CLDC emulator is not showing windows mobile emulator as a registered device

Hi,
I want to run one J2ME application on windows mobile 6 emulator. I have done the setup using CLDC emulation on windows Mobile Emulator.
After doing installation of CLDC on emulator, need to register the emulator IP address in SDK. Done that using device-address.exe . Its done successfully.
Though device manager shows IP as its registered address, but emulator does not show the device emulator in its devices list.
emulator.exe -Xquery ------------> does not show windows mobile emulator it its devices list.
Can anyone please help for this. Without this am not able to run my J2ME application on windows mobile emulator.
FYI: I have installed MS Virtual PC but windows mobile 6 emulator is not binded to Virtual Machine Network Services Driver. Because, I am not getting this in drop-down list of adpaters.
I believe it will not make any effect.
Please help.

bkbooth11 wrote:
Hey,
I tried connecting my iPhone to a friends Mac and I wasn't able to see the photos in iPhoto either.
I have solved the problem though, well not me really, I found it in one of the other threads on here about not being able to see the iPhone on iPhoto.
Go through your Camera Roll and get rid of all the pictures in there that weren't taken with the iPhone camera, I had pictures in there that people had sent me via MMS and pictures that I had downloaded from e-mails. I e-mailed myself any important pictures and deleted the rest, leaving just all the photos I had taken with the iPhone camera. Connected to the computer and the iPhone is showing in My Computer again.
Hope this helps everyone here.
Thanks bkbooth11 I did as you suggested and that fixed the problem. Hopefully they will patch that soon as it is rather inconvenient.

Similar Messages

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

How open a file and not showing window?

I write a script to do some work automatic,
for Indesign script, its application open method could open a file and not showing window,
the open method has a parameter [ShowingWindow] (if true, show the document window).
That is good a feature for me.
But with Illustrator, the application open method hasn't the same feature.
Open
(files as String,
[documentColorSpace as AiDocumentColorSpace],
[options as Object])
and for OpenOptions properties, there is not useful information for me.
Is there any other methods could do that?
Any help is greatly appreciated.

Thank for your reply.

HT1539 Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices.

Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices. This is the first time I've encountered this issue. Package insert says copy is iPad compatible. Is there anything I can do to fix this? (The movie was Kung Fu Panda)

it's a known issue. Everyone is experiencing this issue. Give it time for Apple to rectify the issue.

HT4236 What do I do if "photos" is not showing up as an option under "My Device" in the iTunes window?

What do I do if "photos" is not showing up under "My Device" when I plug my phone in and the iTunes windo opens? I had my phone reset yesterday b/c of picture texting/software problems. It wiped it clean! I had to start again like it was a NEW phone and use my backup info on my computer to sync my information. I have restored my contacts, calendars, music, etc...but, I can't get my pictures back. HELP!

If the iTunes window is set as wide as possible on your computer screen, try changing your computer screen resolution

Not Show Window Size?

Can I make it so the window size does not show up in my windows name?
When i hover over PS icon the windows name is:
File.name @ 137% (Layer 0, RGB/8)*
Can i edit this at all?
thanks

No. This is operating system stuff. But you can set the pref in PS to at least not treat every Window separately in Aero Peek. That way they only show up as "Adobe Photoshop"...
Mylenium

[Solved] Grub not showing windows partition

Hey all,
So I tried setting up my Win7/Arch dual boot system yesterday and I think I got the partitions right (correct me if I made any mistakes), but GRUB was not showing my main windows partition. I went into the menu.lst file and uncommented what I thought was my windows partition, but turned out to be my Samsung recovery partition. After a reboot, Grub now won't even load and automatically reboots the computer on failing. I'm sure that once I can figure out how to get back into that config file from my installer CD, I will be able to re-comment that windows entry, but I still am unsure how to get it to recognize my main windows partition.
Here are the partitions:
Name Flags Part Type FS type [Label] Size
sda1 (Boot) Primary ntfs [RECOVERY] 16GB
sda2 Primary ntfs [SYSTEM] 104MB
sda3 Primary ntfs 372GB (main windows7 partition)
sda5 Logical ext2 [root] 15GB
sda6 Logical swap [swap] 4GB
sda7 (Boot) Logical ext2 [boot] 100 MB
sda8 Logical ext3 92GB (home Linux partition)
Thanks for your help
Last edited by RichardPW (2011-12-05 00:01:57)

Okay so first I tried recommenting all of the windows boot information with no luck. Then I changed the windows line to "rootnoverify (hd0,1)," also with no luck. Grub still tries to load but crashes and reboots the system before presenting me with any options.
Here are the options, if this helps at all.
# (0) Arch Linux
title Arch Linus
root (hd0,6)
kernel /vmlinuz-linux root=/dev/sda5 ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,6)
kernel /vmlinuz-linux root=/dev/sda5 ro
initrd /initramfs-linux-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,1)
makeactive
chainloader +1

Camera icon is not showing and mobile gets overheated quickly

The camera icon is not showing And I can't access camera and the device overheating quickly

You could simply access the camera by pressing and holding the camera dedicated key which is placed at the bottom of all other bottons. Was your device every exposed to water? That could also be a reason of heating up. But if no , then you should turn off your device and wait about 10-15 minutes. After that power on your device and change the screen brightness to automatic or lower the brightness . You could also turn off Auto-sunc Data , location NFC , bluetooth. I know that playing boom beach with maximum screen brightness will really heat up your device but i never had a situation where my camera get's closed beucause of the heat. I had warnings that the device is getting warmer . If its possible press dont show again and OK and if the message gets closed you should be able to take some pictures.

Navigation Menu not showing in mobile

I'm working on this website and when I view the site on my iPhone, the navigation menu is not showing. Any advice on what is preventing the menu from showing?
Thanks in advance for your help,
Michael

That was it Ben. This site is actually one I designed several years ago and the customer just wanted to make some changes to color scheme and add a few new tabs. Figured I would add a dropdown menu to better accommodate the additional pages and found a nice nav menu online. I didn't see that the styles had media queries. I have not begun to code them myself yet, only have worked with responsive formats with Wordpress.

Not show window(anti-aliasing X2, anisotropic filtering X2)

Hi.
If i set video card anti-aliasing X2, anisotropic filtering X2 than do not show JFrame.
Please help me.
show this image...
http://www.fifabattle.net/zeroboard/data/fbnnewqna/java.jpg

I ran into a related problem when I created my own View class for a custom JTextComponent. In the built-in View classes, antialiasing is applied via package-private methods of javax.swing.text.Utilities, which in turn call methods of the non-public SwingUtilities2 class. There is no way short of reflection hacks to tap into the automatic AA mechanism from a third-party View. And just to give the nipple an extra twist, they also moved SwingUtilities2 to a different package in JDK 1.6, making it all but impossible to achieve reasonably consistent behavior under both Java 5 and Java 6. I still can't help wondering if they implemented the AA mechanism the way they did just to piss me off.

KDE4.1 Do Not Show Windows From All Desktops

So how do I make my KDE4.1 desktop show windows on their own desktop and hide the buttons in the taskbar when I'm on a different desktop? This could be done in KDE 3 I remember.

miggols99 wrote:Easy. Right click task manager, and choose "Task Manager settings". Then tick "Only show tasks from the current desktop".
It's always right under your nose, isn't it...
Thanks for the help bro!

Most of my movies are not showing up in my library or my devices. what can I do?

Out of all the movies Ive purchased only 4 or so are showing up in my library and same with my ipad which used to display all my movies even if they were not downloaded onto my ipad. how do I fix this?

Hey there La Reveuse,
It sounds like your iOS devices and computers are not showing your Movie purchases from iTunes anymore that are not downloaded to them. On your iOS devices you can check to see if the option to show all your movies is enabled in Settings > Videos. On your computer(s) this option is labeled Show iTunes in the Cloud purchases in its preferences.
iTunes 11 for Mac: iTunes Store preferences
http://support.apple.com/kb/PH12263
or
iTunes 11 for Windows: iTunes Store preferences
http://support.apple.com/kb/PH12468
I if this is enabled on your devices, I would next check to see if the purchases have been hidden with this article:
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
Thank you for using Apple Support Communities.
Regards,
Sterling

Itunes 11.1.1 not showing iPhone 4s IOS7.0.3 as device

Help !!
I have recently updated my iphone 4s to iOS 7.0.3 & running latest itunes version 11.1.1 on my iMac. My phone does not show as a device in itunes anymore & same also for another iphone 4 that also normally syncs with this same iMac. Without any device I can not Sync anything including photos. Please assist with solution?
I have tried various USB cables & ports so this is not the problem. Iphones still charging when plugged in to USB/iMac.

Next thing to check is if your Mac can see your iPhone:-
Whilst your iPhone is connected with your USB cable, open "About This Mac" from under the Grey Apple (top left of screen).
Click on the button "System Report", then from the window which opens click on "USB".
If your iPhone doesn't appear there, we've established that your Mac can't see it, but at this point it could be a duff USB port - I presume you've tried another port - or a duff cable, or even (hopefully not) a duff connector port on the iPhone.

Tax Condition ZSRT not showing in Print Preview and Tax Register

Dear Friends
while we making Purchase Order the Tax condition not showing while print preview. also not showing in Tax Register.
Tax Register we developed.
any hops
Rajesh G

Dear,
ZSRT is a customised condition which you have created. So to bring that condition in print preview you have to talk to your ABAPER , so that he can incorporate this condition type to his customised print preview program. If your tax register is also customised then again you have to communicate to the ABAPER.

CLDC emulator is not showing windows mobile emulator as a registered device

Similar Messages

Maybe you are looking for