CJS-00030  Assertion failed: Execution of SQL script reports an unexpected error.System Copy

Experts,
I am performing Homogeneous System copy using backup/restore method.I have taken QA system backup ie dump files and trying to build on Sandbox system for testing purpose.Everything went fine and was able to load the dump but stuck at one of the point and throwing me error
ERROR      [cinstallercallbackimpl.cpp:228]
CJS-00030  Assertion failed: Execution of SQL script reports an unexpected error.
When I checked the sapinst_dev log I found the below error but not able to fix it and not aware to proceed further
1> use SID
1> EXEC sp_changedbowner sapsa
Msg 17362, Level 16, State 1:
Server 'SID', Procedure 'sp_changedbowner', Line 181:
The proposed new db owner already is a user in the database or owns the database.
(return status = 1)
I am sure these may be small changes that have to be made by changing the db owner and Im not exactly sure how to perform it.
Note:I am Using the Windows environment with Sybase ase database and SWPM tool to perform.
Appreciate your suggestions
Thanks

I fixed the issue ..by changing the owner sapsa.Bingo !!!!

Similar Messages

  • CJS-00030  Assertion failed: dbSidOrSrcObject and dbHome are not valid

    Hello Guru's,
    we trying to do os migration of SAP XI 3.0 system,
    we have export from source system and building target system below see the steps followed.
    1. install CI on target server
    2. installing DB instace on target. But before proceeding further I have installed oracle software successfully and check it using
    sqlplus > it is able to connect to sql.
    know problem is after installing oracle sofware when I continued the DB instance installation.
    System give me error as
    CJS-00030  Assertion failed: OraSqlContext constructor: arguments dbSidOrSrcObject and dbHome are not valid ****
    Dont know to solve this issue.
    please help me in this
    REgards,
    Syed Maqsood.

    Hi,
    My oracle release is 9.2.0.6 and i check the environmental varialbe for ora<sid> user below as below:
    uvmn3000:oradx1 7> env
    USER=oradx1
    LOGNAME=oradx1
    HOME=/oracle/DX1
    PATH=/oracle/DX1/920_64/bin:.:/oracle/DX1:/usr/sap/DX1/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/firefox:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/thunderbird:/opt/sentinel/bin:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/ignite/bin:/opt/hpvm/bin:/opt/aCC/bin:/opt/cadvise/bin:/opt/networker/bin
    MAIL=/var/mail/oradx1
    SHELL=/bin/csh
    TZ=MET-1METDST
    SSH_CLIENT=10.115.4.54 1530 22
    SSH_CONNECTION=10.115.4.54 1530 45.220.20.234 22
    SSH_TTY=/dev/pts/1
    TERM=xterm
    SFTP_UMASK=
    SFTP_PERMIT_CHMOD=1
    SFTP_PERMIT_CHOWN=1
    COLUMNS=158
    LINES=61
    MANPATH=/usr/share/man/%L:/usr/share/man:/usr/contrib/man/%L:/usr/contrib/man:/usr/local/man/%L:/usr/local/man:/opt/VRTS/vxfs5.0/man:/opt/ldapux/share/man/%L:/opt/ldapux/share/man:/opt/ipf/man:/opt/ldapux/ypldapd/man:/opt/samba/man:/opt/samba/WTEC_Support_Tools/man:/opt/samba/cfsm_man:/opt/cifsclient/share/man:/opt/openssl/man:/opt/openssl/prngd/man:/opt/wbem/share/man:/opt/graphics/common/man:/opt/amgr/man/%L:/opt/amgr/man:/opt/sec_mgmt/share/man:/opt/caliper/man/%L:/opt/caliper/man:/opt/drd/share/man/%L:/opt/drd/share/man:/opt/dsau/man:/opt/resmon/share/man/%L:/opt/resmon/share/man:/opt/gnome/man:/opt/perf/man/%L:/opt/perf/man:/opt/propplus/share/man:/usr/contrib/kwdb/share/man:/opt/perl_32/man:/opt/perl_64/man:/opt/prm/man/%L:/opt/prm/man:/opt/psb/healthtest/share/man:/opt/sfm/share/man:/opt/swm/share/man/%L:/opt/swm/share/man:/opt/swa/share/man/%L:/opt/swa/share/man:/opt/ssh/share/man:/opt/sentinel/man/%L:/opt/sentinel/man:/opt/langtools/share/man/%L:/opt/langtools/share/man:/opt/wlm/share/man/%L:/opt/wlm/share/man:/opt/openssl/fips/0.9.7/man:/opt/openssl/fips/0.9.8/man:/opt/gwlm/man/%L:/opt/gwlm/man:/opt/icod/man/%L:/opt/icod/man:/opt/ignite/share/man/%L:/opt/ignite/share/man:/opt/iexpress/tcpdump/man:/opt/iexpress/lsof/man:/opt/iexpress/curl/man:/opt/iexpress/sudo/man:/opt/iexpress/zlib/share/man:/opt/hpvm/share/man/%L:/opt/aCC/share/man/%L:/opt/aCC/share/man:/opt/cadvise/share/man/%L:/opt/cadvise/share/man:/opt/imake/man:/opt/networker/man
    SAPSYSTEMNAME=DX1
    DIR_LIBRARY=/usr/sap/DX1/SYS/exe/run
    SHLIB_PATH=/usr/sap/DX1/SYS/exe/run
    THREAD=NOPS
    dbms_type=ORA
    dbs_ora_tnsname=DX1
    dbs_ora_schema=SAPDX1
    ORACLE_PSRV=DX1
    ORACLE_SID=DX1
    DB_SID=DX1
    ORACLE_HOME=/oracle/DX1/920_64
    ORACLE_BASE=/oracle
    ORA_NLS33=/oracle/DX1/920_64/ocommon/nls/admin/data
    NLS_LANG=AMERICAN_AMERICA.UTF8
    SAPDATA_HOME=/oracle/DX1
    More over I am installing database instance using root.
    let me focus more on error point.
    Error is triggering at " create oracle database" step before to this step all steps are completed successfully.
    Can anyone help to solve this issue.

  • SAP 4.7EE SR1 200Relase - CJS-00030  Assertion failed Argument listenerOraT

    Hi All,
    I am installing SAP 4.7EE 200 release on HP UX 11.23, JDK 1.4.2_12 on oracle 10g.
    I have sucessfully installed DB using RUNINSTALLER, CI and while installing DB Instance installation i am getting error at Oracle net configuration step.
    Log file shows
    ERROR      2009-02-04 22:35:49 [iaxxinscbk.cpp:289]
               abortInstallation
    CJS-00030  Assertion failed: OraNetworkConfigurator.doServerNetworkConfiguration: Argument listenerOraTemplate must point to an existing file.
    I tried to configure the listener manually using netmgr but also no luck.
    Is there any work around on this.
    Mahesh

    Hi Marqus,
    I have stuck in the ABAP Import phase. I am getting the error in the utmost all the all the log files. I am not getting any clue on this. It saying the files are corrupted. Please check the log file ..
    DbSl Trace: my_free: failed to free memory, invalid address 60000000008e9be8 for this i have followed the SAP Note 837410.  I have upgrade kernel to 221 patch level.
    But for this error
    DbSl Trace: ORA-1403 when accessing table SAPUSER..
    I have checked this link
    http://www.uber-goober.com/forums/showthread.php?t=108838
    I have checked the SAP Note  455195 & 709389 but no luck.
    But it seems to be i have to again reload the Export DVDs..
    Please suggest how to proceed.
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206143252
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -ctf I /mysapdump/ExportDVDS/51030431_4_export/DATA/SAPRSEUI.STR /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/DDLORA.TPL /tmp/s
    apinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.TSK ORA -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.log
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206143252
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206143302
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -ctf I /mysapdump/ExportDVDS/51030431_4_export/DATA/SAPRSEUI.STR /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/DDLORA.TPL /tmp/s
    apinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.TSK ORA -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.log
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206143302
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206170853
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    (DB) INFO: RSEUINC created
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206170924
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    (TSK) ERROR: file /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.TSK.bck already seems to exist
                 a previous run may not have been finished cleanly
                 file /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.TSK possibly corrupted
    /sapmnt/R4U/exe/R3load: job finished with 1 error(s)
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206170924
    (IMP) INFO: import of RSEUINC completed (1207692 rows)
    (DB) INFO: RSEUINC~0 created
    (DB) INFO: RSEUINC~1 created
    DbSl Trace: my_free: failed to free memory, invalid address 60000000008e9be8
    DbSl Trace: my_free: failed to free memory, invalid address 6000000000da08e8
    (DB) INFO: disconnected from DB
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206171106
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206175801
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206175801
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    DbSl Trace: my_free: failed to free memory, invalid address 60000000008e9be8
    (DB) INFO: disconnected from DB
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206175801
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    DbSl Trace: my_free: failed to free memory, invalid address 60000000008e9be8
    (DB) INFO: disconnected from DB
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206175801
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206191435
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    /sapmnt/R4U/exe/R3load: START OF LOG: 20090206191435
    /sapmnt/R4U/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/R4U/exe/R3load: version R6.40/V1.4
    /sapmnt/R4U/exe/R3load -dbcodepage 1100 -i /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.cmd -l /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/N
    UC/DB/SAPRSEUI.log -stop_on_error
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    (TSK) ERROR: Unable to rename /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEUI.TSK to /tmp/sapinst_instdir/R3E47X2/SYSTEM/ABAP/ORA/NUC/DB/SAPRSEU
    I.TSK.bck
    (TSK) ERROR: OS error message: No such file or directory
    /sapmnt/R4U/exe/R3load: job finished with 1 error(s)
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206191436
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    DbSl Trace: my_free: failed to free memory, invalid address 60000000008e9be8
    (DB) INFO: disconnected from DB
    /sapmnt/R4U/exe/R3load: job completed
    /sapmnt/R4U/exe/R3load: END OF LOG: 20090206191436

  • SAP Install Error: CJS-00030 Assertion failed:Component OraDatabaseTablespa

    I am installing SAP ECC 6.0 IDES central system on RHEL4 x86_64 bit with Oracle 10g.
    Oracle db installation and create database steps have completed successfully. It is now on "Create/Check Tablespaces" of SAP installation and came across an error.
    Below, please see the last few lines of sapinst.log showing the error message.
    INFO 2008-12-24 13:20:18
    Account oram1s already exists.
    INFO 2008-12-24 13:20:18
    Account dba already exists.
    ERROR 2008-12-24 13:20:18
    CJS-00030  Assertion failed: Component OraDatabaseTablespaces2: Context parameter templateDirectory is not valid. The follo
    wing files are missing: TABLESPACES.XML
    ERROR 2008-12-24 13:20:18
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2008-12-24 13:20:18
    FCO-00011  The step checkStepPreconditions with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|
    1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|
    ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraTablespace2|ind|ind|ind|ind|6|0|checkStepPreconditions was execut
    ed with status ERROR .
    Can anyone please guide or help me resolve this issue?
    Appreciate your help!
    thanks,
    Dhimant

    Markus,
    thanks for your quick response. However, I am curious to know what could be the problem. Please let me describe briefly what I have done so far.
    - Started with ./sapinst and went thru choose service, define parameters, check parameters steps
    - It prompted me to enter SolMan key, done.
    - It stoped here and prompted me to login as oram1s and start Oracle installation by executing /oracle/stage/102_64/database/SAP/RUNINSTALLER. done.
    - After completion of Oracle 10.2.0.1.0 installation, ran orainstRoot.sh  and root.sh as root. done.
    - SAP install manual suggests to apply Oracle patch set. Since I had downloaded 51031811 Oracle patch dvd from market place, I executed /sapsoftware/extract/51031811/DVD_ORACLE_10.2.0.2_Patches_LINUX/LINUX_X86_64/Disk1/runInstaller. It completed successfully so assume it applied Oracle 10g R2 patch set 1.
    - Now, I went back to sapinstall session and continued from there on.
    - It went thru a couple phases and "create database" and then came across this issue in "Create/Check tablespaces"
    NOTE: I came across few other issues in between so followed proper resolution for those and moved on.
    Have I missed something or done a mistake somewhere?
    As always, appreciate your help!
    thanks,
    Dhimant

  • Tracking the order of execution of sql scripts in SQL*Plus

    In our production environment we sometimes have to run some .sql scripts in a particular order. Since the order of execution is important , i have created another .sql file caller caller.sql(shown at the bottom) which will call all the scripts in the right order.
    i thought of putting a exec DBMS_LOCK.SLEEP (5); after the end of every execution of the script so that i can see the
    'Ending script1'message .
    The spooling within the caller script(execute_stack.log) has become meaningless because each script has a spool <filename.log> and spool off within it. These spool logs (for every script) is important for tracking purposes as each script belongs to a different development team and i have to send them the spooled log file after the execution.
    I don't want to see the entire scripts running by in my screen. Since these scripts have their own spooling, i can later check the logs if the scripts where executed properly.
    So i need two things.
    1.I just need to see the following and nothing else in the screen.
    Ending script1
    Ending script2
    Ending script3
    .2. I need to log the order of execution. ie. the execute_stack.log should look like the above.Since there is a spool off within each script, this wouldn't be possible.Right?
    Ending script1
    Ending script2
    Ending script3
    .The caller.sql script which calls all the scripts in the right order
    alter session set nls_date_format = 'DD-MON-YYYY hh24:MI:SS';
    set serveroutput on
    set echo on;
    set feedback on;
    spool execute_stack.log
    @script1.sql
    exec dbms_output.put_line ('Ending script1');
    dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
    exec DBMS_LOCK.SLEEP (5);
    @script2.sql
    exec dbms_output.put_line ('Ending script2');
    dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
    exec DBMS_LOCK.SLEEP (5);
    @script3.sql
    exec dbms_output.put_line ('Ending script3');
    dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
    exec DBMS_LOCK.SLEEP (5);
    @script4.sql
    dbms_output.put_line(chr(10)||chr(10)||'.'||chr(10)||'.'||chr(10));
    exec dbms_output.put_line ('Ending script3');
    commit;
    spool off;Is this a professional way of tracking the execution of .sql scripts?

    Pete_Sg1 wrote:
    Is this a professional way of tracking the execution of .sql scripts?No. There is very little professional about using .sql scripts on a production system - when stored procedures are safer, more robust, easier managed and controlled and secure.. and where a log table can be used to properly log the runtimes (and other stats) of each processing step.
    Let's just take a look at the number of moving parts you need to schedule and run a .sql script. A cron job needs to be configured with the proper environment setting. It needs to run a shell script. That shell script needs to load SQL*Plus. SQL*Plus needs to connect to the database (starting a dedicated server process most likely). SQL*Plus then needs to read a .sql file, parse these commands and either execute these locally (SQL*Plus commands) or remotely (PL/SQL and SQL commands).
    How can this be considered professional when the very same can be achieved with a
    - stored procedure
    - using DBMS_JOB to schedule the procedure for execution
    There are so many things that can go wrong with the first method. And so few things that could go wrong with the last one. No contest as to which method is not only better, but also professional.
    PS. See that you use Windows to run these scripts. It is even worse as it introduces another hardware and software layer making the scenario even more insecure & unsafe with more moving parts that can go wrong or simply fail.

  • CJS-00081  Assertion failed: in function InstallationScript_212()

    Hi,
    I am trying to install WAS6.4 Sneak-Preview on win2k sp4 (Terminal), J2SE1.4.2_05 and every fresh installation is failing in the "MaxDB Database Installtion" phase with the following error message.
    ERROR 2005-06-13 19:45:56
    CJS-00081  Assertion failed: in function InstallationScript_212() {    var installer = new Installer();    var kdb = new KeyDB();    var context = new Context();    var gui = new Gui();
    Any pointers related to this type of failures would be of GREAT!! Help..
    Thanks in Advance
    Atul

    Thanks for the response sai..
    i managed to resolved this particular issue (it was because one of the NT service was not running)
    However now the Installtion is hanging at one particular point "MaxDB Database Installation" (phase 5) the last few lines in the "sapinst.log" file are as follows:
    installation of MaxDB Webtools finished successfully We, Jun 15, 2005 at 201841
    INFO 2005-06-15 201844
    The service 'XServer' started successfully on host 'Local'.
    INFO 2005-06-15 201852
    The service 'SAPDBWWW' started successfully on host 'Local'.
    INFO 2005-06-15 201859
    Working directory changed to Csapdbprogramspgm.
    INFO 2005-06-15 201859
    Working directory changed to CProgram Filessapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST.
    INFO 2005-06-15 201902
    Working directory changed to Csapdbprogramspgm.
    INFO 2005-06-15 201902
    Working directory changed to CProgram Filessapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST.
    installation of MaxDB Webtools finished successfully We, Jun 15, 2005 at 20:18:41
    INFO 2005-06-15 20:18:44
    The service 'XServer' started successfully on host 'Local'.
    INFO 2005-06-15 20:18:52
    The service 'SAPDBWWW' started successfully on host 'Local'.
    INFO 2005-06-15 20:18:59
    Working directory changed to C:/sapdb/programs/pgm.
    INFO 2005-06-15 20:18:59
    Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    INFO 2005-06-15 20:19:02
    Working directory changed to C:/sapdb/programs/pgm.
    INFO 2005-06-15 20:19:02
    Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
    My current System Configuration is as follows:
    - MS Windows Server 2003 (Enterprise Edition)
    - RAM 1 GB
    - Pentium 4 2.4 Ghz processor
    - 1.4.2_05 J2SE
    And i have used both the Installation currently available on SDN site viz.
    a)SAPinst_SP_WAS640.exe
    b)WebAS640SP9.zip
    I have also tried on m/c having Windows 2000 SP4 OS with 2GB of RAM without any success.
    I even tried options such as "cancelling" the Installation and resuming it later without any success.
    Though the installtion is hanging for MaxDB however it was succefull when tried with MS SQL-Server2000.
    Can somebody provide any pointers in resolving this issue?
    Thanks in advance..
    Atul

  • CJS-00081  Assertion failed: No db client software version available

    Hi Experts,
    I'm doing system copy on Oracle.9.2 and SAP R/3 Enterprise 4.70 Ext.Set 1.10 SR1 in AIX5L, I haved check Note:659509,
    during run the Installation Master,The Central Instance and Oracle software is installed and when I installing Database instance, the error massage show up as following:
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxhcache.hpp:534]
               CDomainObjectCache::readFromKeyDb(iastring, bool, const iastring &)
    CDomainObjectCache::readFromKeyDb: Reading from tGlobalDbParameters WHERE dbSid = 'PRD'
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
    ERROR      2011-06-25 07:29:41 [iaxxinscbk.cpp:219]
               abortInstallation
    CJS-00081  Assertion failed: No db client software version available in tORA_ClientVersion for client type AIX_64
    have any advice?

    Oracle 9 is out of support. Why are you using this version. You can install R/3 4.7 on Oracle 10g, and as per your problem have you installed oracle through setup.exe or Sapserver.cmd ?
    Regards,
    Subhash

  • How to use views in sql script report?

    All all
    Can any one tell how to use views in sql script report?

    Most of the views are based on tables (or other views which are based on tables).
    The view typically shows one org at a time based on the context that is set.
    If you need records for all orgs, you need to use the underlying tables. Oracle typically names the tables with a _all suffix.
    e.g. PO_HEADERS will show records for one org at a time. PO_HEADERS_ALL will show records for all orgs.
    Hope this answers your question,
    Sandeep Gandhi

  • The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use.  PLease try again later

    The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use.  PLease try again later

    What program are you using?  And what version?

  • TS3276 The IMAP command "UID COPY" (to Deleted Messages) failed for the mailbox "Bulk Mail" with server error: UID COPY Mailbox in use. Please try again later.

    I have been getting the following message and have no idea how to clear it.  Any help will be greatly appreciated!!!  I have force closed Mail, and have tried to re-sync my accounts but no luck.
    The IMAP command “UID COPY” (to Deleted Messages) failed for the mailbox “Bulk Mail” with server error: UID COPY Mailbox in use. Please try again later.

    What program are you using?  And what version?

  • Fail to create SQL query report because of ORA-00923

    Hi expert,
    I would like to SQL query report using the following query:
    select min(identified_date) first_identified,
    max(actual_COMPLETE) last_closed,
    count(id) total_issues,
    sum(decode(status,'Open',1,0)) open_issues,
    sum(decode(status,'Pending',1,0)) pending_issues,
    sum(decode(status,'Resolved',1,0)) closed_issues,
    sum(decode(status,'Will Not Resolve',1,0)) not_resolve_issues,
    sum(decode(status,
    'Open',decode(priority,null,1,0),
    0)) open_no_prior,
    sum(decode(status,
    'Open',decode(priority,1,1,0),
    0)) open_prior_1,
    sum(decode(status,
    'Open',decode(priority,'2',1,0),
    0)) open_prior_2
    sum(decode(status,
    'Open',decode(priority,3,1,0),
    0)) open_prior_3,
    sum(decode(status,
    'Open',decode(priority,'4',1,0),
    0)) open_prior_4,
    sum(decode(status,
    'Open',decode(priority,5,1,0),
    0)) open_prior_5
    from SOFTPROJ_issues
    where project_id = :P83_PROJECT
    However, I got the following error during the steps of creation:
    1 error has occurred
    Query cannot be parsed, please check the syntax of your query. (ORA-00923: FROM¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿)
    I wonder why if it is getting the error because I could create the report with the following query without problems:
    select min(identified_date) first_identified,
    max(actual_COMPLETE) last_closed,
    count(id) total_issues,
    sum(decode(status,'Open',1,0)) open_issues,
    sum(decode(status,'Pending',1,0)) pending_issues,
    sum(decode(status,'Resolved',1,0)) closed_issues,
    sum(decode(status,'Will Not Resolve',1,0)) not_resolve_issues,
    sum(decode(status,
    'Open',decode(priority,null,1,0),
    0)) open_no_prior,
    sum(decode(status,
    'Open',decode(priority,1,1,0),
    0)) open_prior_1,
    sum(decode(status,
    'Open',decode(priority,3,1,0),
    0)) open_prior_3,
    sum(decode(status,
    'Open',decode(priority,5,1,0),
    0)) open_prior_5
    from SOFTPROJ_issues
    where project_id = :P83_PROJECT
    1 error has occurred
    Query cannot be parsed, please check the syntax of your query. (ORA-00923: FROM¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿)
    The difference is to add the followings only:
    sum(decode(status,
    'Open',decode(priority,'2',1,0),
    0)) open_prior_2
    sum(decode(status,
    'Open',decode(priority,'4',1,0),
    0)) open_prior_4,
    Does anyone have any idea to resolve the issue?
    Thanks in advance,
    Rui

    By putting a comma after open_prior_2:
    sum(decode(status,
    'Open',decode(priority,'2',1,0),
    0)) open_prior_2,Sima

  • SQL Server Reporting Services Configuration Error(Subscription)

    I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
    below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
    I also have few questions regarding Configuration;
    What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
    What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
    What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
    Here is the error I am getting in the log file.. 
    ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
    more information., AuthzInitializeContextFromSid: Win32 error: 110;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
    ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True'  as specified in Server system properties.
    ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. See the report server log files for more information.
       at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
       at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
       at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
       at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
       at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
       at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
    ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
       at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
       at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
       at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
       at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
       at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
       --- End of inner exception stack trace ---
       at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
       at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
    secondaryStreamNames)
       at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
       at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
       at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
    I also get following error when I try to create email Subscriptoin
    w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
     Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
    error code 0x6e.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
       at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
       at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
       --- End of inner exception stack trace ---
    Thanks,
    RP

    Hi RP,
    For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
    The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
    In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
     1. Backup the encryption key using Reporting Serivces Configuration Manager.
     2. Change the service account using Reporting Serivces Configuration Manager.
     3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
    For your others questions, please see the following inline reply:
     --What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
     The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
     --What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
     The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
    want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
     --What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
     You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
    For more information, please see:
    Configuring the Report Server Service Account:
    http://msdn.microsoft.com/en-us/library/ms160340.aspx
    Execution Account (Reporting Services Configuration):
    http://msdn.microsoft.com/en-us/library/ms181156.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • Hybrid Connection fails for Windows SQL Server 2014 - SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted

    Hello,
    I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
    Azure Management portal shows the status of Hybrid Connection as established.
    However, the website throws an error when trying to open a connection
    <
    addname="DefaultConnection"
    connectionString="Data
    Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
    providerName="System.Data.SqlClient"
    />
    (The same website, with the same connection string deployed on SQL Server machine works correctly).
    I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
    [Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
    [SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
    I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
    The certificate chain was issued by an authority that is not trusted             
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.            
    Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.                  
    Stack Trace:
    [Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
    [SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
    System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
    System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
    System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
    System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
    System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
    System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
    System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
    System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
    System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
    System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
    System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
    System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
    System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
    System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
    System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
    System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
    System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
    System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
    System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
    System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
    System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
    System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
    System.Data.SqlClient.SqlConnection.Open() +96
    System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
    [EntityException: The underlying provider failed on Open.]
    System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
    System.Data.EntityClient.EntityConnection.Open() +104
    System.Data.Objects.ObjectContext.EnsureConnection() +75
    System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
    System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
    System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
    System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
    CloudShop.Services.ProductsRepository.GetProducts() +216
    CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
    CloudShop.Controllers.HomeController.Index() +1130
    lambda_method(Closure , ControllerBase , Object[] ) +62
    System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
    System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
    System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
    System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
    System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
    System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
    System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
    System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
    System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
    System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
    System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
    System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
    System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
    System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
    System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
    System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
    System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
    System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
    System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
    System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
    System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
    System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
    System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
    System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
    System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213            
    Regards,
    Michal
    Michal Morciniec

    Same issue here, looking for more information !

  • The setup process failed : your setup not started due to unexpected error

    I have Windows 7 / Outlook 2007
    removed all old versions of iCloud
    downloaded it again
    ran setup
    signed on
    selected Calendars / Contacts / Reminders
    Step 1 of 7 started - copied outlook calendar
    Step 2 failed with error message as above
    I have checked on line and iCloud has all of my Reminders and correctly updates to / from my iPad
    Contacts added in iPad and in iCloud don't sync at all
    calendar updates in iPad don't get updated in iCloud neither does it work the other way round

    I found a "solution" in amongst the discussion threads of downloading iCloud v1 which I did and it seems to work now. The issue does indeed seem to be with v2 of iCloud. I'll waste no more time now...
    http://www.tomsguide.com/us/download/Tableau-de-bord-iCloud-Pour-Windows-,0313-4 3841.html
    wher e you can still find v1

  • Failed to open the connection. Details: Unexpected error

    I am trying to run a report which pulls up data from salesforce.com but when I enter the login credentials for salesforce I get this error. I am running Crystal Reports v14.0.2.364 RTM.
    It is not the login as I am able to login with the same credentials (password + security token)
    Any idea?

    I did - but the link provided to download the files is no longer available. I tried to search for the files on internet but no luck. Do you have another location I can download them from?
    Also the same version is working fine on another computer.
    Thank you!

Maybe you are looking for