Clean Install around Boot Camp partition with time machine file restore

Currently at 10.5.8 on MacBook with a bootcamp partition. I am wondering if I can:
Make a timemachine backup
Wipe the mac partition, leave bootcamp partition alone
Install clean 10.6 OS
Use Time Machine to restore non-OS docs, apps, and other files
Just asking...

Yes, you can. Perform the erase and install normally and then either use Time Machine or the Migration Assistant to restore the backup.
(46800)

Similar Messages

Issues with Time Machine File Restore Permissions and Interface

Hi All,I bought a Time Capsule in January 2010, and i've had backups since then.
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Anyway, I went to open a folder in a virtual machine which resides in my mac's documents folder, and it wasn't there. Sure enough this folder wasn't in my documents folder, so I thought i'd restore it from time machine. Time machine shows every segment as a pink fully coloured one (signalling theres a backup there) for a few secs, before most of them turn into a pale pink. Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat - never had a problem doing full restores or migrations, just using the interface)
Obviously the easiest thing to do would be to start afresh, but I'd rather not as I'd lose 2 years worth of backups, and who's to say this wouldn't just happen again in the future? Could this be why the interface is so slow too?
Thanks guys

studentguy wrote:
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Yes, there is a lot going on to "populate" the display -- it can be sluggish even to a FireWire 800 drive.
Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I don't do Windoze, so am not familiar with the structure of the VM files, or how the permissions on them work. Many folks exclude them from Time Machine, and back them up separately.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat
Yes, because it simply copies whatever permissions are there. It doesn't need to (and shouldn't) check whether the logged-on user has permission to anything.
Could this be why the interface is so slow too?
It could be a contributor.
Can you set the permissions on the VM files on your Mac so everyone has read rights? That should at least allow you to restore their backups.

Delete Boot Camp Partition with Lion

To Delete boot camp partition with lion
follow steps below : -
• open finder and goto applications folder then open utilities folder ,select Boot Camp Assistance
•now click on continue to go to next screen select "i have already downloaded the windows support fro this mac to a CD ,DVD or external disk" then click Continue
• you have 3 options to choose choose add/remove boot camp - and continue from there
Phewwwwwww gone

Check partition table health in Lion's Disk Utility
Manage all partitions with Disk Utility in OS X
Managing Lion restore drive MacFixIt
Did you get anything like this:
Lion: Installer reports "This disk cannot be used to start up your computer"
Shows how to shrink Mac HFS before upgrade to Lion, and to create free space between Mac and Windows partitions.
OS X Lion: "Some features of Mac OS X Lion are not supported for the disk (volume name)" appears during installation
OS X Lion Install to Different Drive

I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?

I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?
And when I try to add a partition to the free space, and try to apply I do this:
I press apply and it does its thing for like a second, I switch tabs and I get this:
No matter how many times I reboot it doesn't work. Please help

diskutil list:
diskutil mergePartitions:

Does OS installed through boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?

I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S

adnans wrote:
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S
1. Yes. You can install Windows 7 natively using Boot Camp Assistant or you can install Windows 7 in a virtual machine using Parallels, Fusion, or VirtualBox
2. If installed using Boot Camp Assistant Windows 7 uses all your computer's resources just as OSx does. If installed using a VM Windows 7 will share the computer's resources with OSx.
3. A Boot Camp partition is separate from the OSx partition. The VMs allow sharing of files across partitions since both OS are running at the same time.
4. No, not 100%.
5. Too broad a question. Be specific about what feature you are asking about or search the Internet for comparisons. I use both and find they both work well.

After a clean install, how can I continue using Time Machine?

After a clean install, how can I continue using Time Machine?
I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
Is there any way of picking up where I left off?

Hi Frank,
You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
When you open iCal what do you see? Are the calendars the two default Home and Work ones?
I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
Why, do you have something against London Ontario?
John M

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

How do I create a Boot Camp partition with Windows & blank NTFS partitions?

I'm trying to create this kind of setup:
OS X partition
Windows 7 partition
blank NTFS partition (no OS)
blank NTFS partition (no OS)
This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
What would the best way to achieve this setup?

Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
You can boot to either OS and access any partition.

My sound no longer works on Mac OS after installing a Boot Camp partition for Windows 7 x64.

I installed Windows 7 x64-Bit Professional Edition on my iMac Mid-2011 on Yosemite 10.10.2 through Boot Camp. I installed Windows 7 without any hitches and I proceeded to install an old PC game and I was able to run it just fine, I could here the audio perfectly. But, the next day, when I started my iMac on the Mac OS partition, the sound bar icon on the top right was greyed out. This problem began occurring after I restarted to the (original) Mac OS partition I've tried to check it out on System Preferences and Audio MIDI Setup. On Sys Prefs, it says, "No output devices found" and "No input devices found". On Audio MIDI Setup, it says,"No Devices Found on the System."When I go back to the Windows partition, I can hear audio just fine and I can even set the volume from my keyboard. I have already updated the necessary drivers on the Windows side. I've reset the PRAM and repaired the disk permissions with Disk Utility. Headphones don't work either but I can send audio through a bluetooth speaker that I have.

Hi 0day,
unfortunately you have to have the MacOS DVD to install the Boot Camp 3 (legally).
The 3.1 and 3.2 are upgrades to that (as you found out).

How-To Delete Boot Camp Partition with Parallels Configure to Access It

Hi Everyone,
I would like to delete my boot camp partition from my MB to reclaim some space due to the increasing storage demand from iTunes library? (I need to find out what can I do when the library is getting larger than my HD too, but that's another topic...)
I also have Parellels Desktop configure to access the boot camp partition instead of creating its own virtual hard drive. I'd like to know if there's any problem with my parallels after I delete the boot camp hard drive? Will I have to reinstall my Windows XP OS again after deleting the partition?
Thank you,
Nacintosh520

Hi Eric
Are you saying that I have to reinstall my Windows XP OS all over again, with the patch and everything after deleting the BC partition? Is there a way to create a virtual hard drive from the BC partition of what I have? It's such a time-consuming process that I have to tweak the OS to the way I'd like it.
I wonder what solution will Apple offer when they offer more and more content, and space for each computer is limited. I did some research on this issue and it turns out that the solution is the set the option in iTunes to "Manually manage my music files" in the Preferences panel. I don't want to do this because if I set this option, my files won't be organized any more, and it's gonna be all over the places. But I guess I have to do this until Apple offer an option such as "Move my Podcasts file to _ external hard drive" to keep everything stay organized.
Thank you,
Nacintosh520

Install a Boot Camp partition without access to OSX files.

I Want to use a boot camp partition so that windows can use all my ram (windows 10 is really slow running alongside Yosemite in virtualbox). Is there software that I can install or something special I can do to install windows in a way that it won't be able to access the files on the Mac side? I don't want the security risks of windows getting through to the Mac bit. So, is there something that can out up a barrier between the two?

Webmaster4o wrote:
Is there software that I can install or something special I can do to install windows in a way that it won't be able to access the files on the Mac side? I don't want the security risks of windows getting through to the Mac bit. So, is there something that can out up a barrier between the two?
The choice to install Windows is an invitation to security risks. It does not mean OS X does not have its own security risks. All OSes do. Windows has more widespread malware, viruses, etc. Windows has read-only access via Apple HFS+ driver to OS X volumes (this is installed as part of Bootcamp Drivers package).
You have two choices,
1. Install FileVault2 - OS X: About FileVault 2 - Apple Support.
2. Convert your HFS+ volumes to CoreStorage. See the help about diskutil cs convert. Please also see https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/diskutil.8.html
diskutil cs convert
Usage: diskutil coreStorage convert
MountPoint|DiskIdentifier|DeviceNode
[-stdinpassphrase | -passphrase [passphrase]]
Convert a regular JHFS+ partition into a CoreStorage logical volume.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk is required.
Either method removes read-only access to OS X side.

Clean install - reinstall data & settings from last time machine backup

My machine is really slow, the beach ball is spinning all too often - it's time for a clean install Snow Leopard
I have already done a final time machine backup. I want to restore email and accounts, safari settings, iTunes music and Document files - nothing else.
How do I do this without reinstalling the whole backup I've just made? Can I easily cherry pick the bits I want?
Thanks in advance
Matt

MATT-MAC wrote:
My machine is really slow, the beach ball is spinning all too often - it's time for a clean install Snow Leopard
I agree with Barry; that's rarely very helpful on OSX. See below for some suggestions.
I have already done a final time machine backup. I want to restore email and accounts, safari settings, iTunes music and Document files - nothing else.
How do I do this without reinstalling the whole backup I've just made? Can I easily cherry pick the bits I want?
To a degree, yes. See #15 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for the procedure to restore selected items, and #28 for the location of some common data files.
|
One frequent cause of performance problems is simple: not enough free space on your OSX disk. If there's less than about 15% free (perhaps less on a large drive), your Mac will probably begin to slow down noticeably.
Another is "leftovers" from applications that weren't completely deleted. One clue to that, among other possible problems, is the size of your logs. See the green box in [OSX Log Files|http://web.me.com/pondini/AppleTips/Logs.html]. If yours are large, it will show you how to find and deal with the culprits.
Another is running anti-virus software on OSX. Other than ClamXav, most of it is not only unnecessary, but more of a problem than having a virus! See Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/thomas/guides/macvirus].
If you suspect an actual problem with your installation of OSX, start by downloading and installing the 10.6.5 "combo" update. That's the cleverly-named combination of all the updates to Snow Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/kb/DL1324 Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.
If that doesn't help, reinstall OSX from your Snow Leopard Install disc (that won't affect anything else), then apply the "combo" again.
Also see:
http://www.thexlab.com/faqs/performance.html
http://www.thexlab.com/faqs/lackofram.html

Installing a new harddrive and using time machine to restore old files

I want to replace the old 250 gig harddrive on my Macbook pro with a new 750 gig one I just purchased. I have made backups with time machine and have heard that after you install Snow leopard on the new drive you can just create your old computer with all the files back in place with the time machine backup you made from the previous drive. Im sure plenty of you have done this I am just wondering how it went and some tips of how to not mess this up. One question I have is do I need to do all the Snow Leopard updates for the system (I think my disc is 10.6.4) , or iTunes,quicktime etc, or will that all be resolved with the time machine restore. Same goes with iLife, should I install iLife first or will that come over with the time machine restore. I think im thinking into this too much but just not sure how this all works. Thanks for your help!

Prepare your new drive:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. You will have an option appear to restore from a TM backup. You can select that option or you can complete the installation of OS X. Upon completion of the Setup Assistant you can opt to restore from an external drive or a TM backup.
Be sure your TM backup drive is connected and powered up. If all else fails you can always finish the installation and the reboot, then restore from your TM backup using Migration Assistant.

MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.

The language of my Keyboard is French

Clean Install around Boot Camp partition with time machine file restore

Similar Messages

Maybe you are looking for