CKMLCPAVR there is no any process steps in Processing tab

Hi,
I would like to execute CKMLCPAVR. My SAP version is ECC6.3 and no this transaction in menu tree but I still can type the transaction code to execute it.
My problem is that there is no any process steps show out in Processing tab after I gave the plant and settings.
I can't execute these steps such as CKMLCP, My posting period is 10/2011, and initial period is 01/2011.
Could you tell me my version is too old? So the CKMLCPAVR can't work, or not?
thank you very much.

I have activated the EA-FIN and CKMLCPAVR has been shown up at menu tree but the process steps are still empty.
I choosed the posting period 10/2011 and initial period 01/2011 and checked Posting Run, Revaluate Consumption, Relevant for Costing, Provisional Price = L  price for the last cumulation period, Price = Actual price for the period, Legal = 0.
After I set up all these parameter, I turned to the Process Tab and found there is no any prcess steps in this tab.
Do you know what happen?

Similar Messages

  • No repeat option available for the process step in process chain

    If the process chain failed at the ODS activation level, generally the repeat option will be available for activation and to continue the next step. But in some cases the repeat option will not be available for the process step.
    Is there any process to get the repeat option in the process chain?

    You can change this in RSPC > Settings > Maintain process types > Loading (or process of your interest) > put the check mark for Repeatable.

  • Broadcaster event data change process step in process chain goes on HOLD

    Hi,
    We have a process step of event data change in process chain for a cube. the broadcaster has some settings built on this to send email whenever data updates happent to that cube.
    It was working fine till last week; suddenly the process started going on sleep or hold mode. i ahve tried deleting old process variant and added new one ...still  the job hangs.
    Also in SOST i can see that the email based on broadcaster setting were sent. Though users havent recieved any. the job logs in SM37 say:
    Job started
    Step 001 started (program RSPROCESS, variant &0000000518457, user ID BIWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCAST4E9S51L2EFE7AXG4IFUKNJW3W with ID 01462600
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCAST4E9S51L2EFE7AXG4IFUKNJW3W with ID 01462601
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    but when i see the job mentioned in this failed step:
    Job started
    Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000001419141, user ID KRANTUL1)
    Precalculation: initialization started
    Precalculation: processing started
    Precalculate data (fill DataStore)
    Processing data provider DP, query CP_NORDIC_IAN023
    Processing data provider GR4Broadcaster, query
    Calculate documents (build documents)
    Start Precalculation Web Templates with Precalculated Data
    Implementing settings finished
    Precalculation: initialization started
    Precalculation: processing started
    Precalculate data (fill DataStore)
    Processing data provider DP, query CP_NORDIC_IAN017
    Processing data provider GR4Broadcaster, query
    Calculate documents (build documents)
    Start Precalculation Web Templates with Precalculated Data
    Implementing settings finished
    Job finished
    So the users should have recieved the email . we have separately tested sending out emails and it works fine. just that process in process chain doesnt get completed at all.
    the slg1 logs are all successful.
    any pointers what could be wrong ?

    Use process the INTERRUPT if the last precalculation and alert messaging are succesful. Guess it is looping with first precalucatation

  • There aren't any 'x' on the tabs so that i can close them. how do u close individual tabs without restarting firefox?

    there aren't any "x's" on the tabs so that i can close them. how do u close individual tabs without restarting firefox?

    Why not just... put an X on it?

  • PSA Deletion Process failed in Process Chain

    Hi..I have a bizzarre issue...
    I have created one process step in Process chain for deletion of PSA data of a particulur data source(o days).Every setting is fine.
    Except for it fails and gives message:
    Data inconsistency; Partition /BIC/B0001723000 not deleted
    Then I do the repeat in Process Chain and it completes successfully.
    Can anybody throw some light??

    Hi,
    Go to se14 and adjust it - /BIC/B0001723000
    thats it,
    Best regards,
    dushyant.

  • Is there any way to execute process chain from the portal?

    Hello,
    Is there any way to execute process chain from the portal? I dont want to link process chain with any of report. I want to have a button in some of portal folders. User presses the button and it executes the process chain.
    I was thinking about to create a fake planning cube, aggregation level and planning function. I call FM within the Fox planning function that runs the process chain. But it should be done within the report.
    Any ideas?
    Thanks a lot in advance!

    Hi.
    I want to have a button in some of portal folders
    You mean that you want to use some link in EP ?
    Regards.

  • On SharePoint side - other than enabling Kerberos at web application level - is there any other step needed? What?

    Hi there
    My Network guy says that he has taken all necessary steps to roll out Kerberos.
    In the scope of SharePoint - I have extended our web application and this has Kerberos enabled (instead of NTLM). <-- Other than this any more steps are needed on SharePoint side? Which ones?
    Thank you so much.

    Microsoft has released the Kerberos configuration guide : http://www.microsoft.com/en-us/download/details.aspx?id=23176
    note: it's long... 100 pages long.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? Thanks.

    Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? This is for my boss.
    Please let me know. Thanks in advance.

    Simple answer is YES.
    The only caviat is for instance in the UK some iPads are locked to a specific network provider and therefore if the new iPad is locked then it will only work on the specific network it is locked to.

  • Ipad camera and ipad settings hacked I to while playing facebook game yoville on photon browser, I turned off the Internet and changed passwords to complicated for and reset my ipad but is there any other steps I need to take?

    Last night I was playing yoville game on my ipad using photon browser, I had a person that was playing the game sending me messages harassing me tellingmeijust exactly what I was wearing and what I look like he hacked I to my ipad camera from facebook game yoville :( then I saw my ipas setti gs all changed. I e-mailed yoville but have ot recie ed a reply I didn't know people could view my camera from another,ovation without. Me k owing. I turned the Internet off and changed my passwords to complicated ones for settings, and removed the photon browser/and not playing the games anymore I also reset my ipad hoping it would help. After that I have had. My ipad off for 7hours, I need to know if there are any other steps I should take? I can't afford for the apple protection plan yet may r in a couple weeks, I felt horrified. Y camera could me accessed and my privacy was compromised just hope someone can help me thanks.

    My camera turned off after I played yoville.  Had to shut down and turn back on.  fixed now.   Guess it's time to quit Yoville

  • 2 Logical Components for 1 Business Process Step

    Hello All,
    I'm looking for a way to assign in SolMan --> transaction Solar01 - Tab Structure - Business Process Step, 2 logical components for 1 business step. When creating the business step I have to assign 1 specific logical component to this step. Once I have done this I can only select  the chosen logical component ffor SAP Transactions, configuration object etc.. As my business step is running on 2 different systems I need to find a way to link transactions etc. in the step to the different systems. Is there any way to change this for the Level 3 elements, like it is for level 2 (business processes) where I can choose in the different tabs between all the logical components?
    Thanks in advance
    Ramó

    I've seen people use some absolute craziness to get more than three levels. The most extreme being using multiple projects at the highest level (i.e. a project for PTP Accounts Payable). Don't go there.
    I personally like to have 1 transaction per process step. Don't use the transaction tab as another process level, use it to better describe the process step (like all the other tabs are uses). It results in a better understanding of the system as you go forward. To do that I make teams break up things they think are one step (this can take some arm twisting, so hit the gym and maybe take a few judo classes).
    This allows you to use SolMan in more powerful ways. For instance, if you attach development objects to a step with 5 transactions, you cannot tell which transaction is modified by the development object. However, one transaction per node provides you this link. There are other examples, but basically the "where used" button becomes very useful when you have 1 transaction per node.
    Maybe you could provide a specific example of your process and we can think of a better way to collapse it.
    Such as:
    - PTP Non-Merchandise Purchasing
    -- Expense Purchasing
    --- Create Purchase Requisition
    --- Create Purchase Order (Assign Vendor & Price)
    --- Send to Vendor
    --- Post Goods Receipt
    --- Perform LIV
    --- Process Payment
    Some companies have 6 level processes already defined in models and putting it into SolMan can be a pain for sure. Your naming convention is usually the best route.
    regards,
    Jason
    The system role and template work around doesn't apply to your situation.

  • Handling unit process step by step

    Dear All,
    We intend to use handling unit functionality.
    Our FG let's say FG001 gets packed in container.
    I have mapped this as following.
    I have created 'Container' as code with material type VERP- Packaging Material. Maintained the required data in Sales org. tab page.
    I have created packing instruction in POP1 with container as packing material & FG001 as material.
    I have maintained the determination record in POF1 (Frankly I didn't understand the relevance of this step, but did cos has been suggested in several threads.)
    Now I have to perform the packing process of FG001 in HU02.
    But system is throwing me an error as 'No packing instruction could be found for material FG001', message no. VHUPD002.
    I have stuck up there. Kind request you to help me in this, regarding any configuration & processing step, if I am missing.
    Also I am few questions to get clear.
    1. How to maintain the batch no. of packing material 'Container' while creating/ generating HU as my packing material is batch managed, and need to have information in which HU the batch of packing material is utilized.
    2. What happens to the stock statement  (MMBE)of both the materials i.e. FG001 & Container when those are get packed i.e. HU created/ generated.
    Please respond urgently.
    Timely answers will be rewarded.
    Mimiri

    VS,
    Thanks once again.
    You got it right. I was confused as I was unable to understand why packing material is not moving along with the FG material.
    Moreover our packing material is container. Once it is packed container moves from plant to plant & then to final destination.
    As we have to track the movement of the container, it was necessary for us to the have stock statement.
    I am still surprised why standard SAP doesn't support the movement of the packing material along with the contents i.e. FG?
    Now to tackle this, we have thought of a way out.
    We have maintained two material codes for container. one is dummy container and second is main container for which we have to track the goods movement. Both will be having same material type as VERP but only difference is later won't be having packing material type in sales view. So it will act as normal material.
    While creating HU with HU02, both the materials with quantities will be entered in pack material section. Dummy packing material serve as packing material. Here my question is what is HU creation & HU generation? Because system is throwing me an error while generation as 'no packing instruction are there for the material although I have defined determination source in POF1 but when I save the HU with out generating it, system doesn't throw this error
    The HU is getting created but I am unable to enter that HU number in VL01N while creating the delivery. How to do that?
    MImiri

  • Post Processing Steps after Support Package Stack Application

    I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server).  We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems.  We also applied the J2EE stack and appropriate SCA files to the NWDI server.
    After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them).  Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE.  Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files.  We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type.  Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

    I think I'm missing something.  Now I see the code and DC's inside the DTR.  However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them).  Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR.  What things can I look at to determine what I'm missing here?
    Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA.  We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR.  After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws).  When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
    Message was edited by:
            Eric Vota

  • IView Appraisal Document not showing customer process step names.

    the iView "Appraisal Document", after pressing the pushbutton to move to the next process step, shows the text
    "status changed to 'In Review'" in the info area of the iView.
    we have changed the names of the standard process steps using IMG "Define Tabs and Process Configuration for Template"
    for instance we renamed "In Review" to "Progress Tracking".
    the issue is the iView "Appraisal Document" still shows "status changed to 'In Review'" instead of showing "status changed to 'Progress Tacking'".
    note: the names of the steps in the roadmap (on top of the iView) show correctly, it is just that the state transitions "Status changed to..." the names of steps show standard instead of customer steps.
    any idea why?
    Thanks,
    Tiberiu

    Hi,
    My first advice would be to talk to customer out of this.
    As a client using SAP you're using standard software which has predefined 'names' for certain things. The names of appraisal - statuses is one of them.
    (I've never seen a client wanting to adopt the names of menu texts in Microsoft Office and personally I don't seen the difference. Of course, it will take some time for the client to get used to the new names but in a year or two, everybody is used to those terms).
    If you don't succeed, there's no need to change programs. You'll need to change the values of the standard SAP - domain mentioed before.
    Wilfred.

  • Save Hierarchy step in process chain

    Hi All,
    I have a process chain which include the following steps.
    Z* program([for loading multiple hierarchies   |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0d5c74a-8a39-2d10-2d8b-9e1971cb053a]) --> Save hierarchy --> Change run
    In the above scenario, I cannot include a step for the hierarchy save/activate because the hierarchy is not being loaded in this chain through an infopackage.
    And I learned from the [site|http://help.sap.com/saphelp_nw70/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm], that 'Save hierarchy' has to be included after loading the hierarchial data.
    So, is there any procedure for including any step in process chain for activating the hierarchial master data..?
    If I want write a Z* program for activating hierarchial data, which programs/ function modules are used to activate hierarchial master data..?
    Thanks in advance.

    Hi,
    There is an option in the infopackage used to load hierarchy -- to activate upon loading.
    tick that option and remove the hierarchy name from Save hierarchy variant of the process chain.
    Ticking this option will activate your hierarchy automatically after loading.No need to explicitely save it.
    Hope this helps !!
    Regards,
    Yogita.

  • ABC Cycle Counting Process Steps

    We currently want to switch our Cycle Counting by Bin location to ABC Cycle Counting. We want the system automatically generate a list of materials to count daily based on there ABC indicator.
    Our Current Process Steps are as follows:
    Step 1:  LX 26 - Select Items for cycle count
    Step 2:  LI04 – Print the Count sheets
    Step 3:  LI11N – Enter the results
    Step 4:  LX17 – View variance
    Step 5:  LI14 – Create recounts
    Step 6:  LI04 – Print the recount sheets
    Step 7:  LI11N – Enter the results
    Step 8:  LX17 – View variance
    Step 9:  LI20 – Accept Counts & Clear Differences WM
    Step 10:  ZLI21 – Accept Counts & Clear Differences IM
    But when we switch to ABC Cycle counting we can't do the LX26 because that is when you select the bins you want to count. We need the process steps if we use the system to generate the kick off. Any ideas?
    Linda

    1. It is a CO problem - I think your error message is KI235. However you may face this problem if settings are ok but you do not do things properly in IM/WM bookings. Please check these links:
    Re: OKB9
    Account 5248654 requires an assignment to a CO object---Message no. KI235
    Please describe step-by-step (with trx codes) what you did and in which step you get the error message.
    2.
    WM bookings will "never" consume you components (or maybe because a bug...). If you want to consume the components you have to post GI with reference to your PrdOrd (CO11N, CO15, CO27, MIGO, MB1A).
    If you did a booking with mvt 261 in MB1A by mistake, do the reverse booking by mvt 262. That's all.
    If you cannot solve your issue please clarify your problem, step-by-step...
    Regards,
    Csaba

Maybe you are looking for