Clean up after error

When my program has an error, I am able to catch it but it's like the program doesn't exit normally. Something is not being cleared out because the program won't run properly again once the error has occurred. Is there a command that will clear out all variable including system variables and deallocate all memory that I can run when the error occurs?

It's a suggestion to the GC to execute. it does not mean the GC will actually run. In fact, the GC might not even execute at all.
Bosun

Similar Messages

LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
Environment must be closed, caused by:
com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
likely invalid. Environment is invalid and must be closed.
at
com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
ion.java:196)
at
com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
at
com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
at
com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
... 11 more
Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
because of previous exception: (JE 4.1.10)
/scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
IN=368491717 IN class=com.sleepycat.je.tree.IN
lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
invalid and must be closed.
at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
at
com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
at
com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
------------Configurations-------------------------
EnvironmentConfig.ENV_RUN_CLEANER -> false
EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
EnvironmentConfig.CLEANER_EXPUNGE -> false
Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
Anfernee

Anfernee, I will contact you via email.
--mark

How to clean up propagation error?

I have Asynchronous Distributed Hotlog CDC setup between a 9.2.0.8 (source) and 10.2.0.3 (staging) databases. There was a temporary lost of network connection between the two db and the source database is now reporting a ORA-12535 during propagation error.
SQL> select instance, last_error_msg from dba_queue_schedules;
1 ORA-12535: TNS:operation timed out
The network is now ok but the error does not go away. How do I clean up the error to continue propagation w/o dropping and creating the entire change set?
Thanks.

If stop/start_propagation don't do it, then I would try using DBMS_AQADM.UNSCHEDULE_
PROPAGATION and DBMS_AQADM.SCHEDULE_PROPAGATION
See http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_aqadm.htm#CACDAABD
PS: I have used it in 9i with succes. I recommend you try it in a test environment first.
Regards,

Delivery gets created in VL01N - Return scenario even after error message

Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
Dipak

Hi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak

Illustrator CS3 Crashes after "Error Loading Plugins"

so confused.
Upgraded to a new PC with Windows 7 64bit Enterprise.
Installed my CS3, and Illustrator crashes after "Error Loading Plugins".
I moved the .aip files in question from the folder to my desktop, then put them back, but 3 are still there. The other 3 resolved.
Took the 3 in question back out, then back in. no change
Left the 3 out. No "Error Loading Plugins" but still crashes with a "stopped working" non descript message.
I have been trying to search all over the net for six hours to no avail. Help me Obi Wan Kenobi, you're my only hope.

with Enterprise edition you should be able to download from Microsoft a winXP32 bit virtual OS and run CS3 Ai in that mode.

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

How to make a BPM restartble at a specific point after error?

Hi,
I have a somewhat very simple question.
I have a BPM that works like this:
1. receive message A
2. transform message A to message B (using valuemapping)
3. switch with a condition determining if valuemapping was succesfull for all cases.
3.1. Branch 1
3.1.1. Send message B to R/3
3.2. Branch otherwise
3.2.1. Transform message B to errorMessage
3.2.2. Send errorMessage to R/3
This is all fine and works as intended.
Now what I would like is to somehow be able to "stop" the BPM after step 3.2.2. and somehow be able to reprocess the BPM starting from step 2..
The reason for this is that if the valuemapping was unsuccesfull it means a table needs to be updated. After updating the table it would be nice if the process could just be restarted and complete with success instead of having to send data through XI once again from sending system.
I've tried to experiment with exception handling in the BPM, but have not been successfull in finding a solution that works as intended.
Hope someone can help:-)
Best regards,
Daniel

Hi Kavita,
What I want is this:
If valuemapping is unsuccesfull I want to send errorMessage to R/3. Afterwards the BPM should stop. At some point someone (or XI ifself) will try to reprocess the BPM. In this case the BPM should basically start from my previous step 2 (Transformation step with valuemapping) and then go through it all again.
I a litle unclear what exactly you want me to try - is it something like this you mean?: - but what exactly goes in the exception branch? The time part I guess can be left out in my case, since I just wanna stop right away - but still we the posibility of starting from valuemapping step when reprocessing the BPM after error.
1. receive message A
2. Block
2.1. Exception branch
2.2. Control branch
2.2.1. Loop
2.2.1.1. transform message A to message B (using valuemapping)
2.2.1.2. switch with a condition determining if valuemapping was succesfull for all cases.
2.2.1.2.1. Branch 1
2.2.1.2.1.1. Send message B to R/3
2.2.1.2.2. Branch otherwise
2.2.1.2.2.1. Transform message B to errorMessage
2.2.1.2.2.2. Send errorMessage to R/3
Best regards,
Daniel

Prevent automatic workflow restart after error on an interface

Hi, i've got an IDOC-XI-SOAP interface that sends large xml's.
It causes me constants time-outs because, the reciever interface, doesn't send the response until finish processing (more than 3 minutes per IDOC).
I need 2 things to solve this issue.
1- Change the time-out for this particular interface
2- Cancel the automatic workflow restart after error on this particular interface
Thanks for your time,
Roberto

RSXMB_RESTART_MESSAGES program when schedueld in BG restarts failed messages. Hence you can cancel this process. But it will affect other interfaces also.
http://help.sap.com/saphelp_nw04/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/content.htm
I have 1 more Question for you. Are you usigna BPM for IDOC --> XI -- >SOAP?? B'cos IDOCS are aysnc in nature & you are talking about waiting for SOAP response from your receiver.
-SM

IMac27 reboots every few days with message "Restarted after error"

My iMac27 reboots every few days with message "Restarted after error". How do I find out what it is upset about so I can repair?

Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also, OS X- How to log a kernel panic and post a recent panic log (not a crash log.)

Best practices for cleaning up after a Bulk REST API v2 export

I want to make sure that I am cleaning up after my exports (not leaving anything staging, etc). So far I am
DELETEing $ENTITY/exports/$ID and $ENTITY/exports/$ID/data as described in the Bulk REST API documentation
Using a dataRetentionDuration when I create an export (as a safety net in case my code crashes before deleting).
Is there anything else I should do? Should I/can I DELETE the syncs I create (syncs are not listed in the "Delete an Entity" section of the documentation)? Or are those automatically deleted when I DELETE an export?
Thanks!
1086203

Hi Chris,
I met the same problem as pod
It happens when I tried to load all historical activities, and one sample is same activityId was given to 2 different types (one is EmailOpen, the other is FormSubmit) that generated in year 2013
Before full loading, I ever did testing for my job, extracting the activity records from Nov 2014, and there is not unique ID issue
Seems Eloqua fixed this problem before Nov 2014, right?
So if I start to load Activity generated since 2015, there will not be PK problem, or else, I have to use ActivityId + ActivityType as compound PK for historical data
Please confirm and advise
Waiting for your feedback
Thanks~

Import bug (fatal error): SQL Developer 4.1EA2 drops destination table upon rollback after error

I created a table in the worksheet and then I tried to import data into is using SQL Developer EA2. After error is raised, I was presented with the error on the screenshot below. (Note: Rightmost button stands for "Cancel") By choosing cancel (i.e. Click cancel to cancel and rollback.) my destination table is dropped to recycle bin. Rollback should not undo any DDL even when the table was created using the import wizard. But purging a table that was not created by the import wizard is a fatal error.
Steps to reproduce:
create the destination table from worksheet and check if it was created:
column table_name format a21
create table test_imp_rollback_bug(dummy number(2));
insert into test_imp_rollback_bug values (-1);
commit;
select table_name from user_tables where table_name='TEST_IMP_ROLLBACK_BUG';
--Result:
TABLE_NAME
TEST_IMP_ROLLBACK_BUG
import CSV using the import settings attached, To achieve this, utilize the new Restore state of the SQL Developer's import wizard. Note: you might need to adjust schema of the destination table.
test_imp_rollback_bug_numbers.csv
test_imp_rollback_bug-import_settings.sdimp
Upon "Insert failed for rows 1 through 50 " message presented, click Cancel.
The table does not exists any more:
select table_name from user_tables where table_name='TEST_IMP_ROLLBACK_BUG';
--Result:
no rows selected
Edit (jmarton, 2015-04-26):
Software versions used:
SQL Developer version: 4.1.0.18.37
Oracle JDK: 1.8.0_31, 64bit, Linux
Instant client: linux.x64-12.1.0.2.0
Database: 12cR1 12.1.0.2.0 64bit, Linux, EE, CDB-install

select table_name from user_tables where table_name='TEST_IMP_ROLLBACK_BUG';
--Result:
no rows selected
>>Note: you might need to adjust schema of the destination table.
A rollback won't drop a table. Are you sure the tale isn't there? select from dba_tables or all_tables, assuming you had to change the destination schema as indicated in your test notes.

Restart Workflow after error in Production Server.

Hi Experts,
We had a Problem in PO Release in production Server no we have set the release strategy again.
1)Can i Restart the Workflows from that date so that the PO which where in error will work with the new release strategy ?
2) T code to Restart WF after Error is SWPR Right ? or should i Use SWPC
3) Please tell me where to find WorkItem ID
Regards,
Hari

Hi,
if you know for what Key id you had wflow errored out, you can find it. FOr example, any invoice, Notification, etc., go to that document or notification, and click on the "Services for Obj" icon and go to workflow--->wflow over view. THis is how you get to the wflow log. And in that, youcan choose the Technical Details view which gives you the witem id.
Instead, you can use SWI6 and give the BO and exact key and you will get to wflow log..Or you can use Txn SWI2_DIAG..
Hope this helps
venu

Delete session after error 023 and WP has reached abap/heaplimit = 40000000

Hello,
I had upgraded my system's kernel to 7.21 401 last weekend and started getting below errors.
     "Delete session after error 023" and "WP has reached abap/heaplimit = 40000000"
When I change the abap/heaplimit parameter to 6000000000 program runs without error.
This parameter value is out of max value of this parameter.
I donot want to give the parameter over max allowed value.
I also changed dbsl patch to 7.21 418 but no solution.
I searched through sap notes and scn but could not find an answer to my problem.
What could be the relation between kernel upgrade and this parameter?
Why the program was working with Kernel 7.21 316 and not working with 7.21 401?
I inserted SM21 and developer trace file below.
Can you help about the issue, please?
Thanks and Regards,
Yuksel AKCINAR
SM21:
     11:56:52 DIA 010 200 USER1 TX01          R4 7 Delete session 004 after error 023
dev_wx:
L Fri Mar 13 11:52:31 2015
L EVTSDL: Begin of FORM PROCESS_EVENT_TRIGGERED_JOBS
L EVTSDL:    Event raised: SAP_END_OF_JOB
L EVTSDL:    Event parameters: SLCA_LCK_SYNCHOWNERS            10523100
L EVTSDL:    Begin of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL:      Eventhistory > There are no active profiles of criteria type 'EVTHIS'
L EVTSDL:    End of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL: End of FORM PROCESS_EVENT_TRIGGERED_JOBS
L TIMESDL: CLEANUP_MUTEX try to grasp for server:
L TIMESDL: arq01_ARQ_10
L TIMESDL: CLEANUP_MUTEX not grasped (is busy)
A
A Fri Mar 13 11:56:35 2015
A WP has reached abap/heaplimit = 40000000 bytes
A
A Fri Mar 13 11:56:39 2015
A SelMemClass: heap quota (DIA) exceeded 2000000000 2000030480
A
A Fri Mar 13 11:56:40 2015
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
C Call to DbSlRollback96 while DBIF already active in DbSlExeRead96
B ***LOG BZY=> unexpected return code 1 calling DbSlRollback [dbcon        3820]
B ***LOG BYJ=> database function ROLLBACK for connection R/3 failed [dbcon        3823]
B *** ERROR => DISTRIBUTED_TA_FAILED:
[dbcon.c      2029]
B {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0
B 00: name=R/3, con_id=000000000, state=ACTIVE      , tx=NO , bc=NO , hc=NO , perm=YES, reco=NO , info=NO ,
B      timeout=000, con_max=255, con_opt=255, occ=NO , prog=
M ***LOG R39=> ThIRollBack, db_rollback ( 016384) [thxxhead.c   14956]
M in_ThErrHandle: 1
M *** ERROR => ThIRollBack: db_rollback (step 4, th_errno 18, action 2, level 1) [thxxhead.c   11560]
M {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0

Hi Yuksel ,
From the trace file it seems it is a parallel processing Jobs . Has anything changed ( In terms of number of parallel background work process ) in this Job .
If this relates to only one job dont think this increased memory could be because of the kernel patching .
The only thing i could think of is the following ( 1713986 - Installation of kernel 721 (EXT) ) - The note is valid for 721 als
5.6 Dynamic work processes (NetWeaver 7.00/7.01)
The 720 and 721 kernel versions support the dynamic increase of the number of work processes at runtime. However, this function is not fully compatible with NW 7.00 and NW 7.01. To prevent errors from occurring, deactivate it by setting the following parameters:
rdisp/wp_no_restricted = 0
rdisp/configurable_wp_no = 0
rdisp/dynamic_wp_check = FALSE
rdisp/wp_max_no = Sum of:( rdisp/wp_no_dia + rdisp/wp_no_vb2 + rdisp/wp_no_btc + rdisp/wp_no_vb + rdisp/wp_no_spo + rdisp/wp_no_enq ).
Mind that rdisp/wp_max_no has the default value DEFAULT, which will add two unwanted dynamic processes if not set the number of configured, classical wp types.
Check the parameters and try again after a restart .
Believe have seen in many projects functional consultants complaining the issue is after the patch upgrade . Does this fall in that category
Thanks ,
Manu

Edit screen after error message in module pool

Hello Experts,
In our scenario ,we have some checks over inputs given in a table control of module pool screen.Requirement is that after error message we need to display that record of table control in editable mode.
Thanks.

Thanks for the reply...The issue was resolved by dispaying information message and using EXIT to stop program flow.

What is the proper way to reinstall iTunes after error 42404 without losing all my music?

What is the proper way to reinstall iTunes after error 42404 without losing all my music?

Here's what I do when I have iTunes problems and it works 9 out of 10 times. I have Ccleaner; It's a wonderful tool to have. If you don't have it, google it and install it, just the free version. You'll see the list of all of your installed programs in there to unstall (among of a host of other things you could do with that program) but anyway, right click on Apple Software first to repair, when done then right click on Apple Application Support to repair, then when done with that, right click on iTunes to repair that and all should be well after that. No uninstall should be necessary at all when you do all that.

Clean up after error

Similar Messages

Maybe you are looking for