ClassCastException is shown in openscript 9.3,which did not exist in 9.2
I created the openscript in 9.2, and it worked fine, after upgrade to 9.3,when run the function "getScript("another_script").callFunction("Test_Function","String_arg")", the follow exception is shown and the script is interrupted.
An unexpected exception occurred in the script. Script section: Run. Caused by: ClassCastException occured. oracle.oats.scripting.modules.basic.api.IterationResult cannot be cast to oracle.oats.scripting.modules.basic.api.ScriptMarkerResult
Anyone can help?
Thanks
Prince
I get the same exception in 9.3 version. Did you solve this problem?
Similar Messages
-
After downloading Lion the noise level of (what I believe to be ) the fans increased. A humming noise which did not exist with Snow Leopard. Any ideas how to reduce this noise?
I have seen this mentioned a dozen times, here, on Lion,and MacRumors.
Nope. Usual suspects.
And whether you tried a clean install instead (backup and erase) and then use MA to import -
Apple TV 2 shows titles which did not exist.
Hello there. My Apple-TV 2 shows titles in a podcast folder which definnitely does not exist as I already deleted them.
Trying to selct them I will get a failure notice that Apple-TV couldn´t load the title which is obvious as I already deleted them.
Then the title will disappear until I need to start iTunes again.
I already deleted the complete podcast folder and installed them again. Result remains the same.
How can I solve the matter ?
Thanks in advance.Found the solution here in the support communities.
-Create a smart playlist.
-Genre = Podcast
-Go into the playlist
-Click on the related Podcast
-Press "shift" + "backspace" on a Windows computer
-Confirm you want to delete the annoying Podcast -
How do i remove my old Apple Id from iPhone's iCloud setting which does not exist anymore
Purchased new iphone 5s, installed with itunes restoring backup from iphone 4 (which was too old a backup). It restored an old apple id (which i do not use anymore) in the iCloud settings while having my new Apple Id in the Itunes & App Store. I cannot turn off the iCloud setting due to old AppleId popping up - which does not exist.. How do i remove the old Apple Id from icloud setting on the phone.
I cannot erase the phone as it asks for the password for the old Apple Id. And i cannot do the restore again (after i made a recent back up my iphone 4) as itunes asks me to turn off Find my phone.The Apple ID exists. The email address you used to create it may not, but the Apple ID does. Call AppleCare and ask to speak to someone in account security.
-
I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following: mount -uw / rm/var/db/.AppleSetupDone shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda MarkleYou did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password. -
I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?
Hi RadarCat16,
Welcome to the Apple Support Communities!
I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
Have a great day,
Joe -
Processes in v$process which do not exist in v$session(help)!!
Hi, all.
The database is 2 node RAC database (10.2.0.2.0)
on 32 bit windows 2003 EE SP1.
Our database is suffering "CKPT hang" from time to time.
I checked v$process and v$session on both node by the following sql.
select addr,pid,spid,username, program
from v$process
where addr not in (select paddr from v$session)
ADDR PID SPID USERNAME PROGRAM
56E2 1 PSEUDO
56E2 18 3984 SYSTEM ORACLE.EXE (D000)
56E2 19 4020 SYSTEM ORACLE.EXE (S000)
56E2 27 3176 SYSTEM ORACLE.EXE (PZ99)
56E3 39 2296 SYSTEM ORACLE.EXE (PZ97)
●select * from v$px_process
SERVER_NAME STATUS PID SPID SID SERIAL#
PZ97 AVAILABLE 39 2296
PZ99 AVAILABLE 27 3176
●select * from V$PX_SESSION
--> no rows
●select slave_name,status from v$pq_slave
SLAVE_NAME STATUS
PZ97 IDLE
PZ99 IDLE
I found the above processes which do not exist in v$session.
Is this normal??
Thanks and Regards.
Message was edited by:
user507290Hi,
>>I can see incomplete checkpoint message in alert log files.
This message indicates that Oracle wants to reuse a redo log file, but the current checkpoint position is still in that log. In this case, Oracle must wait until the checkpoint position passes that log. In fact, the "checkpoint not complete" messages are generated because the logs are switching so fast that the checkpoint associated with the log switch isn't terminated. Oracle stops processing until the checkpoint completes successfully.
In this case, normally you need to increase the size of the redo logs or add more redo log groups. Take a look on http://www.dbazine.com/oracle/or-articles/foot2
Now, as you said that the current redo size is 2 GB, how frequently redo log switch's occurs in the database ? See the SQL's below:
Log Switching Distribution
select to_char(first_time,'DD/MM/YYYY') day,
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'00',1,0)),'999') "00",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'01',1,0)),'999') "01",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'02',1,0)),'999') "02",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'03',1,0)),'999') "03",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'04',1,0)),'999') "04",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'05',1,0)),'999') "05",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'06',1,0)),'999') "06",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'07',1,0)),'999') "07",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'08',1,0)),'999') "08",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'09',1,0)),'999') "09",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'10',1,0)),'999') "10",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'11',1,0)),'999') "11",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'12',1,0)),'999') "12",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'13',1,0)),'999') "13",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'14',1,0)),'999') "14",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'15',1,0)),'999') "15",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'16',1,0)),'999') "16",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'17',1,0)),'999') "17",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'18',1,0)),'999') "18",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'19',1,0)),'999') "19",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'20',1,0)),'999') "20",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'21',1,0)),'999') "21",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'22',1,0)),'999') "22",
to_char(sum(decode(substr(to_char(first_time,'HH24'),1,2),'23',1,0)),'999') "23",
sum(1) "TOTAL_IN_DAY"
from v$log_history
group by to_char(first_time,'DD/MM/YYYY')
order by to_date(day);
Average Switch Time
select to_char(first_time,'DD/MM/YYYY HH24')||':00:00' "Time",
count(*) "Nbswitch",
trunc(60/count(*),1) "Average switch time(minutes)",
count(*)*rsize "EstimateSize"
from v$log_history, (select sum(bytes/1024/1024)/count(*) rsize from v$log)
group by to_char(first_time,'DD/MM/YYYY HH24'),rsize
order by to_date(to_char(first_time,'DD/MM/YYYY HH24'), 'DD/MM/YYYY
HH24')desc;In addition, If you have access on Oracle Metalink, see the Note:147468.1 about Checkpoint Tuning and Troubleshooting Guide.
Cheers -
Entries in Dimension table (Dim Id's) which do not exist in Fact table
Hello all,
We have a strange situation when we run the Report SAP_INFOCUBE_DESIGN. I expected that the Dimension table could have max 100 % compared with Fact tables. However we have a dimension with 587% entries compared with fact tables.
ZOEEMRW /BIC/DZOEEMRW3 rows: 2.416.567 ratio: 587 %
ZOEEMRW /BIC/DZOEEMRW5 rows: 2.464 ratio: 1 %
ZOEEMRW /BIC/DZOEEMRWP rows: 4 ratio: 0 %
ZOEEMRW /BIC/DZOEEMRWT rows: 520 ratio: 0 %
ZOEEMRW /BIC/DZOEEMRWU rows: 18 ratio: 0 %
ZOEEMRW /BIC/EZOEEMRW rows: 399.160 ratio: 97 %
ZOEEMRW /BIC/FZOEEMRW rows: 12.520 ratio: 3 %
Consider dimension /BIC/DZOEEMRW3.
For this Dimension, we could not find an entry in the tables /BIC/EZOEEMRW or /BIC/FZOEEMRW for the following dim idu2019s.
There are many DIM ids which exist in the Dimension table but do not exist in the Fact tables.
Is it normal that this can happen? If so in which cases and is there any way to clean up these entries in the Dimension table which do not exist in the fact table.
Any help or insight on this issue will be appreciated.
Best Regards,
NitinHey,
there is a program with which you can clean up your dimension table. Search forum. But also try RSRV there is a option especially for that.
Backround is that using process chains and you delete data from cube, dimensions are not deleted. So there could be data in the dimension which have no relation to fact table. This is many times discussed in this forum.
Best regards,
Peter -
I downloaded version 4.0.1 and it crashed my system, my Norton no longer works and the Mozilla Firefox browser won't open. I did a system restore, which did not fix it. I tried downloading 4.0.1 again, it freezes when it tries to open "Checking add-on compatibility". What the heck is going on??
When I downloaded new stupid version causing crash my system My Norton gone
after 4 h struggling finally I got it back but only protection I lost my identity safe data witch is very important for me my password can not be verify and I can not fix it I'm so mad I want old version back -
Whne I download iTune, it shows that it will be downloaded to Drive K which does not exist in my computer. It does not allow me to change to other Drives has enough capacity. Then I click change bottom, attempting to change drive, it terminates the download.
Do you have any solutions??Try "Invalid drive X:\" install errors. You should still be able to chose the drive for the download when downloading the installer with a web browser. The iTunes application is installed on the active system drive, usually drive C:.
tt2 -
ok, so i downloaded three albums (sic) and discovered the next day that on two of them there were songs which did not completely download. I quickly reported it and expected a reply within 24 hrs but Ive heard nothing back and now I cannot re-report it because it says Ive already reported it. Should I just wait? It's been three days. Thanks, mj
You can try to contact iTunes Store Support via http://www.apple.com/support/itunes/contact/
Click the big blue button and follow the prompts.
You can also try downloading the songs again. Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519 -
We have forgotten the security code question and each time I request a reset it is being sent to an e-mail addres which does not exist. How can I change the e-mail address to my current e-mail address. We have put money onto an ITunes account which is asking for this security question. This has never happened before. Any assistance would be appreciated. thank you
Hello, covey98.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to us via the link below to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
Need to find out the queries which did not executed in 2014
Hi All,
I need to find out the queries which start from YY and did not executed in 2014, earlier we used to find out by looking into the technical content cube 0TCT_C02 but now its giving dump as number of queries increases. I tried to find out using table RSZCOMPDIR but not able to trace it exactly. Please suggest some alternative solution to find out the queries which did not execute in 2014 so that we can delete it.
Thanks,
Asim.Hi,
RSDDSTAT_OLAP : This is the table which contains query execution details
CALDAY field in that table gives you query execution date
OBJNAM gives the query name
As you said RSZCOMPDIR gives list of all queries. doing a lookup between these tables will identify the queris which are not executed in particular period.
-Sriram -
I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks
A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do? -
Copy functionality which did not copy Long Text values causing us an issue
Two new Master Recipes created in Bathurst by using copy functionality in transaction C201 contained SRC value errors believed to be caused by changes in the copy
functionality which did not copy Long Text values causing us an issue when creating Process Orders. Current workaround is to manually edit the
value fields and re-save the MRs, the issue is then resolved.This will resolve the issue
SAP Note 1452700 - "New" button is disabled after
displaying text
Note Language: English Version: 1 Validity: Valid Since 03/25/2010
Summary
Symptom
In display mode you navigate via the text hyperlink to the text view.
When you navigate back, the "New" button on the "Notes" assignment block is
disabled.
Maybe you are looking for
-
Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized un
-
Get input from user and create a file and run a script in command line.
Hi all, i'm trying to get a input from user and write it into a file named alpe.jacl To get multiple userinputs like address and jobtitle etc etc in the same single window. and the code will save the inputs in alpe.jacl one by one in a new line like
-
Problems with keys and failure to refresh them...
When updating I've got this problem: lib32-libdrm-2.4.50-1-x86_64 98.3 KiB 82.2K/s 00:01 [################################] 100% (167/167) checking keys in keyring [################################] 100% downloading required keys... :: Import PGP key
-
When trying to edit text added with the Add Text option, the hand tool does not select it.
I filled out a form that was not fillable using the Add Text option. Now I need to edit it and was advised to use the Hand Tool to select it. I tried this, and it does not select the text, I see the blue box but cannot put it around the text to edit
-
Distributed Destination in WL 6.1SP5
Hi , I am using WL6.1SP5 and implementing a JMS module where Messages needs to be delievered to all the Servers in the Cluster. This can be easily achieved in Weblogic 7 using Distributed Destination. However Dist. Dest.