Classify gl for doc spllitting warning message

I have two GL account configured in "classify GL for doc spliitiing" in new GL, one is cash account, category 04000, the other is normal B/S acclount, category: 01000, when I click proposal, the cash account giving warning message, but the normal B/S account status is green, why warning, how to make it green? thanks

Hello Siva,
Would you please elaborate your exact issue ?
I mean in which transaction you click proposal and what Warning Message exactly you getting?
Regards,
Manish

Similar Messages

Mail not delivered for 4 hours warning message

I've recently started getting .mac mail bounced back to me from MAIL DELIVERY SUBSYSTEM saying that the message couldn't be delivered for the past 4 hours and would continue trying for 4 days. They never seem to go through.
This only happens with mail to my parents. I can send them mail from a different ISP account, and my husband can send them mail from his .mac account. I have not changed my preferences and neither have they. I would suspect their ISP, except that my husband's .mac mail goes through.
Any idea what the problem might be? Here's the relevant information from the warning message:
<parents' address>...Deferred:Invalid argument
Warnng: message still undelivered after 4 hours
Will keep trying until message is 4 days old
Reporting-MTA: dns; smtpout.mac.com
Action: delayed
Status: 4.4.2
MacBook Mac OS X (10.4.7)

You are apparently not alone - this from Macfixit today:
Updated Friday, February 09 2007 @ 09:15 AM PST
Today's Featured Article
Late-Breakers
.Mac outages, problems accessing email (#2): possible fixes
Users are continuing to report (in droves) problems accessing .Mac services -- particularly mail -- over the past few days.
Most reports indicate problems accessing .Mac mail from within various clients, including Mail.app. As such, the best stop-gap solution is to simply use the .Mac webmail interface in most cases
However, some users have also reported problems receiving messages through the webmail interface.
MacFixIt reader Michael Novelli writes:
"My .mac mail account stopped working yesterday. I can access it online."
Another reader adds:
"Same issue here with .Mac email. If I look at the Activity Viewer I can see my other email accounts connect and finish but .Mac just hangs with the blue and white candy cane progress bar. .Mac has become so unreliable that I cannot use it as my main account and have chosen another email service."
MacFixIt reader Jim writes:
"I am also encountering problems accessing .Mac mail with Eudora. Mail is apparently going out using .Mac and Eudora, but the problem is receiving mail."
Tom James reports issues with other areas of .Mac service:
"In addition to the problems accessing .mail via Mail, I had a problem today updating my .mac website. The server consistently refused to make changes to the welcome page even though iWeb organiser reported that the site as amended had been published. Deletion of the site in iWeb and creation of a second site initially did not work either but it n ow appears to have been updated. Perhaps there were delays in implementing changes due to the creaky nature of .Mac servers."
Possible fixes
Clear caches We've received unconfirmed reports that running the maintenance routines offered by AppleJack can resolve some .Mac connectivity issues -- potentially indicating cache corruption as a cause of problems. Cache cleaning can also be accomplished with tools like Cocktail or Tiger Cache Cleaner.
Just restart In other cases, a simple restart can have a beneficial effect. MacFixIt reader Tracey writes:
"I also experienced the .Mac mail connection problem yesterday utilizing Mail.app Version 2.1.1 (752.3). In my case, after a half an hour of being unable to connect, it finally dawned on me to go back to the basics of troubleshooting. After a reboot, and a subsequent relaunch of Mail.app, my .Mac mail became immediately responsive, and has been working without a glitch ever since (24 hours). It was a pretty simple fix in my case (or a serendipitous coincidence of timing)."

Which function module i should use in mereq001 for warning message

hi all,
when creating purchase requistion(me51n) with item and plant and material etc.when we enter different plant for the second item which is not there in first item. we should get the warning message in the popup
for this i have used
fuction module EXIT_SAPLMEREQ_005
written the following code.
INCLUDE ZXM02U05                                                   *
CHECK SY-TCODE = 'ME51N'.
TABLES MARC.
DATA : BEGIN OF I_MARC OCCURS 0,
       WERKS LIKE MARC-WERKS,
       BNFPO LIKE EBAN-BNFPO,
       END OF I_MARC.
DATA : I_WERKS LIKE MEREQ_ITEM-WERKS.
read table I_MARC index 1.
if sy-subrc <> 0.
IF I_MARC-WERKS IS INITIAL.
   I_MARC-BNFPO = IM_DATA_NEW-BNFPO.
   I_MARC-WERKS = IM_DATA_NEW-WERKS.
append I_MARC.
endif.
MOVE IM_DATA_OLD-WERKS TO I_WERKS.
elseif IM_DATA_NEW-BNFPO > I_MARC-BNFPO
       and I_WERKS <> IM_DATA_NEW-WERKS.
CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
    EXPORTING
    TITEL         =
      MSGID         = 'ZMMMSG'
      MSGTY         = 'W'
      MSGNO         = 001.
    MSGV1         =0
    MSGV2         =
    MSGV3         =
    MSGV4         =
ENDIF.
but after entering the data for first item 00010 ,data is storing in the internal table. but when i entered the data for item 00020 it storing the data in internal table. but item 00010 data is not appearing in the internal table when we give item 00020 data . i have checked in the debugging.
please advise me what to do for the above requirement.
thanks in advance
rama.

Hi Roy,
You should use BI SDK for Java to connect to BW from Web Dynpro (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20use%20the%20bi%20java%20sdk%20in%20a%20web%20dynpro%20application.pdf)
http://help.sap.com/saphelp_nw04/helpdata/en/6e/011e681cf74ab4b3acf73f77653405/frameset.htm
https://media.sdn.sap.com/public/html/submitted_docs/BW/BI_SDK_JavaDocs/bi_sdk_doc/docs/documentation.html
/people/moya.watson/blog/2004/04/05/the-bi-java-sdk-whats-in-it-for-you
/people/moya.watson/blog/2004/12/27/three-new-how-to-guides-for-the-bi-java-sdk
Best regards, Maksim Rashchynski.

Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

How to supress a warning message in BDC for ME11 Tcode

Hi Expert,
I am doing a BDC report for ME11 Tcode and some of warning is ignorable for this transaction code,how can we suppress these warning through BDC program, is it possible or will have to make some changes changes in TCODE(ME11) itself.

hi,
if the warning message coming in a pop-up window then it can be supressed in the following way.
1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code '=ENTE".
2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
call transcation 'ME11'
using bdcdata
options from opt ( structure of ctu_params )
3. At the time of recording use the option of check box " no batch input session ".
regards,
Alok

BI Publisher report ends with Warning Message for Pivot type reports..

Hi,
I had used BI reporting(xml publisher) to develop our all reports and registered in R12 and works fine for all the tabular/forms type reports but it fails with the warning message(colored in yellow) for Pivot type reports. The output comes in xml..
When I changed the pivot table type report to tabular it comes with pdf. No issues.I do not know how to solve this issue...
Please help me on this..
Thanks
Imran

Welcome to the forums !
Pl post details of OS, database and EBS versions, along with the complete error message.
HTH
Srini

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

HT1848 i Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

I Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

Well Authorize the Computer...........

Warning message at the time of GR for a material with Batch Management

Dear All,
   I am new to MM,
     We are using batch at plant level. For some materials user dont want maintain
     Batch classification in Material Master. At the time of Goods Receipt posting with ref-to PO user getting warning message like <b>For batch 0000000139 of material 212030602400000 4F10, no class could</b>. I check system messages setting transaction code OCHS for batch management, but I didnt found this type of message in the list.
Plzz can any one help me where I need to change system settings?
Thanks in advance.
Meeravali shaik.

HI,
Check in the IMG node Logistics general > Batch Management > Define attributes of system messages.
Regards,
RitiG

BADI/user exit for ME21N - Warning message for "our reference" field

Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
Ahmad

Hi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal.

Warning message during batch determination while doing GR for process order

Hi Experts,
During delivery against process order for all SFGs and FGs, we are getting warning message u201CInvalid batch according to selection criteria in batch determinationu201D.
Following settings maintained for batch determination in process order.
Condition table for order/material type maintained
Access sequence maintained for order/material type
In strategy type above access sequence has been maintained. The common class and sort sequence created for all materials in the plant have also been assigned to this strategy type. In batch split changes allowed box has been checked and quantity proposal maintained as 1.
In search procedure control maintained for order/material type. Search procedure has been assigned to all process order types and check activated.
In spite of the above when GR for order is taking place , system is throwing warning message.
GI of components is being done through backflush and without any warning message.
Please advise how to ensure proper batch determination during GR against order.
Regards
Sm.

Issue resolved by removing required indicators from characteristics which were not being valuated but were maintained in the class assigned to SFGs/FGs.
Regards
Sm.

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

Warning messages for purchage order date?

Hi Friends,
I am ABAP developer, and I am developing one webservice to create value contract from dotnet front end,
So user can enter inputs from that front end and he will get SAP generated value contract id.
Here I did validations for all the fields and giving error messages to restrict user to dont give incorrect values.
Now coming to my issue..,
While entering the PO Date in the initial screen of contract creation,
If I enter future date,
> The purchase order date lies in the future. Please check
If I enter the past date.,
> The purchase order date is in the past. Please check
I will get warning messages like this, so what should i do, I can enter, today's date to avoid these messages,
And I can neglect these two messages to proceed, as they are warings only.
But in my case , Can i process these messages to front end, Is it mandatory.
I want to know the intention of these messages, then i can proceed.
Thanks,
Naveen.I

Hi,
It is telling an information about the date status and n=it is not an error message.
so you can go ahead with this message.
If you want the same message in front end then you can write the logic in the dotnet prog.
Regards,
Sumith

Classify gl for doc spllitting warning message

Similar Messages

Maybe you are looking for