ClassCastException when running on invocable task
The following exception has occurred when running a synchronous invocable task, It appears to be internal to Coherence as nowhere in my code am I casting from an Object to a List.
+[2010-03-24 19:14:09.143 +0000] 5945635 [Logger@9264171 3.5.3/465] ERROR Coherence - 2010-03-24 19:14:09.143/5945.921 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:default, member=7): An exception occured while dispatching synchronous event:MapListenerSupport$FilterEvent{DistributedCache$BinaryMap inserted: key=Binary(length=4, value=0x02AE9A42), value=null, synthetic, filters=[null]}+
+[2010-03-24 19:14:09.145 +0000] 5945637 [Logger@9264171 3.5.3/465] ERROR Coherence - 2010-03-24 19:14:09.143/5945.921 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:default, member=7):+
java.lang.ClassCastException: java.lang.Object cannot be cast to java.util.List
at com.tangosol.net.cache.CachingMap.validate(CachingMap.java:1245)
at com.tangosol.net.cache.CachingMap$BackMapListener.onMapEvent(CachingMap.java:1628)
at com.tangosol.util.MultiplexingMapListener.entryInserted(MultiplexingMapListener.java:33)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap$ProxyListener.dispatch(DistributedCache.CDB:22)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap$ProxyListener.entryInserted(DistributedCache.CDB:1)
at com.tangosol.util.MapListenerSupport$WrapperSynchronousListener.entryInserted(MapListenerSupport.java:856)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
at com.tangosol.coherence.component.util.CacheEvent.dispatchSafe(CacheEvent.CDB:14)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.dispatch(DistributedCache.CDB:86)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onMapEvent(DistributedCache.CDB:43)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$MapEvent.onReceived(DistributedCache.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Unknown Source)
+[2010-03-24 19:14:09.145 +0000] 5945637 [Logger@9264171 3.5.3/465] ERROR Coherence - 2010-03-24 19:14:09.143/5945.921 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:default, member=7): (The exception has been logged and execution is continuing.)
The Object returned by the getResult() method of the Invocable is a Map so I really don't see where the List cast is coming from.
Any Ideas?
We have reported the same issue to Coherence support. This started happening in production when we switched to 3.5.3. In fact we get 3 exceptions together.
2010-07-02 05:54:33.477/316855.583 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:DefaultDistributedCache, member=4): (The exception has been logged and execution is continuing.)
2010-07-02 05:54:33.477/316855.583 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:DefaultDistributedCache, member=4):
2010-07-02 05:54:33.477/316855.583 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache:DefaultDistributedCache, member=4): An exception occured while dispatching synchronous event:MapListenerSupport$FilterEvent{DistributedCache$BinaryMap updated: key=Binary(length=31, value=0x061D656E67696E654865617274626561744F7574626F756E64576F726B6572), old value=null, new value=null, filters=[null]}
Similar Messages
-
Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw
Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull -
The code below is a simple powershell statement which enables me to change the execution policy so that I can run powershell scripts. When I run this in a normal windows enviroment the statement will work fine, not giving me an issue whatsoever. However,
whenever it runs in the task sequence the TS fails. I am running this via the command line option in the task sequence, each time running this step as 3 different types of administrators.
powershell.exe -noninteractive Set-ExecutionPolicy -ExecutionPolicy unrestricted
Checking the log file it states this:
Set-ExecutionPolicy : The term 'Set-ExecutionPolicy' is not recognized as the InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
name of a cmdlet, function, script file, or operable program. Check the InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
spelling of the name, or if a path was included, verify that the path is InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
correct and try again. InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
At line:1 char:1 InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ Set-ExecutionPolicy -ExecutionPolicy unrestricted InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ ~~~~~~~~~~~~~~~~~~~ InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ CategoryInfo : ObjectNotFound: (Set-ExecutionPolicy:String) [], InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
CommandNotFoundException InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
+ FullyQualifiedErrorId : CommandNotFoundException InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
InstallSoftware 13/10/2014 17:28:09 3768 (0x0EB8)
Failed to run the action: Script Exception.
Incorrect function. (Error: 00000001; Source: Windows) TSManager 13/10/2014 17:28:09 2716 (0x0A9C)
I am new to both SCCM and Powershell, but from my point of view, this should work, considering that the syntax is not actually incorrect? Please could anyone with any idea drop some hints and tips on how to
stop this issue.I'm not using 3 admin accounts at once if that's how it sounded. I have tried 3 different Admin accounts because I felt that perhaps the difference in permissions may have made a difference in whether I was able to run the syntax and scripts. So I tried
using my own personal administrator account, the SCCMNA account, and the local admin account, which I read worked.
At this point in the task sequence I have:
- Installed the OS
- Connected to the domain
- Installed Applications such as; Flash, Shockware, Reader etc.
Once it has installed the last application within a folder called "Helper Apps" (Which contains various Java and Adobe apps which install fine) it will then run a "Use Toolkit Package" using the MDT toolkit, once this stage is complete
it then progresses to the Script Exception section of the TS.
powershell.exe -noninteractive Set-ExecutionPolicy -ExecutionPolicy unrestricted
I obviously need this to work otherwise I am not allowed to run the script, but because this syntax is "incorrect" it stops the task sequence.
I hope this information might shed some more light on the situation. -
EXECUTE permission denied on sp_sqlagent_log_jobhistory when running a maintenance task or sql job
Hi folks,
I have a scheduled maintenance plan and associated jobs in SQL Server 2008 SP2 that have been working but stopped about two months ago. When I run a maintenance task or sql job using any account (sa, sysadmin-priveleged domain account, etc) I get the following
entries in the SQL Server Agent log (see below). I've tried changing the SQL Server Agent account, applied the latest hotfixes (CU2 for 2008 SP2) and set permissions manually so that the service accounts have dbo access to the msdb database. Anyone got other
ideas? I've avoided recreating the msdb database, but that may be my only option.
Date 4/02/2011 3:42:40 PM
Log SQL Server Agent (Current - 4/02/2011 3:23:00 PM)
Message
[298] SQLServer Error: 229, The EXECUTE permission was denied on the object 'sp_sqlagent_log_jobhistory', database 'msdb', schema 'dbo'. [SQLSTATE 42000] (ConnExecuteCachableOp)
Date 4/02/2011 3:42:40 PM
Log SQL Server Agent (Current - 4/02/2011 3:23:00 PM)
Message
[298] SQLServer Error: 229, The EXECUTE permission was denied on the object 'agent_datetime', database 'msdb', schema 'dbo'. [SQLSTATE 42000] (ConnExecuteCachableOp)
Date 4/02/2011 3:42:40 PM
Log SQL Server Agent (Current - 4/02/2011 3:23:00 PM)
Message
[298] SQLServer Error: 229, The EXECUTE permission was denied on the object 'sp_sqlagent_log_jobhistory', database 'msdb', schema 'dbo'. [SQLSTATE 42000] (ConnExecuteCachableOp)And just to add to the confusion - I created a SQL login called sql-maintjobs and have it sysadmin priveleges. I then logged in to SQL using this account on the instance that is failing and ran the following:
declare
@backupjobid uniqueidentifier
select
@backupjobid=CONVERT(uniqueidentifier,
'2C4974D4-53BE-4E38-8EC0-8F5398CADE88')
exec
sp_sqlagent_log_jobhistory
@job_id = @backupjobid,
@step_id
=1,
@sql_message_id
= 0,
@sql_severity
= 0,
@message
=
NULL,
@run_status
=1,
-- SQLAGENT_EXEC_X code
@run_date
=19900101,
@run_time
=1,
@run_duration
=1,
@operator_id_emailed
= 0,
@operator_id_netsent
= 0,
@operator_id_paged
= 0,
@retries_attempted
=0,
@server
=
NULL,
@session_id
= 0
This sql worked fine - no permission errors at all. That would suggest the account does have permission to EXECUTE that stored procedure... very confusing! -
Error when running the ant task
Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.THi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.T -
Built in package that executes when running a Multi-task
What built-in package(or procedure) runs when executing a multi-task?
I think with the many questions you have on the same issue, the Extensibility Documentation will help a lot.
http://download-uk.oracle.com/docs/cd/B19306_01/em.102/b16246/toc.htm
Also, you can access other EM documents from the menu here:
http://www.oracle.com/pls/db102/portal.portal_db?selected=21 -
I get error code -2147467259 when running VI Logger tasks
I am running VI Logger v1.1 on Windows 2000. I am logging two Analog 0-10V channels with a manual task start/stop. The task was running fine for ~1 month but now displays the follows error after starting the task. Has anyone seen this?
Engine error!
Error code = -2147467259 (0x80004005)
Source = DAQ Writer Write
Description = Error -2147467259 occurred at an unidentified location
Possible reason(s):
LabVIEW: (Hex 0x0x80004005) unspecified errorLook here for solving problem.
RegardsMessage Edited by Indiana on 04-21-2005 08:33 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:36 AM -
Getting Access is Denied when Running Script in OSD Task Sequence
I am attempting put in a script that will move the computer account to the proper OU in AD. I have the script but when it launches inside of the TS I get "CScript Error: Loading script "C:\_SMSTaskSequence\WDPackage\Scripts\MoveOU.vbs" failed
(Access is denied. )."
I am using the Run Command Line, and using the "Run this step as the following account" I have verified that the account has access to do what I need it to do in AD. I have attached the logs as well.
PackageID = 'WI10015A' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
BaseVar = '', ContinueOnError='' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
SwdAction = '0001' InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
Getting linked token InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
failed to get the token information InstallSoftware
3/21/2012 8:46:53 AM 3316 (0x0CF4)
Get RunAs private desktop SMSTS-169042\SMSTSDesktop
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Run command line under a user account InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Found the location for the package _SMSTSWI10015A. The location is on \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Creating a connection to \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\ with default account
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Connection request for "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
No credentials available for connecting to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A". See whether the share has already been connected.
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Connecting to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Successfully connected to "\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A"
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Resolved source to '\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A'
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Command line for extension .exe is "%1" %* InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Set command line: Run command line InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Working dir '\\<SCCMSERVERNAME>\SMSPKGF$\WI10015A'
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Executing command line: Run command line InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Create a process under given user token InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Process completed with exit code 1 InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Microsoft (R) Windows Script Host Version 5.8
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Copyright (C) Microsoft Corporation. All rights reserved.
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
CScript Error: Loading script "C:\_SMSTaskSequence\WDPackage\Scripts\MoveOU.vbs" failed (Access is denied. ).
InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Command line returned 1 InstallSoftware
3/21/2012 8:46:54 AM 3316 (0x0CF4)
Entering ReleaseSource() for \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
reference count 1 for the source \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\ before releasing
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Released the resolved source \\<SCCMSERVERNAME>\SMSPKGF$\WI10015A\
InstallSoftware 3/21/2012 8:46:54 AM
3316 (0x0CF4)
Process completed with exit code 1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Failed to run the action: Move Computer to Correct OU.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Sending status message . . . TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Send a task execution status message SMS_TSExecution_ActionFailError
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
MP server <SCCMSERVERNAME> and port 80. SSL=false. CRL=false.
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Site code: WI1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Client machine name: 1J44KQ1 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Client Identity: GUID:6ffb32d4-1184-4e40-a1c8-26272a707a72
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
Advertisement ID: WI12029D TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Package ID: WI1001E7 TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Sending StatusMessage TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
Formatted header: TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>ABB94CBE-33F4-4EB9-A151-34EE3474A0F9</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2012-03-21T12:46:54Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="4174"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager
3/21/2012 8:46:54 AM 2520 (0x09D8)
CLibSMSMessageWinHttpTransport::Send: URL: <SCCMSERVERNAME>:80 CCM_POST /ccm_system/request
TSManager 3/21/2012 8:46:54 AM
2520 (0x09D8)
The request has succeeded. 200 OK TSManager
3/21/2012 8:46:55 AM 2520 (0x09D8)
Set a global environment variable _SMSTSLastActionRetCode=1
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Clear local default environment TSManager
3/21/2012 8:46:55 AM 2520 (0x09D8)
Let the parent group (Testing) decides whether to continue execution
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
The execution of the group (Testing) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Failed to run the last action: Move Computer to Correct OU. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 3/21/2012 8:46:55 AM
2520 (0x09D8)
Any suggestions would be greatly appreciated!
"You can't fix stupid!"I'm having the exact same issue. I'm using AutoIT for my script to move the computer account. I've tried using ADO, LDAP, and LDAP/ADSystemInfo object. They all fail with access denied. In fact the ADO version of my script fails just
trying to create the "ADODB.Connection" object which I know for a fact doesn't require elevation or administrator access. However, all three versions of the script work correctly when run manually outside the TS. They also work correctly on XP
machines during OSD. Only when deploying a Win7 machine do they fail during the TS. I've tried adding the runas user to the local administrators group beforehand but no dice. Did you have to restart the computer after doing the net localgroup
change? There has to be some other security config in Win7 that is set somewhere doing this. I just can't figure out what. I've even started looking at DCOM/COM permissions to see if something isn't right there.
I don't see why but maybe the script needs to be run locally? Any other ideas? -
Unable to open PDF document when run through task/workflow
Hi all,
I am currently usign a background method to send a smartform as a PDF document to all the agents who approve.
When i send the smartform in mail as a PDF documetn throught the task i get an error message when opening the PDF document which says that 'The file could nto be opened because it was either not a supported file type or because the file was damaged(for example, it was sent as an email attachment and wasn't decoded correectly'.
The below is the code i am using to send the smartform
{ CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZFI_ASSET_PDA_NOTIF'
IMPORTING
fm_name = lv_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.}
{ ls_ctrlop-getotf = 'X'.
ls_ctrlop-no_dialog = ''.
ls_compop-tdnoprev = 'X'.
ls_ctrlop-DEVICE = 'LOCL'.
ls_ctrlop-preview = 'X'.
ls_ctrlop-no_dialog = 'X'.}
CALL FUNCTION lv_form_name
EXPORTING
control_parameters = ls_ctrlop
output_options = ls_compop
user_settings = 'X'
gv_prctr_txt = gv_prctr_txt
gv_cc_text = gv_cc_text
gv_class_txt = gv_class_txt
gv_lname = gv_lname
gv_fname = gv_fname
gv_position = gv_position
gv_initiator = gv_initiator
gv_bookcost = gv_bookcost
gv_bookvalue = gv_bookvalue
gv_date = gv_date
gv_prctr = gv_prctr
gs_anla = gs_anla
gv_emv = gv_emv
gv_cond = gv_cond
gv_operable = gv_operable
gv_action = gv_action
gv_justify = gv_justify
gv_replace = gv_replace
gv_replace_comment = gv_replace_comment
gv_process = gv_process
IMPORTING
job_output_info = lt_job_output
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_job_output-otfdata INTO ls_otf.
lt_otf = ls_otf.
APPEND lt_otf.
CLEAR lt_otf.
ENDLOOP.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
TABLES
otf = lt_otf
lines = lt_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
Fehlerhandling
IF sy-subrc EQ 0.
ENDIF.
LOOP AT lt_tline.
TRANSLATE lt_tline USING '~'.
CONCATENATE ls_buffer lt_tline INTO ls_buffer.
ENDLOOP.
TRANSLATE ls_buffer USING '~'.
append ls_buffer TO lt_objbin.
DATA lv_counter TYPE i.
DO.
lt_record = ls_buffer.
APPEND lt_record.
SHIFT ls_buffer LEFT BY 255 PLACES.
IF ls_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH:
lt_reclist,
lt_objtxt,
lt_objbin,
lt_objpack.
CLEAR ls_objhead.
lt_objbin[] = lt_record[].
lt_objhex[] = lt_record[].
CLEAR lv_descp.
CONCATENATE 'Asset'
gs_anla-anln1
'Approval details'
INTO lv_descp
SEPARATED BY space.
Create Message Body
Title and Description
CONCATENATE 'Please find attached the approval details of asset : '
gs_anla-anln1
INTO lv_mail_descp
SEPARATED BY space .
lt_objtxt = lv_mail_descp.
APPEND lt_objtxt.
CLEAR lv_mail_descp .
appending space lines into text of mail.
DO 3 times.
CLEAR lt_objtxt.
APPEND lt_objtxt .
ENDDo.
CONCATENATE 'This is an automatically generated message.'
'Please do not reply to this mail.'
INTO lv_mail_descp
SEPARATED BY space .
lt_objtxt = lv_mail_descp.
APPEND lt_objtxt.
DESCRIBE TABLE lt_objtxt LINES lv_lines_txt.
READ TABLE lt_objtxt INDEX lv_lines_txt.
ls_doc_chng-obj_name = 'smartform'.
ls_doc_chng-expiry_dat = sy-datum + 10.
ls_doc_chng-obj_descr = lv_descp.
ls_doc_chng-sensitivty = 'F'.
ls_doc_chng-doc_size = ( lv_lines_txt - 1 ) * 255 + STRLEN( lt_objtxt ) .
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = lv_lines_txt.
lt_objpack-doc_type = 'RAW'.
lt_objpack-doc_type = 'TXT'.
APPEND lt_objpack.
Attachment
(pdf-Attachment)
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
DESCRIBE TABLE lt_objbin LINES lv_lines_bin.
READ TABLE lt_objbin INDEX lv_lines_bin.
lt_objpack-doc_size = ( lv_lines_bin - 1 ) * 255 + STRLEN( lt_objbin ) .
lt_objpack-body_num = lv_lines_bin.
lt_objpack-doc_type = 'PDF'.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = lv_descp.
APPEND lt_objpack.
LOOP AT t_mail_addr.
CLEAR lt_reclist.
lt_reclist-receiver = t_mail_addr-mailid.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
ENDLOOP.
IF t_mail_addr[] IS INITIAL.
CLEAR lt_reclist.
lt_reclist-receiver = mail id.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = lt_objpack
object_header = ls_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
CONTENTS_HEX = lt_objbin
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
DATA: l TYPE sy-subrc.
l = sy-subrc.
When i run the above code in Se38, I get an email with a attachment that i am able to open. The problem seems to be with user WF_BATCH.
I have already checked all the existing threads on this. I did this coding as per one of the SDN threads itself.
I am able to open the PDF attachment even when i test the method. The problem is only when it is run through a task/workflow.
Please advice.
Thanks and Regards,
Soumya Gayatri.
Edited by: Soumya Gayatri on Apr 14, 2009 8:40 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:44 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:45 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:47 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:47 PMHello,
You should see an "Edit" in the top right of your post, you can use that to edit it.
As I said, use before and after the coding, but without the spaces (after "{" and before "}" ).
Try it!
Testing:
this is code
regards
Rick Bakker
Hanabi Technology -
Weird data obtained when running Task: AD Group Lookup Recon
Hi,
Im running the scheduled task named: AD Group Lookup Recon
It works. and populates the lookup named Lookup.ADReconciliation.GroupLookup
but when lookin in the design console, the Code Key and the Decode values have weird data ie:
code key: 2~CN=TelnetClients,CN=Users,DC=adtest,DC=com
Decode: ADITResource~CN=TelnetClients,CN=Users,DC=adtest,DC=com
in the code key there is an extra *2~*
in the Decode is an extra ADITResource~
I may think that it is some kind of coding for connector commands used in provision tasks, when I'm trying to provision an OIM user to Active Directory (in the Organization Lookup field) i get this data
this is just one line:
Value: 2~CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=adtest,DC=com
Description: ADITResource~CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=adtest,DC=com
Any Ideas?
Thank You.yes you are right, code key and decode key is because of the coding in the connector to distinguish lookup values coming from multiple IT resources.
If you want to get rid of this [IT Resource~] you will have to modify the connector.
One more thing looks like the base dn you have specified for lookup reconciliation is DC=adtest,DC=com with generic filter thats why you are getting entries like 2~CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=adtest,DC=com which may not be a group you want
Hope this helps,
Sagar -
JAVA_HOME not set when running a task via CRON
On my Solaris 11 server I have created an entry in the root user CRON tab to launch a groovy based application every weekend. The application runs fine under a non-root user. When run by CRON however, the following error message gets emited:
groovy: JAVA_HOME not set and cannot find javac to deduce location, please set JAVA_HOME
Which is weird, as I have the following lines at the end of my /etc/profile file:
JAVA_HOME=/usr/jdk/instances/jdk1.7.0
export JAVA_HOME
GROOVY_HOME=/usr/local/bin/groovy-2.1.3
export GROOVY_HOME
PATH=${PATH}:${GROOVY_HOME}/bin:${JAVA_HOME}/bin
export PATH
Please advice me where to look for the cause of this problem.
Thank you in advance,
DusanI have the following command
/usr/local/bin/groovy-2.1.3/bin/groovy /usr/local/bin/backup/prune_old_backups.groovy
How do I add the JAVA_HOME variable into it?
Thank you,
Dusan -
Runtime Error -GETWA_NOT_ASSIGNED when running COI
Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32995).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
"REDUCE_GOODWILL_ENTRIES"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
in "REDUCE_GOODWILL_ENTRIES".
The main program was "UCUWB000 ".
The termination occurred in line 722 of the source code of the (Include)
program "CL_UC_COI_ACT_PT==============CM00P"
of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
calling the editor 7220).
702 call method do_inv_net_change->create_data_reference
703 exporting
704 i_type = cl_uc_coi_inv_net=>gc_ref_pt_block
705 io_model = do_model
706 importing
707 er_data = lr_t_data.
708 assign lr_t_data->* to <lt_share_block>.
709 call method do_inv_net_change->get_block
710 importing
711 et_pt_shares = <lt_share_block>.
712
713 create data lr_s_data like line of <lt_share_block>.
714 assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716 read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719 assign component 'R_TH_DSH_OLD'
720 of structure <ls_share_block> to <lr_th_dsh_old>.
721 assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>> create data lr_s_data like line of <lt_dsh_old>.
723 assign lr_s_data->* to <ls_dsh_old>.
724 assign component ucf6_cs_coi_fld-pcnt1
725 of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AMOr even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD. -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Error when run page with EJB + ADF
hello
when i run one page with EJB+ ADF give me this error:
<15/Set/2009 17H35m WEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1253032513131' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-7161] (Eclipse Persistence Services - 1.0.2 (Build 20081024)): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Entity class [class valtex.java.ejb.entities.Team] has no primary key specified. It should define either an @Id, @EmbeddedId or an @IdClass. If you have defined PK using any of these annotations then please make sure that you do not have mixed access-type (both fields and properties annotated) in your entity class hierarchy.
at org.eclipse.persistence.exceptions.ValidationException.noPrimaryKeyAnnotationsFound(ValidationException.java:1245)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.validatePrimaryKey(EntityAccessor.java:1173)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.process(EntityAccessor.java:486)
at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.processORMMetadata(MetadataProcessor.java:443)
at org.eclipse.persistence.internal.jpa.deployment.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:303)
Truncated. see log file for complete stacktrace
>
<15/Set/2009 17H35m WEST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application'.>
<15/Set/2009 17H35m WEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-7161] (Eclipse Persistence Services - 1.0.2 (Build 20081024)): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Entity class [class valtex.java.ejb.entities.Team] has no primary key specified. It should define either an @Id, @EmbeddedId or an @IdClass. If you have defined PK using any of these annotations then please make sure that you do not have mixed access-type (both fields and properties annotated) in your entity class hierarchy.
at org.eclipse.persistence.exceptions.ValidationException.noPrimaryKeyAnnotationsFound(ValidationException.java:1245)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.validatePrimaryKey(EntityAccessor.java:1173)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.process(EntityAccessor.java:486)
at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.processORMMetadata(MetadataProcessor.java:443)
at org.eclipse.persistence.internal.jpa.deployment.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:303)
Truncated. see log file for complete stacktrace
>
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
#### Deployment incomplete. #### Sep 15, 2009 5:35:14 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application Application due to error deploying to DefaultServer.
[Application Application stopped and undeployed from Server Instance DefaultServer]
<15/Set/2009 17H43m WEST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
what's means this error???
thanks
Miguel TeixeiraI have a problem when running
the following is the error report
*** Using port 7101 ***
C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Common Files\Nero\Lib\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.07\DEFAUL~1 -Doracle.home=C:\Oracle\MIDDLE~1\JDEVEL~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.07\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.oamprovider_11.1.1 -Dsso.filter.enable=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<23/09/2009 05:20:57 PM COT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<23/09/2009 05:20:58 PM COT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 11.0-b16 from Sun Microsystems Inc.>
<23/09/2009 05:20:59 PM COT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Wed Jun 10 22:24:41 MDT 2009 1227385 >
<23/09/2009 05:21:03 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<23/09/2009 05:21:03 PM COT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<23/09/2009 05:21:03 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:03 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00007. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<23/09/2009 05:21:03 PM COT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<23/09/2009 05:21:11 PM COT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<23/09/2009 05:21:13 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:13 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log00003. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log.>
<23/09/2009 05:21:17 PM COT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<23/09/2009 05:21:17 PM COT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<23/09/2009 05:21:20 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<23/09/2009 05:21:20 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<23/09/2009 05:21:23 PM COT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HR_EJB_JPA_App is not versioned.>
23/09/2009 05:21:23 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Identificador de Aplicación : HR_EJB_JPA_App
23/09/2009 05:21:23 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Servicios de Metadatos: Archivo de metadatos (MAR) no encontrado."
23/09/2009 05:21:23 PM JpsApplicationLifecycleListener Migrate Application Credential Store
ADVERTENCIA: Overwriting credentials is allowed in application credential store migration with Weblogic server running in Development Mode and system property 'jps.app.credential.overwrite.allowed' set to true
[EL Finer]: 2009-09-23 17:21:26.427--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Searching for default mapping file in file:/C:/Users/Administrador/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/HR_EJB_JPA_App/HR_EJB_JPA_App-EJBModel-ejb/
[EL Finer]: 2009-09-23 17:21:26.481--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Searching for default mapping file in file:/C:/Users/Administrador/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/HR_EJB_JPA_App/HR_EJB_JPA_App-EJBModel-ejb/
[EL Config]: 2009-09-23 17:21:26.53--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The access type for the persistent class [class oracle.Departments] is set to [FIELD].
[EL Config]: 2009-09-23 17:21:26.531--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The alias name for the entity class [class oracle.Departments] is being defaulted to: Departments.
[EL Config]: 2009-09-23 17:21:26.531--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The table name for entity [class oracle.Departments] is being defaulted to: DEPARTMENTS.
[EL Config]: 2009-09-23 17:21:26.534--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The access type for the persistent class [class oracle.Employees] is set to [FIELD].
[EL Config]: 2009-09-23 17:21:26.535--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The alias name for the entity class [class oracle.Employees] is being defaulted to: Employees.
[EL Config]: 2009-09-23 17:21:26.535--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The table name for entity [class oracle.Employees] is being defaulted to: EMPLOYEES.
[EL Config]: 2009-09-23 17:21:26.543--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The column name for element [private java.lang.String oracle.Employees.email] is being defaulted to: EMAIL.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The column name for element [private java.lang.Double oracle.Employees.salary] is being defaulted to: SALARY.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Departments.employeesList] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Departments oracle.Employees.departments] is being defaulted to: class oracle.Departments.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Departments oracle.Employees.departments] is being defaulted to: DEPARTMENT_ID.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Employees oracle.Departments.employees] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Employees oracle.Departments.employees] is being defaulted to: EMPLOYEE_ID.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Employees.departmentsList] is being defaulted to: class oracle.Departments.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Employees oracle.Employees.employees] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Employees oracle.Employees.employees] is being defaulted to: EMPLOYEE_ID.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Employees.employeesList] is being defaulted to: class oracle.Employees.
[EL Finer]: 2009-09-23 17:21:26.547--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Class [oracle.Departments] registered to be processed by weaver.
[EL Finer]: 2009-09-23 17:21:26.547--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Class [oracle.Employees] registered to be processed by weaver.
23/09/2009 05:21:34 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Identificador de Aplicación : wsm-pm
23/09/2009 05:21:34 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Servicios de Metadatos: Archivo de metadatos (MAR) no encontrado."
23/09/2009 05:21:38 PM oracle.adf.share.config.ADFConfigFactory getInstance
INFO: ADF Config instance implementation in use is : oracle.adf.share.config.MDSConfigFactory
23/09/2009 05:21:46 PM oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl getNonCachedConnectionsContext
INFO: Registering Connection Runtime MBean
23/09/2009 05:21:46 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
23/09/2009 05:21:47 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
23/09/2009 05:21:47 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
<23/09/2009 05:21:50 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:50 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00006. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<23/09/2009 05:21:50 PM COT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
23/09/2009 05:21:51 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2EE application auditor for componentType=oracle.security.jps.internal.audit.AuditServiceImpl$Auditor@213b6e
23/09/2009 05:21:55 PM oracle.adf.share.config.ADFMDSConfig parseADFConfiguration
INFO: Configuration file:/META-INF/adf-config.xmlcannot not be read by MDS. Reading directly from the classpath
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:246d:98bd:32fc:bf08:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:790b:d0ee:a329:57db:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:28a5:117:3611:5367:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:c0a8:66:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.102:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<23/09/2009 05:21:55 PM COT> <Warning> <Server> <BEA-002611> <Hostname "Crht-PC", maps to multiple IP addresses: 192.168.0.102, fe80:0:0:0:246d:98bd:32fc:bf08%12, fe80:0:0:0:28a5:117:3611:5367%13>
<23/09/2009 05:21:56 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<23/09/2009 05:21:56 PM COT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
[Running application Application9 on Server Instance DefaultServer...]
DefaultServer startup time: 64580 ms.
DefaultServer started.
<23/09/2009 05:22:08 PM COT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Application9 is not versioned.>
23/09/2009 05:22:08 PM JpsApplicationLifecycleListener Migrate Application Credential Store
ADVERTENCIA: Overwriting credentials is allowed in application credential store migration with Weblogic server running in Development Mode and system property 'jps.app.credential.overwrite.allowed' set to true
<23/09/2009 05:22:09 PM COT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1253744528059' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097): org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
at org.eclipse.persistence.exceptions.EntityManagerSetupException.jtaPersistenceUnitInfoMissingJtaDataSource(EntityManagerSetupException.java:154)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:798)
at org.eclipse.persistence.jpa.PersistenceProvider.createContainerEntityManagerFactory(PersistenceProvider.java:216)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:343)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:323)
Truncated. see log file for complete stacktrace
>
<23/09/2009 05:22:09 PM COT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application9'.>
<23/09/2009 05:22:09 PM COT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097): org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
at org.eclipse.persistence.exceptions.EntityManagerSetupException.jtaPersistenceUnitInfoMissingJtaDataSource(EntityManagerSetupException.java:154)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:798)
at org.eclipse.persistence.jpa.PersistenceProvider.createContainerEntityManagerFactory(PersistenceProvider.java:216)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:343)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:323)
Truncated. see log file for complete stacktrace
>
[05:22:09 PM] Weblogic Server Exception: weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
[05:22:09 PM] Caused by: java.lang.Throwable: Substituted for missing class Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097) - org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
[05:22:09 PM] See server logs or server console for more details.
oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed[05:22:10 PM] #### Deployment incomplete. ####
oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:341)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:235)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:442)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$6$1.run(AdrsStarter.java:1469)
Caused by: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:483)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:332)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:465)
... 12 more
#### Cannot run application Application9 due to error deploying to DefaultServer.
[Application Application9 stopped and undeployed from Server Instance DefaultServer]
Please help me!!
thnks!! -
Error when running VI logger 2.01 with MX driver
Hi,
When I run a VI task , the following message from Task Validation shows up:
Database does not exist in the specified path.
I have reinstalled the software, but it want fix the problem.
How do I solve this problem?
Do I need the full vers. of VI logger, to run and log data?
Do I need the Citadel database installed ? Where do I finde the Citadel database? What CD? I have the full NI Academic software.
Please help me!!!
I'm LOST.
S.
Tævje
[email protected]Look here for solving problem.
RegardsMessage Edited by Indiana on 04-21-2005 08:33 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:36 AM
Maybe you are looking for
-
After downloading the new update to Firefox I cannot get Firefox to respond. The only way I can use Firefox is in Safe Mode. == This happened == Every time Firefox opened == I updated to new version of Firefox
-
Macbook Pro running extremely slow since updating to Yosemite
Hello All, I am new to the community and I'm hoping your pooled expertise can assist me with my issues. I went ahead and posted the results of my diagnostic scan below. My main concerns are that my Macbook Pro is now extremely slow after OSX updates.
-
On new MB (Blackbook with 2 GB RAM) video plays back OK in QT until I click mouse / trackpad on screen over the playback - restart only when I click the start arrow in QT also some jerkinesss on the Get a Mac ads - Is tis due to the poor graphics car
-
Mac Mail keeps crashing on Mountain Lion.. Have tried everything!
Hey, So I kept getting this annoying pop up when I first started using mountian lion about a password for an old email addy. Being dumb and letting my impatience get the best of me I went into the Mail "Preferences" folder and deleted the playlist or
-
Dear All, Whenever i connect this phone to PC using Mass storage mode it shows the drive but when i open it, it says "please insert in drive..." or when i check drive properties, it says Size availble as 0 and used also as 0. In short, it is not dete