyed on my feet and rushed to create an SSCCE to demonstrate that JPanels are... mmm... oh well, they are opaque by default... ;-[]"+)
NetBeans's definitely innocent then, and indeed using it would be an advantage (ctrl-click all JPanels in a form and edit the common opaque property to false) over manually coding
To handle this it would be better idea to make a subclass of JPanel and override isOpaque() to return false. Then use this 'Trasparent Panel' for all the panels where ever transparency is required.I beg to differ. From a design standpoint, I'd find it terrible (in the pejorative sense of the word) to design a subclass to inconsistently override a getter whereas the standard API already exposes the property (both get and set) for what it's meant: specify whether the panel is opaque.
Leveraging this subclass would mean changing all lines where a would-be-transparent JPanel is currently instantiated, and instantiate the subclass instead.
If you're editing all such lines anyway, you might as well change the explicit new JPanel() for a call to a factory method createTransparentJPanel(); this latter could, at the programmer's discretion, implement transparency whichever way makes the programmer's life easier (subclass if he pleases, although that makes me shudder, or simply call thePanel.setOpaque(false) before returning the panel). That way the "transparency" code is centralized in a single easy to maintain location.
I had to read the code for that latter's UI classes to find out the keys to use (+Panel.background+, Label.foreground, etc.), as I happened to not find this info in an authoritative document - I see that you seem to know thoses keys, may I ask you where you got them from?
One of best utilities I got from this forum, written by camickr makes getting these keys and their values very easy. You can get it from his blog [(->link)|http://tips4java.wordpress.com/2008/10/09/uimanager-defaults/]
Definitely. I bit a pair of knucles off when discovered it monthes after cumbersomely traversing the BasicL&F code...
Still, it is a matter-of-fact approach (and this time I don't mean that to sound pejorative), that works if you can test the result for a given JDK version and L&F, but doesn't guarantee that these keys are there to stand - an observation, but not a specification.
Thanks TBM for highlighting this blog entry, that's the best keys list device I have found so far, but the questions still holds as to what specifies the keys.
Edited by: jduprez on Feb 15, 2010 10:07 AM -
Background color for column heading
Hi,
I have 5 columns in my report and I would like to have different background color for column headings. How can I do this in report templates?
I was looking at Column heading section-
<th class="t10ReportHeader"#ALIGNMENT# id="#COLUMN_HEADER_NAME#">#COLUMN_HEADER#</th>
How can I specify backgrund colors for all columns here?
Thanks in advanceG'day Karen,
Thanks for ur reply.
I have seen this note before, its not that the header colors have changed after latest SP was applied in our systems. Also the ABAP and JAVA stacks are in sync.
Scenario is that we are trying to set up a new Portal theme for Enterprise Reporting with some specific color codes (hex codes).
What i have observed is Characterstics Header background color is set up using the element "Background Color of Level 1 Column Heading ".
While the Background color for Key Figures header is using element "Background Color of Level 2 Column Heading ".
But the problem is element "Background Color of Level 2 Column Heading " is also used as the Background color for Standard Characterstics cell, so if we make it same the whole report of the same color, which we dont want.
Requirement is to get the same Background color for Header cells (both Char. and Key Figure headers).
Any further suggestions will be appreciated.
Thanks
CK -
BackGround Job for Transaction VF06
Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha KapoorHi,
I have the seen the Log it tells:
Date Time Message text Message class Message no. Message type
29.06.2008 22:00:48 Job started 00 516 S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH) 00 550 S
29.06.2008 22:00:48 Job finished 00 517 S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor -
Can ABAP proxy to consume WSDL file be run as background job for every10min
Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1) Should I create a web service or should I consume a web service?
2) If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3) Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
num type i,
end of ty_data.
DATA: itab TYPE standard table of ty_Data,
la_data like line of itab,
xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
<table>
<tt:loop ref=".table">
<item>
<tt:value ref="NUM"/>
</item>
</tt:loop>
</table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel -
Error in Schedule Background Job for Deadline Monitoring of swu3
While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of itthe earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help -
Problem in Setting Background Color for JButton
Hi,
I am using Background color for JButton (color is selected from the customized JColorChooser created by us) where it contains the option of transparency. If we choose light color, then the background is set to JButton, but when we mouse-over the JButton, other components inside the container (JPanel) is getting displayed inside the button.
Can anyone help to sort out this problem.
Thanks in advance.Hi,
Here is the code.
DialogWrapper is JDialog and ColorEditorPane is JPanel.
DialogWrapper dlg = new DialogWrapper();
ColorEditorPane colorPanel = new ColorEditorPane();
colorPanel.setValue( _data.getTransparentColor());
dlg.showWrappedDialog( colorPanel, "color_help", "color_dialog" );
if( dlg.isOK())
Color chosenColor = (Color) colorPanel.getValue().getContent();
_data.setTransparentColor( chosenColor );
_transparentColorDisplay.setBackground( chosenColor );
_transparentColorDisplay.setOpaque( true );
this.repaint();
this.doLayout();
this.validate();
}I've several components like JCheckBox, JRadioButton, JTextField in "this". -
Schedule a background job for a program using ABAP code.
Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
*** matnr(20) type c,
*** mbrsh(30) type c,
*** mtart(30) type c,
*** kzsel(20) type c,
*** maktx(40) type c,
*** meins(5) type c,
*** end of itab.
data: begin of record occurs 0,
* data element: MATNR
matnr_001(018),
* data element: MBRSH
mbrsh_002(001),
* data element: MTART
mtart_003(004),
* data element: XFELD
kzsel_01_004(001),
* data element: MAKTX
maktx_005(040),
* data element: MEINS
meins_006(003),
* data element: MTPOS_MARA
mtpos_mara_007(004),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\jitu\bdc\10002.txt'
filetype = 'ASC'
has_field_separator = 'x'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = record
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-matnr_001.
perform bdc_field using 'RMMG1-MBRSH'
record-mbrsh_002.
perform bdc_field using 'RMMG1-MTART'
record-mtart_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-kzsel_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
record-maktx_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-meins_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************& -
How can I use a JPEG file as a background image for my vi in 8.5
Im working on a vi that I plan on using as part of an alarm system. I would like to use a JPEG file of my house as a background image for the vi, or possibly to just be displayed in a window on the control panel. I have seen people use their own images before, but never looked at what this involved.
Im trying to use the "read JPEG file" vi and the "draw flattened pixmap" vi to accomplish this. The vi does run, but nothing shows on the front panel. If I try to create an indicator from the "new picture" output of the "draw flattened pixmap" vi, I get an empty white window on the front panel.
Any advice?
Thanks
Solved!
Go to Solution.Guruthilak wrote:
the earlier vi (using the JPEG) works fine. just increase the size of the picture control
I figured this was the problem. And to the OP, I'm glad a bitmap worked, but no I didn't mean use any sort of LabVIEW programming at all. I meant open your image in Microsoft Paint, Press ctrl+A to select the whole thing. Then copy the image to the clipboard. Now select your front panel and press ctrl + v to paste it. No programming needed and the image is there. However, if you want to programmatically change it, you will need a picture control.
CLA, LabVIEW Versions 2010-2013 -
How to create a background image for each item in a List object
Hello.
I am trying to create a background image that displays whenever a user posts something to a list. For example when a user posts text it would appear in a list. The new item in the list would contain a specific background image with the users text appearing on top of the background image. I do not want a background image for the entire list, rather each item within the list.
I am not sure how clear this is so I added an image below. When a user enters text in and clicks the "post-it" button their text would appear below with the sticky note background.
I am not sure which list type would be best for this problem or how to create insert the image, so I am open to suggestions.
Thank you for your help. Any advice or guidance will be greatly appreciated!Hi
the easiest way would be with itemRenderer.
You have to do two things:
1. In your list declaration use a item renderer: <mx:List itemRenderer="myRenderer"/>
2. create a flex component myRenderer that will be the single item. This can be a canvas with a background image and a text field on it.
When you add a new item to the list, a new myRenderer item will be created and the data property will be passed to it. So you have to put "data" in your textField.
If you need more help try looking at Tour de Flex samples, they're pretty easy.
Andrei -
How to set background color for selected days in DateChooser
How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advanceThere is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application> -
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
Error while running Background Sync for User, Roles
Hi All,
I get the below errors when i am scheduling background jobs for User and Role Sync
We have connected another system APO to GRC, we already have ECC running
for the APO system we used the connectors VirsaXSR3_01 (Metadata, model) for this
Any ideas why they are failing
Error while executing the Job:Interface Controller does not exist for Component Instance VirsaXSR3_01 in Component Usage VirsaXSR3_01
Error while executing the Job:type com.virsa.cc.modelvirsaxsr3_01.types.So_Text001 could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SL
ThanksHi All,
Thank you for your inputs, but i figured out the issue with the error,
Our basis folks actually made the mistake creating JCO's
They created VIRSAXSR3_02_METADATA & VIRSAXSR3_01_MODEL instead of VIRSAXSR3_01_METADATA & VIRSAXSR3_01_MODEL
this has been rectified and my background jobs run fine now.
Thanks -
Page background disappears for a moment on page turn in pdf
In indesign my document has a gradient page background (created in indesign) on the master page to make it look like a book. But when the page is turned in pdf, the background disappears for a moment, leaving the page white, then the background appears again; it does this nearly every time page is turned, flashing white. Does this have to do with pdf or indesign layers? I have only 1 layer in the indesign document, and transparency blend space is set to rgb.
Everytime you change the page Acrobat needs to redraw all of the page elements. The dealy is probably a reflection of the amount off video memory available, as much as anything.
-
Can't see my iTunes library when selecting background music for a slideshow
I don't see my iTunes library when I'm selecting background music for a slideshow -- I have tried using iphoto help (seee below) and it didn't work:
"If you don't see your iTunes library:
Quit both iTunes and iPhoto. Relaunch iTunes first, then iPhoto.
If you recently installed iLife software, it's a good idea to open each application in the following order: iTunes, iPhoto, iMovie, and then iDVD. Because these applications are integrated to browse and import files from each other's media libraries, this ensures that you will be viewing the most up-to-date versions of your music library, photo library, and movies folder no matter what application you're using.
Recreate your iTunes Music Library.xml file. Quit iPhoto, iMovie, iDVD, and iTunes. Click the Finder icon in the Dock, and choose Go > Go to Folder. Type "~/Music/iTunes" or "~/Documents/iTunes" and click Go. Drag the "iTunes Music Library.xml" file to your desktop. Open iTunes and create a new playlist by choosing File > New Playlist. Quit iTunes and open iPhoto to make sure you can see your iTunes library when creating a slideshow."
Any suggestions?
MacBook1,1 Mac OS X (10.4.8) using itunes 7.0.2 (15) and iphoto 6.0.5 (316)
MacBook1,1 Mac OS X (10.4.8) versions: itunes 7.0.2 (15) iphoto 6.0.5 (316)I have this problem also - tried following advice giving from original problem.
My settings are through the what I call the Lug Nut icon - no arrows and no dimple showing on my screen.
Is there some small thing I'm missing here - weird thing is that iDVD allows me to access my iTunes library - no problem.
When I go to Finder it tells it can't find my Music folder??? I can see it in the sidebar .....
Any suggestions - I don't know how to send those screen shots but what a great idea.
Ruth
Maybe you are looking for
-
I have tried turning off my iPad and the wifi. I don't know what else to do or try.
-
Can't move anything on desktop or finder etc.
Problem: I can't move files from desktop to finder window. Can't rearrange items in finder window. Can move items to trash using keyboard but not trackball. Can't remove icons from dock; and can't change desktop picture. When I try to change desktop
-
10.6.1 Server - cannot prevent authenticated users from creating a blog
I have a brand new Snow Leopard (10.6.1) 2.26 Ghz quad core Xserve with 12Gb RAM that will be used for web collaboration services. I've currently set up Wiki and Blog services with a group membership to allow creating wikis/blogs. The reason for this
-
How can I review the pictures in the trash before emptying it?
I have over 500 pictures in the trash, and want to double check that desirable pictures didn't end up there inadvertently. How can I review pictures? I tried pulling them back into a folder, but I couldn't pull them out of the trash. Help!
-
Why do I have to convert t2i files to pro res in fcp x? What difference does it make ?
Hey Guys, Just wondering why do I have to convert canon t2i files to prores in fcp x? What difference does it make ? I'm able to edit in fcpx the files that have just been imported diectly in. Does it cause any problems in export? Thanks so much, Jam