Classic and Classic Applications

When Tiger is on, Classic start ok, but after some minutes that I use Office 98 (upgraded for 9,0) or File Maker, these crashs and I need to close applications and restart Classic.
So if I need to use Office or File Maker I must start from secon HD with OS 9,2 and work with it !! Incredible!
Have you some suggestions?
Thank in advance.
Claudio

Claudio, the only real cue here is "if I need to use Office or File Maker I must start from secon HD with OS 9,2 and work with it…"
Are you really saying that if you boot from pure OS 9, all your work with Office or File Maker goes smoothly; there are no problems at all? Or do some of the problems still occur?
I don't think you should be getting crashees, but if most of your work is with Office or File Maker, you should seriously consider not just dowloading little updates but upgrading your main versions. Office 98 and File Maker 3 are both years and several versions out of date and you might expect either of them to have problems with pure 9.2.2, unless you use them solo with nothing else running at the same time…
Similarly if you must use archaic versions, I would consider buying a second Mac. Another G4 AGP would cost hardly more than pocket change somewhere like e-Bay…
If you really can't do either of those, do you see crashes when you use only Filemaker or only one Office application, with nothing else running?
Using only Filemaker or only one Office application, do you see crashes when you use only new documents?
Do you see problems with any and all documents, or only some group of documents - perhaps all made from the same template, or all referencing the same linked files, or all using the same features?

Similar Messages

  • Pros and cons of EPM and Classic Application.

    Hi All Experts,
    can any one tell me what are the pros and cons if create EPM Application
    and pros and cons if we create Classic Planning Application
    this is really urgent we have to submit this to our client as soon as possible

    Hi,
    The main difference between using of classic and EPMA is I think hidden in the first letter of EPMA. EPMA is for Enterprises where multiple performance management applications are considered applicable. When you have an HFM application, a planning application, a performance scorecard application, a couple of essbase cubes around and lots of reports pulling data from all these, sharing data and metadata becomes crucially important. And no mistake, classic planning is as good as EPMA planning and easier to handle, however, if your company or client is thinking of having a total EPM solution in place, then EPMA is the right choice. However, since you can always convert your classic app to EPMA but you've got only one bullet to fire, it might be wise to stick with classic application until your client/company starts imagining that sort of ambitious goal.
    Cheers,
    Alp

  • Difference between Classic Planning and EPMA Application

    Hi All,
    We are currently working Hyperion Planning version 9.3.1 and we do use Classic Planning Administration. We are in the phase of upgrading to version 11.1.2 and thinking of using Enterprise Performance Management Architecture to work with applications . Kindly let me the difference between Classic Planning and EPMA Application and its cosequences on upgradation.
    Thanks in advance

    Instead of explaining it all again here are some posts around the same subject
    Re: what is the Differenc between Classic Planning and EPMA
    Hyperion Planning - Classic Administration vs EPMA ....
    Re: The advantage of using EPMA?
    EPMA compare to Classic
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while creating Classic Application

    Hi All,
    While creating classic application through Application wizard i am facing a error "An error occured while processing this page. Please check the logs." I am getting this error when i click 'Finish' on last page. Both the Oracle and Essbase Connections are fine and validated. Any idea for this error? Where i can check the logs as suggested in error message?
    I am using the version 11.1.2
    Thanks a lot
    Edited by: Ashu on Jun 15, 2011 10:42 PM

    If on windows have a look in <MIDDLEWARE_HOME>/user_projects/epmsystem1/diagnostics/logs/services
    There will be two planning log files.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Access is denied  while creation hfm classic application in workspace

    access is denied while creation hfm classic application in workspace. i have given full roles and access to my admin user. still i am facing same issue.
    i am trying to create classic application workspace under
    Access is denied.
    Access is denied.
    Show Details:
    Error Reference Number: {401A779B-3846-4645-852B-D036AF74C7DA}
    Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 1087;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 1;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 768;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHsxClient.cpp;Line: 3430;Ver: 9.3.1.0.1502;
    Num: 0x80070005;Type: 0;DTime: 9/26/2008 7:10:10 PM;Svr: KOTHRUD;File: CHFMwManageApplications.cpp;Line: 2152;Ver: 9.3.1.0.1502;

    Hello,
    Do you have the HFM ADM drivers installed on the workspace server -- I believe if you do not have those installed then you are going to have some issues.
    Regards,
    -John

  • Help! Why do my Classic applications refuse to run?

    I don't know if this is the best forum for this problem but hopefully someone here will either be able to help me or tell me where I can look for help. I have been using Classic mode with my G5 to run Microsoft FrontPage, which I use for my website. For the last 8 months everything worked fine, but recently I have encountered some problems that I don't know how to deal with. When I try to launch Frontpage Explorer I get the message "server timed out". If I try to go straight to Editor I can open individual pages, but when I try to save the page I get the message "out of memory". At that point I not only have to save the page without changes, but the page is then erased!
    I have tried the following. First I removed the OS9 system folder from the G5. Then I removed the FrontPage application. I shut down the computer and after restarting I reinstalled the OS9 folder and the FrontPage app. However, the results are identical. Fortunately I have the web pages backed up in several locations so I have not yet lost any data, but I am no longer able to update my website, which is a critical part of my business.
    Does anyone have any ideas for anyting else I can try? Could this be some sort of virus? Everything else seems to work fine, only my Classic application has been affected.
    G5 2.0   Mac OS X (10.4.8)  

    Another "symptom" to report. I decided to use my old G3 that also has Frontpage installed to update my site. But I got the exact same error messages! I even booted the G3 in OS9, but still was unable to launch Frontpage; or to be more accurate I was unable to get Frontpage to open up my web pages.
    I thought that perhaps the number of webpages I had stored was too much for Frontpage to handle, so I moved ~90% of the pages to a separate folder and then put the folder in a different hard drive. No luck, same results.
    I did try rebuilding the desktop on both the G3 and G5, but it made no difference. Any suggestions will be very gratefully accepted!
    G5 2.0 Mac OS X (10.4.8)

  • Unable to see Planning Classic Application Administration 11.1.1.3

    Hi Gurus,
    I successfully installed full suit of Hyperion 11.1.1.3
    When I go to workspace I can see Classic Application Administration for Consolidation, but I cannot see Classic Application Administration for Planning.
    I re-configured planning as well but same result.
    I am able to open EPMA dimension library, essbase and all rest of the products.
    Does anybody have an idea why is it happening.
    Thanks..........

    Hi,
    I got the solution. We need to re-configure web server under workspace and restart workspace & planning service.

  • Hyperion HFM Classic Applications not showing up in Calcuation Manager

    Hello,
    11.1.2.2
    HFM Classic applications are not showing up in Calculation
    Manager.
    The following error is generated…
    "There was an error retrieving the list of classic applications. Please see the Calculation Manager log for more information"
    I see in the log
    Excerpt from log…
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP:
    CALC#11.1.2.0] [SRC_METHOD: logInfoMsg] The custom error module does not recognize this error.
    [2013-08-08T17:01:11.981-04:00] [CalcMgr0] [WARNING]
    [EPMCAL-00002] [oracle.bi.bifndnepm.calcmgr.common.GenericLogger] [tid: 21]
    [userId: <anonymous>] [ecid: 0000K1VidTD5UcG6yzbe6G1I0iTy0000Ok,0] [SRC_CLASS:
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP: CALC#11.1.2.0] [SRC_METHOD:
    log] Exiting com.hyperion.calcmgr.provider.hfm.HFMProvider.getApplications
    73311
    [2013-08-08T17:01:12.288-04:00] [CalcMgr0] [NOTIFICATION] []
    [oracle.bi.bifndnepm.calcmgr.common.GenericLogger] [tid: 21] [userId:
    <anonymous>] [ecid: 0000K1VidTD5UcG6yzbe6G1I0iTy0000Ok,0] [SRC_CLASS:
    com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP: CALC#11.1.2.0] [SRC_METHOD:
    logInfoMsg] Global role
    for user: srecine is ADMINISTRATOR
    Note: the user is fully provisioned for all HFM applications, however, they do not show up in Calc Mgr.
    There was a known issue in 11.1.2.1 where a patch fixed this issue, however, this is 11.1.2.2 and I see no applicable patch.
    any ideas where to go from here?
    Joe Orgill

    Yes the issue in 11.1.2.1 should be fixed in 11.1.2.2
    The 11.1.2.2 Readme has it in the list of defects fixed:
    12421352 - You cannot select Financial Management Classic applications from Oracle Hyperion Calculation Manager.
    It may be worth logging with Oracle is you believe the configuration is correct.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Change memory for classic application from 10.3.9

    PowerBook G4 Sys 10.3.9
    Changing memory alloted to aplication...
    Normally I'd quite the app, highlight it's icon, hit "command-i"
    and change memory in the dialog box that pops up.
    However this classic app give me the correct dialog box without my
    being able to highlight minimum and preferred memory amounts.
    The only change I've made since installing classic application
    on this mac i bought used is to make myself "admin"
    and deleted old admin after creating my own password.
    Should I reinstall classic application? (Virtus Walkthru Pro2.0)
    An oldie but a goodie very important to us.
    Or is there some simple fix I'm overlooking?
    Thanks
    Powerbook G4   Mac OS X (10.3.9)   512 MB SDRAM

    Hi, Gregor, and welcome to Apple Discussions. Wow! I haven't heard anyone mention WalkThru Pro in at least five or six years. I used it to "pre-build" a total reconstruction of my house back in 1995, so my wife could see what it was going to look and feel like, inside and out. Darned if the house doesn't look and feel just like the model did (or better), so I'm still happily married. But WTP has been retired since then. It paid for itself dozens of times over, in a single use!
    Are you certain that the icon on which you Got Info was the application itself, and not an alias? If that isn't the issue, then yes, it would be worth reinstalling WTP to make sure you have appropriate permissions to tinker with it.

  • Classic Application Administration vs. Administration within the workspace

    Can someone tell me the Pros and Cons of Classic Application Administration vs Administering the App from the Workspace?
    We have always used Classic and I would like to know if it would be worth the effort to convert over.

    Workspace admin features, or EPM Architect, is certainly the future direction. The windows based metadata manager is on the sunset trail in terms of new features being added. That said there are still some things that need to be ironed out in certain areas. I would recommend building this into your dev plans and carefully evaluating before migrating to your production efforts. One impetus for moving straight to the EPMA platform was to take advantage of the new graphical calculation manager interface for building rules in HFM rather than using the VB script editor. This need will be gone with the release later this summer where you will be able to use the Calc Manager with both CLassis and EPMA applications. So I would definately prepare yourself, but tread lightly for now.

  • Running "Classic Application" in Mac OS X v10.6.2 Snow Leopard

    Hello, I'm trying to run a Classic Application on Mac OS X v10.6.2 Snow Leopard... goes by the name of "Titanic Adventure Out of Time." When I go to install it I get the message "You can't open the application Titanic because the Classic environment is no longer supported." I'm wondering how I will be able to get this to work on my MacBook. I've read a few sites which talk of some sort of emulator, or mounting it with Roxio Toast? Is this correct?

    Believe it or not you may have an easier time running that program in Windows on your Mac! That game was made for Windows, and there is better old Windows support for Intel Macs than there is Mac OS 9 support. See my FAQ*:
    http://www.macmaps.com/macosxnative.html#WINTEL
    And see http://www.macmaps.com/macgamepages.html
    to see if there are any patches to make it Mac OS X Intel compatible.
    - * Links to my pages may give me compensation.

  • Classic Application SKPlugins in Core Services folder.

    I noticed that I have a folder, SKPlugins (Classic Application plugins) in my Core Services folder. They have the slash through them, meaning they are invalid for my OS. I'm guessing they may have come from a data transfer from my iMac G3 when I got my iMac 5,2.
    I'd like to trash these, but thought twice and searched for a clue about them. I haven't had any luck researching this. Can I trash these without causing a problem? Did they come from the transfer?
    iMac5,2 (17 inch monitor)   Mac OS X (10.4.8)   Previous computer: iMac G3 w/o Firewire (8/2000 - 10/2006).

    Welcome to the Apple Support Communities
    Try deleting the Dock settings file. First, open Finder, select Go menu > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.dock.plist" and restart the Mac

  • Automate a task with a Classic application?

    Hi
    I need to automate a task with a Classic application, is Automator suitable for this? If not, anyone knows what I can use instead?
    Thanks

    It's pretty hard to do that without having the application to play around with. Most likely the easiest way to try is by UI key commands. No promises, but can you see if you can preform the entire function you want to do without using the mouse. Then write down exactly what key commands you did and post them. I'll try to write a script for that. I can't think of any other plans. Have you got any other ideas, Ric?
    --Justin S.

  • OSX application icon showing up as classic application

    I connected a mac to another user to use it's Excel program. For some reason the icon changed on me showing a circle with a slash and has an indication that it is a classic application. This is a Microsoft Excel X for Mac. The icon shows up fine in the user's mac. I tried to connect a different Mac and the icon shows up correct and will open up. For some reason this one Mac is showing it as a classic app and won't open up since the system won't let it. Is there any way I can fix this icon. This mac has used this Excel program before. For some reason the icon changed on it today.

    The icons for Office X are very similar to Office 2000. Verify the application in question on the Mac in question isn't a Classic Application. Sometimes some applications don't allow multiple computers to run themselves and limit their license too. http://www.neooffice.org/ is a good free alternative to Excel X.

  • Using safari as web browser in a classic application

    I have version 5 of adobe go live and I use it in classic mode in osx.4.8. In order to create my web site I need to specify safari as the web browser, can this be done?

    Hi katharineimac;
    I tend to agree with Tom that you are going to have difficulties using Safari from a "Classic" application like Adobe Go Live. Have you attempted to save your web page to disk and then attempt to open it from Safari?
    I think by using such and old outdated application you are leaving yourself open to more problems then just the inability to open with Safari. As Tom says there are vastly improved applications available on OS X today that can be used to replace what you are currently using.
    Allan

  • With DRM should we prefer EPMA or Classic application

    Hi,
    We have bought DRM and now are considering whether to build an EPMA or Classic application. Are there any specific benefits of EPMA application with DRM in place. Any suggestions will be helpful.

    Just out of interest how are you going move the metadata from DRM to Planning.
    Though to be honest if you are managing your hierarchies in DRM I wouldn't see much advantage to then push it into EPMA to manage the hierarchies for a second time.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • How do I transfer files from my old laptop with a broken screen to my new macbook pro?

    I recently purchased a new macbook pro and would like to tranfers files such as music and documents from my old sony vaio laptop. The problem is that the screen on my old laptop is broken so the image is distorted and I cannot see a thing, which mean

  • Hard binding in solaris 10 with a SUN card X6768

    Is there any firmware for a SUN card X6768 which allow to make "hard binding" between a target and a router. The only one driver that I have find run dynamically.

  • 'Data' option in Web template

    Hello Experts We have a web template with the option to pre-calculate the data and store it. Under 'parameter' tab of the web template, in the top left corner, i have the option 'Calculate' - and there are four options available to store the data aft

  • DIT Design -- Handling users in overlapping & changing groups/institutions

    Hi Folks- [My Apologies if there are duplicates, the forum doesn't show any sign of accepting this] I've been working on a DIT Design to solve a set of business requirements which conflicts with most traditional approaches. I've got some (overly) com

  • Is there anyway to parse all Date format?

    I have a string here which represents a date, but the problem is that it could be in mm/dd/yy or yyyy.MM.dd format, how can I make my parse to recognize all format might appear? Thanks in advance