Class in standard BAdI not impelementing in the Development Server

Hi All,
I have been trying to implement a class in BAdI in Development Sever, yet couldnot find the reason why it is not implementing.
BAdI name - ME_PROCESS_PO_CUST
I have implemented a class in that BAdI. In that class, I have used a method to write the code.
Even when I keep the Breakpoint inside the method and then try to create a PO using ME21N, I was not to call method.
I have activated the class and the method as well.
Suggest me where I went wrong.
Thanks in advance,
Ravi Teja
Edited by: Ravi Teja P on Sep 26, 2011 12:41 PM

Ravi,
If you have created a Classical BADI implementation, then better Go for New Enhancement Implementation for it.
'ME_PROCESS_PO_CUST' is also a Enhancement Spot, hence use se19 to create an Enh Implementation for it, a BADI implementation, an implementing class and code your logic inside the method of your implementing class.
Activate all 4 components and this should be surely triggered.
Regards,
Diwakar

Similar Messages

System went down after this message Client is not known to the mess server

Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
Initially i got following error message 2 times in the system log reading:-
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
After above message I got an information message Continuously 30 minutes in the system log reading:-
Client cinsapp1_PRI_00 is not known to the message serve
Then stoped the workproccess one by one
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
Finally R/3 system was stoped.
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
Ramesh

Hi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan

Problem in WAD (The requested query / does not exist on the current server)

Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyan

Dear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

Your IPad could not activate because the activation server is temporarily unavailable

Hello!
I bought a used Ipad model A1397. Connected it to Itunes and upgraded to 6.1.3.
After that, I can not activate it because it is constantly writes:
"Your IPad could not activate because the activation server is temporarily unavailable. Try connecting IPad to iTunes to activate, or try again in a few minutes." using WiFi and Itunes. The process of restoring the firmware also did not help ...
PS Sorry for my bad English!

Apple is experiencing tevhnical difficulties with APNs
People in Asia reported this 13 hours ago (http://www.sophos.com/ja-jp/support/knowledgebase/119235.aspx) and people in Europe have been tweeting about it for a few hours. Seems like a global issue with Apple. Unfortunetly Apples services page doesnt list APNs: http://www.apple.com/support/systemstatus/
MAybe try a little later

I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideas

Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

ICal could not log into the caldav server

Hi,
I have a OS X Lion server that i am trying to set up for home. I have made an account for myself and have got mail running for it but when I go to turn on Calendars and Reminders, i get the error message iCal could not log into the caldav server "me.com". One I am not sure how this has anything to do with me but anyway, the mail compnent works. Also when i go to the folder webdav via browser servername/webdav/ i get permission denied. I also get and Unathorized message when I try to specifically access the calendar via adress https://servername:8443/calendars/users/username/ I mention the permission denied stuff because i am assuming they are all connected to the Calendar service (ie it runs on caldav which runs on webdav). can anyone help with this as I would like to get this working.

One possiblity is that the user you created has not been granted access to the calendar service. How did you create the user on the server, via Server.app?
Are you able to browse to https://servername:8443/principals/users/username/ (of course substituting the appropriate server and user names)

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

Requested query does not exist on the current server.

Hi All,
I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
Please find the steps below which I did to create a query view in BI 7.0.
1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
Please help me in solving the issue.
Regards,
Phani.

Hi,
I am facing the same problem, though some others of my views can be opened.
We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
My BEx Analyzer Version is:
Support Package 14, Patch 3, Revision 811
Philipp

E2E RCA - The requested query / does not exist on the current server

Hi All,
The RCA for managed system is configured successfully and we are getting EWA for JAVA also.
But when i try to look at the statistics through Workload Analysis it gives error "The requested query / does not exist on the current server" and "unknown or deleted query".
I again tried to run CCMSBI_SETUP_E2E report but the problem STILL persists.
Please let me know what are the other methods i shall try.
Thanks,
Rohan

Hi,
Our solution manager is in EHP1 SP23 and BI content is on 704 SP05.
Firstly the BI was configured in 001 client, we changed it to production client and activated the source system as mentioned in SOLMAN_SETP -> Basic configuration.
Later i found out the there are no queries. I already told to update the BI content and SAP BW patch to SP06.
Do you think it will work?
Thanks and regards,
Rohan

The requested query does not exist on the current server

Hy, i created an workbook an QAs with a query that i have trasported from DEV.
The query exist on QAs system but when open the workbook i receive this error message:'The requested query does not exist on the current server'.
When i select ok, the workbokk is opened correctly because the query exist in system QAs.
How can i remove the initial error message .
Thank's
Andrea
System: BI 7.0
tool BEx version 7.0

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

Error - The requested query does not exist on the current server

Hi all,
We've started to get an error when exeucting queries on our BW system. The erorr is "The requested query does not exist on the current server". Even though I can go in an change the query on the server, I get this message when I try to execute it. I also get the same message when I try to run the query in RSRT.
Has anyone else run into this problem?
Thanks!
~Matt

The problem that we had was due to a pre-query not transported up. We transported up the missing pre-query and everything worked fine. If you go into change mode on the query and press the check button. It should tell you which query is missing.

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

Class in standard BAdI not impelementing in the Development Server

Similar Messages

Maybe you are looking for